summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/devices
AgeCommit message (Collapse)AuthorFilesLines
2022-11-07mtd: remove lart flash driverArnd Bergmann3-691/+0
The sa1100 lart platform was removed, so its flash driver is no longer useful. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221021155000.4108406-7-arnd@kernel.org
2022-09-21mtd: add ECC error accounting for each read requestMichał Kępień1-0/+8
Extend struct mtd_req_stats with two new fields holding the number of corrected bitflips and uncorrectable errors detected during a read operation. This is a prerequisite for ultimately passing those counters to user space, where they can be useful to applications for making better-informed choices about moving data around. Unlike 'max_bitflips' (which is set - in a common code path - to the return value of a function called while the MTD device's mutex is held), these counters have to be maintained in each MTD driver which defines the '_read_oob' callback because the statistics need to be calculated while the MTD device's mutex is held. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-4-kernel@kempniu.pl
2022-09-19mtd: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220818210033.7084-1-wsa+renesas@sang-engineering.com
2022-09-19mtd: devices: docg3: Use correct function names in comment blocksColin Ian King1-3/+3
The incorrect function name is being used in the comment for functions doc_set_reliable_mode, doc_read_seek and docg3_probe. Correct these comments. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220805175423.2374939-1-colin.i.king@gmail.com
2022-09-19mtd: devices: docg3: check the return value of devm_ioremap() in the probeWilliam Dean1-1/+6
The function devm_ioremap() in docg3_probe() can fail, so its return value should be checked. Fixes: 82402aeb8c81e ("mtd: docg3: Use devm_*() functions") Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: William Dean <williamsukatube@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220722091644.2937953-1-williamsukatube@163.com
2022-06-24mtd: dataflash: Add SPI ID tableMark Brown1-0/+8
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220620152313.708768-1-broonie@kernel.org
2022-06-09mtd: st_spi_fsm: Simplify error checking in .probe() a bitUwe Kleine-König1-7/+4
Instead of ending each if branch with the same check, do it once unconditionally after the if block. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220607152458.232847-5-u.kleine-koenig@pengutronix.de
2022-06-09mtd: st_spi_fsm: Disable clock only after device was unregisteredUwe Kleine-König1-2/+2
Until mtd_device_unregister() returns the device is expected to be operational. So only disable the clock after the mtd is unregistered. Fixes: 1fefc8ecb834 ("mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220607152458.232847-4-u.kleine-koenig@pengutronix.de
2022-06-09mtd: st_spi_fsm: Warn about failure to unregister mtd deviceUwe Kleine-König1-1/+3
mtd_device_unregister() shouldn't fail. Wail loudly if it does anyhow. This matches how other drivers (e.g. nand/raw/nandsim.c) use mtd_device_unregister(). By returning 0 in the platform remove callback a generic error message by the device core is suppressed, nothing else changes. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220607152458.232847-3-u.kleine-koenig@pengutronix.de
2022-06-09mtd: st_spi_fsm: Add a clk_disable_unprepare() in .probe()'s error pathUwe Kleine-König1-3/+5
For all but one error path clk_disable_unprepare() is already there. Add it to the one location where it's missing. Fixes: 481815a6193b ("mtd: st_spi_fsm: Handle clk_prepare_enable/clk_disable_unprepare.") Fixes: 69d5af8d016c ("mtd: st_spi_fsm: Obtain and use EMI clock") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220607152458.232847-2-u.kleine-koenig@pengutronix.de
2022-06-09mtd: spear_smi: Drop if with an always false conditionUwe Kleine-König1-4/+0
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so dev is never NULL. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220603210758.148493-8-u.kleine-koenig@pengutronix.de
2022-06-09mtd: spear_smi: Don't skip cleanup after mtd_device_unregister() failedUwe Kleine-König1-4/+2
If mtd_device_unregister() fails (which it doesn't when used correctly), the resources bound by the nand chip should be freed anyhow as returning an error value doesn't prevent the device getting unbound. Instead use WARN_ON on the return value similar to how other drivers do it. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220603210758.148493-7-u.kleine-koenig@pengutronix.de
2022-06-09mtd: powernv_flash: Warn about failure to unregister mtd deviceUwe Kleine-König1-1/+3
mtd_device_unregister() shouldn't fail. Wail loudly if it does anyhow. This matches how other drivers (e.g. nand/raw/nandsim.c) use mtd_device_unregister(). By returning 0 in the platform remove callback a generic error message by the device core is suppressed, nothing else changes. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220603210758.148493-4-u.kleine-koenig@pengutronix.de
2022-05-17mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()Yang Yingliang1-0/+2
Clock source is prepared and enabled by clk_prepare_enable() in probe function, but not disabled or unprepared in remove function. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220516092911.953066-1-yangyingliang@huawei.com
2022-05-16mtd: phram: Allow cached mappingsVincent Whitchurch1-6/+37
Currently phram always uses ioremap(), but this is unnecessary when normal memory is used. If the reserved-memory node does not specify the no-map property, indicating it should be mapped as system RAM and ioremap() cannot be used on it, use a cached mapping using memremap(MEMREMAP_WB) instead. On one of my systems this improves read performance by ~70%. (Note that this driver has always used normal memcpy/memset functions on memory obtained from ioremap(), which sparse doesn't like. There is no memremap() variant which maps exactly to ioremap() on all architectures, so that behaviour of the driver is not changed to avoid affecting existing users, but the sparse warnings are suppressed in the moved code with __force.) Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220510151822.1809278-1-vincent.whitchurch@axis.com
2022-04-25mtd: phram: Allow probing via reserved-memoryVincent Whitchurch1-4/+63
Allow phram to be probed from the devicetree. It expects to be in a reserved-memory node as documented by the bindings. This allows things like partitioning to be specified via the devicetree. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220412135302.1682890-4-vincent.whitchurch@axis.com
2022-03-25Merge tag 'mtd/changes-for-5.18' of ↵Linus Torvalds3-3/+27
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "There has been a lot of activity in the MTD subsystem recently, with a number of SPI-NOR cleanups as well as the introduction of ECC engines that can be used by SPI controllers (hence a few SPI patches in here). Core MTD changes: - Replace the expert mode symbols with a single helper - Fix misuses of of_match_ptr() - Remove partid and partname debugfs files - tests: Fix eraseblock read speed miscalculation for lower partition sizes - TRX parser: Allow to use on MediaTek MIPS SoCs MTD driver changes: - spear_smi: use GFP_KERNEL - mchp48l640: Add SPI ID table - mchp23k256: Add SPI ID table - blkdevs: Avoid soft lockups with some mtd/spi devices - aspeed-smc: Improve probe resilience Hyperbus changes: - HBMC_AM654 should depend on ARCH_K3 NAND core changes: - ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: - Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode - Make two read-only arrays static const - Fix compile test issue Raw NAND core changes: - Fix misuses of of_match_node() - Rework of_get_nand_bus_width() - Remove of_get_nand_on_flash_bbt() wrapper - Protect access to rawnand devices while in suspend - bindings: Document the wp-gpios property Rax NAND controller driver changes: - atmel: Fix refcount issue in atmel_nand_controller_init - nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc - rockchip: Fix platform_get_irq.cocci warning - stm32_fmc2: Add NAND Write Protect support - pl353: Set the nand chip node as the flash node - brcmnand: Fix sparse warnings in bcma_nand - omap_elm: Remove redundant variable 'errors' - gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting - brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: - Check for error irq SPI-NAND core changes: - Delay a little bit the dirmap creation - Create direct mapping descriptors for ECC operations SPI-NAND driver changes: - macronix: Use random program load SPI NOR core changes: - Move vendor specific code out of the core into vendor drivers. - Unify all function and object names in the vendor modules. - Make setup() callback optional to improve readability. - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. SPI changes: - Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations - spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure Binding changes: - Dropped mtd/cortina,gemini-flash.txt - Convert BCM47xx partitions to json-schema - Vendor prefixes: Clarify Macronix prefix - SPI NAND: Convert spi-nand description file to yaml - Raw NAND chip: Create a NAND chip description - Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description - Describe Macronix NAND ECC engine - Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory" * tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits) mtd: nand: ecc: mxic: Fix compile test issue mtd: nand: mxic-ecc: make two read-only arrays static const mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3 mtd: core: Remove partid and partname debugfs files dt-bindings: mtd: partitions: convert BCM47xx to the json-schema mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init mtd: rawnand: rockchip: fix platform_get_irq.cocci warning mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set mtd: spi-nor: renumber flags mtd: spi-nor: slightly change code style in spi_nor_sr_ready() mtd: spi-nor: spansion: rename vendor specific functions and defines mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag mtd: spi-nor: move all spansion specifics into spansion.c mtd: spi-nor: spansion: slightly rework control flow in late_init() mtd: spi-nor: micron-st: rename vendor specific functions and defines mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag mtd: spi-nor: move all micron-st specifics into micron-st.c mtd: spi-nor: xilinx: correct the debug message mtd: spi-nor: xilinx: rename vendor specific functions and defines ...
2022-03-21Merge tag 'spi-v5.18' of ↵Linus Torvalds4-12/+4
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-18Merge tag 'spi-nor/for-5.18' into mtd/nextMiquel Raynal1-4/+8
SPI NOR core changes: - move vendor specific code out of the core into vendor drivers. - unify all function and object names in the vendor modules. - make setup() callback optional to improve readability. - skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-02-18mtd: spear_smi: use GFP_KERNELJulia Lawall1-1/+1
Platform_driver probe functions aren't called with locks held and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead. Problem found with Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220210204223.104181-8-Julia.Lawall@inria.fr
2022-02-09spi: make remove callback a void functionUwe Kleine-König4-12/+4
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-07mtd: mchp48l640: Add SPI ID tableMark Brown1-0/+10
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220202143404.16070-4-broonie@kernel.org
2022-02-07mtd: mchp23k256: Add SPI ID tableMark Brown1-0/+14
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220202143404.16070-3-broonie@kernel.org
2022-01-31mtd: Fix misuses of of_match_ptr()Miquel Raynal2-2/+2
of_match_ptr() either expands to NULL if !CONFIG_OF, or is transparent otherwise. There are several drivers using this macro which keep their of_device_id array enclosed within an #ifdef CONFIG_OF check, these are considered fine. However, When misused, the of_device_id array pointed by this macro will produce a warning because it is finally unused when compiled without OF support. A number of fixes are possible: - Always depend on CONFIG_OF, but this will not always work and may break boards. - Enclose the compatible array by #ifdef's, this may save a bit of memory but will reduce build coverage. - Tell the compiler the array may be unused, if this can be avoided, let's not do this. - Just drop the macro, setting the of_device_id array for a non OF enabled platform is not an issue, it will just be unused. The latter solution seems the more appropriate, so let's use it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/linux-mtd/20220127110631.1064705-1-miquel.raynal@bootlin.com
2022-01-25mtd: phram: Prevent divide by zero bug in phram_setup()Dan Carpenter1-4/+8
The problem is that "erasesize" is a uint64_t type so it might be non-zero but the lower 32 bits are zero so when it's truncated, "(uint32_t)erasesize", then that value is zero. This leads to a divide by zero bug. Avoid the bug by delaying the divide until after we have validated that "erasesize" is non-zero and within the uint32_t range. Fixes: dc2b3e5cbc80 ("mtd: phram: use div_u64_rem to stop overwrite len in phram_setup") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220121115505.GI1978@kadam
2022-01-11Merge tag 'mtd/for-5.17' of ↵Linus Torvalds4-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core changes: - mtdchar: Prevent unbounded allocation in MEMWRITE ioctl - gen_probe: Use bitmap_zalloc() when applicable - Introduce an expert mode for forensics and debugging purposes - Clear out unregistered devices a bit more - Provide unique name for nvmem device - Remove unused header file <linux/mtd/latch-addr-flash.h> - Fixed breaking list in __mtd_del_partition. MTD device changes: - Warn about failure to unregister mtd device in sst25l, mchp48l640, mchp23k256, and dataflash drivers. Raw NAND core changes: - Export nand_read_page_hwecc_oob_first() GPMC memory controller for OMAP2 NAND controller changes: - Add support for AM64 SoC and allow build on K3 platforms - Use a compatible match table when checking for NAND controller - Use platform_get_irq() to get the interrupt Raw NAND controller changes: - OMAP2 NAND controller: - Document the missing 'rb-gpios' DT property - Drop unused variable - Fix force_8bit flag behaviour for DMA mode - Move to exec_op interface - Use platform_get_irq() to get the interrupt - Renesas: - Add new NAND controller driver with its bindings and MAINTAINERS entry - Onenand: - Remove redundant variable ooblen - MPC5121: - Remove unused variable in ads5121_select_chip() - GPMI: - Add ERR007117 protection for nfc_apply_timings - Remove explicit default gpmi clock setting for i.MX6 - Use platform_get_irq_byname() to get the interrupt - Remove unneeded variable - Ingenic: - JZ4740 needs 'oob_first' read page function - Davinci: - Rewrite function description - Avoid duplicated page read - Don't calculate ECC when reading page SPI NOR core changes: - Add Pratyush as SPI NOR co-maintainer. - Flash parameters initialization was done in a spaghetti way. Clean flash parameters initialization. - Rework the flash_info flags and clarify where one should be used. - Initialize all flash parameters based on JESD216 SFDP where possible. Flash parameters and settings that are SFDP discoverable should not be duplicated via flash_info flags at flash declaration. - Remove debugfs entries that duplicate sysfs entries. SPI NOR manufacturer driver changes: - Use late_init() hook in various drivers to make it clear that those flash parameters are either not declared in the JESD216 SFDP standard, or the SFDP tables which define those flash parameters are not defined by the flash. - Fix mtd size for s3an flashes. - Write 2 bytes when disabling Octal DTR mode: 1 byte long transactions are not allowed in 8D-8D-8D mode. Hyperbus changes: - Couple of fixes in Renesas hyperbus rpc-if driver to avoid crash on module remove and for missing check for error value in probe" * tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (71 commits) mtd: spi-nor: Remove debugfs entries that duplicate sysfs entries mtd: spi-nor: micron-st: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: spansion: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: core: use 2 data bytes for template ops mtd: spi-nor: Constify part specific fixup hooks mtd: spi-nor: core: Remove reference to spi-nor.c mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3 memory: omap-gpmc: Use a compatible match table when checking for NAND controller memory: omap-gpmc: Add support for GPMC on AM64 SoC dt-bindings: memory-controllers: ti,gpmc: Add compatible for AM64 memory: omap-gpmc: Use platform_get_irq() to get the interrupt MAINTAINERS: Add an entry for Renesas NAND controller mtd: rawnand: renesas: Add new NAND controller driver dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller mtd: rawnand: gpmi: remove unneeded variable mtd: rawnand: omap2: drop unused variable mtd: rawnand: omap2: fix force_8bit flag behaviour for DMA mode mtd: rawnand: omap2: Add compatible for AM64 SoC ...
2021-12-03mtd: dataflash: Add device-tree SPI IDsJon Hunter1-0/+8
Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") added a test to check that every SPI driver has a spi_device_id for each DT compatiable string defined by the driver and warns if the spi_device_id is missing. The spi_device_ids are missing for the dataflash driver and the following warnings are now seen. WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,at45 WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,dataflash Fix this by adding the necessary spi_device_ids. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211130112443.107730-1-jonathanh@nvidia.com
2021-12-03mtd: sst25l: Warn about failure to unregister mtd deviceUwe Kleine-König1-1/+3
mtd_device_unregister() shouldn't fail. Wail loudly if it does anyhow. This matches how other drivers (e.g. nand/raw/nandsim.c) use mtd_device_unregister(). By returning 0 in the spi remove callback a generic error message by the spi framework (and nothing else) is suppressed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211108093153.63792-4-u.kleine-koenig@pengutronix.de
2021-12-03mtd: mchp48l640: Warn about failure to unregister mtd deviceUwe Kleine-König1-1/+3
mtd_device_unregister() shouldn't fail. Wail loudly if it does anyhow. This matches how other drivers (e.g. nand/raw/nandsim.c) use mtd_device_unregister(). By returning 0 in the spi remove callback a generic error message by the spi framework (and nothing else) is suppressed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211108093153.63792-3-u.kleine-koenig@pengutronix.de
2021-12-03mtd: mchp23k256: Warn about failure to unregister mtd deviceUwe Kleine-König1-1/+3
mtd_device_unregister() shouldn't fail. Wail loudly if it does anyhow. This matches how other drivers (e.g. nand/raw/nandsim.c) use mtd_device_unregister(). By returning 0 in the spi remove callback a generic error message by the spi framework (and nothing else) is suppressed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211108093153.63792-2-u.kleine-koenig@pengutronix.de
2021-12-03mtd: dataflash: Warn about failure to unregister mtd deviceUwe Kleine-König1-5/+5
mtd_device_unregister() shouldn't fail. Wail loudly if it does anyhow. This matches how other drivers (e.g. nand/raw/nandsim.c) use mtd_device_unregister(). By returning 0 in the spi remove callback a generic error message by the spi framework (and nothing else) is suppressed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211108093153.63792-1-u.kleine-koenig@pengutronix.de
2021-10-15mtd: block2mtd: add support for an optional custom MTD labelJoachim Wiberg1-7/+17
This patch adds support for an optional MTD label for mtd2block emulated MTD devices. Useful when, e.g., testing device images using Qemu. The following line in /etc/fstab can then be used to mount a file system regardless if running on an embedded system, or emulated with block2mtd: mtd:Config /mnt jffs2 noatime,nodiratime 0 0 Kernel command line syntax in the emulated case: block2mtd.block2mtd=/dev/sda,,Config Notice the ',,' it is the optional erase_size, which like before this patch, defaults to PAGE_SIZE when omitted. Hence the strlen() check. Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211009060955.552636-3-troglobit@gmail.com
2021-10-15mtd: block2mtd: minor refactor to avoid hard coded constantJoachim Wiberg1-2/+5
Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211009060955.552636-2-troglobit@gmail.com
2021-08-06mtd: devices: mchp48l640: Fix memory leak on cmdColin Ian King1-0/+1
The allocation for cmd is not being kfree'd on the return leading to a memory leak. Fix this by kfree'ing it. Addresses-Coverity: ("Resource leak") Fixes: 88d125026753 ("mtd: devices: add support for microchip 48l640 EERAM") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210712145214.101377-1-colin.king@canonical.com
2021-07-16mtd: mchp48l640: silence some uninitialized variable warningsDan Carpenter1-2/+2
Smatch complains that zero length read/writes will lead to an uninitalized return value. I don't know if that's possible, but it's nicer to return a zero literal anyway so let's do that. Fixes: 88d125026753 ("mtd: devices: add support for microchip 48l640 EERAM") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/YMyir961W28TX5dT@mwanda
2021-06-11mtd: devices: add support for microchip 48l640 EERAMHeiko Schocher3-0/+380
The Microchip 48l640 is a 8KByte EERAM connected via SPI. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Fabio Estevam <festevam@denx.de> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210607033909.1424605-3-hs@denx.de
2021-05-26mtd: devices: Remove superfluous "break"Ding Senjie1-1/+0
Remove superfluous "break", as there is a "return" before it. Signed-off-by: Ding Senjie <dingsenjie@yulong.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210514124451.20352-1-dingsenjie@163.com
2021-05-10mtd: phram: Fix error return code in phram_setup()Yu Kuai1-0/+1
Return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210408133812.1209798-1-yukuai3@huawei.com
2021-04-16mtd: core: Constify buf in mtd_write_user_prot_reg()Tudor Ambarus1-1/+1
The write buffer comes from user and should be const. Constify write buffer in mtd core and across all _write_user_prot_reg() users. cfi_cmdset_{0001, 0002} and onenand_base will pay the cost of an explicit cast to discard the const qualifier since the beginning, since they are using an otp_op_t function prototype that is used for both reads and writes. mtd_dataflash and SPI NOR will benefit of the const buffer because they are using different paths for writes and reads. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210403060931.7119-1-tudor.ambarus@microchip.com
2021-02-01mtd: st_spi_fsm: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210108092325.19037-1-zhengyongjun3@huawei.com
2021-01-27mtd: phram: use div_u64_rem to stop overwrite len in phram_setupyangerkun1-1/+5
We now support user to set erase page size, and use do_div between len and erase size to determine the reasonableness for the erase size. However, do_div is a macro and will overwrite the value of len. Which results a mtd device with unexcepted size. Fix it by use div_u64_rem. Fixes: ffad560394de ("mtd: phram: Allow the user to set the erase page size.") Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210125124936.651812-1-yangerkun@huawei.com
2020-12-07mtd: phram: Allow the user to set the erase page size.Patrick O'Grady1-18/+34
Permit the user to specify the erase page size as a parameter. This solves two problems: - phram can access images made by mkfs.jffs2. mkfs.jffs2 won't create images with erase sizes less than 8KiB; many architectures define PAGE_SIZE as 4KiB. - Allows more effective use of small capacity devices. JFFS2 needs somewhere between 2 and 5 empty pages for garbage collection; and for an NVRAM part with only 32KiB of space, a smaller erase page allows much better utilization in applications where garbage collection is important. Signed-off-by: Patrick O'Grady <patrick@baymotion.com> Reviewed-by: Joern Engel <joern@logfs.org> Link: https://lore.kernel.org/lkml/CAJ7m5OqYv_=JB9NhHsqBsa8YU0DFRoP7C+W10PY22wonAGJK=A@mail.gmail.com/ [Guohua Zhong: fix token array index out of bounds and update patch for kernel master branch] Signed-off-by: Guohua Zhong <zhongguohua1@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201207095529.20896-1-zhongguohua1@huawei.com
2020-11-20mtd: devices: powernv_flash: Add function names to headers and fix 'dev'Lee Jones1-1/+4
Fixes the following W=1 kernel build warning(s): drivers/mtd/devices/powernv_flash.c:129: warning: Cannot understand * @mtd: the device drivers/mtd/devices/powernv_flash.c:145: warning: Cannot understand * @mtd: the device drivers/mtd/devices/powernv_flash.c:161: warning: Cannot understand * @mtd: the device drivers/mtd/devices/powernv_flash.c:184: warning: Function parameter or member 'dev' not described in 'powernv_flash_set_driver_info' Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-mtd@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-24-lee.jones@linaro.org
2020-11-20mtd: devices: docg3: Fix kernel-doc 'bad line' and 'excessive doc' issuesLee Jones1-3/+2
This patch also places the descriptions in the correct order. Fixes the following W=1 kernel build warning(s): drivers/mtd/devices/docg3.c:819: warning: bad line: drivers/mtd/devices/docg3.c:1799: warning: Excess function parameter 'base' description in 'doc_probe_device' Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-5-lee.jones@linaro.org
2020-11-20mtd: devices: phram: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mtd/devices/phram.c:19: warning: Function parameter or member 'fmt' not described in 'pr_fmt' Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: "Jochen Schäuble" <psionic@psionic.de> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-3-lee.jones@linaro.org
2020-10-02mtd: spear_smi: Enable compile testingMiquel Raynal1-1/+1
This driver does not contain any architecture specific code, enable compile testing it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200928155715.14370-1-miquel.raynal@bootlin.com
2020-09-15mtd: spear_smi: use for_each_child_of_node() macroQinglang Miao1-2/+2
Use for_each_child_of_node() macro instead of open coding it. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200914061324.3230-1-miaoqinglang@huawei.com
2020-08-27mtd: Avoid comma separated statementsJoe Perches1-2/+8
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/ae92f4c0507c470d9461886410dc7030192f9014.1598331149.git.joe@perches.com
2020-05-24lib/bch: Allow easy bit swappingMiquel Raynal1-1/+1
It seems that several hardware ECC engine use a swapped representation of bytes compared to software. This might having to do with how the ECC engine is wired to the NAND controller or the order the bits are passed to the hardware BCH logic. This means that when the software BCH engine is working in conjunction with data generated with hardware, sometimes we might need to swap the bits inside bytes, eg: 0x0A = b0000_1010 -> b0101_0000 = 0x50 Make it possible by adding a boolean to the BCH initialization routine. Regarding the implementation itself, this is a rather simple approach that can probably be enhanced in the future by preparing the ->a_{mod,pow}_tab tables with the swapping in mind. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-3-miquel.raynal@bootlin.com
2020-05-24lib/bch: Rework a little bit the exported function namesMiquel Raynal1-5/+5
There are four exported functions, all suffixed by _bch, which is clearly not the norm. Let's rename them by prefixing them with bch_ instead. This is a mechanical change: init_bch -> bch_init free_bch -> bch_free encode_bch -> bch_encode decode_bch -> bch_decode Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-2-miquel.raynal@bootlin.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 23:41:00 +0000