summaryrefslogtreecommitdiffstats
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds1-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
2020-10-22Merge branch 'work.set_fs' of ↵Linus Torvalds4-29/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
2020-10-21Merge branch 'i2c/for-5.10' of ↵Linus Torvalds2-8/+65
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - if a host can be a client, too, the I2C core can now use it to emulate SMBus HostNotify support (STM32 and R-Car added this so far) - also for client mode, a testunit has been added. It can create rare situations on the bus, so host controllers can be tested - a binding has been added to mark the bus as "single-master". This allows for better timeout detections - new driver for Mellanox Bluefield - massive refactoring of the Tegra driver - EEPROMs recognized by the at24 driver can now have custom names - rest is driver updates * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits) Documentation: i2c: add testunit docs to index i2c: tegra: Improve driver module description i2c: tegra: Clean up whitespaces, newlines and indentation i2c: tegra: Clean up and improve comments i2c: tegra: Clean up printk messages i2c: tegra: Clean up variable names i2c: tegra: Improve formatting of variables i2c: tegra: Check errors for both positive and negative values i2c: tegra: Factor out hardware initialization into separate function i2c: tegra: Factor out register polling into separate function i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg() i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() i2c: tegra: Rename wait/poll functions i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear() i2c: tegra: Remove likely/unlikely from the code i2c: tegra: Remove outdated barrier() i2c: tegra: Clean up variable types i2c: tegra: Reorder location of functions in the code i2c: tegra: Clean up probe function ...
2020-10-21Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas1-2/+7
- Document R8A774A1, R8A774B1, R8A774E1 endpoint support in DT (Lad Prabhakar) - Add R8A774A1, R8A774B1, R8A774E1 (RZ/G2M, RZ/G2N, RZ/G2H) IDs to endpoint test (Lad Prabhakar) - Add device tree support for R8A7742 (Lad Prabhakar) - Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva) * remotes/lorenzo/pci/rcar: dt-bindings: PCI: rcar: Add device tree support for r8a7742 PCI: rcar-gen2: Use fallthrough pseudo-keyword misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller dt-bindings: pci: rcar-pci-ep: Document r8a774e1 misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1
2020-10-16Merge tag 'powerpc-5.10-1' of ↵Linus Torvalds4-16/+17
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for powerpc, as well as a related fix for sparc. - Remove support for PowerPC 601. - Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA v3.1 (Power10) watchpoint features. - A fix for kernels using 4K pages and the hash MMU on bare metal Power9 systems with > 16TB of RAM, or RAM on the 2nd node. - A basic idle driver for shallow stop states on Power10. - Tweaks to our sched domains code to better inform the scheduler about the hardware topology on Power9/10, where two SMT4 cores can be presented by firmware as an SMT8 core. - A series doing further reworks & cleanups of our EEH code. - Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to prevent root from overwriting kernel memory. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt, Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang Yingliang, zhengbin. * tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits) Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed" selftests/powerpc: Fix eeh-basic.sh exit codes cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier powerpc/time: Make get_tb() common to PPC32 and PPC64 powerpc/time: Make get_tbl() common to PPC32 and PPC64 powerpc/time: Remove get_tbu() powerpc/time: Avoid using get_tbl() and get_tbu() internally powerpc/time: Make mftb() common to PPC32 and PPC64 powerpc/time: Rename mftbl() to mftb() powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S powerpc/32s: Rename head_32.S to head_book3s_32.S powerpc/32s: Setup the early hash table at all time. powerpc/time: Remove ifdef in get_dec() and set_dec() powerpc: Remove get_tb_or_rtc() powerpc: Remove __USE_RTC() powerpc: Tidy up a bit after removal of PowerPC 601. powerpc: Remove support for PowerPC 601 powerpc: Remove PowerPC 601 powerpc: Drop SYNC_601() ISYNC_601() and SYNC() powerpc: Remove CONFIG_PPC601_SYNC_FIX ...
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds6-3/+6
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-15Merge tag 'char-misc-5.10-rc1' of ↵Linus Torvalds68-7988/+11256
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ...
2020-10-14Merge tag 'kernel-clone-v5.9' of ↵Linus Torvalds1-24/+24
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull kernel_clone() updates from Christian Brauner: "During the v5.9 merge window we reworked the process creation codepaths across multiple architectures. After this work we were only left with the _do_fork() helper based on the struct kernel_clone_args calling convention. As was pointed out _do_fork() isn't valid kernelese especially for a helper that isn't just static. This series removes the _do_fork() helper and introduces the new kernel_clone() helper. The process creation cleanup didn't change the name to something more reasonable mainly because _do_fork() was used in quite a few places. So sending this as a separate series seemed the better strategy. I originally intended to send this early in the v5.9 development cycle after the merge window had closed but given that this was touching quite a few places I decided to defer this until the v5.10 merge window" * tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: sched: remove _do_fork() tracing: switch to kernel_clone() kgdbts: switch to kernel_clone() kprobes: switch to kernel_clone() x86: switch to kernel_clone() sparc: switch to kernel_clone() nios2: switch to kernel_clone() m68k: switch to kernel_clone() ia64: switch to kernel_clone() h8300: switch to kernel_clone() fork: introduce kernel_clone()
2020-10-12Merge tag 'x86_pasid_for_5.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PASID updates from Borislav Petkov: "Initial support for sharing virtual addresses between the CPU and devices which doesn't need pinning of pages for DMA anymore. Add support for the command submission to devices using new x86 instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support for process address space identifiers (PASIDs) which are referenced by those command submission instructions along with the handling of the PASID state on context switch as another extended state. Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang" * tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction x86/asm: Carve out a generic movdir64b() helper for general usage x86/mmu: Allocate/free a PASID x86/cpufeatures: Mark ENQCMD as disabled when configured out mm: Add a pasid member to struct mm_struct x86/msr-index: Define an IA32_PASID MSR x86/fpu/xstate: Add supervisor PASID state for ENQCMD x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions Documentation/x86: Add documentation for SVA (Shared Virtual Addressing) iommu/vt-d: Change flags type to unsigned int in binding mm drm, iommu: Change type of pasid to u32
2020-10-08misc: Kconfig: fix a HISI_HIKEY_USB dependencyMauro Carvalho Chehab1-1/+1
The dependency should be just USB_ROLE_SWITCH, instead of CONFIG_USB_ROLE_SWITCH. Fixes: 2827d98bc5d6 ("misc: Kconfig: add a new dependency for HISI_HIKEY_USB") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/0b6dff854c4bb412c2c11f17803e84d61385415f.1602138248.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07misc: Kconfig: add a new dependency for HISI_HIKEY_USBMauro Carvalho Chehab1-0/+1
As warned by Randy: on x86_64: CONFIG_USB_ROLE_SWITCH=m and HISI_HIKEY_USB=y. ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_remove': hisi_hikey_usb.c:(.text+0x61): undefined reference to `usb_role_switch_unregister' ld: hisi_hikey_usb.c:(.text+0xa4): undefined reference to `usb_role_switch_put' ld: drivers/misc/hisi_hikey_usb.o: in function `hub_usb_role_switch_set': hisi_hikey_usb.c:(.text+0xd3): undefined reference to `usb_role_switch_get_drvdata' ld: drivers/misc/hisi_hikey_usb.o: in function `relay_set_role_switch': hisi_hikey_usb.c:(.text+0x54d): undefined reference to `usb_role_switch_set_role' ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_probe': hisi_hikey_usb.c:(.text+0x8a5): undefined reference to `usb_role_switch_get' ld: hisi_hikey_usb.c:(.text+0xa08): undefined reference to `usb_role_switch_register' ld: hisi_hikey_usb.c:(.text+0xa6e): undefined reference to `usb_role_switch_put' Make it dependent on CONFIG_USB_ROLE_SWITCH. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/0e49432d0db9ee8429a9923a1d995935b6b83552.1602047370.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07x86/platform/uv: Update Copyrights to conform to HPE standardsMike Travis7-0/+7
Add Copyrights to those files that have been updated for UV5 changes. Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201005203929.148656-14-mike.travis@hpe.com
2020-10-07x86/platform/uv: Update UV MMRs for UV5Mike Travis1-1/+1
Update UV MMRs in uv_mmrs.h for UV5 based on Verilog output from the UV Hub hardware design files. This is the next UV architecture with a new class (UVY) being defined for 52 bit physical address masks. Uses a bitmask for UV arch identification so a single test can cover multiple versions. Includes other adjustments to match the uv_mmrs.h file to keep from encountering compile errors. New UV5 functionality is added in the patches that follow. [ Fix W=1 build warnings. ] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Link: https://lkml.kernel.org/r/20201005203929.148656-5-mike.travis@hpe.com
2020-10-07drivers/misc/sgi-xp: Adjust references in UV kernel modulesMike Travis6-15/+12
Remove the define is_uv() is_uv_system and just use the latter as is. This removes a conflict with a new symbol in the generated uv_mmrs.h file (is_uv()). Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Link: https://lkml.kernel.org/r/20201005203929.148656-4-mike.travis@hpe.com
2020-10-06dma-mapping: split <linux/dma-mapping.h>Christoph Hellwig5-3/+5
Split out all the bits that are purely for dma_map_ops implementations and related code into a new <linux/dma-map-ops.h> header so that they don't get pulled into all the drivers. That also means the architecture specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h> any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-02mic: vop: copy data to kernel space then write to io memorySherry Sun1-6/+14
Read and write io memory should address align on ARCH ARM. Change to use memcpy_toio to avoid kernel panic caused by the address un-align issue. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-5-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: add round_up(x,4) for vring_size to avoid kernel panicSherry Sun2-3/+3
Since struct _mic_vring_info and vring are allocated together and follow vring, if the vring_size() is not four bytes aligned, which will cause the start address of struct _mic_vring_info is not four byte aligned. For example, when vring entries is 128, the vring_size() will be 5126 bytes. The _mic_vring_info struct layout in ddr looks like: 0x90002400: 00000000 00390000 EE010000 0000C0FF Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member. When EP use ioread32(magic) to reads the magic in RC's share memory, it will cause kernel panic on ARM64 platform due to the cross-byte io read. Here read magic in user space use le32toh(vr0->info->magic) will meet the same issue. So add round_up(x,4) for vring_size, then the struct _mic_vring_info will store in this way: 0x90002400: 00000000 00000000 00000039 C0FFEE01 Which will avoid kernel panic when read magic in struct _mic_vring_info. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: build VOP based on CONFIG_VOPSherry Sun1-1/+1
Build module or builtin VOP based on CONFIG_VOP macro. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-3-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: set VIRTIO_F_ACCESS_PLATFORM for vop driverSherry Sun1-0/+1
Set VIRTIO_F_ACCESS_PLATFORM feature for vop driver, as the DMA mapping details shouldn't decide on the virtio implementation, but the host PCIe implementation. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929084944.24146-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02eeprom: ee1004: use module_i2c_driver to simplify the codeLiu Shixin1-12/+1
Use the module_i2c_driver() macro to make the code smaller and a bit simpler. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200918030225.3902750-1-liushixin2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02ocxl: simplify the return expression of free_function_dev()Qinglang Miao1-6/+1
Simplify the return expression. Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131047.92526-1-miaoqinglang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02ocxl: fix kconfig dependency warning for OCXLNecip Fazil Yildiran1-2/+1
When OCXL is enabled and HOTPLUG_PCI is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for HOTPLUG_PCI_POWERNV Depends on [n]: PCI [=y] && HOTPLUG_PCI [=n] && PPC_POWERNV [=y] && EEH [=y] Selected by [y]: - OCXL [=y] && PPC_POWERNV [=y] && PCI [=y] && EEH [=y] The reason is that OCXL selects HOTPLUG_PCI_POWERNV without depending on or selecting HOTPLUG_PCI while HOTPLUG_PCI_POWERNV is subordinate to HOTPLUG_PCI. HOTPLUG_PCI_POWERNV is a visible symbol with a set of dependencies. Selecting it will lead to overlooking its other dependencies as well. Let OCXL depend on HOTPLUG_PCI_POWERNV instead to avoid Kbuild issues. Fixes: 49ce94b8677c ("ocxl: Add PCI hotplug dependency to Kconfig") Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://lore.kernel.org/r/20200918094148.20525-1-fazilyildiran@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-30misc: mic: drop double zeroingJulia Lawall1-1/+1
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(struct scatterlist),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1600601186-7420-14-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-30habanalabs/gaudi: use correct define for qman initOded Gabbay1-1/+1
There was a copy-paste error, and the wrong define was used for initializing the QMAN. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Link: https://lore.kernel.org/r/20200925171415.25663-1-oded.gabbay@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-27Merge tag 'at24-updates-for-v5.10' of ↵Wolfram Sang1-7/+64
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.10 at24 updates for v5.10 - add support for masking sensitive data in VAIO EEPROMs - set the nvmem TYPE to NVMEM_TYPE_EEPROM - add support for the new 'label' property - set the nvmem ID to NVMEM_DEVID_AUTO by default (for backward compatibility) or to NVMEM_DEVID_NONE if label is defined
2020-09-25eeprom: at24: Support custom device names for AT24 EEPROMsJon Hunter1-1/+21
By using the label property, a more descriptive name can be populated for AT24 EEPROMs NVMEM device. Update the AT24 driver to check to see if the label property is present and if so, use this as the name for NVMEM device. Please note that when the 'label' property is present for the AT24 EEPROM, we do not want the NVMEM driver to append the 'devid' to the name and so the nvmem_config.id is initialised to NVMEM_DEVID_NONE. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-25habanalabs/gaudi: configure QMAN LDMA registers properlyOfir Bitton2-21/+49
LDMA registers are configured with a fixed value. We add new define set which gives the configuration a proper meaning. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-25habanalabs: add notice of device not idleOded Gabbay1-0/+8
The device should be idle after a context is closed. If not, print a notice. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-25habanalabs: add debug messages for opening/closing contextOded Gabbay1-0/+5
During debugging of error we sometimes need to know whether the error happened when a user context was open. Add debug prints when opening and closing user contexts. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-25habanalabs: release kernel context after hw_finiOded Gabbay1-7/+6
Some engines use resources that belong to the kernel context (e.g. MMU mappings). In case the halt-engines doesn't work properly due to H/W restriction, we need to make sure the kernel context lives on until after the hw_fini. The hw_fini resets the ASIC after that no engine is alive and we can safely close the kernel context. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-25habanalabs: correct an error messageOded Gabbay1-2/+2
We don't try to allocate huge pages here so remove the huge word. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-25Merge branch 'master' of ↵Christoph Hellwig3-21/+24
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into dma-mapping-for-next Pull in the latest 5.9 tree for the commit to revert the V4L2_FLAG_MEMORY_NON_CONSISTENT uapi addition.
2020-09-24eeprom: at24: Initialise AT24 NVMEM ID fieldJon Hunter1-0/+1
The AT24 EEPROM driver does not initialise the 'id' field of the nvmem_config structure and because the entire structure is not initialised, it ends up with a random value. This causes the NVMEM driver to append the device 'devid' value to name of the NVMEM device. Ideally for I2C devices such as the AT24 that already have a unique name, we would not bother to append the 'devid'. However, given that this has always been done for AT24 devices, we cannot remove the 'devid' as this will change the name of the userspace sysfs node for the NVMEM device. Nonetheless we should ensure that the 'id' field of the nvmem_config structure is initialised so that there is no chance of a random value causes problems in the future. Therefore, set the NVMEM config.id to NVMEM_DEVID_AUTO for AT24 EEPROMs so that the 'devid' is always appended. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllersHou Zhiqiang1-2/+6
The commit 0a121f9bc3f5 ("misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation") changed to use streaming DMA APIs, however, dma_map_single() might not return a 4KB aligned address, so add the default_data as driver data for Layerscape PCIe controllers to make it 4KB aligned. Link: https://lore.kernel.org/r/20200918080024.13639-13-Zhiqiang.Hou@nxp.com Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2020-09-24misc: pci_endpoint_test: Add LS1088a in pci_device_id tableXiaowei Bao1-0/+2
Add LS1088a in pci_device_id table so that pci-epf-test can be used for testing PCIe EP in LS1088a. Link: https://lore.kernel.org/r/20200918080024.13639-12-Zhiqiang.Hou@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2020-09-22misc: hisi_hikey_usb: delete a stray tabDan Carpenter1-1/+1
This return statement is indented one tab too far. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200918143405.GF909725@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22misc: mic: scif: Fix error handling pathSouptick Joarder1-2/+2
Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it will call pin_user_pages_fast() to map nr_pages. However, pin_user_pages_fast() might fail with a return value -ERRNO. The return value is stored in pinned_pages->nr_pages. which in turn is passed to unpin_user_pages(), which expects pinned_pages->nr_pages >=0, else disaster. Fix this by assigning pinned_pages->nr_pages to 0 if pin_user_pages_fast() returns -ERRNO. Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22misc: pvpanic: Use devm_platform_ioremap_resource()Wang ShaoBo1-7/+1
Make use of devm_platform_ioremap_resource() provided by driver core platform instead of duplicated analogue. Acked-by: Arnd Bergmann <arn@arndb.de> Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20200918083634.33124-1-bobo.shaobowang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-22habanalabs: update scratchpad register mapOded Gabbay2-0/+2
Our firmware use some scratchpad registers in the device for different roles. Update the file to the latest version of the firmware code. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: add indication of security-enabled F/WOded Gabbay5-20/+94
Future F/W versions will have enhanced security measures and the driver won't be able to do certain configurations that it always did and those configurations will be done by the firmware. We use the firmware's preboot version to determine whether security measures are enabled or not. Because we need this very early in our code, the read of the preboot version is moved to the earliest possible place, right after the device's PCI initialization. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs/gaudi: fix DMA completions max outstanding to 15Oded Gabbay1-0/+3
This is a workaround for H/W bug H3-2116, where if there are more than 16 outstanding completions in the DMA transpose engine, there can be a deadlock in the engine. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs/gaudi: remove axi drain supportOded Gabbay1-16/+0
AXI drain is broken in GAUDI so remove support for enabling it. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: update firmware interface fileOded Gabbay1-0/+25
Add new packet to fetch PLL information from firmware. This will be needed in the future when the driver won't be able to access the PLL registers directly Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: Add an option to map CB to device MMUTomer Tayar5-10/+226
There are cases in which the device should access the host memory of a CB through the device MMU, and thus this memory should be mapped. The patch adds a flag to the CB IOCTL, in which a user can ask the driver to perform the mapping when creating a CB. The mapping is allowed only if a dedicated VA range was allocated for the specific ASIC. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: Save context in a command buffer objectTomer Tayar5-22/+31
Future changes require using a context while handling a command buffer, and thus need to save the context in the command buffer object. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: no need for DMA_SHARED_BUFFEROded Gabbay1-1/+0
Now that the driver no longer uses dma_buf, we can remove the select of DMA_SHARED_BUFFER from kconfig. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: allow to wait on CS without sleepOded Gabbay1-2/+5
The user sometimes wants to check if a CS has completed to clean resources. In that case, the user doesn't want to sleep but just to check if the CS has finished and continue with his code. Add a new definition to the API of the wait on CS. The new definition says that if the timeout is 0, the driver won't sleep at all but return immediately after checking if the CS has finished. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs/gaudi: increase timeout for boot fit loadOded Gabbay1-1/+1
The firmware running in the boot stage takes more time to execute due to increased security mechanisms. Therefore, we need to increase the timeout we wait for the boot fit to finish loading. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: add debugfs support for MMU with 6 HOPsMoti Haimovski1-10/+60
This commit modify the existing debugfs code to support future devices that have a 6 HOPs MMU implementation instead of 5 HOPs implementation. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: add num_hops to hl_mmu_propertiesMoti Haimovski4-0/+11
This commit adds the number of HOPs supported by the device to the device MMU properties. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>