Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
|
|
Pull drm updates from Dave Airlie:
"Intel have enabled DG2 on certain SKUs for laptops, AMD has started
some new GPU support, msm has user allocated VA controls
dma-buf:
- add dma_resv_replace_fences
- add dma_resv_get_singleton
- make dma_excl_fence private
core:
- EDID parser refactorings
- switch drivers to drm_mode_copy/duplicate
- DRM managed mutex initialization
display-helper:
- put HDMI, SCDC, HDCP, DSC and DP into new module
gem:
- rework fence handling
ttm:
- rework bulk move handling
- add common debugfs for resource managers
- convert to kvcalloc
format helpers:
- support monochrome formats
- RGB888, RGB565 to XRGB8888 conversions
fbdev:
- cfb/sys_imageblit fixes
- pagelist corruption fix
- create offb platform device
- deferred io improvements
sysfb:
- Kconfig rework
- support for VESA mode selection
bridge:
- conversions to devm_drm_of_get_bridge
- conversions to panel_bridge
- analogix_dp - autosuspend support
- it66121 - audio support
- tc358767 - DSI to DPI support
- icn6211 - PLL/I2C fixes, DT property
- adv7611 - enable DRM_BRIDGE_OP_HPD
- anx7625 - fill ELD if no monitor
- dw_hdmi - add audio support
- lontium LT9211 support, i.MXMP LDB
- it6505: Kconfig fix, DPCD set power fix
- adv7511 - CEC support for ADV7535
panel:
- ltk035c5444t, B133UAN01, NV3052C panel support
- DataImage FG040346DSSWBG04 support
- st7735r - DT bindings fix
- ssd130x - fixes
i915:
- DG2 laptop PCI-IDs ("motherboard down")
- Initial RPL-P PCI IDs
- compute engine ABI
- DG2 Tile4 support
- DG2 CCS clear color compression support
- DG2 render/media compression formats support
- ATS-M platform info
- RPL-S PCI IDs added
- Bump ADL-P DMC version to v2.16
- Support static DRRS
- Support multiple eDP/LVDS native mode refresh rates
- DP HDR support for HSW+
- Lots of display refactoring + fixes
- GuC hwconfig support and query
- sysfs support for multi-tile
- fdinfo per-client gpu utilisation
- add geometry subslices query
- fix prime mmap with LMEM
- fix vm open count and remove vma refcounts
- contiguous allocation fixes
- steered register write support
- small PCI BAR enablement
- GuC error capture support
- sunset igpu legacy mmap support for newer devices
- GuC version 70.1.1 support
amdgpu:
- Initial SoC21 support
- SMU 13.x enablement
- SMU 13.0.4 support
- ttm_eu cleanups
- USB-C, GPUVM updates
- TMZ fixes for RV
- RAS support for VCN
- PM sysfs code cleanup
- DC FP rework
- extend CG/PG flags to 64-bit
- SI dpm lockdep fix
- runtime PM fixes
amdkfd:
- RAS/SVM fixes
- TLB flush fixes
- CRIU GWS support
- ignore bogus MEC signals more efficiently
msm:
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- DPU: DSC (Display Stream Compression) support
- DP: eDP support
- DP: conversion to use drm_bridge and drm_bridge_connector
- Merge DPU1 and MDP5 MDSS driver
- DPU: writeback support
nouveau:
- make some structures static
- make some variables static
- switch to drm_gem_plane_helper_prepare_fb
radeon:
- misc fixes/cleanups
mxsfb:
- rework crtc mode setting
- LCDIF CRC support
etnaviv:
- fencing improvements
- fix address space collisions
- cleanup MMU reference handling
gma500:
- GEM/GTT improvements
- connector handling fixes
komeda:
- switch to plane reset helper
mediatek:
- MIPI DSI improvements
omapdrm:
- GEM improvements
qxl:
- aarch64 support
vc4:
- add a CL submission tracepoint
- HDMI YUV support
- HDMI/clock improvements
- drop is_hdmi caching
virtio:
- remove restriction of non-zero blob types
vmwgfx:
- support for cursormob and cursorbypass 4
- fence improvements
tidss:
- reset DISPC on startup
solomon:
- SPI support
- DT improvements
sun4i:
- allwinner D1 support
- drop is_hdmi caching
imx:
- use swap() instead of open-coding
- use devm_platform_ioremap_resource
- remove redunant initializations
ast:
- Displayport support
rockchip:
- Refactor IOMMU initialisation
- make some structures static
- replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
- support swapped YUV formats,
- clock improvements
- rk3568 support
- VOP2 support
mediatek:
- MT8186 support
tegra:
- debugabillity improvements"
* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
drm/i915/dsi: fix VBT send packet port selection for ICL+
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
drm/i915/reg: fix undefined behavior due to shift overflowing the constant
drm/i915/gt: Fix use of static in macro mismatch
drm/i915/audio: fix audio code enable/disable pipe logging
drm/i915: Fix CFI violation with show_dynamic_id()
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
drm/i915/gt: Fix build error without CONFIG_PM
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
drm/msm: don't free the IRQ if it was not requested
drm/msm/dpu: limit writeback modes according to max_linewidth
drm/amd: Don't reset dGPUs if the system is going to s2idle
drm/amdgpu: Unmap legacy queue when MES is enabled
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
drm/msm: Fix fb plane offset calculation
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
drm/msm/dsi: don't powerup at modeset time for parade-ps8640
drm/rockchip: Change register space names in vop2
dt-bindings: display: rockchip: make reg-names mandatory for VOP2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- usercopy hardening expanded to check other allocation types (Matthew
Wilcox, Yuanzheng Song)
- arm64 stackleak behavioral improvements (Mark Rutland)
- arm64 CFI code gen improvement (Sami Tolvanen)
- LoadPin LSM block dev API adjustment (Christoph Hellwig)
- Clang randstruct support (Bill Wendling, Kees Cook)
* tag 'kernel-hardening-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (34 commits)
loadpin: stop using bdevname
mm: usercopy: move the virt_addr_valid() below the is_vmalloc_addr()
gcc-plugins: randstruct: Remove cast exception handling
af_unix: Silence randstruct GCC plugin warning
niu: Silence randstruct warnings
big_keys: Use struct for internal payload
gcc-plugins: Change all version strings match kernel
randomize_kstack: Improve docs on requirements/rationale
lkdtm/stackleak: fix CONFIG_GCC_PLUGIN_STACKLEAK=n
arm64: entry: use stackleak_erase_on_task_stack()
stackleak: add on/off stack variants
lkdtm/stackleak: check stack boundaries
lkdtm/stackleak: prevent unexpected stack usage
lkdtm/stackleak: rework boundary management
lkdtm/stackleak: avoid spurious failure
stackleak: rework poison scanning
stackleak: rework stack high bound handling
stackleak: clarify variable names
stackleak: rework stack low bound handling
stackleak: remove redundant check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.19 merge window
This includes following Thunderbolt/USB4 changes for the v5.19 merge
window:
* Improvements for Thunderbolt 1 DisplayPort tunneling
* Link USB4 ports to their USB Type-C connectors
* Lane bonding support for host-to-host (XDomain) connections
* Buffer allocation improvement for devices with no DisplayPort
adapters
* Few cleanups and minor fixes.
All these have been in linux-next with no reported issues except that
there is a minor merge conflict with the kunit-next tree because one of
the commits touches the driver KUnit tests.
* tag 'thunderbolt-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add KUnit test for devices with no DisplayPort adapters
thunderbolt: Fix buffer allocation of devices with no DisplayPort adapters
thunderbolt: Add support for XDomain lane bonding
thunderbolt: Ignore port locked error in tb_port_wait_for_link_width()
thunderbolt: Split setting link width and lane bonding into own functions
thunderbolt: Move tb_port_state() prototype to correct place
thunderbolt: Add debug logging when lane is enabled/disabled
thunderbolt: Link USB4 ports to their USB Type-C connectors
misc/mei: Add NULL check to component match callback functions
thunderbolt: Use different lane for second DisplayPort tunnel
thunderbolt: Dump path config space entries during discovery
thunderbolt: Use decimal number with port numbers
thunderbolt: Fix typo in comment
thunderbolt: Replace usage of found with dedicated list iterator variable
|
|
powerpc's asm/prom.h brings some headers that it doesn't
need itself.
In order to clean it up, first add missing headers in
users of asm/prom.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a2bae89b280e7a7cb87889635d9911d6a245e780.1648833388.git.christophe.leroy@csgroup.eu
|
|
Recent rework broke building LKDTM when CONFIG_GCC_PLUGIN_STACKLEAK=n.
This patch fixes that breakage.
Prior to recent stackleak rework, the LKDTM STACKLEAK_ERASING code could
be built when the kernel was not built with stackleak support, and would
run a test that would almost certainly fail (or pass by sheer cosmic
coincidence), e.g.
| # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry STACKLEAK_ERASING
| lkdtm: checking unused part of the thread stack (15560 bytes)...
| lkdtm: FAIL: the erased part is not found (checked 15560 bytes)
| lkdtm: FAIL: the thread stack is NOT properly erased!
| lkdtm: This is probably expected, since this kernel (5.18.0-rc2 aarch64) was built *without* CONFIG_GCC_PLUGIN_STACKLEAK=y
The recent rework to the test made it more accurate by using helpers
which are only defined when CONFIG_GCC_PLUGIN_STACKLEAK=y, and so when
building LKDTM when CONFIG_GCC_PLUGIN_STACKLEAK=n, we get a build
failure:
| drivers/misc/lkdtm/stackleak.c: In function 'check_stackleak_irqoff':
| drivers/misc/lkdtm/stackleak.c:30:46: error: implicit declaration of function 'stackleak_task_low_bound' [-Werror=implicit-function-declaration]
| 30 | const unsigned long task_stack_low = stackleak_task_low_bound(current);
| | ^~~~~~~~~~~~~~~~~~~~~~~~
| drivers/misc/lkdtm/stackleak.c:31:47: error: implicit declaration of function 'stackleak_task_high_bound'; did you mean 'stackleak_task_init'? [-Werror=implicit-function-declaration]
| 31 | const unsigned long task_stack_high = stackleak_task_high_bound(current);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~
| | stackleak_task_init
| drivers/misc/lkdtm/stackleak.c:33:48: error: 'struct task_struct' has no member named 'lowest_stack'
| 33 | const unsigned long lowest_sp = current->lowest_stack;
| | ^~
| drivers/misc/lkdtm/stackleak.c:74:23: error: implicit declaration of function 'stackleak_find_top_of_poison' [-Werror=implicit-function-declaration]
| 74 | poison_high = stackleak_find_top_of_poison(task_stack_low, untracked_high);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch fixes the issue by not compiling the body of the test when
CONFIG_GCC_PLUGIN_STACKLEAK=n, and replacing this with an unconditional
XFAIL message. This means the pr_expected_config() in
check_stackleak_irqoff() is redundant, and so it is removed.
Where an architecture does not support stackleak, the test will log:
| # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry STACKLEAK_ERASING
| lkdtm: XFAIL: stackleak is not supported on this arch (HAVE_ARCH_STACKLEAK=n)
Where an architectures does support stackleak, but this has not been
compiled in, the test will log:
| # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry STACKLEAK_ERASING
| lkdtm: XFAIL: stackleak is not enabled (CONFIG_GCC_PLUGIN_STACKLEAK=n)
Where stackleak has been compiled in, the test behaves as usual:
| # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry STACKLEAK_ERASING
| lkdtm: stackleak stack usage:
| high offset: 336 bytes
| current: 688 bytes
| lowest: 1232 bytes
| tracked: 1232 bytes
| untracked: 672 bytes
| poisoned: 14136 bytes
| low offset: 8 bytes
| lkdtm: OK: the rest of the thread stack is properly erased
Fixes: f4cfacd92972cc44 ("lkdtm/stackleak: rework boundary management")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220506121145.1162908-1-mark.rutland@arm.com
|
|
The stackleak code relies upon the current SP and lowest recorded SP
falling within expected task stack boundaries.
Check this at the start of the test.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-12-mark.rutland@arm.com
|
|
The lkdtm_STACKLEAK_ERASING() test is instrumentable and runs with IRQs
unmasked, so it's possible for unrelated code to clobber the task stack
and/or manipulate current->lowest_stack while the test is running,
resulting in spurious failures.
The regular stackleak erasing code is non-instrumentable and runs with
IRQs masked, preventing similar issues.
Make the body of the test non-instrumentable, and run it with IRQs
masked, avoiding such spurious failures.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-11-mark.rutland@arm.com
|
|
There are a few problems with the way the LKDTM STACKLEAK_ERASING test
manipulates the stack pointer and boundary values:
* It uses the address of a local variable to determine the current stack
pointer, rather than using current_stack_pointer directly. As the
local variable could be placed anywhere within the stack frame, this
can be an over-estimate of the true stack pointer value.
* Is uses an estimate of the current stack pointer as the upper boundary
when scanning for poison, even though prior functions could have used
more stack (and may have updated current->lowest stack accordingly).
* A pr_info() call is made in the middle of the test. As the printk()
code is out-of-line and will make use of the stack, this could clobber
poison and/or adjust current->lowest_stack. It would be better to log
the metadata after the body of the test to avoid such problems.
These have been observed to result in spurious test failures on arm64.
In addition to this there are a couple of things which are sub-optimal:
* To avoid the STACK_END_MAGIC value, it conditionally modifies 'left'
if this contains more than a single element, when it could instead
calculate the bound unconditionally using stackleak_task_low_bound().
* It open-codes the poison scanning. It would be better if this used the
same helper code as used by erasing function so that the two cannot
diverge.
This patch reworks the test to avoid these issues, making use of the
recently introduced helpers to ensure this is aligned with the regular
stackleak code.
As the new code tests stack boundaries before accessing the stack, there
is no need to fail early when the tracked or untracked portions of the
stack extend all the way to the low stack boundary.
As stackleak_find_top_of_poison() is now used to find the top of the
poisoned region of the stack, the subsequent poison checking starts at
this boundary and verifies that stackleak_find_top_of_poison() is
working correctly.
The pr_info() which logged the untracked portion of stack is now moved
to the end of the function, and logs the size of all the portions of the
stack relevant to the test, including the portions at the top and bottom
of the stack which are not erased or scanned, and the current / lowest
recorded stack usage.
Tested on x86_64:
| # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry STACKLEAK_ERASING
| lkdtm: stackleak stack usage:
| high offset: 168 bytes
| current: 336 bytes
| lowest: 656 bytes
| tracked: 656 bytes
| untracked: 400 bytes
| poisoned: 15152 bytes
| low offset: 8 bytes
| lkdtm: OK: the rest of the thread stack is properly erased
Tested on arm64:
| # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry STACKLEAK_ERASING
| lkdtm: stackleak stack usage:
| high offset: 336 bytes
| current: 656 bytes
| lowest: 1232 bytes
| tracked: 1232 bytes
| untracked: 672 bytes
| poisoned: 14136 bytes
| low offset: 8 bytes
| lkdtm: OK: the rest of the thread stack is properly erased
Tested on arm64 with deliberate breakage to the starting stack value and
poison scanning:
| # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry STACKLEAK_ERASING
| lkdtm: FAIL: non-poison value 24 bytes below poison boundary: 0x0
| lkdtm: FAIL: non-poison value 32 bytes below poison boundary: 0xffff8000083dbc00
...
| lkdtm: FAIL: non-poison value 1912 bytes below poison boundary: 0x78b4b9999e8cb15
| lkdtm: FAIL: non-poison value 1920 bytes below poison boundary: 0xffff8000083db400
| lkdtm: stackleak stack usage:
| high offset: 336 bytes
| current: 688 bytes
| lowest: 1232 bytes
| tracked: 576 bytes
| untracked: 288 bytes
| poisoned: 15176 bytes
| low offset: 8 bytes
| lkdtm: FAIL: the thread stack is NOT properly erased!
| lkdtm: Unexpected! This kernel (5.18.0-rc1-00013-g1f7b1f1e29e0-dirty aarch64) was built with CONFIG_GCC_PLUGIN_STACKLEAK=y
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-10-mark.rutland@arm.com
|
|
The lkdtm_STACKLEAK_ERASING() test scans for a contiguous block of
poison values between the low stack bound and the stack pointer, and
fails if it does not find a sufficiently large block.
This can happen legitimately if the scan the low stack bound, which
could occur if functions called prior to lkdtm_STACKLEAK_ERASING() used
a large amount of stack. If this were to occur, it means that the erased
portion of the stack is smaller than the size used by the scan, but does
not cause a functional problem
In practice this is unlikely to happen, but as this is legitimate and
would not result in a functional problem, the test should not fail in
this case.
Remove the spurious failure case.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-9-mark.rutland@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Currently, component_match callback functions used in mei refers to the
driver name, assuming that the component device being matched has a
driver bound. It can cause a NULL pointer dereference when a device
without a driver bound registers a component. This is due to the nature
of the component framework where all registered components are matched
in any component_match callback functions. So even if a component is
registered by a totally irrelevant device, that component is also
shared to these callbacks for i915 driver.
To prevent totally irrelevant device being matched for i915 and causing
a NULL pointer dereference for checking driver name, add a NULL check on
dev->driver to check if there is a driver bound before checking the
driver name.
In the future, the string compare on the driver name, "i915" may need to
be refactored too.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Won Chung <wonchung@google.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.19:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Introduction of display-helper module, and rework of the DP, DSC,
HDCP, HDMI and SCDC headers
- doc: Improvements for tiny drivers, link to external resources
- formats: helper to convert from RGB888 and RGB565 to XRGB8888
- modes: make width-mm/height-mm check mandatory in of_get_drm_panel_display_mode
- ttm: Convert from kvmalloc_array to kvcalloc
Driver Changes:
- bridge:
- analogix_dp: Fix error handling in probe
- dw_hdmi: Coccinelle fixes
- it6505: Fix Kconfig dependency on DRM_DP_AUX_BUS
- panel:
- new panel: DataImage FG040346DSSWBG04
- amdgpu: ttm_eu cleanups
- mxsfb: Rework CRTC mode setting
- nouveau: Make some variables static
- sun4i: Drop drm_display_info.is_hdmi caching, support for the
Allwinner D1
- vc4: Drop drm_display_info.is_hdmi caching
- vmwgfx: Fence improvements
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 28 Apr 2022 17:52:13 AEST
# gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Can't check signature: No public key
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428075237.yypztjha7hetphcd@houat
|
|
Move DRM's HDCP helper library into the display/ subdirectory and add
it to DRM's display helpers. Split the header file into core and helpers.
Update all affected drivers. No functional changes.
v3:
* fix Kconfig dependencies
v2:
* fix include statements (Jani, Javier)
* update Kconfig symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-7-tzimmermann@suse.de
|
|
Reading EEPROM fails with following warning:
[ 16.357496] ------------[ cut here ]------------
[ 16.357529] fsl_spi b01004c0.spi: rejecting DMA map of vmalloc memory
[ 16.357698] WARNING: CPU: 0 PID: 371 at include/linux/dma-mapping.h:326 fsl_spi_cpm_bufs+0x2a0/0x2d8
[ 16.357775] CPU: 0 PID: 371 Comm: od Not tainted 5.16.11-s3k-dev-01743-g19beecbfe9d6-dirty #109
[ 16.357806] NIP: c03fbc9c LR: c03fbc9c CTR: 00000000
[ 16.357825] REGS: e68d9b20 TRAP: 0700 Not tainted (5.16.11-s3k-dev-01743-g19beecbfe9d6-dirty)
[ 16.357849] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24002282 XER: 00000000
[ 16.357931]
[ 16.357931] GPR00: c03fbc9c e68d9be0 c26d06a0 00000039 00000001 c0d36364 c0e96428 00000027
[ 16.357931] GPR08: 00000001 00000000 00000023 3fffc000 24002282 100d3dd6 100a2ffc 00000000
[ 16.357931] GPR16: 100cd280 100b0000 00000000 aff54f7e 100d0000 100d0000 00000001 100cf328
[ 16.357931] GPR24: 100cf328 00000000 00000003 e68d9e30 c156b410 e67ab4c0 e68d9d38 c24ab278
[ 16.358253] NIP [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8
[ 16.358292] LR [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8
[ 16.358325] Call Trace:
[ 16.358336] [e68d9be0] [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8 (unreliable)
[ 16.358388] [e68d9c00] [c03fcb44] fsl_spi_bufs.isra.0+0x94/0x1a0
[ 16.358436] [e68d9c20] [c03fd970] fsl_spi_do_one_msg+0x254/0x3dc
[ 16.358483] [e68d9cb0] [c03f7e50] __spi_pump_messages+0x274/0x8a4
[ 16.358529] [e68d9ce0] [c03f9d30] __spi_sync+0x344/0x378
[ 16.358573] [e68d9d20] [c03fb52c] spi_sync+0x34/0x60
[ 16.358616] [e68d9d30] [c03b4dec] at25_ee_read+0x138/0x1a8
[ 16.358667] [e68d9e50] [c04a8fb8] bin_attr_nvmem_read+0x98/0x110
[ 16.358725] [e68d9e60] [c0204b14] kernfs_fop_read_iter+0xc0/0x1fc
[ 16.358774] [e68d9e80] [c0168660] vfs_read+0x284/0x410
[ 16.358821] [e68d9f00] [c016925c] ksys_read+0x6c/0x11c
[ 16.358863] [e68d9f30] [c00160e0] ret_from_syscall+0x0/0x28
...
[ 16.359608] ---[ end trace a4ce3e34afef0cb5 ]---
[ 16.359638] fsl_spi b01004c0.spi: unable to map tx dma
This is due to the AT25 driver using buffers on stack, which is not
possible with CONFIG_VMAP_STACK.
As mentionned in kernel Documentation (Documentation/spi/spi-summary.rst):
- Follow standard kernel rules, and provide DMA-safe buffers in
your messages. That way controller drivers using DMA aren't forced
to make extra copies unless the hardware requires it (e.g. working
around hardware errata that force the use of bounce buffering).
Modify the driver to use a buffer located in the at25 device structure
which is allocated via kmalloc during probe.
Protect writes in this new buffer with the driver's mutex.
Fixes: b587b13a4f67 ("[PATCH] SPI eeprom driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/230a9486fc68ea0182df46255e42a51099403642.1648032613.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a hook to retrieve the firmware version of the
GSC devices to bus-fixup.
GSC has a different MKHI clients GUIDs but the same message structure
to retrieve the firmware version as MEI so mei_fwver() can be reused.
CC: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-6-daniele.ceraolospurio@intel.com
|
|
Implement runtime handlers for mei-gsc, to track
idle state of the device properly.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-5-daniele.ceraolospurio@intel.com
|
|
Setup char device in spite of firmware handshake failure.
In order to provide host access to the firmware status registers and other
information required for the manufacturing process.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-4-daniele.ceraolospurio@intel.com
|
|
GSC is a graphics system controller, based on CSE, it provides
a chassis controller for graphics discrete cards, as well as it
supports media protection on selected devices.
mei_gsc binds to a auxiliary devices exposed by Intel discrete
driver i915.
v2: fix error check in mei_gsc_probe
v3: update MODULE_LICENSE ("GPL" is preferred over "GPL v2" and they
both map to GPL version 2)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> #v3
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-3-daniele.ceraolospurio@intel.com
|
|
info_release() will be called in device_unregister() when info->dev's
reference count is 0. So there is no need to call ocxl_afu_put() and
kfree() again.
Fix this by adding free_minor() and return to err_unregister error path.
Fixes: 75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220418085758.38145-1-hbh25y@gmail.com
|
|
allmodconfig builds on 32-bit architectures fail with the following error.
drivers/misc/habanalabs/common/memory.c: In function 'alloc_device_memory':
drivers/misc/habanalabs/common/memory.c:153:49: error:
cast from pointer to integer of different size
Fix the typecast. While at it, drop other unnecessary typecasts associated
with the same commit.
Fixes: e8458e20e0a3c ("habanalabs: make sure device mem alloc is page aligned")
Cc: Ohad Sharabi <osharabi@habana.ai>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220404134859.3278599-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
|
|
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
|
|
__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308033255.22118-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The remote arguments carry both remote buffers and dma handles. Add proper
dma handle instructions to make it compatible with DSP implementation.
Signed-off-by: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add fdlist implementation to support dma handles. fdlist is populated by
DSP if any map is no longer used and it is freed during put_args.
Signed-off-by: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add helper functions to get invoke buffer and page start pointers.
Signed-off-by: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support to secure memory allocations for DSP.
It repurposes the reserved field in struct fastrpc_invoke_args
to add attributes to invoke request, for example to setup a secure memory
map for dsp. Secure memory is assigned to DSP Virtual Machine IDs using
Qualcomm SCM calls.
Signed-off-by: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reject session if DSP domain is secure, device node is non-secure and signed
PD is requested. Secure device node can access DSP without any restriction.
Unsigned PD offload is only allowed for the DSP domain that can support
unsigned offloading.
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ADSP/MDSP/SDSP are by default secured, which means it can only be loaded
with a Signed process.
Where as CDSP can be either be secured/unsecured. non-secured Compute DSP
would allow users to load unsigned process and run hexagon instructions,
but blocking access to secured hardware within the DSP. Where as signed
process with secure CDSP would be allowed to access all the dsp resources.
This patch adds basic code to create device nodes as per device tree property.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support to get DSP capabilities. The capability information is cached
on driver.
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for IOCTL requests to map and unmap on DSP based on map
flags.
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently fastrpc misc device instance is within channel context struct
with a kref. So we have 2 structs with refcount, both of them managing the
same channel context structure.
Separate fastrpc device from channel context and by adding a dedicated
fastrpc_device structure, this should clean the structures a bit and also help
when adding secure device node support.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220214161002.6831-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spelling mistake in an error message. Fix it.
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220315222253.2960047-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As bcm_vk driver is not the production driver for viper, remove
its pci device id from table.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Link: https://lore.kernel.org/r/20220302025340.25602-1-desmond.yan@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Eliminate the follow smatch warning:
drivers/misc/cardreader/rts5228.c:494 rts5228_extra_init_hw() warn:
inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220303020206.98911-1-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Usage of the iterator outside of the list_for_each_entry
is considered harmful. https://lkml.org/lkml/2022/2/17/1032
Do not reference the loop variable outside of the loop,
by rearranging the orders of execution.
Instead of performing search loop and checking outside the loop
if the end of the list was hit and no matching element was found,
the execution is performed inside the loop upon a successful match
followed by a goto statement to the next step,
therefore no condition has to be performed after the loop has ended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220308095926.300412-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Alder Lake N device ID.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220301071115.96145-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
notification_bitmap may not be released when VMCI_CAPS_DMA_DATAGRAM
capability is missing from the device. Add missing
'err_free_notification_bitmap' label and use it instead of
'err_free_data_buffers' to avoid this.
Fixes: eed2298d9360 ("VMCI: dma dg: detect DMA datagram capability")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Rajesh Jalisatgi <rjalisatgi@vmware.com>
Signed-off-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/20220318060040.31621-1-vdasa@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
free_irq() may be called to free an interrupt that was not
allocated. Add missing 'if' statement to check for
exclusive_vectors when freeing interrupt 1.
Fixes: cc68f2177fcb ("VMCI: dma dg: register dummy IRQ handlers for DMA datagrams")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Rajesh Jalisatgi <rjalisatgi@vmware.com>
Signed-off-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/20220318055843.30606-1-vdasa@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Steve Wahl <steve.wahl@hpe.com>
Cc: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
generic_handle_irq() is invoked from a regular interrupt service
routine. This handler will become a forced-threaded handler on
PREEMPT_RT and will be invoked with enabled interrupts. The
generic_handle_irq() must be invoked with disabled interrupts in order
to avoid deadlocks.
Instead of manually disabling interrupts before invoking use
generic_handle_irq_safe() which can be invoked with enabled and disabled
interrupts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220211181500.1856198-5-bigeasy@linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Mark Brown says:
====================
spi: Make remove() return void
This series from Uwe Kleine-König converts the spi remove function to
return void since there is nothing useful that we can do with a failure
and it as more buses are converted it'll enable further work on the
driver core.
====================
Link: https://lore.kernel.org/r/20220228173957.1262628-2-broonie@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During driver and F/W handshake, driver waits for F/W to reach
certain states in order to progress with the boot flow.
Some of the states were deprecated a long time ago and were never
present on official firmwares. Therefore, let's remove them from
the handshake process.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Several H/W events can be sent adjacently, even due to a single error.
If a hard-reset is triggered as part of handling one of these events,
the following events won't be handled.
The debug info from these missed events is important, sometimes even
more important than the one that was handled.
To allow handling these close events, add an option to delay a device
reset and use it when resetting due to H/W events.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|