summaryrefslogtreecommitdiffstats
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2018-04-02Merge tag 'arch-removal' of ↵Linus Torvalds2-123/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-04-02Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm-qspi', ↵Mark Brown1-4/+25
'spi/topic/bcm2835aux', 'spi/topic/dw' and 'spi/topic/gpio' into spi-next
2018-03-28Merge branch 'fixes' into nextMichael Ellerman1-0/+27
Merge our fixes branch from the 4.16 cycle. There were a number of important fixes merged, in particular some Power9 workarounds that we want in next for testing purposes. There's also been some conflicting changes in the CPU features code which are best merged and tested before going upstream.
2018-03-28Merge 4.16-rc7 into char-misc-nextGreg Kroah-Hartman1-0/+27
We want the hyperv fix in here for merging and testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-27GenWQE: Fix a typo in two commentsMarkus Elfring1-2/+2
Add a missing character in two words of these descriptions. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-26misc: Remove Blackfin DSP echo supportAaron Wu2-123/+0
Remove Blackfin DSP echo support Signed-off-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-23eeprom: at24: use SPDX identifier instead of GPL boiler-plateBartosz Golaszewski1-5/+2
Replace the GPL (or later) header with the SPDX identifier for GPL-2.0+. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: simplify the i2c functionality checkingBartosz Golaszewski1-5/+7
Save one call and make code prettier by checking the i2c functionality in the beginning of at24_probe(), saving the relevant values and reusing them later. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: fix a line breakBartosz Golaszewski1-2/+2
Align the broken line with the opening parenthesis to stay consistent with the rest of the driver code. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: tweak newlinesBartosz Golaszewski1-1/+1
Remove the newline between the nvmem registration and its return value check. This is consistent with the rest of the driver code. Add a missing newline between two pdata checks to stay consistent with all the others. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: refactor at24_probe()Bartosz Golaszewski1-16/+18
The code in at24_probe() is pretty mangled. It can be cleaned up a bit by doing things one by one. Let's group the code by logic: parse and verify pdata, initialize the regmap, allocate and fill the fields of at24_data, allocate dummy i2c devices, initialize pm & register with nvmem. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: remove at24_platform_data from at24_dataBartosz Golaszewski1-9/+13
Not all fields from at24_platform_data are needed in at24_data. Let's keep just the ones we need and not carry the whole platform_data structure all the time. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: move platform data processing into a separate routineBartosz Golaszewski1-30/+40
This driver can receive its device data from different sources depending on the system. Move the entire code processing platform data, device tree and acpi into a separate function. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: switch to using probe_new() from the i2c frameworkBartosz Golaszewski1-2/+5
Use the new probe() style for i2c drivers. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: provide and use at24_base_client_dev()Bartosz Golaszewski1-2/+7
Use a helper function for accessing the device struct of the base i2c client. This routine is named in a way that reflects its purpose unlike the previously hand-coded dereferencing. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: readability tweak in at24_probe()Bartosz Golaszewski1-2/+3
Use a helper variable for the size we want to allocate with devm_kzalloc() and save an ugly line break. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: use a helper variable for devBartosz Golaszewski1-25/+23
We use the &client->dev construct all over in at24_probe(). Use a helper variable which is more readable and allows to avoid a couple unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: rename chip to pdata in at24_probe()Bartosz Golaszewski1-21/+21
Reflect the purpose of this variable: it contains platform data so name it such. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: rename at24_get_pdata()Bartosz Golaszewski1-2/+3
As preparation for at24_probe() refactoring: rename at24_get_pdata() to at24_properties_to_pdata(). We're doing it because we'll move the pdata parsing code into a separate function which will be called at24_get_pdata(). Current routine with that name actually parses the device properties so change its name to reflect its purpose. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: don't check if byte_len is a power of 2Bartosz Golaszewski1-3/+0
We support certain models the size of which is not a power of 2. This is not a reason to emit a warning. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: make struct initialization uniform in at24_probe()Bartosz Golaszewski1-1/+1
When zeroing structs, use "{ }" everywhere. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: drop redundant variable in at24_write()Bartosz Golaszewski1-8/+6
We can reuse ret instead of defining a loop-local status variable. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: drop redundant variable in at24_read()Bartosz Golaszewski1-8/+6
We can reuse ret instead of defining a loop-local status variable. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: remove code separatorsBartosz Golaszewski1-4/+0
These are just two left-overs from times when this driver was bigger. They are not really useful anymore. Remove them. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: arrange local variablesBartosz Golaszewski1-10/+16
Arrange declarations of local variables by line length as visually it's easier to read. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: remove nvmem_config from at24_dataBartosz Golaszewski1-16/+16
This structure only needs to exist during the call to nvmem_register(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at24: disable regmap lockingBartosz Golaszewski1-0/+1
We use our own mutex for locking. Disable the regmap-specific locking. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-23eeprom: at25: sizeof t should be sizeof(t)Devang Panchal1-1/+1
Resolved checkpatch warning "sizeof t should be sizeof(t)" issue found by checkpatch. Signed-off-by: Devang Panchal <devang.panchal@softnautics.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15misc: aspeed-lpc-ctrl: Enable FWH and A2H bridge cyclesJoel Stanley1-2/+16
To date this driver has relied on prevous state from out of tree hacks and vendor u-boot trees in order to have the host be able to access data over the LPC bus. Now we explicitly enable the AHB to LPC bridge and FWH cycles from when the user first configures the address to map. We chose to do this then as before that time there is no way for the kernel to know where it is safe to point the LPC window. Tested-by: Lei YU <mine260309@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15misc: aspeed-lpc: Request and enable LPC clockJoel Stanley1-3/+23
The LPC device needs to ensure it's clock is enabled before it can do anything. In the past the clock was enabled and left running by u-boot, however Linux now has an upstream clock driver that disables unused clocks. Tested-by: Lei YU <mine260309@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15misc: ocxl: use put_device() instead of device_unregister()Arvind Yadav1-1/+1
if device_register() returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15misc: mic: Release reference count and memory for VOP deviceArvind Yadav1-2/+4
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Release allocated memory for vop device in vop_release_dev(). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15misc: rtsx: make various functions staticColin Ian King1-6/+6
The functions rts5260_get_ocpstat, rts5260_get_ocpstat2, rts5260_clear_ocpstat, rts5260_process_ocp, rts5260_init_hw and rts5260_set_aspm are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'rts5260_get_ocpstat' was not declared. Should it be static? symbol 'rts5260_get_ocpstat2' was not declared. Should it be static? symbol 'rts5260_clear_ocpstat' was not declared. Should it be static? symbol 'rts5260_process_ocp' was not declared. Should it be static? symbol 'rts5260_init_hw' was not declared. Should it be static? symbol 'rts5260_set_aspm' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15misc: atmel: Remove CPU_AT32AP700X (AVR32) referenceUlf Magnusson1-1/+0
The CPU_AT32AP700X symbol symbol went away when when AVR32 was removed in commit 26202873bb51 ("avr32: remove support for AVR32 architecture") Remove the prompt from ATMEL_TCB_CLKSRC_BLOCK. The prompt condition could never be satisfied now. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14mei: remove dev_err message on an unsupported ioctlColin Ian King1-1/+0
Currently the driver spams the kernel log on unsupported ioctls which is unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway. I suspect this was originally for debugging purposes but it really is not required so remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14mei: limit the number of queued writesAlexander Usyskin6-35/+145
Limit the number of queued writes per client. Writes above this threshold are blocked till place in the transmit queue is available. The limit is configurable via sysfs and defaults to 50. The implementation should provide blocking I/O behavior. Prior to this change one would end up in the hands of OOM. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14mei: make module referencing local to the bus.cTomas Winkler3-39/+34
Module reference counting is relevant only to the mei client devices. Make the implementation clean and move it to bus.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14cxl: Fix timebase synchronization status on P9Christophe Lombard2-17/+12
The PSL Timebase register is updated by the PSL to maintain the timebase. On P9, the Timebase value is only provided by the CAPP as received the last time a timebase request was performed. The timebase requests are initiated through the adapter configuration or application registers. The specific sysfs entry "/sys/class/cxl/cardxx/psl_timebase_synced" is now dynamically updated according the content of the PSL Timebase register. Fixes: f24be42aab37 ("cxl: Add psl9 specific code") Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13cxl: read PHB indications from the device treePhilippe Bergheaud3-7/+45
Configure the P9 XSL_DSNCTL register with PHB indications found in the device tree, or else use legacy hard-coded values. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13cxl: Check if PSL data-cache is available before issue flush requestVaibhav Jain3-7/+27
PSL9D doesn't have a data-cache that needs to be flushed before resetting the card. However when cxl tries to flush data-cache on such a card, it times-out as PSL_Control register never indicates flush operation complete due to missing data-cache. This is usually indicated in the kernel logs with this message: "WARNING: cache flush timed out" To fix this the patch checks PSL_Debug register CDC-Field(BIT:27) which indicates the absence of a data-cache and sets a flag 'no_data_cache' in 'struct cxl_native' to indicate this. When cxl_data_cache_flush() is called it checks the flag and if set bails out early without requesting a data-cache flush operation to the PSL. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13cxl: Remove function write_timebase_ctrl_psl9() for PSL9Vaibhav Jain1-8/+2
For PSL9 the contents of PSL_TB_CTLSTAT register have changed in PSL9 and all of the register is now readonly. Hence we don't need an sl_ops implementation for 'write_timebase_ctrl' for to populate this register for PSL9. Hence this patch removes function write_timebase_ctrl_psl9() and its references from the code. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13cxl: Enable NORST bit in PSL_DEBUG register for PSL9Vaibhav Jain1-2/+6
We enable the NORST bit by default for debug afu images to prevent reset of AFU trace-data on a PCI link drop. For production AFU images this bit is always ignored and PSL gets reconfigured anyways thereby resetting the trace data. So setting this bit for non-debug images doesn't have any impact. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-09Merge tag 'powerpc-4.16-5' of ↵Linus Torvalds1-0/+27
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix to properly advertise our support for a new firmware feature, caused by two series conflicting semantically but not textually. There's a new ioctl for the new ocxl driver, which is not a fix, but needed to complete the userspace API and good to have before the driver is in a released kernel. Finally three minor selftest fixes, and a fix for intermittent build failures for some obscure platforms, caused by a missing make dependency. Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck" * tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix vector5 in ibm architecture vector table ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL ocxl: Add get_metadata IOCTL to share OCXL information to userspace selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable selftests/powerpc: Fix missing clean of pmu/lib.o powerpc/boot: Fix random libfdt related build errors selftests/powerpc: Skip tm-trap if transactional memory is not enabled
2018-03-06lkdtm: Add missing SPDX-License-Identifier lineKees Cook1-0/+1
The refcount.c file missed the mass-addition of the SPDX lines. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06lkdtm: Relocate code to subdirectoryKees Cook10-19/+21
The LKDTM modules keep expanding, and it's getting weird to have each file get a prefix. Instead, move to a subdirectory for cleaner handling. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-02ocxl: Add get_metadata IOCTL to share OCXL information to userspaceAlastair D'Silva1-0/+27
Some required information is not exposed to userspace currently (eg. the PASID), pass this information back, along with other information which is currently communicated via sysfs, which saves some parsing effort in userspace. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-01misc: rtsx: rename SG_END macroArnd Bergmann1-2/+2
A change to the generic scatterlist code caused a conflict with the rtsx card reader driver: In file included from drivers/misc/cardreader/rtsx_pcr.c:32: include/linux/rtsx_pci.h:40: error: "SG_END" redefined [-Werror] This changes one instance of the driver to prefix SG_END and related constants. Fixes: 723fbf563a6a ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings") Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-24Merge tag 'powerpc-4.16-4' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Add handling for a missing instruction in our 32-bit BPF JIT so that it can be used for seccomp filtering. - Add a missing NULL pointer check before a function call in new EEH code. - Fix an error path in the new ocxl driver to correctly return EFAULT. - The support for the new ibm,drc-info device tree property turns out to need several fixes, so for now we just stop advertising to firmware that we support it until the bugs can be ironed out. - One fix for the new drmem code which was incorrectly modifying the device tree in place. - Finally two fixes for the RFI flush support, so that firmware can advertise to us that it should be disabled entirely so as not to affect performance. Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord, Michael Bringmann. * tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Support firmware disable of RFI flush powerpc/pseries: Support firmware disable of RFI flush powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2 powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access powerpc/pseries: Revert support for ibm,drc-info devtree property powerpc/pseries: Fix duplicate firmware feature for DRC_INFO ocxl: Fix potential bad errno on irq allocation powerpc/eeh: Fix crashes in eeh_report_resume()
2018-02-22Merge tag 'char-misc-4.16-rc3' of ↵Linus Torvalds4-6/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a handful of char/misc driver fixes for 4.16-rc3. There are some binder driver fixes to resolve reported issues in stress testing the recent binder changes, some extcon driver fixes, and a few mei driver fixes and new device ids. All of these, with the exception of the mei driver id additions, have been in linux-next for a while. I forgot to push out the mei driver id additions to kernel.org until today, but all build tests pass with them enabled" * tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: add cannon point device ids for 4th device mei: me: add cannon point device ids mei: set device client to the disconnected state upon suspend. ANDROID: binder: synchronize_rcu() when using POLLFREE. binder: replace "%p" with "%pK" ANDROID: binder: remove WARN() for redundant txn error binder: check for binder_thread allocation failure in binder_poll() extcon: int3496: process id-pin first so that we start with the right status Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" extcon: axp288: Constify the axp288_pwr_up_down_info array
2018-02-21ocxl: Fix potential bad errno on irq allocationFrederic Barrat1-2/+4
Fix some issues found by a static checker: When allocating an AFU interrupt, if the driver cannot copy the output parameters to userland, the errno value was not set to EFAULT Remove a (now) useless cast. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>