summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci.c
AgeCommit message (Expand)AuthorFilesLines
2012-12-07mmc: sdhci: implement the .card_event() methodGuennadi Liakhovetski1-21/+27
2012-12-06mmc: eSDHC: Recover from ADMA errorsHaijun Zhang1-0/+2
2012-12-06mmc: sdhci: add quirk for lack of 1.8v supportDaniel Drake1-0/+4
2012-12-06mmc: sdhci: Use regulator min/max voltage range according to specKevin Liu1-10/+8
2012-12-06mmc: sdhci: Balance vmmc regulator_enable(), and always enable vqmmcKevin Liu1-7/+8
2012-11-07mmc: sdhci: fix NULL dereference in sdhci_request() tuningChris Ball1-10/+13
2012-11-07mmc: sdhci: fix IS_ERR() checking of regulator_get()Kevin Liu1-6/+12
2012-11-07mmc: sdhci-of-esdhc: disable CMD23 for some Freescale SoCsJerry Huang1-0/+3
2012-10-07mmc: core: Fixup broken suspend and eMMC4.5 power off notifyUlf Hansson1-9/+0
2012-09-19mmc: sdhci: Test cd-gpio instead of SDHCI presence when probingGuennadi Liakhovetski1-0/+8
2012-09-04mmc: sdhci: vmmc regulator should be explicitly enabled/disabledPhilip Rakity1-2/+5
2012-09-04mmc: sdhci: Add regulator support for vccq (voltage regualor)Philip Rakity1-65/+116
2012-07-22mmc: sd: Fix sd current limit settingAaron Lu1-28/+3
2012-07-22mmc: sdhci: When a UHS switch fails, cycle power if regulator is usedPhilip Rakity1-0/+4
2012-07-22mmc: sdhci: poll for card even when card is logically unremovableDaniel Drake1-1/+1
2012-07-22mmc: sdhci: Introduce new flag SDHCI_USING_RETUNING_TIMERAaron Lu1-18/+12
2012-07-22mmc: sdhci: restore host settings when card is removedAaron Lu1-0/+12
2012-07-22mmc: sdhci: fix incorrect command used in tuningAaron Lu1-1/+7
2012-07-22mmc: sdhci: Report failure reasons for all cases in sdhci_add_host()Mark Brown1-2/+8
2012-07-22mmc: sdhci: Allow caps[1] to be set via SDHCI_QUIRK_MISSING_CAPSPhilip Rakity1-3/+5
2012-07-21mmc: only support voltage (vdd) that regulator agrees withPhilip Rakity1-0/+17
2012-07-21mmc: sdhci: only set 200mA support for 1.8v if 200mA is availablePhilip Rakity1-1/+1
2012-07-21mmc: sdhci: if MAX_CURRENT is 0, try getting current from regulatorPhilip Rakity1-6/+22
2012-06-06mmc: sdhci: Use DBG() instead of pr_warning() on large timeoutChris Ball1-2/+2
2012-04-22mmc: sdhci: Log what timeout was set if the timeout is too largeMark Brown1-2/+2
2012-04-20mmc: sdhci: refine non-removable card checking for card detectionDaniel Drake1-1/+1
2012-04-05mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes.Al Cooper1-2/+3
2012-03-27mmc: sdhci: check interrupt flags in ISR againAlexander Stein1-7/+12
2012-03-27mmc: sdhci: add quirk for keeping card power during suspendAdrian Hunter1-2/+11
2012-03-25mmc: sdhci: Add platform suspend/resume hooks.Chris Ball1-0/+6
2012-01-12mmc: sdhci: restore the enabled dma when do reset allShaohui Xie1-0/+5
2012-01-12mmc: host: Adds support for eMMC 4.5 HS200 modeGirish K S1-15/+42
2012-01-12mmc: sdhci: Deal with failure case in sdhci_suspend_hostAaron Lu1-3/+14
2012-01-12mmc: sd: Fix SDR12 timing regressionAlexander Elbs1-2/+1
2012-01-12mmc: sdhci: Fix tuning timer incorrect setting when suspending hostAaron Lu1-2/+1
2012-01-11mmc: sdhci: Always pass clock request value zero to set_clock host opTodd Poynor1-1/+1
2012-01-11mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTIONAdrian Hunter1-1/+0
2012-01-11mmc: sdhci: prevent card detection activity for non-removable cardsAdrian Hunter1-4/+3
2012-01-11mmc: sdhci: fix vmmc handlingAdrian Hunter1-22/+21
2012-01-11mmc: remove the second argument of k[un]map_atomic()Cong Wang1-2/+2
2012-01-11mmc: debugfs: expose the SDCLK frq in sys iosGiuseppe CAVALLARO1-0/+10
2011-12-19mmc: sdhci: remove "state" argument from sdhci_suspend_hostManuel Lauss1-1/+1
2011-10-26mmc: core: Add Power Off Notify Feature eMMC 4.5Girish K S1-0/+9
2011-10-26mmc: replace printk with appropriate display macroGirish K S1-47/+45
2011-10-26mmc: sdhci-pci: add runtime pm supportAdrian Hunter1-44/+211
2011-10-26mmc: Add module.h to drivers/mmc users assuming implicit presence.Paul Gortmaker1-0/+1
2011-10-26mmc: sdhci: add eMMC hardware reset supportAdrian Hunter1-0/+9
2011-08-13mmc: sdhci: use f_max instead of host->clock for timeoutsAndy Shevchenko1-5/+2
2011-08-13mmc: sdhci: move timeout_clk calculation farther downAndy Shevchenko1-19/+19
2011-08-13mmc: sdhci: check host->clock before using it as a denominatorAndy Shevchenko1-3/+5