summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/devices
AgeCommit message (Collapse)AuthorFilesLines
2014-12-17Merge tag 'for-linus-20141215' of git://git.infradead.org/linux-mtdLinus Torvalds5-89/+74
Pull MTD updates from Brian Norris: "Summary: - Add device tree support for DoC3 - SPI NOR: Refactoring, for better layering between spi-nor.c and its driver users (e.g., m25p80.c) New flash device support Support 6-byte ID strings - NAND: New NAND driver for Allwinner SoC's (sunxi) GPMI NAND: add support for raw (no ECC) access, for testing purposes Add ATO manufacturer ID A few odd driver fixes - MTD tests: Allow testers to compensate for OOB bitflips in oobtest Fix a torturetest regression - nandsim: Support longer ID byte strings And more" * tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits) mtd: tests: abort torturetest on erase errors mtd: physmap_of: fix potential NULL dereference mtd: spi-nor: allow NULL as chip name and try to auto detect it mtd: nand: gpmi: add raw oob access functions mtd: nand: gpmi: add proper raw access support mtd: nand: gpmi: add gpmi_copy_bits function mtd: spi-nor: factor out write_enable() for erase commands mtd: spi-nor: add support for s25fl128s mtd: spi-nor: remove the jedec_id/ext_id mtd: spi-nor: add id/id_len for flash_info{} mtd: nand: correct the comment of function nand_block_isreserved() jffs2: Drop bogus if in comment mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy mtd: cafe_nand: drop duplicate .write_page implementation mtd: m25p80: Add support for serial flash Spansion S25FL132K MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids mtd: spi-nor: improve wait-till-ready timeout loop mtd: delete unnecessary checks before two function calls mtd: nand: omap: Fix NAND enumeration on 3430 LDP mtd: nand: add ATO manufacturer info ...
2014-12-01mtd: spi-nor: factor out write_enable() for erase commandsBrian Norris1-6/+0
write_enable() was being duplicated to both m25p80.c and fsl-quadspi.c. But this should be handled within the spi-nor abstraction layer. At the same time, let's add write_disable() after erasing, so we don't leave the flash in a write-enabled state afterward. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <shijie.huang@intel.com>
2014-11-25mtd: m25p80: Add support for serial flash Spansion S25FL132KKnut Wohlrab1-3/+1
Signed-off-by: Knut Wohlrab <knut.wohlrab@de.bosch.com> Signed-off-by: Alison Chaiken <alison_chaiken@mentor.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_idsAlison Chaiken1-3/+3
As stated in a5b7616c5, "mtd: m25p80,spi-nor: Fix module aliases for m25p80", m25p_ids[] in m25p80.c needs to be kept in sync with spi_nor_ids[] in spi-nor.c. The change here corrects a misalignment. (We were missing m25px80 and we had a duplicate w25q128.) Signed-off-by: Alison Chaiken <alison_chaiken@mentor.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: <stable@vger.kernel.org> # 3.18+
2014-11-25mtd: delete unnecessary checks before two function callsMarkus Elfring1-2/+1
The functions kfree() and pci_dev_put() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: dataflash: Remove use of tx_dmaMark Brown1-3/+3
We are trying to remove the legacy tx_dma and rx_dma fields from the spi_transfer structure. Currently dataflash uses tx_dma but only to make sure that it's set to 0 so we can remove this use by replacing with a zero initialisation of the entire spi_transfer struct. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: m25p80: drop wait-till-ready checksBrian Norris1-11/+0
spi-nor.c should be taking care of these now. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05mtd: spi-nor: fix the wrong dummy valueHuang Shijie1-1/+4
For the DDR Quad read, the dummy cycles maybe 3 or 6 which is less then 8. The dummy cycles is actually 8 for SPI fast/dual/quad read. This patch makes preparations for the DDR quad read, it fixes the wrong dummy value for both the spi-nor.c and m25p80.c. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman4-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-22mtd: docg3: fix 'defined but not used' warningBrian Norris1-0/+2
With CONFIG_OF=n, we can see the following warning: drivers/mtd/devices/docg3.c:2122:28: warning: 'docg3_dt_ids' defined but not used [-Wunused-variable] static struct of_device_id docg3_dt_ids[] = { Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr>
2014-10-22mtd: phram: fix asm/io.h include usageRob Ward1-1/+1
Modify phram to include <linux/io.h> rather than <asm/io.h> Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: docg3: add device-tree supportRobert Jarzmik1-0/+8
Add device-tree support. This is straightforward as docg3 only uses the standard IOMEM resources. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-21docg3: Fix miuse of seq_printf return valueJoe Perches1-60/+52
seq_printf doesn't return a useful value, so remove these misuses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-21mtd: m25p80,spi-nor: Fix module aliases for m25p80Ben Hutchings1-1/+51
m25p80's device ID table is now spi_nor_ids, defined in spi-nor. The MODULE_DEVICE_TABLE() macro doesn't work with extern definitions, but its use was also removed at the same time. Now if m25p80 is built as a module it doesn't get the necessary aliases to be loaded automatically. A clean solution to this will involve defining the list of device IDs in spi-nor.h and removing struct spi_device_id from the spi-nor API, but this is quite a large change. As a quick fix suitable for stable, copy the device IDs back into m25p80. Fixes: 03e296f613af ("mtd: m25p80: use the SPI nor framework") Cc: <stable@vger.kernel.org> # 3.16.x: 32f1b7c8352f: mtd: move support for struct flash_platform_data into m25p80 Cc: <stable@vger.kernel.org> # 3.16.x: 90e55b3812a1: mtd: m25p80: get rid of spi_get_device_id Cc: <stable@vger.kernel.org> # 3.16.x: 70f3ce0510af: mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id Cc: <stable@vger.kernel.org> # 3.16.x Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-20mtd: devices: drop owner assignment from platform_driversWolfram Sang4-4/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-17mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_idBen Hutchings1-3/+1
Drivers currently call spi_nor_match_id() and then spi_nor_scan(). This adds a dependency on struct spi_device_id which we want to avoid. Make spi_nor_scan() do it for them. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-17mtd: m25p80: get rid of spi_get_device_idRafał Miłecki1-5/+5
This simplifies the way we use spi_nor framework and will allow us to drop spi_nor_match_id. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-28mtd: move support for struct flash_platform_data into m25p80Rafał Miłecki1-2/+20
This "type" seems to be an extra hint for m25p80 about the flash. Some archs register flash_platform_data with "name" set to "m25p80" and then with a real flash name set in "type". It seems to be a trick specific to the m25p80 so let's move it out of spi-nor. Btw switch to the spi_nor_match_id instead of iterating spi_nor_ids. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: nand: Move ELM driver and rename as omap_elmEzequiel García2-580/+0
The ELM driver is only used by the OMAP NAND driver, so let's move it to the nand/ directory. Additionally, let's rename it to a less confusing name, so the module is built with a meaningful name, instead of the previous 'elm.ko'. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: Fixed checkpatch seq_printf warningsSamarth Parikh1-13/+13
Fixed checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" This patch is created with reference to the ongoing lkml thread https://lkml.org/lkml/2014/7/15/646 where Andrew Morton wrote: " - puts is presumably faster - puts doesn't go rogue if you accidentally pass it a "%". - this patch would actually make compiled object files few bytes smaller. Perhaps because seq_printf() is a varargs function, forcing the caller to pass args on the stack instead of in registers. " Signed-off-by: Samarth Parikh <samarthp@ymail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21Merge tag 'v3.16-rc6' into MTD development branchBrian Norris1-0/+2
Linux 3.16-rc6
2014-07-14mtd: phram: Fix whitespace issuesRob Ward1-1/+2
Fix various whitespace issues. No functional changes. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-05mtd: devices: elm: fix elm_context_save() and elm_context_restore() functionsTed Juan1-0/+2
These two function's switch case lack the 'break' that make them always return error. Signed-off-by: Ted Juan <ted.juan@gmail.com> Acked-by: Pekon Gupta <pekon@ti.com> Cc: <stable@vger.kernel.org> # 3.12.x+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-05mtd: phram: replace kmalloc/strcpy by kstrdupFabian Frederick1-3/+1
Cc: Joern Engel <joern@lazybastard.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-06-11Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Most of this is cleaning up various driver sysfs permissions so we can re-add the perm check (we unified the module param and sysfs checks, but the module ones were stronger so we weakened them temporarily). Param parsing gets documented, and also "--" now forces args to be handed to init (and ignored by the kernel). Module NX/RO protections get tightened: we now set them before calling parse_args()" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: set nx before marking module MODULE_STATE_COMING. samples/kobject/: avoid world-writable sysfs files. drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files. drivers/staging/speakup/: avoid world-writable sysfs files. drivers/regulator/virtual: avoid world-writable sysfs files. drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files. drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files. drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files. drivers/mtd/devices/docg3.c: avoid world-writable sysfs files. speakup: fix incorrect perms on speakup_acntsa.c cpumask.h: silence warning with -Wsign-compare Documentation: Update kernel-parameters.tx param: hand arguments after -- straight to init modpost: Fix resource leak in read_dump()
2014-06-11Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtdLinus Torvalds6-1419/+316
Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ...
2014-05-28mtd: slram: fix unused variable warningBrian Norris1-3/+1
drivers/mtd/devices/slram.c: In function 'init_slram': drivers/mtd/devices/slram.c:283:6: warning: variable 'i' set but not used [-Wunused-but-set-variable] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-20mtd: nand: omap: add support for BCH16_ECC - ELM driver updatespekon gupta1-0/+36
ELM hardware engine is used to detect ECC errors for BCHx ecc-schemes (like BCH4/BCH8/BCH16). This patch extends configuration of ELM registers for adding support of BCH16_HW ecc-scheme. Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-20mtd: st_spi_fsm: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-14drivers/mtd/devices/docg3.c: avoid world-writable sysfs files.Rusty Russell1-2/+2
In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-05-12mtd: m25p80: Revive dual read supportGeert Uytterhoeven1-0/+2
Commit 03e296f613affcc2671c1e86d8c25ecad867204e ("mtd: m25p80: use the SPI nor framework") accidentally removed support for Dual SPI read transfers. Add it back. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-12mtd: elm: compile suspend/resume only with PM_SLEEPWolfram Sang1-0/+2
Fixes: drivers/mtd/devices/elm.c:480:12: warning: 'elm_suspend' defined but not used [-Wunused-function] drivers/mtd/devices/elm.c:488:12: warning: 'elm_resume' defined but not used [-Wunused-function] Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-18Shiraz has movedViresh Kumar1-2/+2
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-16mtd: st_spi_fsm: only build for ARMBrian Norris1-1/+1
COMPILE_TEST allows us to build this driver on other arch'es. But not all arch'es have the right I/O accessors -- particularly, x86 is missing readsl() and writesl(). So just restrict this driver to ARCH_STI. It's still buildable for a multiplatform ARM kernel, so it can get decent compile coverage. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-04-16mtd: st_spi_fsm: correct type issuesBrian Norris1-6/+6
Compile-testing for a 64-bit arch uncovers several bad casts: In file included from include/linux/linkage.h:4:0, from include/linux/kernel.h:6, from drivers/mtd/devices/st_spi_fsm.c:15: drivers/mtd/devices/st_spi_fsm.c: In function ‘stfsm_read_fifo’: drivers/mtd/devices/st_spi_fsm.c:758:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] BUG_ON((((uint32_t)buf) & 0x3) || (size & 0x3)); ... Use uintptr_t instead of uint32_t, since it's guaranteed to be pointer-sized. We also see this warning, if size_t is not 32 bits wide: In file included from drivers/mtd/devices/st_spi_fsm.c:15:0: drivers/mtd/devices/st_spi_fsm.c: In function ‘stfsm_mtd_write’: include/linux/kernel.h:712:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ ^ drivers/mtd/devices/st_spi_fsm.c:1704:11: note: in expansion of macro ‘min’ bytes = min(FLASH_PAGESIZE - page_offs, len); ^ Just use min_t() to force the type conversion, since we don't really want to upgrade 'page_offs' and 'bytes' to size_t; they only should be handling <= 256 byte offsets. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-04-14mtd: st_spi_fsm: begin using spi-nor.h opcodesBrian Norris2-24/+5
Many of the serial_flash_cmds.h opcodes are duplicated with spi-nor.h. Let's begin to unify them. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de>
2014-04-14mtd: st_spi_fsm: replace FLACH_CMD_* with SPINOR_OP_*Brian Norris2-87/+87
Begin to unify the differences between serial_flash_cmds.h and spi-nor.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de>
2014-04-14mtd: st_spi_fsm: kill duplicate CMD definitionsBrian Norris1-36/+0
These are also in serial_flash_cmds.h. (FWIW, I didn't know the C preprocessor allowed redefinitions without warning like this.) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de>
2014-04-14mtd: st_spi_fsm: fixup Kconfig dependencyBrian Norris1-1/+1
I hear that this driver should depend on ARCH_STI, and that "SH" is not actually a real symbol. At the same time, let's allow compile-testing on other ARCH'es. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de>
2014-04-14mtd: spi-nor: shorten Kconfig namingBrian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*Brian Norris1-2/+2
Qualify these with a better namespace, and prepare them for use in more drivers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: st_spi_fsm: Add support for Macronix MX25L3255EAngus Clark1-1/+7
This patch adds support for the Macronix MX25L3255E device. Unlike the other Macronix devices we have seen, this device supports WRITE_1_4_4 at reasonable frequencies. Rather than masking out WRITE_1_4_4 support altogether, we now rely on the table parameters to indicate whether or not WRITE_1_4_4 should be used. Signed-off-by: Angus Clark <angus.clark@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: st_spi_fsm: Add Spansion S25FL032P to device tableAngus Clark1-0/+2
Add Spansion S25FL032P to the list of known devices. Signed-off-by: Angus Clark <angus.clark@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: st_spi_fsm: Refactor status register operationsAngus Clark1-84/+68
This patch refactors the fsm_read_status() and fsm_write_status() code to support 1 or 2 byte operations, with a specified command. This allows us to remove device/register specific code, such as the N25Q fsm_wrvcr() function. The 'QE' configuration code is updated accordingly, with minor tweaks to ensure the register values are only written if actually required. One notable change in this area is that the 'W25Q_STATUS_QE' bit-field is now defined with respect to the 'SR2' register, rather than the combined 'SR1+SR2' register which is only used for write operations. Signed-off-by: Angus Clark <angus.clark@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: st_spi_fsm: Update Macronix 'QE' configurationAngus Clark1-4/+19
Update the configuration of the Macronix 'QE' bit, such that we only set or clear the bit if required. Signed-off-by: Angus Clark <angus.clark@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: st_spi_fsm: Update Macronix 32-bit addressing supportAngus Clark1-13/+10
Support for the Macronix 32-bit addressing scheme was originally developed using the MX25L25635E device. As is often the case, it was found that the presence of a "WAIT" instruction was required for the "EN4B/EX4B" FSM Sequence to complete. (It is known that the SPI FSM Controller makes certain undocumented assumptions regarding what constitutes a valid sequence.) However, further testing suggested that a small delay was required after issuing the "EX4B" command; without this delay, data corruptions were observed, consistent with the device not being ready to retrieve data. Although the issue was not fully understood, the workaround of adding a small delay was implemented, while awaiting clarification from Macronix. The same behaviour has now been found with a second Macronix device, the MX25L25655E. However, with this device, it seems that the delay is also required after the 'EN4B' commands. This discovery has prompted us to revisit the issue. Although still not conclusive, further tests have suggested that the issue is down to the SPI FSM Controller, rather than the Macronix devices. Furthermore, an alternative workaround has emerged which is to set the WAIT time to 0x00000001, rather then 0x00000000. (Note, the WAIT instruction is used purely for the purpose of achieving "sequence validity", rather than actually implementing a delay!) The issue is now being investigated by the Design and Validation teams. In the meantime, we implement the alternative workaround, which reduces the effective delay from 1us to 1ns. Signed-off-by: Angus Clark <angus.clark@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: st_spi_fsm: Add Macronix MX25L25655E deviceAngus Clark1-0/+3
Add Macronix MX25L25655E to the list of known devices. Signed-off-by: Angus Clark <angus.clark@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: m25p80: use the SPI nor frameworkBrian Norris2-1199/+106
Use the new SPI nor framework, and rewrite the m25p80: (0) remove all the NOR comands. (1) change the m25p->command to an array. (2) implement the necessary hooks, such as m25p80_read/m25p80_write. Tested with the m25p32. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> [Brian: rebased] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: devices: elm: update DRIVER_NAME as "omap-elm"Pekon Gupta1-1/+3
use "omap-elm" as DRIVER_NAME Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-25mtd: devices: elm: configure parallel channels based on ecc_stepsPekon Gupta1-3/+5
ELM hardware can process up to maximum of 8 hannels in parallel for ECC error detection. Currently the number of channels getting configured for processing is static determined by macro ERROR_VECTOR_MAX. However, the actual number of channels that need to be processed is the ECC step number. This patch just avoids configuring extra unused channels. Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 16:15:54 +0000