summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/rtsx_pci_sdmmc.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-29misc: rtsx: Move Realtek Card Reader Driver to miscRui Feng1-1/+1
Because Realtek card reader drivers are pcie and usb drivers, and they bridge mmc subsystem and memstick subsystem, they are not mfd drivers. Greg and Lee Jones had a discussion about where to put the drivers, the result is that misc is a good place for them, so I move all files to misc. If I don't move them to a right place, I can't add any patch for this driver. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Perry Yuan <perry_yuan@dell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-30mmc: rtsx: fix tuning fail on gen3 PCI-Expressrui_feng1-20/+18
On gen3 PCI-Express we should send command one by one. If sending many commands in one packet will lead to a failure. Signed-off-by: rui_feng <rui_feng@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: use empty initializer list to zero-clear structuresMasahiro Yamada1-1/+1
In the MMC subsystem, we see such initializers that only clears the first member explicitly. For example, struct mmc_request mrq = {NULL}; sets the first member (.sbc) to NULL explicitly. However, this is an unstable form because we may insert a non-pointer member at the top of the struct mmc_request in the future. (if we do so, the compiler will spit warnings.) So, using a designated initializer is preferred coding style. The expression above is equivalent to: struct mmc_request mrq = { .sbc = NULL }; Of course, this does not express our intention. We want to fill all struct members with zeros. Please note struct members are implicitly zero-cleared unless otherwise specified in the initializer. After all, the most reasonable (and stable) form is: struct mmc_request mrq = {}; Do likewise for mmc_command, mmc_data as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: delete is_first_req parameter from pre-request callbackLinus Walleij1-2/+1
The void (*pre_req) callback in the struct mmc_host_ops vtable is passing an argument "is_first_req" indicating whether this is the first request or not. None of the in-kernel users use this parameter: instead, since they all just do variants of dma_map* they use the DMA cookie to indicate whether a pre* callback has already been done for a request when they decide how to handle it. Delete the parameter from the callback and all users, as it is just pointless cruft. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26mmc: rtsx_pci: use new macro for R1 without CRCWolfram Sang1-1/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-29mmc: rtsx_pci: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-10/+2
The workqueue "workq" provides support for sd/mmc async request, which makes next request do dma_map_sg() while previous request transferring data. The workqueue has a single workitem(&host->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in rtsx_pci_sdmmc_drv_remove() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-29mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requestsUlf Hansson1-1/+1
Cc: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Mauro Santos <registo.mailling@gmail.com>
2016-07-29mmc: rtsx_pci: Use the provided busy timeout from the mmc coreUlf Hansson1-1/+1
The rtsx_pci driver is using a fixed 3s timeout for R1B responses, which in some cases isn't suffient. For example, erase/discard requests may require longer timeouts. Instead of always using a fixed timeout, let's use the per request calculated busy timeout from the mmc core. Cc: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Mauro Santos <registo.mailling@gmail.com>
2015-06-01mmc: rtsx: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: rtsx: check sg_count before long data xferMicky Ching1-2/+9
Check sg_count before sending long data xfer. Because dma_map_sg() return int, and sg_count may be negative, so using int instead of unsigned. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: rtsx: finish request if no card existMicky Ching1-2/+7
Return error-code directly if no card exist, this can make card remove faster. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: swap function position to avoid pre declarationMicky Ching1-103/+100
move function sd_read_data()/sd_write_data() behind sd_send_cmd_get_rsp() to avoid pre-declaration. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add support for sdio cardMicky Ching1-96/+138
Modify transfer mode for support sdio card, send cmd and data at the same time for read data transfer, but send data after cmd for write data transfer. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add helper function to simplify codeMicky Ching1-44/+51
To support sdio card, transfer mode need make a change, this need to split code and use it in different place, Add new function to simplify repeat operation. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: init cookie at probe/card_eventMicky Ching1-0/+2
host->cookie is used for handle async request, we should init it to negative value when new card inserted, make cookie value invalid. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add dump_reg_range to simplify dump registerMicky Ching1-17/+21
Add a new function to dump register within a range. We print 1 register a line before this patch, this may make debug info too long when we add more register to dump. The new dump_reg_range() dump to 8 register a line, and it is easy to use. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: rtsx_pci: Set power related cap2 macrosRoger Tseng1-0/+1
Set MMC_CAP2_NO_PRESCAN_POWERUP and MMC_CAP2_FULL_PWR_CYCLE for rtsx_pci_sdmmc and rtsx_usb_sdmmc to reflect properties of Realtek card reader hosts. Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: remove .owner field for drivers using module_platform_driverPeter Griffin1-1/+0
This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: rtsx_pci_sdmmc: fix incorrect last byte in R2 responseRoger Tseng1-0/+7
Current code erroneously fill the last byte of R2 response with an undefined value. In addition, the controller actually 'offloads' the last byte (CRC7, end bit) while receiving R2 response and thus it's impossible to get the actual value. This could cause mmc stack to obtain inconsistent CID from the same card after resume and misidentify it as a different card. Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2. Cc: <stable@vger.kernel.org> # v3.8+ Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver") Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: rtsx: add support for async requestMicky Ching1-6/+127
Add support for non-blocking request, pre_req() runs dma_map_sg() and post_req() runs dma_unmap_sg(). This patch can increase card read/write speed, especially for high speed card and slow speed CPU. Test on intel i3(800MHz - 2.3GHz) performance mode(2.3GHz), SD card clock 208MHz run dd if=/dev/mmcblk0 of=/dev/null bs=64k count=1024 before: 67108864 bytes (67 MB) copied, 0.85427 s, 78.6 MB/s after: 67108864 bytes (67 MB) copied, 0.74799 s, 89.7 MB/s Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-10Merge tag 'mmc-updates-for-3.16-rc1' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.16: Core: - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v - if card init at 3.3v doesn't work, try 1.8v and 1.2v too Drivers: - moxart: New driver for MOXA ART SoCs - rtsx_usb_sdmmc: New driver for Realtek USB card readers - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support - sunxi: New driver for Allwinner sunxi SoCs - usdhi6rol0: New driver for Renesas SD/SDIO controller" * tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits) mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller mmc: sdhci-of-esdhc: Fixup compile error mmc: tegra: fix reporting of base clock frequency mmc: tegra: disable UHS modes mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler MAINTAINERS: mmc: Add path to git tree mmc: dove: fix missing MACH_DOVE dependency mmc: sdhci: SD tuning is broken for some controllers mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support mmc: omap_hsmmc: split omap-dma header file mmc: omap_hsmmc: fix cmd23 multiblock read/write mmc: omap_hsmmc: use devm_ioremap_resource mmc: omap_hsmmc: use devm_request_threaded_irq mmc: omap_hsmmc: use devm_request_irq mmc: omap_hsmmc: use devm_clk_get mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value mmc: omap: Use DIV_ROUND_UP instead of open coded ...
2014-05-08mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"Micky Ching1-350/+68
This reverts commit c42deffd5b53c9e583d83c7964854ede2f12410d. commit <mmc: rtsx: add support for pre_req and post_req> did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-22mmc: rtsx: add R1-no-CRC mmc command type handleMicky Ching1-0/+3
a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced a cmd.flags unhandled in realtek pci host driver. This will make MMC card fail to initialize, this patch is used to handle the new cmd.flags condition and MMC card can be used. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: rtsx: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon1-0/+2
Added MMC_DDR52 as eMMC's DDR mode is distinguished from SD-UHS. CC: Wei WANG <wei_wang@realsil.com.cn> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: add support for pre_req and post_reqMicky Ching1-68/+350
Add support for non-blocking request, pre_req() runs dma_map_sg() and post_req() runs dma_unmap_sg(). This patch can increase card read/write speed, especially for high speed card and slow CPU(for some embedded platform). Users can get a great benefit from this patch. if CPU frequency is 800MHz, SDR104 or DDR50 card read/write speed may increase more than 15%. test results: intel i3(800MHz - 2.3GHz), SD card clock 208MHz performance mode(2.3GHz): Before: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.18191 s, 56.8 MB/s After: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.09276 s, 61.4 MB/s powersave mode(800MHz): Before: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.29569 s, 51.8 MB/s After: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.11218 s, 60.3 MB/s Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: modify phase searching method for tuningMicky Ching1-80/+32
The new phase searching method is more concise and easier to understand. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: fix card poweroff bugMicky Ching1-1/+2
If the host driver removed while card in the slot, the host will not power off card power correctly. This bug is produced because host eject flag set before the last mmc_set_ios callback, we should set the eject flag after power off. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2013-10-30mmc: rtsx: Remove redundant suspend and resume callbacksUlf Hansson1-33/+0
Suspend and resume of cards are handled by the protocol layer and consequently the mmc_suspend|resume_host APIs are marked as deprecated. While moving away from using the deprecated APIs, there are nothing left to be done for the suspend and resume callbacks, so remove them. Cc: Wei WANG <wei_wang@realsil.com.cn> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: core: clean up duplicate macrosJackey Shen1-1/+1
Clean up the duplicate macros: mmc_sd_card_uhs -> mmc_card_uhs mmc_sd_card_set_uhs -> mmc_card_set_uhs Signed-off-by: Jackey Shen <jackey.shen@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-30mmc: memstick: rtsx: Modify copyright commentsWei WANG1-2/+1
Update copyright date, and remove author address. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage failWei WANG1-1/+8
If switching voltage fails, SD_CLK toggle enable bit should been cleared so that SD host can control SD clock automatically. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30mfd: mmc: rtsx: Change default tx phaseWei WANG1-16/+42
The default phase can meet most cards' requirement, but it is not the optimal one. In some extreme situation, the rx phase point produced by the following tuning process will drift quite a distance. Before tuning UHS card, this patch will set a more proper initial tx phase point, which is calculated from statistic data, and can achieve a much better tx signal quality. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-26mmc: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22mmc: rtsx_pci_sdmmc: Don't execute power up sequence repeatedlyWei WANG1-0/+10
For some Realtek card readers, the power up sequence can only be executed when power has been turned off fully. So the rtsx host should not start power up sequence again when set_ios been called if the power has been turned on. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-26Merge tag 'mmc-updates-for-3.9-rc1' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.9: Core: - Support for packed commands in eMMC 4.5. (This requires a host capability to be turned on. It increases write throughput by 20%+, but may also increase average write latency; more testing needed.) - Add DT bindings for capability flags. - Add mmc_of_parse() for shared DT parsing between drivers. Drivers: - android-goldfish: New MMC driver for the Android Goldfish emulator. - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection. - omap_hsmmc: Fix boot hangs with RPMB partitions. - sdhci-bcm2835: New driver for controller used by Raspberry Pi. - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio. - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs. - tmio_mmc: Add DT bindings, support for vccq regulator" * tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits) mmc: tegra: assume CONFIG_OF, remove platform data mmc: add DT bindings for more MMC capability flags mmc: tmio: add support for the VccQ regulator mmc: tmio: remove unused and deprecated symbols mmc: sh_mobile_sdhi: use managed resource allocations mmc: sh_mobile_sdhi: remove unused .pdata field mmc: tmio-mmc: parse device-tree bindings mmc: tmio-mmc: define device-tree bindings mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings mmc: (cosmetic) remove "extern" from function declarations mmc: provide a standard MMC device-tree binding parser centrally mmc: detailed definition of CD and WP MMC line polarities in DT mmc: sdhi, tmio: only check flags in tmio-mmc driver proper mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch() mmc: sdhci: check voltage range only on regulators aware of voltage value mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK mmc: support packed write command for eMMC4.5 devices mmc: add packed command feature of eMMC4.5 mmc: rtsx: remove driving adjustment mmc: use regulator_can_change_voltage() instead of regulator_count_voltages ...
2013-02-24mmc: rtsx: remove driving adjustmentRoger Tseng1-5/+0
Several new models of readers use different way to select driving capability (a necessary adjustment along with voltage change). Removing this from device-independent rtsx_pci_sdmmc module. It will be implemented in device-depend calls encapsulated by rtsx_pci_switch_output_voltage(). Signed-off-by: Roger Tseng <rogerable@realtek.com> Reviewed-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-14mfd: rtsx: Fix issue that booting OS with SD card insertedWei WANG1-0/+18
Realtek card reader supports both SD and MS card. According to the settings of rtsx MFD driver, SD host will be probed before MS host. If we boot/reboot Linux with SD card inserted, the resetting flow of SD card will succeed, and the following resetting flow of MS is sure to fail. Then MS upper-level driver will ask rtsx driver to turn power off. This request leads to the result that the following SD commands fail and SD card can't be accessed again. In this commit, Realtek's SD and MS host driver will check whether the card that upper driver requesting is the one existing in the slot. If not, Realtek's host driver will refuse the operation to make sure the exlusive accessing at the same time. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-27mmc: rtsx: Call MFD hook to switch output voltageWei WANG1-25/+5
Different card reader has different method to switch output voltage, so we have to use the callback function provided by MFD driver to switch output pad voltage. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mmc: rtsx: Explicitely include slab.h in rtsx_pci_sdmmc.cWei WANG1-0/+1
This fixes the following build error on some architectures (parisc at least): drivers/mmc/host/rtsx_pci_sdmmc.c: In function 'sd_normal_rw': drivers/mmc/host/rtsx_pci_sdmmc.c:448:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] drivers/mmc/host/rtsx_pci_sdmmc.c:448:6: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/mmc/host/rtsx_pci_sdmmc.c:472:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21mmc: rtsx: Configure SD_CFG2 register in sd_rw_multiWei WANG1-0/+1
For Realtek card reader, internal regsiter SD_CFG2 should be configured before transferring data. The default value of SD_CFG2 is proper for writing data. But for reading sequence, the timing is not good enough. So in some extreme circumstance, card reader may sample the response data from the card as good even if the data is wrong. And this will cause the bad consequence. In the prior version, the value of this register has been calculated, but forgotten to write back to the internal register. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mmc: rtsx: Remove a duplicate command in sd_rw_multiWei WANG1-2/+0
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-08mmc: Add realtek pcie sdmmc host driverWei WANG1-0/+1348
Realtek PCI-E SD/MMC card host driver is used to access SD/MMC card, with the help of Realtek PCI-E card reader MFD driver. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 19:36:15 +0000