summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2013-09-10Merge tag 'mmc-updates-for-3.12-rc1' of ↵Linus Torvalds32-189/+298
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.12: Core: - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB. - The slot-gpio helper can now handle GPIO debouncing card-detect. - Read supported voltages from DT "voltage-ranges" property. Drivers: - dw_mmc: Add support for ARC architecture, and support exynos5420. - mmc_spi: Support CD/RO GPIOs. - sh_mobile_sdhi: Add compatibility for more Renesas SoCs. - sh_mmcif: Add DT support for DMA channels" * tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (50 commits) Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data" mmc: dw_mmc: Add support for ARC mmc: sdhci-s3c: initialize host->quirks2 for using quirks2 mmc: sdhci-s3c: fix the wrong register value, when clock is disabled mmc: esdhc: add support to get voltage from device-tree mmc: sdhci: get voltage from sdhc host mmc: core: parse voltage from device-tree mmc: omap_hsmmc: use the generic config for omap2plus devices mmc: omap_hsmmc: clear status flags before starting a new command mmc: dw_mmc: exynos: Add a new compatible string for exynos5420 mmc: sh_mmcif: revision-specific CLK_CTRL2 handling mmc: sh_mmcif: revision-specific Command Completion Signal handling mmc: sh_mmcif: add support for Device Tree DMA bindings mmc: sh_mmcif: move header include from header into .c mmc: SDHI: add DT compatibility strings for further SoCs mmc: dw_mmc-pci: enable bus-mastering mode mmc: dw_mmc-pci: get resources from a proper BAR mmc: tmio-mmc: Remove .set_pwr() callback from platform data mmc: tmio-mmc: Remove .get_cd() callback from platform data mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data ...
2013-09-07Merge tag 'mfd-3.12-1' of ↵Linus Torvalds1-19/+51
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next Pull MFD (multi-function device) updates from Samuel Ortiz: "For the 3.12 merge window we have one new driver for the DA9063 PMIC from Dialog Semiconductor. Besides that driver we also have: - Device tree support for the s2mps11 driver - More devm_* conversion for the pm8921, max89xx, menelaus, tps65010, wl1273 and pcf50633-adc drivers. - A conversion to threaded IRQ and IRQ domain for the twl6030 driver. - A fairly big update for the rtsx driver: Better power saving support, better vendor settings handling, and a few fixes. - Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the Kontron driver. - A conversion to the dev_get_platdata() API for all MFD drivers. - A removal of non-DT (legacy) support for the twl6040 driver. - A few fixes and additions (Mic detect level) to the wm5110 register tables. - Regmap support for the davinci_voicecodec driver. - The usual bunch of minor cleanups and janitorial fixes" * tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (81 commits) mfd: ucb1x00-core: Rewrite ucb1x00_add_dev() mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for event name mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfs mfd: timberdale: Use module_pci_driver mfd: timberdale: Remove redundant break mfd: timberdale: Staticize local variables mfd: ab8500-debugfs: Staticize local variables mfd: db8500-prcmu: Staticize clk_mgt mfd: db8500-prcmu: Use ANSI function declaration mfd: omap-usb-host: Staticize usbhs_driver_name mfd: 88pm805: Fix potential NULL pdata dereference mfd: 88pm800: Fix potential NULL pdata dereference mfd: twl6040: Use regmap for register cache mfd: davinci_voicecodec: Provide a regmap for register I/O mfd: davinci_voicecodec: Remove unused read and write functions mmc: memstick: rtsx: Modify copyright comments mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail mfd: mmc: rtsx: Change default tx phase mfd: pcf50633-adc: Use devm_*() functions mfd: rtsx: Copyright modifications ...
2013-09-06Merge tag 'boards-for-linus' of ↵Linus Torvalds1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
2013-09-06Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data"Chris Ball2-0/+8
This reverts commit 3af9d15c719017feb63fa99f89ac6009a5a3d467, which causes a build failure: drivers/mfd/asic3.c:724:2: error: unknown field 'set_pwr' specified in initializer
2013-08-30mmc: memstick: rtsx: Modify copyright commentsWei WANG1-2/+1
Update copyright date, and remove author address. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage failWei WANG1-1/+8
If switching voltage fails, SD_CLK toggle enable bit should been cleared so that SD host can control SD clock automatically. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30mfd: mmc: rtsx: Change default tx phaseWei WANG1-16/+42
The default phase can meet most cards' requirement, but it is not the optimal one. In some extreme situation, the rx phase point produced by the following tuning process will drift quite a distance. Before tuning UHS card, this patch will set a more proper initial tx phase point, which is calculated from statistic data, and can achieve a much better tx signal quality. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-29mmc: dw_mmc: Add support for ARCMischa Jonker1-1/+1
Adapt Kconfig to include ARC in supported architectures Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29mmc: sdhci-s3c: initialize host->quirks2 for using quirks2Jaehoon Chung1-0/+1
In order to use the quirks2, initialized the host->quirks2. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <Kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29mmc: sdhci-s3c: fix the wrong register value, when clock is disabledJaehoon Chung1-2/+5
When use the QUIRK_NONSTANDARD_CLOCK, then never set to 0 at clock control register. This patch fixes this problem. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29Merge tag 'bcm-for-3.12-late-soc' of git://github.com/broadcom/bcm11351 into ↵Olof Johansson1-2/+1
next/boards From Christian Daudt, late changes for 3.12 broadcom mmc driver. Small trivial changes so I'll take them through arm-soc. * tag 'bcm-for-3.12-late-soc' of git://github.com/broadcom/bcm11351: mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
2013-08-27mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_eventSachin Kamat1-1/+1
sdhci_bcm_kona_card_event is referenced only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Christian Daudt <csd@broadcom.com>
2013-08-27mmc: sdhci-bcm-kona: Remove unneeded version.h inclusionSachin Kamat1-1/+0
version.h header inclusion is not necessary as detected by versioncheck. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Christian Daudt <csd@broadcom.com>
2013-08-26mmc: esdhc: add support to get voltage from device-treeHaijun Zhang1-0/+1
Add suppport to get voltage from device-tree node for esdhc host, if voltage-ranges was specified in device-tree node we can get ocr_mask instead of read from host capacity register. If not voltages still can be get from host capacity register. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26mmc: sdhci: get voltage from sdhc hostHaijun Zhang1-0/+3
We use host->ocr_mask to hold the voltage get from device-tree node, In case host->ocr_mask was available, we use host->ocr_mask as the final available voltage can be used by MMC/SD/SDIO card. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26mmc: core: parse voltage from device-treeHaijun Zhang1-0/+44
Add function to support getting voltage from device-tree. If voltage-range is specified in device-tree node, this function will parse it and return the available voltage mask. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: omap_hsmmc: use the generic config for omap2plus devicesAmarinder Bindra1-3/+3
OMAP's hs_mmc driver is used for MMC controller operation on many omap2plus SoCs (OMAP2430, OMAP3, 4, 5 and AM335x). Considering that the device tree entries are already present for these, allow the driver to be built using the config ARCH_OMAP2PLUS rather than individually adding a config for each SoC to enable the support. Use COMPILE_TEST to enable the build for other platforms. Signed-off-by: Amarinder Bindra <a-bindra@ti.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Nishanth Menon <nm@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: omap_hsmmc: clear status flags before starting a new commandFrancesco Lavra1-1/+1
Commit 1f6b9fa40e76fffaaa0b3bd6a0bfdcf1cdc06efa consolidated writes to the STAT register in one location, moving them from omap_hsmmc_do_irq() to omap_hsmmc_irq(). This move has the unwanted side effect that the controller status flags are potentially cleared after a new command has been started as a consequence of reading the previous status flags. This means that if the new command changes the status flags before the IRQ routine returns, those flags may be cleared without handling the event which asserted them, and thus missing the event. Move the writing of the STAT register back in omap_hsmmc_do_irq(), before handling the status flags which generated the interrupt. Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Reviewed-and-Tested-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: dw_mmc: exynos: Add a new compatible string for exynos5420Yuvaraj Kumar C D1-1/+8
The Exynos5420 has a DWMMC controller which is different from prior versions.This patch adds a new compatible string for Exynos5420. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: revision-specific CLK_CTRL2 handlingGuennadi Liakhovetski1-0/+4
Some newer MMCIF IP revisions contain a CE_CLK_CTRL2 register, that has to be set for proper operation. Support for this feature is added in a way to preserve the current behaviour by default, i.e. when it is not enabled in platform data. Patch is based on work by Nobuyuki HIRAI. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: revision-specific Command Completion Signal handlingGuennadi Liakhovetski1-6/+21
Some earlier MMCIF IP revisions contained Command Completion Signal support, which has been dropped again in modern versions. Sopport for this feature is added in a way to preserve the current behaviour by default, i.e. when it is not enabled in platform data. Patch is based on work by Nobuyuki HIRAI. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: add support for Device Tree DMA bindingsGuennadi Liakhovetski1-10/+16
To use DMA in the Device Tree case the driver has to be modified to use suitable API to obtain DMA channels. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: move header include from header into .cGuennadi Liakhovetski1-0/+1
sh_dma.h isn't needed in sh_mmcif.h, move it into sh_mmcif.c. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: SDHI: add DT compatibility strings for further SoCsGuennadi Liakhovetski1-0/+5
Add further OF compatibility strings to the SDHI driver to be able to precisely control driver's behaviour on each of them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: dw_mmc-pci: enable bus-mastering modeAndy Shevchenko1-0/+2
This patch enables bus-mastering mode for MMC controller to allow IDMAC transfers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Prabu Thangamuthu <Prabu.T@synopsys.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: dw_mmc-pci: get resources from a proper BARAndy Shevchenko1-1/+1
There is a typo when the mapped space is from BAR 2, but BAR 0 is used instead. This patch fixes the typo. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Prabu Thangamuthu <Prabu.T@synopsys.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: tmio-mmc: Remove .set_pwr() callback from platform dataLaurent Pinchart2-8/+0
The .set_pwr() callback isn't used anymore as all platforms register GPIO-controlled regulators. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: tmio-mmc: Remove .get_cd() callback from platform dataLaurent Pinchart1-15/+1
All platforms pass the CD GPIO number to the driver in the .cd_gpio field. The .get_cd() callback isn't used anymore, remove it Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform dataLaurent Pinchart1-9/+0
The .set_pwr() callback isn't used anymore as all platforms register GPIO-controlled regulators. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform dataLaurent Pinchart1-9/+0
All platforms pass the CD GPIO number to the driver in the .cd_gpio field. The .get_cd() callback isn't used anymore, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sh_mmcif: Remove .set_pwr() callback from platform dataLaurent Pinchart1-3/+0
The .set_pwr() callback isn't used anymore as all platforms register GPIO-controlled regulators. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: mmc_spi: Remove platform data .get_cd() and .get_ro() callbacksLaurent Pinchart1-22/+2
All platforms now pass the CD and RO GPIOs to the MMC SPI driver, those callbacks are not used anymore. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: mmc_spi: Support CD/RO GPIOsLaurent Pinchart2-43/+36
Add support for passing CD/RO GPIO numbers directly to the mmc_spi driver instead of relying solely on board code callbacks to retrieve the CD/RO signals values. The driver will enable debouncing on the card detect GPIO if the cd_debounce field is set to a non-zero value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()Laurent Pinchart9-9/+23
Add a debounce parameter to the mmc_gpio_request_cd() function that enables GPIO debouncing when set to a non-zero value. This can be used by MMC host drivers to enable debouncing on the card detect signal. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: dw_mmc-pltfm: include 'dw_mmc-pltfm.h'Jingoo Han1-0/+1
Include 'dw_mmc-pltfm.h' header file in order to fix the following sparse warnings: drivers/mmc/host/dw_mmc-pltfm.c:36:5: warning: symbol 'dw_mci_pltfm_register' was not declared. Should it be static? drivers/mmc/host/dw_mmc-pltfm.c:94:1: warning: symbol 'dw_mci_pltfm_pmops' was not declared. Should it be static? drivers/mmc/host/dw_mmc-pltfm.c:118:5: warning: symbol 'dw_mci_pltfm_remove' was not declared. Should it be static? Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: tmio_mmc_dma: fix PIO fallback on SDHISergei Shtylyov1-2/+2
I'm testing SH-Mobile SDHI driver in DMA mode with a new DMA controller using 'bonnie++' and getting DMA error after which the tmio_mmc_dma.c code falls back to PIO but all commands time out after that. It turned out that the fallback code calls tmio_mmc_enable_dma() with RX/TX channels already freed and pointers to them cleared, so that the function bails out early instead of clearing the DMA bit in the CTL_DMA_ENABLE register. The regression was introduced by commit 162f43e31c5a376ec16336e5d0ac973373d54c89 (mmc: tmio: fix a deadlock). Moving tmio_mmc_enable_dma() calls to the top of the PIO fallback code in tmio_mmc_start_dma_{rx|tx}() helps. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: dw_mmc: add missing MFD_SYSCON dependency for SOCFPGAJingoo Han1-1/+1
Added missing MFD_SYSCON dependency for SOCFPGA in order to fix the following link error. drivers/mmc/host/dw_mmc-socfpga.c:49: undefined reference to `syscon_regmap_lookup_by_compatible' Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: core: Set data timeout for mmc bus test commands (CMD14 and CMD19).Minjian Wu1-0/+1
Signed-off-by: Minjian Wu <minjianwu@micron.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: fix null pointer use in mmc_blk_remove_reqFranck Jullien1-1/+1
A previous commit (fdfa20c1631210d0) reordered the shutdown sequence in mmc_blk_remove_req. However, mmc_cleanup_queue is now called before we get the card pointer, and mmc_cleanup_queue sets mq->card to NULL. This patch moves the card pointer assignment before mmc_cleanup_queue. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: mmc_test: replace strict_strtol() with kstrtol_from_user()Jingoo Han1-10/+4
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Also, both kstrtol() and copy_from_user() can be replaced with kstrtol_from_user() to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: atmel-mci: prepare clk before calling enableBoris BREZILLON1-7/+27
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sd: fix the maximum au_size for SD3.0Jaehoon Chung1-2/+5
Since SD Physical Layer specification V3.0, AU_SIZE is supported up to 0xf. So If SD-card is supported v3.0, then max_au should be 0xf. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: core: free mmc_card if cmd 3,9,7 fails in mmc_sd_init_cardWei WANG1-3/+3
In function mmc_sd_init_card, if command 3/9/7 got failed, mmc_card allocated just before won't be freed. This would cause memory leak. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: host: Remove a duplicate line in MakefileWei WANG1-2/+0
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: omap_hsmmc: fix dependency on indirect header inclusionFelipe Balbi1-0/+1
omap_hsmmc.c depends on <linux/sizes.h> being included indirectly by another header. Once we enable COMPILE_TEST for this driver, we might compile under architectures which won't include <linux/sizes.h> for us. In fact, one such case is x86. In order to prevent compile breakages, let's explicitly include <linux/sizes.h>. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: dw_mmc: Handle DW_MCI_QUIRK_IDMAC_DTO properlyDoug Anderson1-11/+10
In (1fb5f68 mmc: dw_mmc: Don't loop when handling an interrupt), the code for handling DW_MCI_QUIRK_IDMAC_DTO became dead code. Move it to where it ought to live. Found by code inspection and compile-tested only--I don't know of any boards that need DW_MCI_QUIRK_IDMAC_DTO. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: block: fix a bug of error handling in MMC driverKOBAYASHI Yoshitake1-3/+42
Current MMC driver doesn't handle generic error (bit19 of device status) in write sequence. As a result, write data gets lost when generic error occurs. For example, a generic error when updating a filesystem management information causes a loss of write data and corrupts the filesystem. In the worst case, the system will never boot. This patch includes the following functionality: 1. To enable error checking for the response of CMD12 and CMD13 in write command sequence 2. To retry write sequence when a generic error occurs Messages are added for v2 to show what occurs. Signed-off-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sdhci: request irq after sdhci_init() is calledShawn Guo1-2/+2
Generally request_irq() should be called after hardware has been initialized into a sane state. However, sdhci driver currently calls request_irq() before sdhci_init(). At least, the following kernel panic seen on i.MX6 is caused by that. The sdhci controller on i.MX6 may have noisy glitch on DAT1 line, which will trigger SDIO interrupt handling once request_irq() is called. But at this point, the SDIO interrupt handler host->sdio_irq_thread has not been registered yet. Thus, we see the NULL pointer access with wake_up_process(host->sdio_irq_thread) in mmc_signal_sdio_irq(). Fix the panic by simply reverse the calling sequence between request_irq() and sdhci_init(). sdhci-pltfm: SDHCI platform and OF driver helper mmc0: no vqmmc regulator found mmc0: no vmmc regulator found Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #3 task: 9f860000 ti: 9f862000 task.ti: 9f862000 PC is at wake_up_process+0xc/0x44 LR is at sdhci_irq+0x378/0x93c pc : [<8004f768>] lr : [<803fb698>] psr: 40000193 sp : 9f863ba0 ip : 9f863bb8 fp : 9f863bb4 r10: 9f807900 r9 : 80761fbc r8 : 00000000 r7 : 00000000 r6 : 00000000 r5 : 00000001 r4 : 9fa68000 r3 : 00000001 r2 : 00000002 r1 : 20000193 r0 : 00000000 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 8000404a DAC: 00000017 Process swapper/0 (pid: 1, stack limit = 0x9f862238) Stack: (0x9f863ba0 to 0x9f864000) 3ba0: 00000001 9fa68000 9f863c04 9f863bb8 803fb698 8004f768 8011af00 80265aac 3bc0: 00000000 000003d9 00000000 9fa51880 00000001 00000000 9f863c14 9fa53640 3be0: 00000001 00000000 00000000 00000036 80761fbc 9f807900 9f863c3c 9f863c08 3c00: 80075154 803fb32c 802c2b38 802c63d8 802c63cc 9f807900 00000001 9f862000 3c20: 00000036 00000000 9f807930 60000113 9f863c54 9f863c40 800752ec 8007510c 3c40: 9f807900 00000001 9f863c6c 9f863c58 80078324 800752a8 00000036 8071fd64 3c60: 9f863c84 9f863c70 80074ac0 80078294 00000140 8072ab78 9f863cac 9f863c88 3c80: 8000ee34 80074aa4 00000000 a080e10c 8072acbc 9f863cd0 a080e100 00000036 3ca0: 9f863ccc 9f863cb0 80008600 8000edec 805386a8 60000113 ffffffff 9f863d04 3cc0: 9f863d24 9f863cd0 8000e0c0 800085dc 9f807950 60000113 00000007 00000000 3ce0: 9f807900 9fa53640 9f807950 9fa68240 00000036 9f807930 60000113 9f863d24 3d00: 9f863d28 9f863d18 80076834 805386a8 60000113 ffffffff 9f863d64 9f863d28 3d20: 80076834 80538688 00000000 800bfe4c 00002fac 00000001 9f863d54 9fa53640 3d40: 9f807900 803fb320 9fa68240 00000080 00000000 00000036 9f863d94 9f863d68 3d60: 80076b38 80076674 00000080 9fa68240 9fa68000 04000000 9fa6836c 9fa68380 3d80: 806d620c 80700350 9f863dc4 9f863d98 803fce8c 80076a88 9fa532c0 9fa68240 3da0: 9fa51490 9fa51490 9fa68240 00000000 9f8ae600 9f81d080 9f863df4 9f863dc8 3dc0: 803fea0c 803fc808 9f863de4 9f863dd8 80125850 807b1ed8 807576b8 9f8ae610 3de0: 00000000 807576b8 9f863e04 9f863df8 802ee0d4 803fe798 9f863e2c 9f863e08 3e00: 802ecd1c 802ee0c0 00000000 9f8ae610 807576b8 9f8ae644 00000000 000000a9 3e20: 9f863e4c 9f863e30 802ecec0 802ecc30 9f83355c 807576b8 802ece2c 00000000 3e40: 9f863e74 9f863e50 802eb3d8 802ece38 9f83355c 9f8ac3b4 9f833570 807576b8 3e60: 80746e70 9fa51400 9f863e84 9f863e78 802ec838 802eb388 9f863eb4 9f863e88 3e80: 802ec3d0 802ec824 80692748 807620c0 9f863eb4 807576b8 00000006 807620c0 3ea0: 00000000 000000a9 9f863edc 9f863eb8 802ed3e8 802ec2fc 9f862000 00000006 3ec0: 807620c0 00000000 000000a9 80700350 9f863eec 9f863ee0 802ee2f8 802ed374 3ee0: 9f863efc 9f863ef0 80700364 802ee2b8 9f863f54 9f863f00 8000870c 8070035c 3f00: 9f863f54 9f863f10 9f862000 00000000 00000000 00000006 00000006 806d3aa4 3f20: 00000000 80688b18 9f863f54 80713560 00000006 80713540 807620c0 000000a9 3f40: 806d620c 8071ec24 9f863f94 9f863f58 806d6994 800086dc 00000006 00000006 3f60: 806d620c f6bfffff fb7f5df7 00000000 8052da28 00000000 00000000 00000000 3f80: 00000000 00000000 9f863fac 9f863f98 8052da38 806d689c ffffffff 00000000 3fa0: 00000000 9f863fb0 8000e5d8 8052da34 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d9cdf5ff 1fff5ffe Backtrace: [<8004f75c>] (wake_up_process+0x0/0x44) from [<803fb698>] (sdhci_irq+0x378/0x93c) r4:9fa68000 r3:00000001 [<803fb320>] (sdhci_irq+0x0/0x93c) from [<80075154>] (handle_irq_event_percpu+0x54/0x19c) [<80075100>] (handle_irq_event_percpu+0x0/0x19c) from [<800752ec>] (handle_irq_event+0x50/0x70) [<8007529c>] (handle_irq_event+0x0/0x70) from [<80078324>] (handle_fasteoi_irq+0x9c/0x170) r5:00000001 r4:9f807900 [<80078288>] (handle_fasteoi_irq+0x0/0x170) from [<80074ac0>] (generic_handle_irq+0x28/0x38) r5:8071fd64 r4:00000036 [<80074a98>] (generic_handle_irq+0x0/0x38) from [<8000ee34>] (handle_IRQ+0x54/0xb4) r4:8072ab78 r3:00000140 [<8000ede0>] (handle_IRQ+0x0/0xb4) from [<80008600>] (gic_handle_irq+0x30/0x64) r8:00000036 r7:a080e100 r6:9f863cd0 r5:8072acbc r4:a080e10c r3:00000000 [<800085d0>] (gic_handle_irq+0x0/0x64) from [<8000e0c0>] (__irq_svc+0x40/0x54) Exception stack(0x9f863cd0 to 0x9f863d18) 3cc0: 9f807950 60000113 00000007 00000000 3ce0: 9f807900 9fa53640 9f807950 9fa68240 00000036 9f807930 60000113 9f863d24 3d00: 9f863d28 9f863d18 80076834 805386a8 60000113 ffffffff r7:9f863d04 r6:ffffffff r5:60000113 r4:805386a8 [<8053867c>] (_raw_spin_unlock_irqrestore+0x0/0x30) from [<80076834>] (__setup_irq+0x1cc/0x414) [<80076668>] (__setup_irq+0x0/0x414) from [<80076b38>] (request_threaded_irq+0xbc/0x140) [<80076a7c>] (request_threaded_irq+0x0/0x140) from [<803fce8c>] (sdhci_add_host+0x690/0xb88) [<803fc7fc>] (sdhci_add_host+0x0/0xb88) from [<803fea0c>] (sdhci_esdhc_imx_probe+0x280/0x4d4) r8:9f81d080 r7:9f8ae600 r6:00000000 r5:9fa68240 r4:9fa51490 [<803fe78c>] (sdhci_esdhc_imx_probe+0x0/0x4d4) from [<802ee0d4>] (platform_drv_probe+0x20/0x24) r8:807576b8 r7:00000000 r6:9f8ae610 r5:807576b8 r4:807b1ed8 [<802ee0b4>] (platform_drv_probe+0x0/0x24) from [<802ecd1c>] (driver_probe_device+0xf8/0x208) [<802ecc24>] (driver_probe_device+0x0/0x208) from [<802ecec0>] (__driver_attach+0x94/0x98) r8:000000a9 r7:00000000 r6:9f8ae644 r5:807576b8 r4:9f8ae610 r3:00000000 [<802ece2c>] (__driver_attach+0x0/0x98) from [<802eb3d8>] (bus_for_each_dev+0x5c/0x90) r6:00000000 r5:802ece2c r4:807576b8 r3:9f83355c [<802eb37c>] (bus_for_each_dev+0x0/0x90) from [<802ec838>] (driver_attach+0x20/0x28) r6:9fa51400 r5:80746e70 r4:807576b8 [<802ec818>] (driver_attach+0x0/0x28) from [<802ec3d0>] (bus_add_driver+0xe0/0x234) [<802ec2f0>] (bus_add_driver+0x0/0x234) from [<802ed3e8>] (driver_register+0x80/0x14c) r8:000000a9 r7:00000000 r6:807620c0 r5:00000006 r4:807576b8 [<802ed368>] (driver_register+0x0/0x14c) from [<802ee2f8>] (platform_driver_register+0x4c/0x60) [<802ee2ac>] (platform_driver_register+0x0/0x60) from [<80700364>] (sdhci_esdhc_imx_driver_init+0x14/0x1c) [<80700350>] (sdhci_esdhc_imx_driver_init+0x0/0x1c) from [<8000870c>] (do_one_initcall+0x3c/0x164) [<800086d0>] (do_one_initcall+0x0/0x164) from [<806d6994>] (kernel_init_freeable+0x104/0x1d0) [<806d6890>] (kernel_init_freeable+0x0/0x1d0) from [<8052da38>] (kernel_init+0x10/0xec) [<8052da28>] (kernel_init+0x0/0xec) from [<8000e5d8>] (ret_from_fork+0x14/0x3c) r4:00000000 r3:ffffffff Code: e89da800 e1a0c00d e92dd818 e24cb004 (e5903000) ---[ end trace e9af3588936b63f0 ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: mxs-mmc: Check the return value from stmp_reset_block()Fabio Estevam1-3/+11
stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: mxs-mmc: Use devm_clk_get()Fabio Estevam1-5/+3
Using devm_clk_get() allows us to remove the clk_put() calls, so let's use it to simplify the code. Rename the 'out_clk_put' label to 'out_clk_disable' now that clk_put is removed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 13:13:40 +0000