summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2021-07-09Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-blockLinus Torvalds3-38/+16
Pull more block updates from Jens Axboe: "A combination of changes that ended up depending on both the driver and core branch (and/or the IDE removal), and a few late arriving fixes. In detail: - Fix io ticks wrap-around issue (Chunguang) - nvme-tcp sock locking fix (Maurizio) - s390-dasd fixes (Kees, Christoph) - blk_execute_rq polling support (Keith) - blk-cgroup RCU iteration fix (Yu) - nbd backend ID addition (Prasanna) - Partition deletion fix (Yufen) - Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph) - Removal of now dead block request types due to IDE removal (Christoph) - Loop probing and control device cleanups (Christoph) - Device uevent fix (Christoph) - Misc cleanups/fixes (Tetsuo, Christoph)" * tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits) blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs block: fix the problem of io_ticks becoming smaller nvme-tcp: can't set sk_user_data without write_lock loop: remove unused variable in loop_set_status() block: remove the bdgrab in blk_drop_partitions block: grab a device refcount in disk_uevent s390/dasd: Avoid field over-reading memcpy() dasd: unexport dasd_set_target_state block: check disk exist before trying to add partition ubd: remove dead code in ubd_setup_common nvme: use return value from blk_execute_rq() block: return errors from blk_execute_rq() nvme: use blk_execute_rq() for passthrough commands block: support polling through blk_execute_rq block: remove REQ_OP_SCSI_{IN,OUT} block: mark blk_mq_init_queue_data static loop: rewrite loop_exit using idr_for_each_entry loop: split loop_lookup loop: don't allow deleting an unspecified loop device loop: move loop_ctl_mutex locking into loop_add ...
2021-07-05Merge tag 'tty-5.14-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-07-05Merge tag 'mmc-v5.14-2' of ↵Linus Torvalds4-5/+27
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson "MMC core: - Clear flags before allowing to retune MMC host: - sdhci: Clear unused bounce buffer at DMA mmap error path - sdhci: Fix warning message when accessing RPMB in HS400 mode - sdhci-of-arasan: Use clock-frequency property to update clk_xin - mtk-sd: Fixup compatible string for MT8195" * tag 'mmc-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode dt-bindings: mmc: change compatiable string for MT8195 mmc host IP mmc: sdhci: Clear unused bounce buffer at DMA mmap error path phy: intel: Fix for warnings due to EMMC clock 175Mhz change in FIP mmc: sdhci-of-arasan: Use clock-frequency property to update clk_xin mmc: core: clear flags before allowing to retune
2021-07-02Merge tag 'linux-kselftest-kunit-fixes-5.14-rc1' of ↵Linus Torvalds1-17/+17
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit update from Shuah Khan: "Fixes and features: - add support for skipped tests - introduce kunit_kmalloc_array/kunit_kcalloc() helpers - add gnu_printf specifiers - add kunit_shutdown - add unit test for filtering suites by names - convert lib/test_list_sort.c to use KUnit - code organization moving default config to tools/testing/kunit - refactor of internal parser input handling - cleanups and updates to documentation - code cleanup related to casts" * tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) kunit: add unit test for filtering suites by names kasan: test: make use of kunit_skip() kunit: test: Add example tests which are always skipped kunit: tool: Support skipped tests in kunit_tool kunit: Support skipped tests thunderbolt: test: Reinstate a few casts of bitfields kunit: tool: internal refactor of parser input handling lib/test: convert lib/test_list_sort.c to use KUnit kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers kunit: Remove the unused all_tests.config kunit: Move default config from arch/um -> tools/testing/kunit kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default kunit: Add gnu_printf specifiers lib/cmdline_kunit: Remove a cast which are no-longer required kernel/sysctl-test: Remove some casts which are no-longer required thunderbolt: test: Remove some casts which are no longer required mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests iio: Remove a cast in iio-test-format which is no longer required device property: Remove some casts in property-entry-test Documentation: kunit: Clean up some string casts in examples ...
2021-07-02mmc: sdhci: Fix warning message when accessing RPMB in HS400 modeAl Cooper2-0/+5
When an eMMC device is being run in HS400 mode, any access to the RPMB device will cause the error message "mmc1: Invalid UHS-I mode selected". This happens as a result of tuning being disabled before RPMB access and then re-enabled after the RPMB access is complete. When tuning is re-enabled, the system has to switch from HS400 to HS200 to do the tuning and then back to HS400. As part of sequence to switch from HS400 to HS200 the system is temporarily put into HS mode. When switching to HS mode, sdhci_get_preset_value() is called and does not have support for HS mode and prints the warning message and returns the preset for SDR12. The fix is to add support for MMC and SD HS modes to sdhci_get_preset_value(). This can be reproduced on any system running eMMC in HS400 mode (not HS400ES) by using the "mmc" utility to run the following command: "mmc rpmb read-counter /dev/mmcblk0rpmb". Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624163045.33651-1-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-07-01Merge tag 'clk-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round has a diffstat dominated by Qualcomm clk drivers. Honestly though that's just a bunch of data so the diffstat reflects that. Looking beyond that there's just a bunch of updates all around in various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall the driver changes look to be mostly enabling more clks and non-critical fixes that we could hold until the next merge window. I'm especially excited about the series from Arnd that graduates clkdev to be the only implementation of clk_get() and clk_put(). That's a good step in the right direction to migreate eveerything over to the common clk framework. Now we don't have to worry about clkdev specific details, they're just part of the clk API now. Core: - clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in only one place in the kernel instead of in drivers/clk/clkdev.c and in architectures that want their own implementation New Drivers: - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Qualcomm MDM9607 GCC - Qualcomm SC8180X display clks - Qualcomm SM6125 GCC - Qualcomm SM8250 CAMCC (camera) - Renesas RZ/G2L SoC - Hisilicon hi3559A SoC Updates: - Stop using clock-output-names in ST clk drivers (yay!) - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC - duty cycle setting support on qcom clks - Add TI am33xx spread spectrum clock support - Use determine_rate() for the Amlogic pll ops instead of round_rate() - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1 - Improve Amlogic axg-audio controller error on deferral - Add NNA clocks on Amlogic g12a - Reduce memory footprint of Rockchip PLL rate tables - A fix for the newly added Rockchip rk3568 clk driver - Exported clock for the newly added Rockchip video decoder - Remove audio ipg clock from i.MX8MP - Remove deprecated legacy clock binding for i.MX SCU clock driver - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio, parallel interface) - Add dedicated clock ops for i.MX paralel interface - Different fixes for clocks controlled by ATF on i.MX SoCs - Add A53/A72 frequency scaling support i.MX clk-scu driver - Add special case for DCSS clock on suspend for i.MX clk-scu driver - Add parent save/restore on suspend/resume to i.MX clk-scu driver - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their bindings - Tegra clk driver no longer deasserts resets on clk_enable as it gets in the way of certain power-up sequences - Fix compile testing for Tegra clk driver - One patch to fix a divider on the Allwinner v3s Audio PLL - Add support for CPU core clock boost modes on Renesas R-Car Gen3 - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and improve support for multiple parents - Switch Renesas RZ/N1 divider clocks to .determine_rate() - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3 - Convert ar7 to common clk framework - Convert ralink to common clk framework" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits) clk: zynqmp: Handle divider specific read only flag clk: zynqmp: Use firmware specific mux clock flags clk: zynqmp: Use firmware specific divider clock flags clk: zynqmp: Use firmware specific common clock flags clk: lmk04832: Use of match table clk: lmk04832: Depend on SPI clk: stm32mp1: new compatible for secure RCC support dt-bindings: clock: stm32mp1 new compatible for secure rcc dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 reset: stm32mp1: remove stm32mp1 reset clk: hisilicon: Add clock driver for hi3559A SoC dt-bindings: Document the hi3559a clock bindings clk: si5341: Add sysfs properties to allow checking/resetting device faults clk: si5341: Add silabs,iovdd-33 property clk: si5341: Add silabs,xaxb-ext-clk property clk: si5341: Allow different output VDD_SEL values clk: si5341: Update initialization magic clk: si5341: Check for input clock presence and PLL lock on startup ...
2021-06-30mmc: initialized disk->minorsChristoph Hellwig1-0/+1
Fix a let hunk from the blk_mq_alloc_disk conversion. Fixes: 281ea6a5bfdc ("mmc: switch to blk_mq_alloc_disk") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210621080144.3655131-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-30mmc: switch to blk_mq_alloc_diskChristoph Hellwig3-25/+14
Use the blk_mq_alloc_disk to allocate the request_queue and gendisk together. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210616053934.880951-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-30mmc: remove an extra blk_{get,put}_queue pairChristoph Hellwig1-13/+1
The gendisk already acquires a reference to the queue when add_disk is called, which dropped on put_disk. So remove the superflous extra refcounting. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210616053934.880951-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-29mmc: sdhci: Clear unused bounce buffer at DMA mmap error pathTakashi Iwai1-1/+5
When DMA-mapping of the bounce buffer fails, the driver tries to fall back, but it leaves the allocated host->bounce_buffer although its size is zero. Later on, the driver checks the use of bounce buffer with host->bounce_buffer pointer, and it tries to use the buffer incorrectly, resulting in Oops. This patch clears the release the unused buffer and clears the bounce_buffer pointer for addressing the problem. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210611101948.18972-1-tiwai@suse.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-29mmc: sdhci-of-arasan: Use clock-frequency property to update clk_xinRashmi A1-2/+12
If clock-frequency property is set and it is not the same as the current clock rate of clk_xin(base clock frequency), set clk_xin to use the provided clock rate. Signed-off-by: Rashmi A <rashmi.a@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/20210603182242.25733-2-rashmi.a@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-29mmc: core: clear flags before allowing to retuneWolfram Sang1-2/+5
It might be that something goes wrong during tuning so the MMC core will immediately trigger a retune. In our case it was: - we sent a tuning block - there was an error so we need to send an abort cmd to the eMMC - the abort cmd had a CRC error - retune was set by the MMC core This lead to a vicious circle causing a performance regression of 75%. So, clear retuning flags before we enable retuning to start with a known cleared state. Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624151616.38770-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-23mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit testsDavid Gow1-17/+17
With KUnit's EXPECT macros no longer typechecking arguments as strictly, get rid of a number of now unnecessary casts. Signed-off-by: David Gow <davidgow@google.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-06-15mmc: sdhci-iproc: Add support for the legacy sdhci controller on the BCM7211Al Cooper3-1/+33
Add support for the legacy Arasan sdhci controller on the BCM7211 and related SoC's. This includes adding a .shutdown callback to increase the power savings during S5. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20210602192758.38735-2-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-15Merge branch 'fixes' into nextUlf Hansson1-5/+45
2021-06-14mmc: meson-gx: use memcpy_to/fromio for dram-access-quirkNeil Armstrong1-5/+45
It has been reported that usage of memcpy() to/from an iomem mapping is invalid, and a recent arm64 memcpy update [1] triggers a memory abort when dram-access-quirk is used on the G12A/G12B platforms. This adds a local sg_copy_to_buffer which makes usage of io versions of memcpy when dram-access-quirk is enabled. [1] 285133040e6c ("arm64: Import latest memcpy()/memmove() implementation") Fixes: acdc8e71d9bb ("mmc: meson-gx: add dram-access-quirk") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210609150230.9291-1-narmstrong@baylibre.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: JZ4740: Add support for JZ4775周琰杰 (Zhou Yanjie)1-2/+3
Add support for the variant on the JZ4775 SoC from Ingenic. Let's also clarify that the drive clock selection and sample clock selection have been supported since JZ4775, not X1000. So, support for these two functions has been added for JZ4775 and JZ4780. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/1623329930-14387-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci-esdhc-imx: Enable support for system wakeup for SDIOHaibo Chen1-0/+8
Enable support for system wakeup, by setting the wakeup capability for the slot corresponding to the SDIO card. Users need to enable the wakeup through the sysfs interface. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1623326486-25275-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: Improve function name when aborting a tuning cmdWolfram Sang3-4/+4
'mmc_abort_tuning()' made me think tuning gets completely aborted. However, it sends only a STOP cmd to cancel the current tuning cmd. Tuning process may still continue after that. So, rename the function to 'mmc_send_abort_tuning()' to better reflect all this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210608180620.40059-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci-of-aspeed: Turn down a phase correction warningAndrew Jeffery1-1/+1
The card timing and the bus frequency are not changed atomically with respect to calls to the set_clock() callback in the driver. The result is the driver sees a transient state where there's a mismatch between the two and thus the inputs to the phase correction calculation formula are garbage. Switch from dev_warn() to dev_dbg() to avoid noise in the normal case, though the change does make bad configurations less likely to be noticed. Reported-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607013020.85885-1-andrew@aj.id.au Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: debugfs: add description for module parameterWolfram Sang1-0/+1
Make it obvious what this is for. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210604104459.7574-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: via-sdmmc: add a check against NULL pointer dereferenceZheyu Ma1-0/+3
Before referencing 'host->data', the driver needs to check whether it is null pointer, otherwise it will cause a null pointer reference. This log reveals it: [ 29.355199] BUG: kernel NULL pointer dereference, address: 0000000000000014 [ 29.357323] #PF: supervisor write access in kernel mode [ 29.357706] #PF: error_code(0x0002) - not-present page [ 29.358088] PGD 0 P4D 0 [ 29.358280] Oops: 0002 [#1] PREEMPT SMP PTI [ 29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4- g70e7f0549188-dirty #102 [ 29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.362042] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.363604] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.364651] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.365235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.366170] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.367197] Call Trace: [ 29.367381] <IRQ> [ 29.367537] __handle_irq_event_percpu+0x53/0x3e0 [ 29.367916] handle_irq_event_percpu+0x35/0x90 [ 29.368247] handle_irq_event+0x39/0x60 [ 29.368632] handle_fasteoi_irq+0xc2/0x1d0 [ 29.368950] __common_interrupt+0x7f/0x150 [ 29.369254] common_interrupt+0xb4/0xd0 [ 29.369547] </IRQ> [ 29.369708] asm_common_interrupt+0x1e/0x40 [ 29.370016] RIP: 0010:native_safe_halt+0x17/0x20 [ 29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91 [ 29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 29.372079] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4 RDI: ffffffff85403406 [ 29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 29.373646] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86009188 [ 29.374160] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100258000 [ 29.374690] default_idle+0x9/0x10 [ 29.374944] arch_cpu_idle+0xa/0x10 [ 29.375198] default_idle_call+0x6e/0x250 [ 29.375491] do_idle+0x1f0/0x2d0 [ 29.375740] cpu_startup_entry+0x18/0x20 [ 29.376034] start_secondary+0x11f/0x160 [ 29.376328] secondary_startup_64_no_verify+0xb0/0xbb [ 29.376705] Modules linked in: [ 29.376939] Dumping ftrace buffer: [ 29.377187] (ftrace buffer empty) [ 29.377460] CR2: 0000000000000014 [ 29.377712] ---[ end trace 51a473dffb618c47 ]--- [ 29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.380098] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.381653] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.382697] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.383277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.384223] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.385260] Kernel panic - not syncing: Fatal exception in interrupt [ 29.385882] Dumping ftrace buffer: [ 29.386135] (ftrace buffer empty) [ 29.386401] Kernel Offset: disabled [ 29.386656] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/1622727200-15808-1-git-send-email-zheyuma97@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci-sprd: use sdhci_sprd_writewKrzysztof Kozlowski1-0/+1
The sdhci_sprd_writew() was defined by never used in sdhci_ops: drivers/mmc/host/sdhci-sprd.c:134:20: warning: unused function 'sdhci_sprd_writew' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210601095403.236007-2-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci-esdhc-imx: remove unused is_imx6q_usdhcKrzysztof Kozlowski1-5/+0
The is_imx6q_usdhc() function is unused: drivers/mmc/host/sdhci-esdhc-imx.c:343:19: warning: unused function 'is_imx6q_usdhc' Reported-by: kernel test robot <lkp@intel.com> Fixes: f47c4bbfa283 ("mmc: sdhci-esdhc-imx: create struct esdhc_soc_data") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20210601095403.236007-1-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: core: Allow UHS-I voltage switch for SDSC cards if supportedChristian Löhle1-4/+6
While initializing an UHS-I SD card, the mmc core first tries to switch to 1.8V I/O voltage, before it continues to change the settings for the bus speed mode. However, the current behaviour in the mmc core is inconsistent and doesn't conform to the SD spec. More precisely, an SD card that supports UHS-I must set both the SD_OCR_CCS bit and the SD_OCR_S18R bit in the OCR register response. When switching to 1.8V I/O the mmc core correctly checks both of the bits, but only the SD_OCR_S18R bit when changing the settings for bus speed mode. Rather than actually fixing the code to confirm to the SD spec, let's deliberately deviate from it by requiring only the SD_OCR_S18R bit for both parts. This enables us to support UHS-I for SDSC cards (outside spec), which is actually being supported by some existing SDSC cards. Moreover, this fixes the inconsistent behaviour. Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Link: https://lore.kernel.org/r/CWXP265MB26803AE79E0AD5ED083BF2A6C4529@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM Cc: stable@vger.kernel.org [Ulf: Rewrote commit message and comments to clarify the changes] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: mmc_spi: Imply container_of() to be no-opAndy Shevchenko1-1/+1
Since we don't use structure field layout randomization the manual shuffling can affect some macros, in particular container_of() against struct of_mmc_spi, which becomes a no-op when pdata member is the first one in the structure. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210528112127.71738-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: mmc_spi: Drop duplicate 'mmc_spi' in the debug messagesAndy Shevchenko1-7/+5
dev_dbg() in any case prints the device and driver name, no need to repeat this in (some) messages. Drop duplicates for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210528112127.71738-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: dw_mmc-pltfm: Remove unused <linux/clk.h>Geert Uytterhoeven1-1/+0
As of commit 4cdc2ec1da322776 ("mmc: dw_mmc: move rockchip related code to a separate file"), dw_mmc-pltfm.c no longer uses the clock API. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20210527194226.1705607-1-geert@linux-m68k.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.Steven Lee1-0/+48
The hardware provides capability configuration registers for each SDHCI in the global configuration space for the SD controller. Writes to the global capability registers are mirrored to the capability registers in the associated SDHCI. Configuration of the capabilities must be written through the mirror registers prior to initialisation of the SDHCI. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210524073308.9328-5-steven_lee@aspeedtech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: core: Add a missing SPDX license headerAviral Gupta1-0/+1
Add the missing license header to drivers/mmc/core/block.c Signed-off-by: Aviral Gupta <shiv14112001@gmail.com> Link: https://lore.kernel.org/r/20210523155914.5200-1-shiv14112001@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: vub3000: fix control-request directionJohan Hovold1-1/+1
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the SET_ROM_WAIT_STATES request which erroneously used usb_rcvctrlpipe(). Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210521133026.17296-1-johan@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci-omap: Use pm_runtime_resume_and_get() to replace open codingTian Tao1-3/+2
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. this change is just to simplify the code, no actual functional changes. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1621558965-34077-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci_am654: Use pm_runtime_resume_and_get() to replace open codingTian Tao1-4/+2
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. this change is just to simplify the code, no actual functional changes. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1621558775-31185-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: core: Use pm_runtime_resume_and_get() to replace open codingTian Tao1-4/+2
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. this change is just to simplify the code, no actual functional changes Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1621513304-27824-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: cqhci: introduce get_trans_desc_offset()Yue Hu1-7/+12
The same calculation to get transfer descriptor offset is already used at 3 different locations. Let's create a new helper to simplify code. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20210521034432.2321-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: cqhci: fix typoYue Hu1-1/+1
'descritors' -> 'descriptors' Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20210520101330.2255-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: mediatek: remove useless data parameter from msdc_data_xfer_next()Yue Hu1-3/+2
We do not use the 'data' in msdc_data_xfer_next(). Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20210517105432.1682-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: mediatek: use data instead of mrq parameter from msdc_{un}prepare_data()Yue Hu1-12/+8
We already have 'mrq->data' before calling these two functions, no need to find it again via 'mrq->data' internally. Also remove local data variable accordingly. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20210517100900.1620-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: core: add support for disabling HS400 mode via DTLucas Stach1-0/+3
On some boards the data strobe line isn't wired up, rendering HS400 support broken, even if both the controller and the eMMC claim to support it. Allow to disable HS400 mode via DT. Signed-off-by: Lucas Stach <dev@lynxeye.de> Link: https://lore.kernel.org/r/20210510190400.105162-3-l.stach@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: sdhci-esdhc-imx: advertise HS400 mode through MMC capsLucas Stach1-4/+1
Instead of having an indirection through the SDHCI layer and emulating a capability bit, that isn't there in hardware, do the same same thing as with HS400_ES and advertise the support for HS400 directly through the MMC caps. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20210510190400.105162-2-l.stach@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: core: Add support for cache ctrl for SD cardsUlf Hansson3-0/+102
In SD spec v6.x the SD function extension registers for performance enhancements were introduced. As a part of this an optional internal cache on the SD card, can be used to improve performance. The let the SD card use the cache, the host needs to enable it and manage flushing of the cache, so let's add support for this. Note that for an SD card supporting the cache it's mandatory for it, to also support the poweroff notification feature. According to the SD spec, if the cache has been enabled and a poweroff notification is sent to the card, that implicitly also means that the card should flush its internal cache. Therefore, dealing with cache flushing for REQ_OP_FLUSH block requests is sufficient. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20210511101359.83521-1-ulf.hansson@linaro.org
2021-06-14mmc: sdhci-pci-gli: Fine tune GL9763E L1 entry delayBen Chuang1-2/+2
Fine tune the value to 21us in order to improve read/write performance. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Link: https://lore.kernel.org/r/20210511061835.5559-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: jz4740: Remove redundant error printing in jz4740_mmc_probe()Zhen Lei1-1/+0
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210511093329.4670-1-thunder.leizhen@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: usdhi6rol0: fix error return code in usdhi6_probe()Zhen Lei1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210508020321.1677-1-thunder.leizhen@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: core: Move eMMC cache flushing to a new bus_ops callbackUlf Hansson5-25/+33
To prepare to add internal cache management for SD cards, let's start by moving the eMMC specific code into a new ->flush_cache() bus_ops callback. In this way, it becomes straight forward to add the SD specific parts, as subsequent changes are about to show. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210506145829.198823-2-ulf.hansson@linaro.org
2021-06-14mmc: block: Disable CMDQ on the ioctl pathBean Huo1-0/+8
According to the eMMC Spec: "When command queuing is enabled (CMDQ Mode En bit in CMDQ_MODE_EN field is set to ‘1’) class 11 commands are the only method through which data transfer tasks can be issued. Existing data transfer commands, namely CMD18/CMD17 and CMD25/CMD24, are not supported when command queuing is enabled." which means if CMDQ is enabled, the FFU commands will not be supported. To fix this issue, just simply disable CMDQ on the ioctl path, and re-enable CMDQ once ioctl request is completed. Tested-by: Michael Brunner <Michael.Brunner@kontron.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 1e8e55b67030 (mmc: block: Add CQE support) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210504203209.361597-1-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: core: Add support for Power Off Notification for SD cardsUlf Hansson1-3/+133
Rather than only deselecting the SD card via a CMD7, before we cut power to it at system suspend, at runtime suspend or at shutdown, let's add support for a graceful power off sequence via enabling the SD Power Off Notification feature. Note that, the Power Off Notification feature was added in the SD spec v4.x, which is several years ago. However, it's still a bit unclear how often the SD card vendors decides to implement support for it. To validate these changes a Sandisk Extreme PRO A2 64GB has been used, which seems to work nicely. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210504161222.101536-12-ulf.hansson@linaro.org
2021-06-14mmc: core: Read performance enhancements registers for SD cardsUlf Hansson1-0/+53
In SD spec v6.x the SD function extension registers for performance enhancements were introduced. These registers let the SD card announce supports for various performance related features, like "self-maintenance", "cache" and "command queuing". Let's extend the parsing of SD function extension registers and store the information in the struct mmc_card. This prepares for subsequent changes to implement the complete support for new the performance enhancement features. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210504161222.101536-11-ulf.hansson@linaro.org
2021-06-14mmc: core: Read the SD function extension registers for power managementUlf Hansson1-0/+178
In the SD spec v4.0 the CMD48/49 and CMD58/59 were introduced as optional commands. In the SD spec v4.1 the SD function extension registers were introduced, which requires support for CMD48/49/58/59 to be read/written from/to. Moreover, a specific function extension register were added to let the card announce support for optional features in regards to power management. The features that were added are "Power Off Notification", "Power Down Mode" and "Power Sustenance". As a first step to support this, let's read and parse the register for power management during the SD card initialization and store the information about the supported features in the struct mmc_card. In this way, we prepare for subsequent changes to implement the complete support for the new features. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20210504161222.101536-10-ulf.hansson@linaro.org
2021-06-14mmc: core: Parse the SD SCR register for support of CMD48/49 and CMD58/59Ulf Hansson1-1/+3
In SD spec v4.x the support for CMD48/49 and CMD58/59 were introduced as optional features. To let the card announce whether it supports the commands, the SCR register has been extended with corresponding support bits. Let's parse and store this information for later use. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20210504161222.101536-9-ulf.hansson@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-29 13:40:20 +0000