summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2014-08-14Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
2014-08-14Merge tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds28-436/+906
Pull MMC updates from Ulf Hansson: "Me and Chris Ball decided to try out using my MMC tree as the primary one, to simplify handling of patches. This pull does thus contains all the MMC patches for 3.17 rc1, no pull from Chris this time. Details: MMC core: - forward compatibility for eMMC - fix some blacklisted cards with broken secure discard MMC host: - mmci: Add support for Qualcomm variant - mmci: Fix regression for arm_variant - sdhci: Various fixes and cleanups - sdhci: Improve external VDD regulator support - sdhci: Support for DDR50 1.8V mode for BayTrail - sdhci-st: Add driver for ST SDHCI controller - sh-mmcif: DMA fixes - omap_hsmmc: Add support for SDIO interrupts - sdhci-pci: Add support for Intel Quark X1000 - dw_mmc: Update the reset sequence - s3cmci: port DMA code to dmaengine API" * tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits) mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed mmc: dw_mmc: Slot quirk "disable-wp" is deprecated. mmc: mmci: Reverse IRQ handling for the arm_variant mmc: mmci: Move all CMD irq handling to mmci_cmd_irq() mmc: mmci: Remove redundant check of status for DATA irq mmc: dw_mmc: change to use recommended reset procedure mmc: sdhci-pxav3: Use devm_* managed helpers mmc: tmio: Configure DMA slave bus width mmc: sh_mmcif: Configure DMA slave bus width mmc: sh_mmcif: Fix DMA slave address configuration mmc: sh_mmcif: Document DT bindings mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback mmc: Do not advertise secure discard if it is blacklisted mmc: sdhci-msm: Get COMPILE_TEST support mmc: sdhci-msm: Remove unnecessary header file inclusion mmc: sdhci-msm: Fix the binding example mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller mmc: sdhci: Preset value not supported in Baytrail eMMC mmc: MMC_USDHI6ROL0 should depend on HAS_DMA mmc: MMC_SH_MMCIF should depend on HAS_DMA ...
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-11mmc: dw_mmc: Slot quirk "disable-wp" is deprecated.Jaehoon Chung1-2/+9
Slot quirks "disable-wp" is deprecated. Instead, use the host quirk "disable-wp". (Because the slot-node is removed in dt-file.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-11mmc: mmci: Reverse IRQ handling for the arm_variantUlf Hansson1-2/+10
Commit "mmc: mmci: Handle CMD irq before DATA irq", caused an issue when using the ARM model of the PL181 and running QEMU. The bug was reported for the following QEMU version: $ qemu-system-arm -version QEMU emulator version 2.0.0 (Debian 2.0.0+dfsg-2ubuntu1.1), Copyright (c) 2003-2008 Fabrice Bellard To resolve the problem, let's restore the old behavior were the DATA irq is handled prior the CMD irq, but only for the arm_variant, which the problem was reported for. Reported-by: John Stultz <john.stultz@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: John Stultz <john.stultz@linaro.org> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-11mmc: mmci: Move all CMD irq handling to mmci_cmd_irq()Ulf Hansson1-10/+12
This patch won't change the behavior of how mmci deals with CMD irqs. By moving code from mmci_irq() to mmci_cmd_irq(), we getter a better overview of what going on. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: John Stultz <john.stultz@linaro.org> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-11mmc: mmci: Remove redundant check of status for DATA irqUlf Hansson1-6/+5
We don't need to verify the content of the status register twice, while we are about to handle a DATA irq. Instead let's leave all verification to be handled by mmci_data_irq(). Cc: Peter Maydell <peter.maydell@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: John Stultz <john.stultz@linaro.org> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-11mmc: dw_mmc: change to use recommended reset procedureSonny Rao2-23/+69
This patch changes the fifo reset code to follow the reset procedure outlined in the documentation of Synopsys Mobile storage host databook. Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> [sonnyrao: fix compile for !CONFIG_MMC_DW_IDMAC case] Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-11mmc: sdhci-pxav3: Use devm_* managed helpersLaurent Pinchart1-10/+3
This simplifies probe error and remove code paths. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-07Merge tag 'mfd-for-linus-3.17' of ↵Linus Torvalds1-6/+127
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD update from Lee Jones: "Changes to existing drivers: - checkpatch fixes throughout the subsystem - use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core - use DMA in rtsx_pcr - restrict building on unsupported architectures on timberdale, cs5535 - SPI hardening in cros_ec_spi - more robust error handing in asic3, cros_ec, ab8500-debugfs, max77686 and pcf50633-core - reorder PM runtime and regulator handing during shutdown in arizona - enable wakeup in cros_ec_spi - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld, tps65912-spi, wm5110-tables and ab8500-debugfs - add regulator handing into suspend() in sec-core - remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel - use cross-architecture friendly data sizes in stmpe-i2c, arizona, max77686 and tps65910 - devicetree documentation updates throughout - provide power management support in max77686 - few OF clean-ups in max77686 - use manged resources in tps6105x New drivers/supported devices: - add support for s2mpu02 to sec-core - add support for Allwinner A32 to sun6i-prcm - add support for Maxim 77802 in max77686 - add support for DA9063 AD in da9063 - new driver for Intel PMICs (generic) and specifically Crystal Cove (Re-)moved drivers == - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb" * tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits) MAINTAINERS: Update MFD repo location mfd: omap-usb-host: Fix improper mask use. mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it mfd: arizona: Add missing handling for ISRC3 under/overclocked mfd: wm5110: Add new interrupt register definitions mfd: arizona: Rename thermal shutdown interrupt mfd: wm5110: Add in the output done interrupts mfd: wm5110: Remove non-existant interrupts mfd: tps65912-spi: Remove unused variable mfd: htc-i2cpld: Remove unused code mfd: da9063: Add support for AD silicon variant mfd: arizona: Map MICVDD from extcon device to the Arizona core mfd: arizona: Add MICVDD to mapped regulators for wm8997 mfd: max77686: Ensure device type IDs are architecture agnostic mfd: max77686: Add Maxim 77802 PMIC support mfd: tps6105x: Use managed resources when allocating memory mfd: wm8997-tables: Suppress 'line over 80 chars' warnings mfd: kempld-core: Correct a variety of checkpatch warnings mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch mfd: si476x-cmd: Remedy checkpatch style complains ...
2014-07-30MIPS: Alchemy: au1xmmc: use clk frameworkManuel Lauss1-10/+21
Use the clock framework to get the peripheral clock rate to correctly set the MMC/SD bus clock divider. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7475/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Alchemy: remove au_read/write/syncManuel Lauss1-81/+86
replace au_read/write/sync with __raw_read/write and wmb. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7465/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Alchemy: introduce helpers to access SYS register block.Manuel Lauss1-1/+1
This patch changes all absolute SYS_XY registers to offsets from the SYS block base, prefixes them with AU1000 to avoid silent failures due to changed addresses, and introduces helper functions to read/write them. No functional changes, comparing assembly of a few select functions shows no differences. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7464/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-26mmc: tmio: Configure DMA slave bus widthLaurent Pinchart1-0/+2
Even though some implementations support 4-bytes data register access, the tmio driver never configures the hardware in such a way and always performs 2-bytes accesses. Hardcode the DMA transfer size to 2 bytes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-26mmc: sh_mmcif: Configure DMA slave bus widthLaurent Pinchart1-2/+5
The data register is 4 bytes wide, hardcode the DMA transfer size to 4 bytes in both directions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-26mmc: sh_mmcif: Fix DMA slave address configurationLaurent Pinchart1-3/+7
Commit e5a233cb647d749de2f188477c9a54b94d90477f ("mmc: sh_mmcif: Factorize DMA channel request and configuration code") incorrectly set the destination address for both slave channels instead of setting the source address for the receive channel. Fix that. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-26mmc: sdhci-pci: remove PCI PM functions in suspend/resume callbackChuanxiao.Dong1-17/+6
It is not required (in fact it even is not recommended) that a PCI driver's suspend() callback save the standard configuration registers of the device, prepare it for waking up the system, or put it into a low-power state. All of these operations can very well be taken care of by the PCI subsystem, without the driver's participation. Thus remove these PCI functions. For the device which has wake up capability, use device_init_wakeup to init the wake up capability so that PCI core will help to enable the wakeup for it. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-26mmc: Do not advertise secure discard if it is blacklistedLukas Czerner2-4/+5
Currently when the device secure discard implementation is blacklisted (MMC_QUIRK_SEC_ERASE_TRIM_BROKEN quirk is set) instead of secure discard we're going to do normal discard, which is wrong. When the secure discard is known to be broken we should just disallow it entirely and not advertise this functionality to the user. Fix it. Also move mmc_fixup_device() in from of mmc_blk_alloc() so we can get quirks set before we attempt to set queue information. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-26mmc: sdhci-msm: Get COMPILE_TEST supportGeorgi Djakov1-1/+1
Increase the build testing coverage. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-26mmc: sdhci-msm: Remove unnecessary header file inclusionGeorgi Djakov1-1/+0
The header <linux/regulator/consumer.h> is unused. Remove it. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-10mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC ControllerMaurice Petallo2-2/+3
This is to enable DDR50 bus speed mode with 1.8V signaling capability for BayTrail ACPI and PCI mode eMMC Controller. Signed-off-by: Maurice Petallo <mauricex.r.petallo@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-10mmc: sdhci: Preset value not supported in Baytrail eMMCMaurice Petallo2-0/+2
"SDHCI_QUIRK2_PRESET_VALUE_BROKEN" quirk is added to prohibit preset value enabling for Baytrail eMMC controller. Signed-off-by: Maurice Petallo <mauricex.r.petallo@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-10mmc: MMC_USDHI6ROL0 should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: drivers/built-in.o: In function `usdhi6_dma_setup': usdhi6rol0.c:(.text+0x5c35fc): undefined reference to `dma_map_sg' drivers/built-in.o: In function `usdhi6_dma_stop_unmap': usdhi6rol0.c:(.text+0x5c3738): undefined reference to `dma_unmap_sg' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-10mmc: MMC_SH_MMCIF should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `sh_mmcif_start_dma_tx': sh_mmcif.c:(.text+0x5a3286): undefined reference to `dma_map_sg' drivers/built-in.o: In function `sh_mmcif_start_dma_rx': sh_mmcif.c:(.text+0x5a33fc): undefined reference to `dma_map_sg' drivers/built-in.o: In function `sh_mmcif_end_cmd': sh_mmcif.c:(.text+0x5a3668): undefined reference to `dma_unmap_sg' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-10mmc: MMC_OMAP_HS should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: drivers/built-in.o: In function `omap_hsmmc_pre_dma_transfer': omap_hsmmc.c:(.text+0x5a0928): undefined reference to `dma_map_sg' drivers/built-in.o: In function `omap_hsmmc_dma_cleanup': omap_hsmmc.c:(.text+0x5a0e8e): undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `omap_hsmmc_dma_callback': omap_hsmmc.c:(.text+0x5a1f58): undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `omap_hsmmc_post_req': omap_hsmmc.c:(.text+0x5a2082): undefined reference to `dma_unmap_sg' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-10mmc: sdhci-st: Intial support for ST SDHCI controllerPeter Griffin3-0/+189
This platform driver adds initial support for the SDHCI host controller found on STMicroelectronics SoCs. It has been tested on STiH41x b2020 platforms currently. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: rtsx: add support for async requestMicky Ching1-6/+127
Add support for non-blocking request, pre_req() runs dma_map_sg() and post_req() runs dma_unmap_sg(). This patch can increase card read/write speed, especially for high speed card and slow speed CPU. Test on intel i3(800MHz - 2.3GHz) performance mode(2.3GHz), SD card clock 208MHz run dd if=/dev/mmcblk0 of=/dev/null bs=64k count=1024 before: 67108864 bytes (67 MB) copied, 0.85427 s, 78.6 MB/s after: 67108864 bytes (67 MB) copied, 0.74799 s, 89.7 MB/s Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mmc: s3cmci: port DMA code to dmaengine APIVasily Khoruzhick3-142/+52
Utilise new s3c24xx-dma dmaengine driver for DMA ops. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: tegra: Do not include asm/gpio.hThierry Reding1-2/+0
This doesn't seem to be used any longer and removing the include fixes 64-bit ARM builds. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: mxs: fix card detection in case of 'broken-cd' flag setRoman Peniaev1-1/+2
In case of reboot my olinuxino imx23 board does not see mmc card any more. mmc_rescan is being called by delayed work in loop, but mxs_mmc_get_cd always returns 0, so we will never pass the card detection check and will not do further card inition. This patch is just an attempt to partially revert the patch a91fe279ae of Sascha Hauer, where it is claimed that upper layer will handle broken card detection using the polling logic and MMC_CAP_NEEDS_POLL capability, but seems it is not true, because upper logic still expects 1 from 'get_cd'. So, here we always return 1 (card present) in case of MMC_CAP_NEEDS_POLL capability set. Signed-off-by: Roman Pen <r.peniaev@gmail.com> CC: Chris Ball <chris@printf.net> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Shawn Guo <shawn.guo@linaro.org> CC: Ulf Hansson <ulf.hansson@linaro.org> CC: linux-mmc@vger.kernel.org CC: linux-kernel@vger.kernel.org Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: s3cmci: Move to clk_prepare_enable/clk_disable_unprepareVasily Khoruzhick1-3/+3
Use clk_prepare_enable/clk_disable_unprepare to make the driver work properly with common clock framework. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: Allow forward compatibility for eMMCRomain Izard1-6/+5
As stated by the eMMC 5.0 specification, a chip should not be rejected only because of the revision stated in the EXT_CSD_REV field of the EXT_CSD register. Remove the control on this value, the control of the CSD_STRUCTURE field should be sufficient to reject future incompatible changes. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sdhci: Replace host->mmc with mmc where possibleMarkus Mayer1-15/+15
After the switch to the MMC core regulator infrastucture, we already have a local "mmc" pointer in various functions. There is no longer a need to access the data structure via host->mmc. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sdhci: avoid double-delay while transitioning to 1.8VRussell King1-3/+0
The MMC core in mmc_set_signal_voltage() already provides for the delay required to switch to 1.8V, so there is no need for drivers to perform this wait themselves. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sdhci-pci: SDIO host controller support for Intel Quark X1000Derek Browne2-0/+13
This patch is to enable SDIO host controller for Intel Quark X1000. Signed-off-by: Derek Browne <Derek.Browne@intel.com> Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sdhci: Remove blank lineUlf Hansson1-1/+0
While merging the sdhci patchset from Russell King, somehow a blank line was left behind. Let's correct the formatting. Cc: Chris Ball <chris@printf.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sdhci: Improve external VDD regulator supportTim Kryger1-7/+9
A standard compliant SDHCI can itself supply VDD at 1.8, 3.0, or 3.3v. Several vendors ignore this and instead rely upon external regulators to supply VDD. While the external regulators typically can supply one of the standard SDHCI voltage levels, there is no real reason for this to be a hard requirement. This patch alters the SDHCI driver such that external VDD regulators that provide voltages other than the three mentioned above may be used so long as they can supply a voltage that meets the needs of the card. In the case that an external VDD regulator is provided, it is reasonable to ignore the voltage capabilities of the host controller and allow the external regulator to set the OCR mask. Additionally, there is no need to convert a VDD voltage request into one of the standard SDHCI voltage levels or program it in the host controller's power control register. Signed-off-by: Tim Kryger <tim.kryger@gmail.com> Tested-by: Sachin Kamat <spk.linux@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: wmt-sdmmc: Remove deprecated IRQF_DISABLEDAxel Lin1-1/+1
It's a NOOP since 2.6.35 and it will be removed one day. This is not trivial because current code uses hard coded 32 instead of IRQF_DISABLED in the request_irq call. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: wmt-sdmmc: Fix settting BM_EIGHTBIT_MODE bit in wmt_mci_set_ios()Axel Lin1-16/+15
For MMC_BUS_WIDTH_8 case, current code missed setting BM_EIGHTBIT_MODE bit. Also has a small refactor to make the code looks better in readability. So the bit settings witch below logic: SDMMC_BUSMODE register: Set EIGHTBIT_MODE bit for 8 bit mode, Set FOURBIT_MODE bit for 4 bit mode. Clear both EIGHTBIT_MODE and FOURBIT_MODE bits for 1 bit mode. SDMMC_EXTCTRL register: Set EXT_EIGHTBIT bit for 8 bit mode, Clear EXT_EIGHTBIT bit for 1/4 bit mode. Add define for EXT_EIGHTBIT to avoid using magic number. BM_ONEBIT_MASK is no longer used, thus remove it. This patch is untested due to lack of platform with 8-bit hardware. However since the code is there, it's good to make the code match the document. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sd: warn if card stays busy during initJohan Rudholm1-0/+3
The initialization of some SD-cards fails because the card never leaves the busy state. Aid trouble shooting by indicating this in the kernel log. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: moxart: Remove unneeded version.h inclusionSachin Kamat1-1/+0
version.h inclusion is not needed as suggested by versioncheck. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335xAndreas Fenkart1-3/+21
The am335x can't detect pending cirq in PM runtime suspend. This patch reconfigures dat1 as a GPIO before going to suspend. SDIO interrupts are detected with the GPIO, the GPIO will only wake the module from suspend, SDIO irq detection will still happen through the IP block. Idea of remuxing the pins by Tony Lindgren. Code contributions from Tony Lindgren and Balaji T K <balajitk@ti.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: omap_hsmmc: switch default/idle pinctrl states in runtime hooksAndreas Fenkart1-6/+10
These are predefined states of the driver model. When not present, as if not set in the device tree, they become no-ops. Explicitly selecting the default state is not needed since the device core layer sets pin mux to "default" state before probe. This is not the simplest implementation, on AM335x at least, we could switch to idle at any point in the suspend hook, only the default state needs to be set before writing to the irq registers or an IRQ might get lost. Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: omap_hsmmc: abort runtime suspend if pending sdio irq detectedAndreas Fenkart1-2/+21
On multicores, an sdio irq handler could be running in parallel to runtime suspend. In the worst case it could be waiting for the spinlock held by the runtime suspend. When runtime suspend is complete and the functional clock (fclk) turned off, the irq handler will continue and cause a SIGBUS on the first register access. Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: omap_hsmmc: enable wakeup event for sdio OMAP4Balaji T K1-1/+13
To detect sdio irqs properly without spurious events, OMAP4 needs IWE in CON and CTPL, CLKEXTFREE in HCTL to be set Tested-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: omap_hsmmc: Extend debugfs by SDIO IRQ handling, runtime stateAndreas Fenkart1-3/+14
Add SDIO IRQ entries to debugfs entry. Note that PSTATE shows current state of data lines, incl. SDIO IRQ pending Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: omap_hsmmc: Enable SDIO interruptAndreas Fenkart1-12/+189
There have been various patches floating around for enabling the SDIO IRQ for hsmmc, but none of them ever got merged. Probably the reason for not merging the SDIO interrupt patches has been the lack of wake-up path for SDIO on some omaps that has also needed remuxing the SDIO DAT1 line to a GPIO making the patches complex. This patch adds the minimal SDIO IRQ support to hsmmc for omaps that do have the wake-up path. For those omaps, the DAT1 line need to have the wake-up enable bit set, and the wake-up interrupt is the same as for the MMC controller. This patch has been tested on am3730 es1.2 with mwifiex connected to MMC3 with mwifiex waking to Ethernet traffic from off-idle mode. Note that for omaps that do not have the SDIO wake-up path, this patch will not work for idle modes and further patches for remuxing DAT1 to GPIO are needed. Based on earlier patches [1][2] by David Vrabel <david.vrabel@csr.com>, Steve Sakoman <steve@sakoman.com> For now, only support SDIO interrupt if we are booted with a separate wake-irq configued via device tree. This is because omaps need the wake-irq for idle states, and some omaps need special quirks. And we don't want to add new legacy mux platform init code callbacks any longer as we are moving to DT based booting anyways. To use it, you need to specify the wake-irq using the interrupts-extended property. [1] http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux.git;a=commitdiff_plain;h=010810d22f6f49ac03da4ba384969432e0320453 [2] http://comments.gmane.org/gmane.linux.kernel.mmc/20446 Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: quirks: Fixup debug messageAlexander Stein1-1/+1
There is no need for an output like this: > mmcblk mmc1:0001: calling add_quirk_mmc+0x0/0x20 Instead use this one: > mmcblk mmc1:0001: calling add_quirk_mmc Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sh-mmcif: final error path cleanupBen Dooks1-4/+2
Remove the error path items that are no longer needed. The mmc card-detect code cleans up after itself (and registers with devm) and the host error is the same as the clock disable. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: sh-mmcif: no need to call pm_runtime_suspend on errorBen Dooks1-4/+2
The pm_runtime call should implicitly disable the device once the probe is over if there is no explicit reference gained. There is no need to call pm_runtime_suspend() before the pm_runtime_disable() call. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 13:20:16 +0000