summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/mmci.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-12mmc: mmci: Fix typo in commentXiang wangx1-1/+1
Delete the redundant word 'is'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220608130847.46359-1-wangxiang@cdjrlc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-05-04mmc: mmci: Remove custom ios handlerLinus Walleij1-4/+0
The custom boardfile ios handler isn't used anywhere in the kernel. Delete it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220427125557.1608825-1-linus.walleij@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: mmci: Break IRQ status loop when all zeroLinus Walleij1-0/+2
We iterate an extra time through the IRQ status handling loop despite nothing had fired. Enabling the debug prints: mmci-pl18x 80005000.mmc: op 01 arg 00000000 flags 000000e1 mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000001 mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000000 mmci-pl18x 80005000.mmc: op 01 arg 40ff8080 flags 000000e1 mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000001 mmci-pl18x 80005000.mmc: irq0 (data+cmd) 00000000 It is pointless to loop through the function when status is zero. Just break the loop if the status is zero. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220416224549.627623-1-linus.walleij@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: mmci: increase stm32 sdmmcv2 clock max freqYann Gautier1-1/+1
The variant->f_max is dependent on the IP, not on the SoC where it is embedded. Set the max frequency of its source clock to 267MHz. The frequency used will be limited by the IOs max frequency, set in the SoC device tree. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211215141727.4901-3-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: mmci: Add support for sdmmc variant revision v2.2Yann Gautier1-0/+5
The change is only hardware, and does not need driver change: Added hardware flow control during transmit packet with variable delay. The new id is then added to the ids list structure. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211215141727.4901-2-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12mmc: mmci: Add small comment about reset threadLinus Walleij1-0/+4
Put a small comment before assigning IRQ_WAKE_THREAD telling us what is going on. Cc: Russell King <linux@armlinux.org.uk> Cc: Yann Gautier <yann.gautier@foss.st.com> Cc: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921143359.1738149-1-linus.walleij@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: mmci: De-assert reset on probeLinus Walleij1-0/+3
If we find a reset handle when probing the MMCI block, make sure the reset is de-asserted. It could happen that a hardware has reset asserted at boot. Cc: Russell King <linux@armlinux.org.uk> Cc: Yann Gautier <yann.gautier@foss.st.com> Cc: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20210630102408.3543024-1-linus.walleij@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-09mmc: mmci: Add MMC_CAP_NEED_RSP_BUSY for the stm32 variantsYann Gautier1-1/+9
An issue has been observed on STM32MP157C-EV1 board, with an erase command with secure erase argument, ending up waiting for ~4 hours before timeout. The requested busy timeout from the mmc core ends up with 14784000ms (~4 hours), but the supported host->max_busy_timeout is 86767ms, which leads to that the core switch to use an R1 response in favor of the R1B and polls for busy with the host->card_busy() ops. In this case the polling doesn't work as expected, as we never detects that the card stops signaling busy, which leads to the following message: mmc1: Card stuck being busy! __mmc_poll_for_busy The problem boils done to that the stm32 variants can't use R1 responses in favor of R1B responses, as it leads to an internal state machine in the controller to get stuck. To continue to process requests, it would need to be reset. To fix this problem, let's set MMC_CAP_NEED_RSP_BUSY for the stm32 variant, which prevent the mmc core from switching to R1 responses. Additionally, let's cap the cmd->busy_timeout to the host->max_busy_timeout, thus rely on 86767ms to be sufficient (~66 seconds was need for this test case). Fixes: 94fe2580a2f3 ("mmc: core: Enable erase/discard/trim support for all mmc hosts") Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20210225145454.12780-1-yann.gautier@foss.st.com Cc: stable@vger.kernel.org [Ulf: Simplified the code and extended the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-3/+1
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-02amba: Make the remove callback return voidUwe Kleine-König1-3/+1
All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2021-02-01mmc: mmci: Add support for probing bus voltage level translatorMarek Vasut1-5/+65
Add support for testing whether bus voltage level translator is present and operational. This is useful on systems where the bus voltage level translator is optional, as the translator can be auto-detected by the driver and the feedback clock functionality can be disabled if it is not present. This requires additional pinmux state, "init", where the CMD, CK, CKIN lines are not configured, so they can be claimed as GPIOs early on in probe(). The translator test sets CMD high to avoid interfering with a card, and then verifies whether signal set on CK is detected on CKIN. If the signal is detected, translator is present, otherwise the CKIN feedback clock are disabled. Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Ludovic Barre <ludovic.barre@st.com> Tested-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210124170258.32862-2-marex@denx.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: mmci: add sdio datactrl mask for sdmmc revisionsLudovic Barre1-0/+2
This patch adds datactrl_mask_sdio for sdmmc revisions. sdmmc revisions used same bit of previous ST variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200611132839.4515-1-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28mmc: mmci: Switch to mmc_regulator_set_vqmmc()Marek Vasut1-22/+8
Instead of reimplementing the logic in mmc_regulator_set_vqmmc(), use the mmc code function directly. This also allows us to fix a related issue on STM32MP1, when a voltage switch of 1.8V is done for the eMMC, but the current level is already set to 1.8V. More precisely, in this scenario the call to the ->post_sig_volt_switch() hangs, indefinitely waiting for the voltage switch to complete. Fix this problem by checking if mmc_regulator_set_vqmmc() returned 1 and then skip invoking the callback. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20200416163649.336967-3-marex@denx.de [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: mmci: Add support for sdmmc variant revision 2.0Ludovic Barre1-0/+31
This patch adds a sdmmc variant revision 2.0. This revision is backward compatible with 1.1, but adds DMA linked list support. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200128090636.13689-10-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: mmci: Add callbacks for to manage signal voltage switchLudovic Barre1-0/+8
A variant may need to define some actions before and after a voltage switch. This patch adds 2 callbacks to manage signal voltage switch in the struct mmci_host_ops. ->pre_sig_volt_switch() allows to prepare a signal voltage switch before sending the SD_SWITCH_VOLTAGE command (CMD11). ->post_sig_volt_switch callback allows specific actions to be executed, after the I/O signal voltage level has been changed. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200128090636.13689-8-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: mmci: Add a reference at mmc_host_ops in mmci structLudovic Barre1-2/+2
The variant init function may need to add a mmc_host_ops, for example to add the execute_tuning support if this feature is available. This patch adds mmc_host_ops pointer in mmci struct. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200128090636.13689-4-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: mmci: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi1-4/+14
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217112737.31024-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: mmci: Support any block sizes for ux500v2 and qcom variantLinus Walleij1-4/+30
For the ux500v2 variant of the PL18x block, any block sizes are supported. This is necessary to support some SDIO transfers. This also affects the QCOM MMCI variant and the ST micro variant. For Ux500 an additional quirk only allowing DMA on blocks that are a power of two is needed. This might be a bug in the DMA engine (DMA40) or the MMCI or in the interconnect, but the most likely is the MMCI, as transfers of these sizes work fine for other devices using the same DMA engine. DMA works fine also with SDIO as long as the blocksize is a power of 2. This patch has proven necessary for enabling SDIO for WLAN on PostmarketOS-based Ux500 platforms. What we managed to test in practice is Broadcom WiFi over SDIO on the Ux500 based Samsung GT-I8190 and GT-S7710. This WiFi chip, BCM4334 works fine after the patch. Before this patch: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4334-sdio for chip BCM4334/3 mmci-pl18x 80118000.sdi1_per2: unsupported block size (60 bytes) brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed brcmfmac: brcmf_sdio_download_code_file: error -22 on writing 434236 membytes at 0x00000000 brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed After this patch: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4334/3 wl0: Nov 21 2012 00:21:28 version 6.10.58.813 (B2) FWID 01-0 Bringing up networks, discovering networks with "iw dev wlan0 scan" and connecting works fine from this point. This patch is inspired by Ulf Hansson's patch http://www.spinics.net/lists/linux-mmc/msg12160.html As the DMA engines on these platforms may now get block sizes they were not used to before, make sure to also respect if the DMA engine says "no" to a transfer. Make a drive-by fix for datactrl_blocksz, misspelled. Cc: Ludovic Barre <ludovic.barre@st.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Niklas Cassel <niklas.cassel@linaro.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191217143952.2885-1-linus.walleij@linaro.org
2019-12-18mmc: mmci: add threaded irq to abort DPSM of non-functional stateLudovic Barre1-6/+40
The stm32_sdmmc variant has build-in support for datatimeout for R1B requests. If a corresponding IRQ is raised, this triggers the DPSM to stay busy and remains in a non-functional state. Only a reset can bring it back to a functional state. Because a reset must be issued from non-atomic context, let's defer this to be managed from a threaded IRQ handler. Besides the reset, the threaded handler also calls mmc_request_done(), to finally complete the request. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20191211133934.16932-1-ludovic.Barre@st.com [Ulf: A few minor updates to the changelog/comments] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: core: Remove mmc_gpiod_request_*(invert_gpio)Michał Mirosław1-2/+2
Now that invert_gpio arguments are unused, let's remove them. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/64d766d1f8af2e22bce32f4ffa453f7234207ad6.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: mmci: Convert to pinctrl_select_default_state()Ulf Hansson1-10/+2
Let's drop the boilerplate code for managing the default pinctrl state and convert into using the new pinctrl_select_default_state(). Additionally, move away from using pinctrl_pm_select_default_state() as it's scheduled for removal and use pinctrl_select_default_state() instead. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191206170821.29711-4-ulf.hansson@linaro.org
2019-11-13mmc: mmci: sdmmc: add busy_complete callbackLudovic Barre1-0/+4
This patch adds a specific busy_complete callback for sdmmc variant. sdmmc has 2 status flags: -busyd0: This is a hardware status flag (inverted value of d0 line). it does not generate an interrupt. -busyd0end: This indicates only end of busy following a CMD response. On busy to Not busy changes, an interrupt is generated (if unmask) and BUSYD0END status flag is set. Status flag is cleared by writing corresponding interrupt clear bit in MMCICLEAR. The legacy busy completion has no dedicated interrupt for the end of busy, so it's must monitor step by step the busy progression. On sdmmc variant, this procedure is not needed, it's just need to wait the busyd0end interrupt. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: add busy_complete callbackLudovic Barre1-62/+72
This patch adds busy_completion callback at mmci_host_ops to allow to define a specific busy completion by variant. The legacy code corresponding to busy completion used by ux500 variants is moved to ux500_busy_complete function. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: add hardware busy timeout featureLudovic Barre1-5/+37
In the stm32_sdmmc variant, the datatimer is active not only during data transfers with the DPSM, but also while waiting for the busyend IRQs from commands having the MMC_RSP_BUSY flag set. This leads to an incorrect IRQ being raised to signal MCI_DATATIMEOUT error, which simply breaks the behaviour. Address this by updating the datatimer value before sending a command having the MMC_RSP_BUSY flag set. To inform the mmc core about the maximum supported busy timeout, which also depends on the current clock rate, set ->max_busy_timeout (in ms). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: make unexported functions staticBen Dooks1-10/+10
Fix the following sparse warnings by making any functions not used outsde the mmci.c driver static. drivers/mmc/host/mmci.c:422:6: warning: symbol 'mmci_dma_release' was not declared. Should it be static? drivers/mmc/host/mmci.c:430:6: warning: symbol 'mmci_dma_setup' was not declared. Should it be static? drivers/mmc/host/mmci.c:465:5: warning: symbol 'mmci_prep_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:481:6: warning: symbol 'mmci_unprep_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:490:6: warning: symbol 'mmci_get_next_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:498:5: warning: symbol 'mmci_dma_start' was not declared. Should it be static? drivers/mmc/host/mmci.c:533:6: warning: symbol 'mmci_dma_finalize' was not declared. Should it be static? drivers/mmc/host/mmci.c:542:6: warning: symbol 'mmci_dma_error' was not declared. Should it be static? drivers/mmc/host/mmci.c:951:6: warning: symbol 'mmci_variant_init' was not declared. Should it be static? drivers/mmc/host/mmci.c:956:6: warning: symbol 'ux500v2_variant_init' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11mmc: mmci: Clarify comments and some code for busy detectionUlf Hansson1-32/+37
The code dealing with busy detection is somewhat complicated. In a way to make it a bit clearer, let's try to clarify the comments in the code about it. Additionally, move the part for clearing the so called busy start IRQ, to the place where the IRQ is actually delivered. Ideally, this should make the code a bit more robust. Finally, to improve understanding of the code and the sequence of the busy detection, move the corresponding code around a bit in mmci_cmd_irq(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Jean Nicolas GRAUX <jean-nicolas.graux@st.com> Reviewed-by: Jean Nicolas GRAUX <jean-nicolas.graux@st.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06mmc: mmci: Prevent polling for busy detection in IRQ contextLudovic Barre1-2/+3
The IRQ handler, mmci_irq(), loops until all status bits have been cleared. However, the status bit signaling busy in variant->busy_detect_flag, may be set even if busy detection isn't monitored for the current request. This may be the case for the CMD11 when switching the I/O voltage, which leads to that mmci_irq() busy loops in IRQ context. Fix this problem, by clearing the status bit for busy, before continuing to validate the condition for the loop. This is safe, because the busy status detection has already been taken care of by mmci_cmd_irq(). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06mmc: mmci: Cleanup mmci_cmd_irq() for busy detectLudovic Barre1-4/+4
Let's cleanup the mmci_cmd_irq() a bit, to make the busy detect code more clear. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: mmci: replace blksz_datactrlXX by get_datactrl_cfg callbackLudovic Barre1-24/+2
This patch allows to get datactrl configuration specific at variant. This introduce more flexibility on datactlr value. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: mmci: define get_dctrl_cfg for legacy variantLudovic Barre1-6/+24
This patch defines get_dctrl_cfg callback for legacy variants whatever DMA_ENGINE configuration. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> [Ulf: Fixed a build error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: mmci: Make mmci_variant_init() staticUlf Hansson1-1/+1
As mmci_variant_init() is a local function to mmci.c, let's convert it into static. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-15mmc: mmci: Share sdmmc_variant_init() via the common header fileUlf Hansson1-6/+0
It's good practice to share functions via header files, rather than from the c-files. Therefore, let's move sdmmc_variant_init() to mmci.h. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ludovic Barre <ludovic.barre@st.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-15mmc: mmci: Drop qcom specific header fileUlf Hansson1-1/+0
It seems a bit silly to have a header file to share only the qcom_variant_init() function. So, let's just drop it and move the declaration of the function into the common mmci.h instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-15mmc: mmci: Re-work code starting DMA for the qcom variantUlf Hansson1-4/+0
Having mmci_dmae_start() to invoke the shared function, dml_start_xfer(), explicitly for the qcom variant isn't very nice. Let's clean up this code by moving the qcom specific parts into the qcom ->dma_start() callback and then drop dml_start_xfer() altogether. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-25mmc: mmci: Send a CMD12 to clear the DPSM at errorsUlf Hansson1-2/+23
The current approach with sending a CMD12 (STOP_TRANSMISSION) to complete a data transfer request, either because of using the open-ended transmission type or because of receiving an error during a pre-defined data transfer, isn't sufficient for the STM32 sdmmc variant. More precisely, this variant needs to clear the DPSM ("Data Path State Machine") by sending a CMD12, for all failing ADTC commands. Support this, by adding a struct mmc_command inside the struct mmci_host and initialize it to a CMD12 during ->probe(). Let's also add checks for the new conditions, to enable mmci_data_irq() and mmci_cmd_irq() to postpone the calls to mmci_request_end(), but instead send the CMD12. Cc: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Barre <ludovic.barre@st.com>
2019-02-25mmc: slot-gpio: Remove override_active_level on WPLinus Walleij1-1/+1
The argument "override_active_level" made it possible to enforce a specific polarity on the write-protect GPIO line. All callers in the kernel pass "false" to this call after I have converted all drivers to use GPIO machine descriptors, so remove the argument and clean out this. This kind of polarity inversion should be handled by the GPIO descriptor inside the GPIO library if needed. This rids us of one instance of the kludgy calls into the gpiod_get_raw_value() API. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: mmci: add variant property to set command stop bitLudovic Barre1-0/+6
On cmd12 (STOP_TRANSMISSION), STM32 sdmmc variant needs to set cmdstop bit in command register. The CPSM ("Command Path State Machine") treats the command as a Stop Transmission command and signals abort to the DPSM ("Data Path State Machine"). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: mmci: send stop command if sbc error issueLudovic Barre1-3/+2
Refer to "4.15 set block count command" of sd specification: Host needs to issue CMD12 if any error is detected in the CMD18 and CMD25 operations. In sbc case, the data->stop is fill by framework. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add stm32 sdmmc variantLudovic Barre1-0/+36
This patch adds a stm32 sdmmc variant, rev 1.1. Introduces a new Manufacturer id "0x53, ascii 'S' to define new stm32 sdmmc family with clean range of amba revision/configurations bits (corresponding to sdmmc_ver register with major/minor fields). Add 2 variants properties: -dma_lli, to enable link list support. -stm32_idmabsize_mask, defines the range of SDMMC_IDMABSIZER register which specify the number bytes per buffer. DT properties for sdmmc: -Indicate signal directions (only one property for d0dir, d123dir, cmd_dir) -Select command and data phase relation. -Select "clock in" from an external driver. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add clock divider for stm32 sdmmcLudovic Barre1-0/+2
The STM32 sdmmc variant has a different clock divider. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add optional reset propertyLudovic Barre1-0/+7
This patch adds a optional reset management. STM32 sdmmc variant needs to reset hardware block during the power cycle procedure (for re-initialization). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant property to not read datacntLudovic Barre1-2/+6
This patch adds a boolean property to not read datacnt register. Needed to support the STM32 sdmmc variant. MMCIDATACNT register should be read only after the data transfer is completed. When reading after an error event the read data count value may be different from the real number of data bytes transferred. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant property to write datactrl before commandLudovic Barre1-2/+4
This patch adds a boolean property to allow to write datactrl before to send command, whatever the command type (read or write). Needed to support the STM32 sdmmc variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant property to define irq pio maskLudovic Barre1-2/+11
This patch allows to define specific pio mask for variants. Needed to support the STM32 sdmmc variant which has some bits with different meaning (bits: 21,20,13,12,9) Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant property to define dpsm bitLudovic Barre1-3/+12
This patch adds datactrl variant property to define dpsm enable bit. Needed to support the STM32 variant (STM32 has no dpsm enable bit). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant properties to define cpsm & cmdresp bitsLudovic Barre1-4/+43
This patch adds command variant properties to define cpsm enable bit and responses. Needed to support the STM32 variant (shift of cpsm bit, specific definition of commands response). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: expand startbiterr to irqmask and error checkLudovic Barre1-11/+16
All variants don't pretend to have a startbiterr. -While data error check, if status register return an error (like MCI_DATACRCFAIL) we must avoid to check MCI_STARTBITERR (if not desired). -expand start_err to MCI_IRQENABLE to avoid to set this bit by default. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add datactrl block size variant propertyLudovic Barre1-2/+11
This patch allows to define a datactrl block size by variant, requested by STM32 sdmmc variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add set_clk/pwrreg callbacksLudovic Barre1-4/+12
This patch adds set_clkreg and set_pwrreg callbacks at mmci_host_ops to allow to call specific variant. extends visibility of mmci_write_clk/pwrreg functions to be used into specific file variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 05:30:50 +0000