summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<uapi/linux/sched/types.h> We are going to move scheduler ABI details to <uapi/linux/sched/types.h>, which will be used from a number of .c files. Create empty placeholder header that maps to <linux/types.h>. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27scripts/spelling.txt: add "intialization" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: intialization||initialization The "inintialization" in drivers/acpi/spcr.c is a different pattern but I fixed it as well in this commit. Link: http://lkml.kernel.org/r/1481573103-11329-16-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-21Merge tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds79-1090/+2416
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Marvell SD8787 Wifi/BT chip - Improve UHS support for SDIO - Invent MMC_CAP_3_3V_DDR and a DT binding for eMMC DDR 3.3V mode - Detect Auto BKOPS enable bit - Export eMMC device lifetime information through sysfs - First take to slim down the public mmc headers to avoid abuse - Re-factoring of the mmc block device driver to prepare for blkmq - Cleanup code for the mmc block device driver - Clarify and cleanup code dealing with data requests - Cleanup some code by converting to ida_simple_ functions - Cleanup code dealing with card quirks - Cleanup private and public mmc header files MMC host: - Don't rely on public mmc headers to include non-mmc related headers - meson: Add support for eMMC HS400 mode - meson: Various cleanups and improvements - omap_hsmmc: Use the proper provided busy timeout from the core - sunxi: Enable new timings for the A64 MMC controllers - sunxi: Improvements for clock management - tmio: Improvements for SDIO interrupts - mxs-mmc: Add CMD23 support - sdhci-msm: Enable HS400 enhanced strobe mode support - sdhci-msm: Correct HS400 tuning sequence - sdhci-acpi: Support deferred probe - sdhci-pci: Add support for eMMC HS200 tuning mode on AMD - mediatek: Correct the implementation of card busy detection - dw_mmc: Initial support for ZX mmc controller - sh_mobile_sdhi: Enable support for eMMC HS200 mode - sh_mmcif: Various cleanups and improvements" * tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits) mmc: core: add mmc prefix for blk_fixups mmc: core: move all quirks together into quirks.h mmc: core: improve the quirks for sdio devices mmc: core: move some sdio IDs out of quirks file mmc: core: change quirks.c to be a header file mmc: sdhci-cadence: fix bit shift of read data from PHY port mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support mmc: MAN_BKOPS_EN inverse debug message logic mmc: meson-gx: add support for HS400 mode mmc: meson-gx: remove unneeded checks in remove mmc: meson-gx: reduce bounce buffer size mmc: meson-gx: set max block count and request size mmc: meson-gx: improve interrupt handling mmc: meson-gx: improve meson_mmc_irq_thread mmc: meson-gx: improve meson_mmc_clk_set mmc: meson-gx: minor improvements in meson_mmc_set_ios mmc: meson: Assign the minimum clk rate as close to 400KHz as possible mmc: core: start to break apart mmc_start_areq() mmc: block: respect bool returned from blk_end_request() mmc: block: return errorcode from mmc_sd_num_wr_blocks() ...
2017-02-17Merge branch 'for-4.11/next' into for-4.11/linus-mergeJens Axboe1-9/+0
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-15mmc: core: add mmc prefix for blk_fixupsShawn Lin2-2/+2
That makes all the quirks table look more consistent. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: core: move all quirks together into quirks.hShawn Lin3-91/+91
It's not appreciated to place quirks everywhere, let's put them together just like what we do for USB, PCI etc. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: core: improve the quirks for sdio devicesShawn Lin2-6/+2
Rename mmc_fixup_methods to sdio_fixup_methods to better reflect that it's for sdio devices. So we could also pass on it from sdio card's probe sequence just like what we do for eMMC and block there. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: core: move some sdio IDs out of quirks fileShawn Lin1-20/+0
Consolidate all the sdio devices' IDs into sdio_ids. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: core: change quirks.c to be a header fileShawn Lin6-9/+6
Rename quirks.c to quirks.h, and include it for individual C files which need it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-15mmc: sdhci-cadence: fix bit shift of read data from PHY portMasahiro Yamada1-1/+1
This macro is currently unused, but it may be useful for debug use. Fix it just in case. Fixes: ff6af28faff5 ("mmc: sdhci-cadence: add Cadence SD4HC support") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14Merge branch 'fixes' into nextUlf Hansson1-2/+2
2017-02-14mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS supportUri Yanai1-0/+6
Adding dedicated flag for AUTO_BKOPS in card->ext_csd structure. Read AUTO_BKOPS bit value from the device EXT_CSD and set to the card->ext_csd structure. In mmc_decode_ext_csd() add a print message in case the AUTO_BKOPS is enabled Signed-off-by: Uri Yanai <uri.yanai@sandisk.com> Signed-off-by: Alex Lemberg <alex.lemberg@sandisk.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: MAN_BKOPS_EN inverse debug message logicUri Yanai1-2/+2
Inverse the logic for printing the debug message. In mmc_decode_ext_csd() print message when MAN_BKOPS_EN is set Signed-off-by: Uri Yanai <uri.yanai@sandisk.com> Signed-off-by: Alex Lemberg <alex.lemberg@sandisk.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: add support for HS400 modeHeiner Kallweit1-0/+11
Add support for HS400 mode. The driver still misses support for tuning, therefore highspeed modes like HS400 might not work under all circumstances yet. Successfully tested on a Odroid C2 (S905 GXBB). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: remove unneeded checks in removeHeiner Kallweit1-6/+2
The remove callback is called only if probe finished successfully. Therefore these checks are not needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: reduce bounce buffer sizeHeiner Kallweit1-1/+1
A bounce buffer of 512K isn't needed as the max request size is 511 * 512 byte. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: set max block count and request sizeHeiner Kallweit1-0/+3
So far max_blk_count isn't set what results in a default of value 8 to be used (PAGE_SIZE / block size). Block length field has 9 bits, so set max_blk_count to 2^9-1 = 511. In addition set max_req_size because max_blk_count is also limited by max_req_size / block_size. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve interrupt handlingHeiner Kallweit1-5/+4
Disabling and immediately re-enabling interrupts in meson_mmc_request doesn't provide a benefit. Instead enable interrupts in probe already. And disable interrupts in remove, this was missing so far. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve meson_mmc_irq_threadHeiner Kallweit1-9/+6
Remove unneeded variable ret and simplify the if block. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve meson_mmc_clk_setHeiner Kallweit1-18/+24
The following changes are quite small, therefore I combined them in one patch. - ret doesn't need to be initialized with 0 - use standard !clk_rate notation to check for a zero value - If clk_rate is zero we return here. Therefore all further checks in this function for clk_rate != 0 are not needed. - switch from dev_warn to dev_err if the clock can't be set - If due to clock source and available divider values the requested frequency isn't matched exactly (always the case if requested frequency is 52 MHz), then just print the differing values as debug message and not as warning. - Also remove ret from the message as it is always 0. - Set member current_clock to the current requested rate and mmc->actual_clock to the current actual rate Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: minor improvements in meson_mmc_set_iosHeiner Kallweit1-2/+0
val isn't used in the switch clause and afterwards there's an identical statement. So remove it. In case of an unexpected bus width the error message indicates the intention to set the bus width to 4 and to go on. So remove the return statement. This return statement also conflicts with "setting to 4" because nothing would be set actually before returning. 4bit bus width are chosen as default as the vendor driver does it too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson: Assign the minimum clk rate as close to 400KHz as possibleUlf Hansson1-14/+6
The current code dealing with calculating mmc->f_min is a bit complicated. Additionally, the attempt to set an initial clock rate should explicitly use a rate between 100KHz to 400 KHz, according the (e)MMC/SD specs, which it doesn't. Fix the problem and clean up the code by using clk_round_rate() to pick the nearest minimum rate to 400KHz (rounded down from 400kHz). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [Heiner: Changed from 100KHz to 400KHz to get a proper rounded rate] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-02-14mmc: core: start to break apart mmc_start_areq()Linus Walleij1-22/+43
This function is doing to many clever things at the same time under too many various conditions. Start to make things clearer by refactoring: break out the finalization of the previous asynchronous request to its own function mmc_finalize_areq(). We can get rid of the default assignment of status and let the call deal with this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: block: respect bool returned from blk_end_request()Linus Walleij1-25/+24
The return value from blk_end_request() is a bool but is treated like an int. This is generally safe, but the variable also has the opaque name "ret" and gets returned from the helper function mmc_blk_cmd_err(). - Switch the variable to a bool, applies everywhere. - Return a bool from mmc_blk_cmd_err() and rename the function mmc_blk_rw_cmd_err() to indicate through the namespace that this is a helper for mmc_blk_issue_rw_rq(). - Rename the variable from "ret" to "req_pending" inside the while() loop inside mmc_blk_issue_rq_rq(), which finally makes it very clear what this while loop is waiting for. - Augment the argument "ret" to mmc_blk_rq_cmd_err() to old_req_pending so it becomes evident that this is an older state, and it is returned only if we fail to get the number of written blocks from an SD card in the function mmc_sd_num_wr_blocks(). - Augment the while() loop in mmc_blk_rq_cmd_abort(): it is evident now that we know this is a bool variable, that the function is just spinning waiting for blk_end_request() to return false. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: block: return errorcode from mmc_sd_num_wr_blocks()Linus Walleij1-8/+11
mmc_sd_num_wr_blocks() has an interesting construction that saves one return argument by casting (u32)-1 as error code if something goes wrong. This is however a bit confusing when the normal kernel pattern is to return an int error code on success. So instead pass a variable "blocks" that the function can fill in with the number of successfully transferred blocks and return an integer as error code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [Ulf: Changed a return code to -EIO, reported by Dan Carpenter and fixed by Linus Walleij]
2017-02-14mmc: core: fix multi-bit bus width without high-speed modeAnssi Hannula1-2/+2
Commit 577fb13199b1 ("mmc: rework selection of bus speed mode") refactored bus width selection code to mmc_select_bus_width(). However, it also altered the behavior to not call the selection code in non-high-speed modes anymore. This causes 1-bit mode to always be used when the high-speed mode is not enabled, even though 4-bit and 8-bit bus are valid bus widths in the backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed Modes in JEDEC 84-B50). This results in a significant regression in transfer speeds. Fix the code to allow 4-bit and 8-bit widths even without high-speed mode, as before. Tested with a Zynq-7000 PicoZed 7020 board. Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: queue: turn queue flags into boolsLinus Walleij3-12/+11
Instead of masking and setting two bits in the "flags" field for the mmc_queue, just use two bools named "suspended" and "new_request". The masking and setting would likely have race conditions anyways, it is better to use a simple member like this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: rename mmc_active to areqLinus Walleij2-8/+8
The mmc_active member of struct mmc_queue_req has a very confusing name: this is certainly not always "active", it is the asynchronous request associated by the mmc_queue_req but it is not guaranteed to be "active" in any sense, such as being running on the host. Simply rename this member to "areq". Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: refactor mmc_blk_rw_try_restart()Linus Walleij1-14/+21
The mmc_blk_rw_start_new() was named after the label inside mmc_blk_issue_rw_rq() but is really a confusing name for this function: what it does is to try to restart the latest issued command on the host and card of the current MMC queue. So rename it mmc_blk_rw_try_restart() that reflects what it is doing and at this point also refactore the function to treat the removed card as an exception and just exit if this happens and run on in the function if that is not happening. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: rename mmc_start_req() to *areq()Linus Walleij3-15/+15
With the coexisting __mmc_start_request(), mmc_start_request() and __mmc_start_req() it is a bit confusing that mmc_start_req() actually does not start a normal request, but an asynchronous request. Rename it to mmc_start_areq() to make it explicit what the function is doing, also fix the kerneldoc for this function while we're at it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: rename rqc and reqLinus Walleij1-28/+28
In the function mmc_blk_issue_rw_rq() the new request coming in from the block layer is called "rqc" and the old request that was potentially just returned back from the asynchronous mechanism is called "req". This is really confusing when trying to analyze and understand the code, it becomes a perceptual nightmare to me. Maybe others have better parserheads but it is not working for me. Rename "rqc" to "new_req" and "req" to "old_req" to reflect what is semantically going on into the syntax. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: inline the command abort and start new goto:sLinus Walleij1-19/+27
The goto statements sprinkled over the mmc_blk_issue_rw_rq() function has grown over the years and makes the code pretty hard to read. Inline the calls such that: goto cmd_abort; -> mmc_blk_rw_cmd_abort(card, req); mmc_blk_rw_start_new(mq, card, rqc); return; goto start_new_req; -> mmc_blk_rw_start_new(mq, card, rqc); return; After this it is more clear how we exit the do {} while loop in this function, and it gets possible to split the code apart. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: switch to ida_simple_ functions in block.cHeiner Kallweit1-26/+5
ida code in block.c can be significantly simplified by switching to the ida_simple_ functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: avoid possible overflow of timeout valueRavikumar Kattekola1-4/+5
Fixes: a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") when using really large timeout (up to 4*60*1000 ms for bkops) there is a possibility of data overflow using unsigned int so use 64 bit unsigned long long. Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6Kishon Vijay Abraham I1-6/+14
commit e2bf08d643a244ccb ("omap_hsmmc: set a large data timeout for commands with busy signal") sets an arbitrary timeout value (100ms) for commands like CMD6 (MMC SWITCH). However extended CSD register defined in the eMMC standard has a field for GENERIC_CMD6_TIME which indicates the default maximum timeout for a SWITCH command. Use busy_timeout of cmd structure (populated with GENERIC_CMD6_TIME in the case of SWITCH command) to program the data timeout value in omap_hsmmc driver. SWITCH command to turn the cache on took more than 100ms to complete with MICRON eMMC card present in AM572x IDK REV 1.3A resulting in timeout and failed enumeration. It is fixed here by programming the timeout with the value advertised in GENERIC_CMD6_TIME. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: reset cmd line on ceb errorRavikumar Kattekola1-1/+1
When CEB (command end bit error) occurs reset CMD line to avoid system ending up in erroneous state. While command line is reset for CTO and CCRC errors, it's not done for CEB error. Fix it here. Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: dw_mmc: silent verbose log when calling from PM contextShawn Lin1-5/+7
When deploying runtime PM, it's quite verbose to print the log of ios setting. Also it's useless to print it from system PM as it should be the same with booting time. We also have sysfs to get all these information from ios attribute, so let's skip this print from PM context. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core/mmci: restore pre/post_req behaviourLinus Walleij3-11/+8
commit 64b12a68a9f74bb32d8efd7af1ad8a2ba02fc884 "mmc: core: fix prepared requests while doing bkops" is fixing a bug in the wrong way. A bug in the MMCI device driver is fixed by amending the MMC core. Thinking about it: what the pre- and post-callbacks are doing is to essentially map and unmap SG lists for DMA transfers. Why would we not be able to do that just because a BKOPS command is sent inbetween? Having to unprepare/prepare the next asynchronous request for DMA seems wrong. Looking the backtrace in that commit we can see what the real problem actually is: mmci_data_irq() is calling mmci_dma_unmap() twice which is goung to call arm_dma_unmap_sg() twice and v7_dma_inv_range() twice for the same sglist and that will crash. This happens because a request is prepared, then a BKOPS is sent. The IRQ completing the BKOPS command goes through mmci_data_irq() and thinks that a DMA operation has just been completed because dma_inprogress() reports true. It then proceeds to unmap the sglist. But that was wrong! dma_inprogress() should NOT be true because no DMA was actually in progress! We had just prepared the sglist, and the DMA channel dma_current has been configured, but NOT started! Because of this, the sglist is already unmapped when we get our actual data completion IRQ, and we are unmapping the sglist once more, and we get this crash. Therefore, we need to revert this solution pushing the problem to the core and causing problems, and instead augment the implementation such that dma_inprogress() only reports true if some DMA has actually been started. After this we can keep the request prepared during the BKOPS and we need not unprepare/reprepare it. Fixes: 64b12a68a9f7 ("mmc: core: fix prepared requests while doing bkops") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Add more debug informationsMaxime Ripard1-4/+19
Add a bit more debug messages that can be helpful when debugging the clock setup. Also fill the actual_clock field in struct mmc_host to report properly the current frequency in debugfs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Add EMMC (MMC2) controller compatibleMaxime Ripard1-0/+8
The MMC2 controller on the A64 is kind of a special beast. While the general controller design is the same than the other MMC controllers in the SoC, it also has a bunch of features and changes that prevent it to be driven in the same way. It has for example a different bus width limit, a different maximum frequency, and, for some reason, the maximum buffer size of a DMA descriptor. Add a new compatible specifically for this controller. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Mask DATA0 when updating the clockMaxime Ripard1-1/+13
The A64 MMC controllers need DATA0 to be masked while updating the clock, otherwise any subsequent command will result in a timeout. It's not really clear at this point what DATA0 is exactly, but this behaviour is present in Allwinner's tree, and has been suggested by Allwinner engineers as fixes for the timeout. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Enable the new timings for the A64 MMC controllersMaxime Ripard1-0/+6
The A64 MMC controllers need to set a "new timings" bit when a new rate is set. The actual meaning of that bit is not clear yet, but not setting it leads to some corner-case issues, like the CMD53 failing, which is used to implement SDIO packet aggregation. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Always set signal delay to 0 for A64Maxime Ripard1-33/+17
Experience have shown that the using the autocalibration could severely degrade the performances of the MMC bus. Allwinner is using in its BSP a delay set to 0 for all the modes but HS400. Remove the calibration code for now, and add comments to document our findings. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Gate the clock when rate is 0Maxime Ripard1-1/+4
The MMC core assumes that the code will gate the clock when the bus frequency is set to 0, which we've been ignoring so far. Handle that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sunxi: Fix clock frequency change sequenceMaxime Ripard1-4/+4
The SD specification documents that the clock frequency should only be changed once gated (Section 3.2.3 - SD Clock Frequency Change Sequence). The current code first modifies the parent clock, gates it and then modifies the internal divider. This means that since the parent clock rate might be changed, the bus clock might be changed as well before it is gated, which breaks the specification. Move the gating before the parent rate modification. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: fix error path in mmc_host_allocHeiner Kallweit1-0/+2
Properly reverse everything if mmc_gpio_alloc(host) fails. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: simplify ida handlingHeiner Kallweit1-16/+4
ida handling can be simplified by switching to the ida_simple_ functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Remove unnecessary comments of CDC init sequenceRitesh Harjani1-13/+1
This removes CDC init sequence comments which are not useful anyway. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: sdhci-msm: Remove platform_execute_tuning from sdhci_msm_opsRitesh Harjani1-3/+4
platform_execute_tuning should not really exist as it does not do anything useful. So remove this ops and directly plug sdhci_msm_execute_tuning with mmc_host_ops. Also in case of HS400 tuning clear SDHCI_HS400_TUNING flag once HS400 related mode selection is done. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: Extend mmc_of_parse() to check for mmc-ddr-3_3vUlf Hansson1-0/+2
When mmc_of_parse() finds the binding, it sets the mmc cap, MMC_CAP_3_3V_DDR, which informs the core whether eMMC DDR at 3.3V I/O is supported by the mmc host. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jan Glauber <jglauber@cavium.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>