summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/ams-delta.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-07mtd: rawnand: ams-delta: Use GPIO API for data I/OJanusz Krzysztofik1-48/+61
Don't readw()/writew() data directly from/to GPIO port which is under control of gpio-omap driver, use GPIO consumer API instead. The driver should now work with any 8-bit bidirectional GPIO port, not only OMAP. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: ams-delta: Request data port GPIO resourceJanusz Krzysztofik1-2/+9
Data port used by the driver is actually an OMAP MPUIO device, already under control of gpio-omap driver. For that reason we used to not request the memory region of the port as that would fail because the region is already busy. Despite that, we are still accessing the port by just ioremapping it and performing read/write operations. Moreover, we are doing that without any proteciton from other users legally manipulating the port pins over GPIO API. The plan is to convert the driver to access the port over GPIO consumer API. Before that happens, already prevent from other users accessing the port pins by requesting an array of its GPIO descriptors. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Move the ->exec_op() method to nand_controller_opsBoris Brezillon1-2/+5
->exec_op() is a controller method and has nothing to do in the nand_chip struct. Let's move it to the nand_controller_ops struct and adjust the core and drivers accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: ams-delta: Stop implementing ->select_chip()Boris Brezillon1-8/+6
Now that the CS to be selected is passed in nand_operation->cs, we can get rid of the ->select_chip() implementation and replace it by an internal function which is called from the chip->exec_op() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: ams-delta: Explicitly inherit from nand_controllerBoris Brezillon1-0/+5
All NAND objects are supposed to inherit from nand_controller. The framework is providing a dummy controller object, but we're moving away from this approach in favor of explicit inheritance. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: ams-delta: Check mtd_device_register() return codeBoris Brezillon1-1/+7
mtd_device_register() can fail, and when it does we should propagate the error and cleanup what has been done before. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: ams-delta: cleanup ams_delta_init() error pathBoris Brezillon1-14/+12
Remove unused labels, rename out_mtd into err_unmap to make it clearer and return 0 instead of using a goto out at the end of the registration procedure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: ams-delta: Fix various coding style issuesBoris Brezillon1-15/+8
Most of them were reported by checkpatch: * s/u_char/u8/ * remove unneeded blank lines * don't print warning messages when devm_kzalloc() fails * Use ! instead of == NULL * Remove invalid comment Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: ams-delta: Add an SPDX tag to replace the license textBoris Brezillon1-5/+2
Add an SPDX GPL-2.0 tag and update MODULE_LICENSE() to match the license text. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: ams-delta: Allow this driver to be compiled when COMPILE_TEST=yBoris Brezillon1-5/+2
Drop the asm and mach headers inclusion and allow this driver to be compiled when COMPILE_TEST=y in order to increase compile-test coverage. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-11-05mtd: rawnand: ams-delta: Convert the driver to ->exec_op()Janusz Krzysztofik1-44/+56
Replace legacy callbacks with ->select_chip() and ->exec_op(). Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-11-05mtd: rawnand: ams-delta: Stop using legacy .IOADDR_R/WJanusz Krzysztofik1-4/+2
Replace use of legacy .IOADDR_R/W with runtime calculations based on priv->io_base. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ams-delta: Set port direction when neededJanusz Krzysztofik1-17/+40
In its current shape, the driver sets data port direction before each byte read/write operation, even during multi-byte transfers. Improve performance of the driver by setting the port direction only when needed. This optimisation will become particularly important as soon as planned conversion of the driver to GPIO API for data I/O will be implemented. Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ams-delta: Use private structureJanusz Krzysztofik1-56/+66
Introduce a driver private structure and allocate it on device probe. Use it for storing nand_chip structure, GPIO descriptors prevoiusly stored in static variables as well as io_base pointer previously passed as nand controller data or platform driver data. Subsequent patches may populate the structure with more members as needed. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ams-delta: show parent device in sysfsJanusz Krzysztofik1-1/+1
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner set by mtdcore. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ams-delta: use GPIO lookup tableJanusz Krzysztofik1-59/+67
Now as Amstrad Delta board - the only user of this driver - provides GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and use the table to locate required GPIO pins. Declare static variables for storing GPIO descriptors and replace gpio_ function calls with their gpiod_ equivalents. Pin naming used by the driver should be followed while respective GPIO lookup table is initialized by a board init code. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->chip_delayBoris Brezillon1-1/+1
The wait timeouts and delays are directly extracted from the NAND timings and ->chip_delay is only used in legacy path, so let's move it to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon1-2/+2
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon1-1/+1
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon1-3/+3
All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Create a legacy struct and move ->IO_ADDR_{R, W} thereBoris Brezillon1-4/+4
We regularly have new NAND controller drivers that are making use of fields/hooks that we want to get rid of but can't because of all the legacy drivers that we might break if we do. So, instead of removing those fields/hooks, let's move them to a sub-struct which is clearly documented as deprecated. We start with the ->IO_ADDR_{R,W] fields. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->dev_ready()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->dev_ready() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl()Boris Brezillon1-2/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmd_ctrl() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooksBoris Brezillon1-5/+4
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooksBoris Brezillon1-4/+3
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_scan()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-03-15mtd: rawnand: Replace printk() with appropriate pr_*() macroShreeya Patel1-2/+2
Using pr_<loglevel>() is more concise than printk(KERN_<LOGLEVEL>). Replace printks having a log level with the appropriate pr_*() macros. Define pr_fmt() and remove other additional macros from the replaced printks. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-16mtd: nand: move raw NAND related code to the raw/ subdirBoris Brezillon1-0/+291
As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-29 10:28:46 +0000