summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2019-07-11Merge tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds26-359/+666
Pull MMC updates from Ulf Hansson: "MMC core: - Let the dma map ops deal with bouncing and drop dma_max_pfn() from the dma-mapping interface for ARM - Convert the generic MMC DT doc to YAML schemas - Drop questionable support for powered-on re-init of SDIO cards at runtime resume and for SDIO HW reset - Prevent questionable re-init of powered-on removable SDIO cards at system resume - Cleanup and clarify some SDIO core code MMC host: - tmio: Make runtime PM enablement more flexible for variants - tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt to clarify - sdhci-pci: Add support for Intel EHL - sdhci-pci-o2micro: Enable support for 8-bit bus - sdhci-msm: Prevent acquiring a mutex while holding a spin_lock - sdhci-of-esdhc: Improve clock management and tuning - sdhci_am654: Enable support for 4 and 8-bit bus on J721E - sdhci-sprd: Use pinctrl for a proper signal voltage switch - sdhci-sprd: Add support for HS400 enhanced strobe mode - sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the clock - sdhci-sprd: Add support for optional gate clock - sunxi-mmc: Convert DT doc to YAML schemas - meson-gx: Add support for broken DRAM access for DMA MEMSTICK core: - Fixup error path of memstick_init()" * tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654 mmc: alcor: remove a redundant greater or equal to zero comparison mmc: sdhci-msm: fix mutex while in spinlock mmc: sdhci_am654: Make some symbols static dma-mapping: remove dma_max_pfn mmc: core: let the dma map ops handle bouncing dt-binding: mmc: rename tmio_mmc.txt to renesas,sdhi.txt mmc: sdhci-sprd: Add pin control support for voltage switch dt-bindings: mmc: sprd: Add pinctrl support mmc: sdhci-sprd: Add start_signal_voltage_switch ops mmc: sdhci-pci: Add support for Intel EHL mmc: tmio: Use dma_max_mapping_size() instead of a workaround mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card() mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card() mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume mmc: sdio: Drop powered-on re-init at runtime resume and HW reset mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card() mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore() mmc: sdio: Turn sdio_run_irqs() into static mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUS ...
2019-07-10mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654YueHaibing1-1/+1
Fix build error: drivers/mmc/host/sdhci_am654.o: In function `sdhci_am654_probe': drivers/mmc/host/sdhci_am654.c:464: undefined reference to `__devm_regmap_init_mmio_clk' drivers/mmc/host/sdhci_am654.o:(.debug_addr+0x3f8): undefined reference to `__devm_regmap_init_mmio_clk' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: aff88ff23512 ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: alcor: remove a redundant greater or equal to zero comparisonColin Ian King1-1/+1
A greater or equal comparison on the unsigned int variable tmp_diff is always true as unsigned ints are never negative. Hence the comparison is redundant and can be removed. Addresses-Coverity: ("Unsigned compared against 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: sdhci-msm: fix mutex while in spinlockJorge Ramirez-Ortiz1-3/+6
mutexes can sleep and therefore should not be taken while holding a spinlock. move clk_get_rate (can sleep) outside the spinlock protected region. Fixes: 83736352e0ca ("mmc: sdhci-msm: Update DLL reset sequence") Cc: stable@vger.kernel.org Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: sdhci_am654: Make some symbols staticYueHaibing1-3/+4
Fix sparse warnings: drivers/mmc/host/sdhci_am654.c:192:6: warning: symbol 'sdhci_j721e_4bit_set_clock' was not declared. Should it be static? drivers/mmc/host/sdhci_am654.c:261:18: warning: symbol 'sdhci_j721e_8bit_ops' was not declared. Should it be static? drivers/mmc/host/sdhci_am654.c:284:18: warning: symbol 'sdhci_j721e_4bit_ops' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: core: let the dma map ops handle bouncingChristoph Hellwig1-5/+2
Just like we do for all other block drivers. Especially as the limit imposed at the moment might be way to pessimistic for iommus. This also means we are not going to set a bounce limit for the queue, in case we have a dma mask. On most architectures it was never needed, the major hold out was x86-32 with PAE, but that has been fixed by now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: sdhci-sprd: Add pin control support for voltage switchBaolin Wang1-0/+54
For Spreadtrum SD card voltage switching, besides regulator setting, it also need switch related pin's state to output corresponding voltage. This patch adds pin control operation to support voltage switch. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: sdhci-sprd: Add start_signal_voltage_switch opsBaolin Wang1-0/+24
For Spreadtrum SD host controller, we can not use standard SD registers to change and detect the I/O voltage signals, since our voltage regulator for I/O is fixed in hardware, and no signals were connected to the SD controller. Thus add Spreadtrum specific voltage switch ops to change voltage instead of using standard SD host registers. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: sdhci-pci: Add support for Intel EHLAdrian Hunter2-0/+4
Add PCI Ids for Intel EHL. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: tmio: Use dma_max_mapping_size() instead of a workaroundYoshihiro Shimoda1-14/+4
Since the commit 133d624b1cee ("dma: Introduce dma_max_mapping_size()") provides a helper function to get the max mapping size, we can use the function instead of the workaround code for swiotlb. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-10mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card()Ulf Hansson1-11/+9
The "powered_resume" in-parameter to mmc_sdio_init_card() has now become redundant as all callers set it to 0. Therefore let's just drop it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org>
2019-07-10mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card()Ulf Hansson1-12/+6
The "powered_resume" in-parameter to mmc_sdio_reinit_card() has now become redundant as all callers set it to 0. Therefore let's just drop it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org>
2019-07-10mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resumeUlf Hansson1-7/+7
It looks like the original idea behind always doing a re-initialization of a removable SDIO card during system resume in mmc_sdio_resume(), is to try to play safe to detect whether the card has been removed. However, this seems like a really a bad idea as it will most likely screw things up, especially when the card is expected to remain powered on during system suspend by the SDIO func driver. Let's fix this, simply by trusting that the detect work checks if the card is alive and inserted, which is being scheduled at the PM_POST_SUSPEND notification anyway. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2019-07-10mmc: sdio: Drop powered-on re-init at runtime resume and HW resetUlf Hansson1-7/+1
To use the so called powered-on re-initialization of an SDIO card, the power to the card must obviously have stayed on. If not, the initialization will simply fail. In the runtime suspend case, the card is always powered off. Hence, let's drop the support for powered-on re-initialization during runtime resume, as it doesn't make sense. Moreover, during a HW reset, the point is to cut the power to the card and then do fresh re-initialization. Therefore drop the support for powered-on re-initialization during HW reset. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Fixes: ca8971ca5753 ("mmc: dw_mmc: Prevent runtime PM suspend when SDIO IRQs are enabled") Tested-by: Douglas Anderson <dianders@chromium.org>
2019-07-10mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card()Ulf Hansson1-17/+17
The comment in mmc_sdio_power_restore() belongs in mmc_sdio_reinit_card(), which was created during a previous commit that re-factored some code. Fix this by moving the comment into mmc_sdio_reinit_card(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2019-07-10mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore()Ulf Hansson1-4/+0
The function mmc_sdio_power_restore() is called either from mmc_sdio_runtime_resume() or from mmc_sdio_hw_reset(). Both callers either claims/releases the host or require its callers to do so. Therefore let's drop the redundant calls to mmc_claim|release_host() in mmc_sdio_power_restore(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org>
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds32-148/+32
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-20mmc: sdio: Turn sdio_run_irqs() into staticUlf Hansson1-2/+1
All external users of sdio_run_irqs() have converted into using the preferred sdio_signal_irq() interface, thus not calling the function directly any more. Avoid further new users of it, by turning it into static. Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner30-122/+30
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 463Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081202.258730266@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18Merge branch 'fixes' into nextUlf Hansson2-1/+16
2019-06-18mmc: core: Prevent processing SDIO IRQs when the card is suspendedUlf Hansson2-1/+16
Processing of SDIO IRQs must obviously be prevented while the card is system suspended, otherwise we may end up trying to communicate with an uninitialized SDIO card. Reports throughout the years shows that this is not only a theoretical problem, but a real issue. So, let's finally fix this problem, by keeping track of the state for the card and bail out before processing the SDIO IRQ, in case the card is suspended. Cc: stable@vger.kernel.org Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-18mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUSRaul E Rangel1-1/+1
Remove whitespace in front of SDHCI_CTRL_8BITBUS. The value is not part of SDHCI_CTRL_DMA_MASK. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-18mmc: sdhci: sdhci-pci-o2micro: Check if controller supports 8-bit widthRaul E Rangel1-1/+11
The O2 controller supports 8-bit EMMC access. JESD84-B51 section A.6.3.a defines the bus testing procedure that `mmc_select_bus_width()` implements. This is used to determine the actual bus width of the eMMC. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-18Merge branch 'fixes' into nextUlf Hansson1-1/+4
2019-06-18mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuningRaul E Rangel1-1/+4
The O2Micro controller only supports tuning at 4-bits. So the host driver needs to change the bus width while tuning and then set it back when done. There was a bug in the original implementation in that mmc->ios.bus_width also wasn't updated. Thus setting the incorrect blocksize in sdhci_send_tuning which results in a tuning failure. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Fixes: 0086fc217d5d7 ("mmc: sdhci: Add support for O2 hardware tuning") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-18Merge branch 'fixes' into nextUlf Hansson2-2/+80
2019-06-18mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()Douglas Anderson1-0/+40
We want SDIO drivers to be able to temporarily stop retuning when the driver knows that the SDIO card is not in a state where retuning will work (maybe because the card is asleep). We'll move the relevant functions to a place where drivers can call them. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-18mmc: core: API to temporarily disable retuning for SDIO CRC errorsDouglas Anderson2-2/+40
Normally when the MMC core sees an "-EILSEQ" error returned by a host controller then it will trigger a retuning of the card. This is generally a good idea. However, if a command is expected to sometimes cause transfer errors then these transfer errors shouldn't cause a re-tuning. This re-tuning will be a needless waste of time. One example case where a transfer is expected to cause errors is when transitioning between idle (sometimes referred to as "sleep" in Broadcom code) and active state on certain Broadcom WiFi SDIO cards. Specifically if the card was already transitioning between states when the command was sent it could cause an error on the SDIO bus. Let's add an API that the SDIO function drivers can call that will temporarily disable the auto-tuning functionality. Then we can add a call to this in the Broadcom WiFi driver and any other driver that might have similar needs. NOTE: this makes the assumption that the card is already tuned well enough that it's OK to disable the auto-retuning during one of these error-prone situations. Presumably the driver code performing the error-prone transfer knows how to recover / retry from errors. ...and after we can get back to a state where transfers are no longer error-prone then we can enable the auto-retuning again. If we truly find ourselves in a case where the card needs to be retuned sometimes to handle one of these error-prone transfers then we can always try a few transfers first without auto-retuning and then re-try with auto-retuning if the first few fail. Without this change on rk3288-veyron-minnie I periodically see this in the logs of a machine just sitting there idle: dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: sdhci-of-esdhc: use 1/2 periperhal clock for ls1028aYangbo Lu1-4/+5
LS1028A used 1/2 periperhal clock as one reference clock. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: sdhci-of-esdhc: set the sd clock divisor value above 3Yangbo Lu1-0/+8
This patch is to set the sd clock divisor value above 3 in tuning mode Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: host: s3cmci: no need to check return value of debugfs_create functionsGreg Kroah-Hartman2-23/+6
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, because there is no need to save the file dentries, remove them from the host-specific structure and just recursively delete the directory that the driver created, when shutting down. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: host: dw_mmc: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-29/+7
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: host: atmel-mci: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-31/+7
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: core: no need to check return value of debugfs_create functionsGreg Kroah-Hartman2-57/+9
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17Merge branch 'fixes' into nextUlf Hansson2-20/+25
2019-06-17mmc: mediatek: fix SDIO IRQ detection issuejjian zhou1-0/+2
If cmd19 timeout or response crcerr occurs during execute_tuning(), it need invoke msdc_reset_hw(). Otherwise SDIO IRQ can't be detected. Signed-off-by: jjian zhou <jjian.zhou@mediatek.com> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Yong Mao <yong.mao@mediatek.com> Fixes: 5215b2e952f3 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: mediatek: fix SDIO IRQ interrupt handle flowjjian zhou1-17/+20
SDIO IRQ is triggered by low level. It need disable SDIO IRQ detected function. Otherwise the interrupt register can't be cleared. It will process the interrupt more. Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Yong Mao <yong.mao@mediatek.com> Fixes: 5215b2e952f3 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: core: complete HS400 before checking statusWolfram Sang1-3/+3
We don't have a reproducible error case, yet our BSP team suggested that the mmc_switch_status() command in mmc_select_hs400() should come after the callback into the driver completing HS400 setup. It makes sense to me because we want the status of a fully setup HS400, so it will increase the reliability of the mmc_switch_status() command. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: ba6c7ac3a2f4 ("mmc: core: more fine-grained hooks for HS400 tuning") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: sdhci_am654: Add Support for 4 bit IP on J721EFaiz Abbas1-38/+86
Add support for 4 bit instances on TI's J721E devices. Because these instances have no DLL, introduce a DLL_PRESENT flag and make sure DLL related registers are only accessed when it is present. Also add a separate set_clock callback for this compatible. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-17mmc: sdhci_am654: Add Support for 8 bit IP on J721EFaiz Abbas1-25/+110
The 8 bit IP on the TI's J721E device departs from the AM654x IP in some ways which require special handling. Create a driver_data structure which holds the pltfm_data and a flags field which is used to indicate these differences. These are the following: 1. The pins are not muxed with anything else inside the SoC and hence the IOMUX_ENABLE field does not exist. Add a flag which is used to indicate the presence of the field. 2. The register field used to select DLL frequency is 3 bit wide as compared to 2 bits in AM65x. Add another flag which differentiates between 3 bit and 2 bit fields. 3. The strobe select field is 8 bit wide as compared to 4 bits for AM65x. Add yet another flag to indicate this difference. Strobe select is used only for HS400 speed mode, support for which has not yet been added in AM65x. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhi: remove unneeded initializationWolfram Sang1-1/+0
Bools are initialized to 'false' by default. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhi: improve quirk descriptionsWolfram Sang1-6/+6
Quirks show up in new SoCs as well, so the naming should be generic. Describe them by what they do. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10Merge branch 'fixes' into nextUlf Hansson1-2/+7
2019-06-10sdhci: tegra: Do not log error message on deferred probeThierry Reding1-1/+4
Recent changes have made it much more likely that clocks are not available, when the SDHCI driver is first probed. However, that is a situation that the driver can cope with just fine. To avoid confusion, don't output an error when this happens. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Add PHY DLL delay configurationBaolin Wang1-0/+51
Set the PHY DLL delay for each timing mode, which is used to sample the clock accurately and make the clock more stable. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Enable PHY DLL to make clock stableBaolin Wang1-1/+43
For the Spreadtrum SD host controller, when we changed the clock to be more than 52M, we should enable the PHY DLL which is used to track the clock frequency to make the clock work more stable. Otherwise deviation may occur of the higher clock. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Add HS400 enhanced strobe modeBaolin Wang1-0/+32
Add HS400 enhanced strobe mode support for Spreadtrum SD host controller. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-10mmc: sdhci-sprd: Implement the get_max_timeout_count() interfaceBaolin Wang1-0/+7
Implement the get_max_timeout_count() interface to set the Spredtrum SD host controller actual maximum timeout count. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>