summaryrefslogtreecommitdiffstats
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2015-04-21Merge tag 'char-misc-4.1-rc1' of ↵Linus Torvalds33-920/+1042
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patchset for 4.1-rc1. Lots of different driver subsystem updates here, nothing major, full details are in the shortlog. All of this has been in linux-next for a while" * tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits) mei: trace: remove unused TRACE_SYSTEM_STRING DTS: ARM: OMAP3-N900: Add lis3lv02d support Documentation: DT: lis302: update wakeup binding lis3lv02d: DT: add wakeup unit 2 and wakeup threshold lis3lv02d: DT: use s32 to support negative values Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case mei: replace check for connection instead of transitioning mei: use mei_cl_is_connected consistently mei: fix mei_poll operation hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg() Drivers: hv: hv_balloon: survive ballooning request with num_pages=0 Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function Drivers: hv: hv_balloon: do not online pages in offline blocks hv: remove the per-channel workqueue hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind() hv: run non-blocking message handlers in the dispatch tasklet coresight: moving to new "hwtracing" directory coresight-tmc: Adding a status interface to sysfs coresight: remove the unnecessary configuration coresight-default-sink ...
2015-04-14Merge branch 'for-linus-1' of ↵Linus Torvalds3-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs update from Al Viro: "Part one: - struct filename-related cleanups - saner iov_iter_init() replacements (and switching the syscalls to use of those) - ntfs switch to ->write_iter() (Anton) - aio cleanups and splitting iocb into common and async parts (Christoph) - assorted fixes (me, bfields, Andrew Elble) There's a lot more, including the completion of switchover to ->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags race fixes, etc, but that goes after #for-davem merge. David has pulled it, and once it's in I'll send the next vfs pull request" * 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits) sg_start_req(): use import_iovec() sg_start_req(): make sure that there's not too many elements in iovec blk_rq_map_user(): use import_single_range() sg_io(): use import_iovec() process_vm_access: switch to {compat_,}import_iovec() switch keyctl_instantiate_key_common() to iov_iter switch {compat_,}do_readv_writev() to {compat_,}import_iovec() aio_setup_vectored_rw(): switch to {compat_,}import_iovec() vmsplice_to_user(): switch to import_iovec() kill aio_setup_single_vector() aio: simplify arguments of aio_setup_..._rw() aio: lift iov_iter_init() into aio_setup_..._rw() lift iov_iter into {compat_,}do_readv_writev() NFS: fix BUG() crash in notify_change() with patch to chown_common() dcache: return -ESTALE not -EBUSY on distributed fs race NTFS: Version 2.1.32 - Update file write from aio_write to write_iter. VFS: Add iov_iter_fault_in_multipages_readable() drop bogus check in file_open_root() switch security_inode_getattr() to struct path * constify tomoyo_realpath_from_path() ...
2015-04-13Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm changes from Ingo Molnar: "There were lots of changes in this development cycle: - over 100 separate cleanups, restructuring changes, speedups and fixes in the x86 system call, irq, trap and other entry code, part of a heroic effort to deobfuscate a decade old spaghetti asm code and its C code dependencies (Denys Vlasenko, Andy Lutomirski) - alternatives code fixes and enhancements (Borislav Petkov) - simplifications and cleanups to the compat code (Brian Gerst) - signal handling fixes and new x86 testcases (Andy Lutomirski) - various other fixes and cleanups By their nature many of these changes are risky - we tried to test them well on many different x86 systems (there are no known regressions), and they are split up finely to help bisection - but there's still a fair bit of residual risk left so caveat emptor" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (148 commits) perf/x86/64: Report regs_user->ax too in get_regs_user() perf/x86/64: Simplify regs_user->abi setting code in get_regs_user() perf/x86/64: Do report user_regs->cx while we are in syscall, in get_regs_user() perf/x86/64: Do not guess user_regs->cs, ss, sp in get_regs_user() x86/asm/entry/32: Tidy up JNZ instructions after TESTs x86/asm/entry/64: Reduce padding in execve stubs x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_fork x86/asm/entry/64: Simplify jumps in ret_from_fork x86/asm/entry/64: Remove a redundant jump x86/asm/entry/64: Optimize [v]fork/clone stubs x86/asm/entry: Zero EXTRA_REGS for stub32_execve() too x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat() x86/asm/entry/64: Use common code for rt_sigreturn() epilogue x86/asm/entry/64: Add forgotten CFI annotation x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layout x86/asm/entry/64: Move opportunistic sysret code to syscall code path x86, selftests: Add sigreturn selftest x86/alternatives: Guard NOPs optimization x86/asm/entry: Clear EXTRA_REGS for all executable formats x86/signal: Remove pax argument from restore_sigcontext ...
2015-04-13mei: trace: remove unused TRACE_SYSTEM_STRINGTomas Winkler1-2/+0
fix warning: include/trace/ftrace.h:28:0: note: this is the location of the previous definition ^ In file included from include/trace/define_trace.h:90:0, from drivers/misc/mei/mei-trace.h:76, from drivers/misc/mei/mei-trace.c:21: include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-11Merge branch 'iocb' into for-nextAl Viro3-3/+0
2015-04-10Merge tag 'scsi-fixes' of ↵Linus Torvalds1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is our remaining set of three fixes for 4.0: two oops fixes(one for cable pulls triggering oopses and the other be2iscsi specific) and one warn on in sysfs on multipath devices using enclosures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Defer processing of REQ_PREEMPT requests for blocked devices be2iscsi: Fix kernel panic when device initialization fails enclosure: fix WARN_ON removing an adapter in multi-path devices
2015-04-03lis3lv02d: DT: add wakeup unit 2 and wakeup thresholdSebastian Reichel1-0/+17
This adds support for the the wakeup threshold and support for the second wakeup unit to the DT based setup. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03lis3lv02d: DT: use s32 to support negative valuesSebastian Reichel1-19/+20
st,axis-{x,y,z} can be negative to imply inverted axis. Apart from that the minimal and maximal threshold may be negative. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03mei: replace check for connection instead of transitioningTomas Winkler3-10/+12
The function mei_cl_is_transitioning is just opposite of mei_cl_is_connected. What we actually wanted to check is if we lost connection so we can discard the check for transition and check for 'not connected' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03mei: use mei_cl_is_connected consistentlyTomas Winkler5-17/+22
Replace open coded check for cl->state !=/== MEI_FILE_CONNECTED with mei_cl_is_connected function. Note that cl->state != MEI_FILE_CONNECTED is not the same as cl->state == MEI_FILE_DISCONNECTED Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03mei: fix mei_poll operationTomas Winkler3-24/+27
mei_poll returned with POLLIN w/o checking whether the operation has really completed. remove redundant check and locking in amthif specific handler Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03mic: drop pci_msi_off call on probeMichael S. Tsirkin1-2/+0
pci core now disables msi on probe automatically, drop this from device-specific code. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31enclosure: fix WARN_ON removing an adapter in multi-path devicesJames Bottomley1-5/+6
We have peculiar problems with multi-path and enclosures: physically, we know each bay can only be occupied by a single disk device. However in multi-path, it appears we have many (because each path to the device appears in Linux as a different kernel device). We try to fix this by only having the last seen device show up in the bay. Sysfs gets very annoyed if we try to manipulate links when the kobject sysfs directory (kobj.sd) doesn't exist and drops a huge WARN_ON which most users panic and report an oops for. This happens on a few path removal situations and IBM reports seeing it when one of their multi-path adapters is removed. Add a check to enclosure device removal for the existence the sysfs directory containing both the forward and back links so that the remnants (if any) get removed in either direction but no scary warnings are dumped. Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-03-25fs: move struct kiocb to fs.hChristoph Hellwig3-3/+0
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25misc: mic: fixup return type of wait_for_completion_timeoutNicholas Mc Guire1-7/+7
return type of wait_for_completion_timeout is unsigned long not int. The rc variable is renamed timeout to reflect its use and the type adjusted to unsigned long. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25misc: carma: fixup return type of wait_for_completion_timeoutNicholas Mc Guire1-4/+6
return type of wait_for_completion_timeout is unsigned long not int. The rc variable is renamed timeout to reflect its use and the type adjusted to unsigned long. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25misc: tifm: match return type of wait_for_completion_timeoutNicholas Mc Guire1-2/+3
return type of wait_for_completion_timeout is unsigned long not int. The rc variable is in use for other calls so an additional timeout variable of type unsigned long is added. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25mei: fix regression on NFC connectionTomas Winkler1-3/+1
In mei_host_client_init function we enable the all internal connected clients including NFC. This is done before we set the device to enabled state and let userspace call open. We need to check only for MEI_FILE_CONNECTED in mei_cl_is_connected in order to enable the communication with the clients before MEI_DEV_ENABLED is set. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25VMCI: Guard against overflow in queue pair allocationJorgen Hansen2-10/+23
The current maximum size of a queue in a queue pair is 128 MB. If we increase that in the future, the queue pair allocation routines may run into overflow issues. This change adds additional checks to guard against this. Acked-by: Andy King <acking@vmware.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25VMCI: Check userland-provided datagram sizeAndy King2-1/+7
Ensure that the size filled in by userland in the datagram header matches the size of the buffer passed down in the IOCTL. Note that we account for the size of the header itself in the check. Acked-by: Jorgen Hansen <jhansen@vmware.com> Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Reported-by: David Ramos <daramos@stanford.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25drivers/vmw_vmci: Show correct get_user_pages_fast upon failureDavidlohr Bueso1-2/+4
As of 240ddd495a9 (vmw_vmci: Convert driver to use get_user_pages_fast()) we no longer user get_user_pages(), thus update the warning. Also convert to pr_debug, which is a more appropriate level of logging. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-23x86/asm/entry: Change all 'user_mode_vm()' calls to 'user_mode()'Andy Lutomirski1-1/+1
user_mode_vm() and user_mode() are now the same. Change all callers of user_mode_vm() to user_mode(). The next patch will remove the definition of user_mode_vm. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/43b1f57f3df70df5a08b0925897c660725015554.1426728647.git.luto@kernel.org [ Merged to a more recent kernel. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-16misc: sram: switch to ioremap_wc from ioremapAbhilash Kesavan1-3/+14
Currently, the SRAM allocator returns device memory via ioremap. This causes issues on ARM64 when the internal SoC SRAM allocated by the generic sram driver is used for audio playback. The destination buffer address (which is ioremapped SRAM) is not 64-bit aligned for certain streams (e.g. 44.1k sampling rate). In such cases we get unhandled alignment faults. Use ioremap_wc in place of ioremap which gives us normal non-cacheable memory instead of device memory. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16misc: bh1780: Add module aliasesJean Delvare1-0/+2
The bh1780gli driver does not create an i2c module alias for the device it supports, preventing the driver from being loaded automatically when needed on non-OF/DT systems. Add it. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16misc: constify of_device_id arrayFabian Frederick5-5/+5
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09Merge 4.0-rc3 into char-misc-nextGreg Kroah-Hartman1-0/+2
We want the mei fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-04mei: trace: fix missing include to linux/device.hTomas Winkler1-0/+2
Fix warning (discovered using randconfig) drivers/misc/mei/mei-trace.h:30:24: warning: 'struct device' declared inside parameter list TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val), Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-04mei: free me client references on host initTomas Winkler1-0/+3
Fx fixes leak introduced by: commit b7d885145538 ("mei: revamp me clients list handling") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: bus: call device disable handler prior to disconnectionTomas Winkler1-14/+11
call device's disable handler prior to disconnection so it can possibly close the communication with fw client in graceful way Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: allow read concurrencyTomas Winkler8-119/+98
Replace clunky read state machine with read stack implemented as per client read list, this is important mostly for mei drivers with unsolicited reads Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: simplify io callback disposalTomas Winkler6-105/+63
Simplify disposal of io callback by removing the callback implicitly from its lookup list inside mei_io_cb_free Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: add mei_cl_alloc_linked functionTomas Winkler4-36/+61
Add convenient wrapper mei_cl_alloc_linked to simplify error handling Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: always initialize the callback with the intended operation typeTomas Winkler6-45/+55
We set the operation type at initialization time as each cb is used only for a single type of operation As a byproduct we add a convenient wrapper for allocating cb with the data buffer. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: use only one buffer in callbackTomas Winkler7-63/+31
The callback structure is used exclusively for reading or writing therefore there is no reason to hold both response and request buffers in the callback structure Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: use regular client read functionsTomas Winkler4-81/+35
Reduce code duplication in amthif by reusing regular client read functions. The change also removes the need for amthif own buffering Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: use client write functionsTomas Winkler4-139/+51
Reduce code duplication in amthif code by reusing regular client write functions. Add completed flag to cb so amthif client can add rx credits on write completion Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: send flow control as a regular clientTomas Winkler3-84/+77
Reuse common client mechanism for sending flow control hbm message. Add new function mei_amthif_read_start similar to mei_cl_read_start that puts control flow request onto the control write queue and drop mei_amthif_irq_read function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: remove useless iamthif_ioctl variableTomas Winkler3-11/+3
iamthif_ioctl is obsolete and can be safely dropped Currently it is set to true during driver runtime Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: fix device reset on mei_amthif_irq_read_msgTomas Winkler3-34/+51
On failure mei_amthif_irq_read_msg returns an error that will cause device reset but the issue is software one so instead we should propagate error to caller and just clean the read queues. As a side effect also removes useless BUG_ONs Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: fix device reset on mei_cl_irq_read_msg allocation failureTomas Winkler4-62/+80
On memory allocation failure mei_cl_irq_read_msg will return with error that will cause device reset. Instead we should propagate error to caller and just clean the read queues. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: fix function names and format in KDocAlexander Usyskin4-16/+17
Align functions names in KDoc with real ones. Fix comment format to be KDoc and fix wrong syntax there. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: me: change power gating function name conventionsAlexander Usyskin3-14/+14
The current power gating naming was confusing, we wish to swap meanings of register and flow level power gating terms, For registers writing level use terms set and unset: mei_me_pg_set, mei_me_pg_unset For flow/high level use power gating enter and power gating exit terms mei_me_pg_enter_sync, mei_me_pg_exit_sync Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: me: add io register tracingTomas Winkler4-4/+129
To make debugging a bit easier we add me register access tracing <debugfs>/tracing/events/mei/mei_reg_{read,write} Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: me: use io register wrappers consistentlyTomas Winkler1-57/+66
1. Use mei_device structure as the first argument to the io register access wrappers so we'll have access to the device structure needed for tracing. 2. Use wrapper consistently Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: revamp me clients list handlingTomas Winkler6-62/+162
1. Use rw lock to access the me_clients list 2. Reuse already defined find functions also when removing particular me client 3. Add wrappers for addition and deletion Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: make device disabled on stop unconditionallyAlexander Usyskin1-0/+2
Set the internal device state to to disabled after hardware reset in stop flow. This will cover cases when driver was not brought to disabled state because of an error and in stop flow we wish not to retry the reset. Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-15Merge tag 'char-misc-3.20-rc1' of ↵Linus Torvalds21-186/+418
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc patches from Greg KH: "Here's the big char/misc driver update for 3.20-rc1. Lots of little things in here, all described in the changelog. Nothing major or unusual, except maybe the binder selinux stuff, which was all acked by the proper selinux people and they thought it best to come through this tree. All of this has been in linux-next with no reported issues for a while" * tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) coresight: fix function etm_writel_cp14() parameter order coresight-etm: remove check for unknown Kconfig macro coresight: fixing CPU hwid lookup in device tree coresight: remove the unnecessary function coresight_is_bit_set() coresight: fix the debug AMBA bus name coresight: remove the extra spaces coresight: fix the link between orphan connection and newly added device coresight: remove the unnecessary replicator property coresight: fix the replicator subtype value pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl' mcb: Fix error path of mcb_pci_probe virtio/console: verify device has config space ti-st: clean up data types (fix harmless memory corruption) mei: me: release hw from reset only during the reset flow mei: mask interrupt set bit on clean reset bit extcon: max77693: Constify struct regmap_config extcon: adc-jack: Release IIO channel on driver remove extcon: Remove duplicated include from extcon-class.c Drivers: hv: vmbus: hv_process_timer_expiration() can be static Drivers: hv: vmbus: serialize Offer and Rescind offer ...
2015-02-11Merge tag 'powerpc-3.20-1' of ↵Linus Torvalds11-26/+898
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Update of all defconfigs - Addition of a bunch of config options to modernise our defconfigs - Some PS3 updates from Geoff - Optimised memcmp for 64 bit from Anton - Fix for kprobes that allows 'perf probe' to work from Naveen - Several cxl updates from Ian & Ryan - Expanded support for the '24x7' PMU from Cody & Sukadev - Freescale updates from Scott: "Highlights include 8xx optimizations, some more work on datapath device tree content, e300 machine check support, t1040 corenet error reporting, and various cleanups and fixes" * tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits) cxl: Add missing return statement after handling AFU errror cxl: Fail AFU initialisation if an invalid configuration record is found cxl: Export optional AFU configuration record in sysfs powerpc/mm: Warn on flushing tlb page in kernel context powerpc/powernv: Add OPAL soft-poweroff routine powerpc/perf/hv-24x7: Document sysfs event description entries powerpc/perf/hv-gpci: add the remaining gpci requests powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated powerpc/perf/hv-24x7: parse catalog and populate sysfs with events perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper perf: add PMU_EVENT_ATTR_STRING() helper perf: provide sysfs_show for struct perf_pmu_events_attr powerpc/kernel: Avoid initializing device-tree pointer twice powerpc: Remove old compile time disabled syscall tracing code powerpc/kernel: Make syscall_exit a local label cxl: Fix device_node reference counting powerpc/mm: bail out early when flushing TLB page powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80) perf/powerpc: reset event hw state when adding it to the PMU powerpc/qe: Use strlcpy() ...
2015-02-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-12/+96
Pull first round of SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas, megaraid_sas, ses) plus an assortment of minor updates. There's also an update to ufs which adds new phy drivers and finally a new logging infrastructure for SCSI" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits) scsi_logging: return void for dev_printk() functions scsi: print single-character strings with seq_putc scsi: merge consecutive seq_puts calls scsi: replace seq_printf with seq_puts aha152x: replace seq_printf with seq_puts advansys: replace seq_printf with seq_puts scsi: remove SPRINTF macro sg: remove an unused variable hpsa: Use local workqueues instead of system workqueues hpsa: add in P840ar controller model name hpsa: add in gen9 controller model names hpsa: detect and report failures changing controller transport modes hpsa: shorten the wait for the CISS doorbell mode change ack hpsa: refactor duplicated scan completion code into a new routine hpsa: move SG descriptor set-up out of hpsa_scatter_gather() hpsa: do not use function pointers in fast path command submission hpsa: print CDBs instead of kernel virtual addresses for uncommon errors hpsa: do not use a void pointer for scsi_cmd field of struct CommandList hpsa: return failed from device reset/abort handlers hpsa: check for ctlr lockup after command allocation in main io path ...
2015-02-06cxl: Add missing return statement after handling AFU errrorIan Munsie1-0/+1
We were missing a return statement in the PSL interrupt handler in the case of an AFU error, which would trigger an "Unhandled CXL PSL IRQ" warning. We do actually handle these type of errors (by notifying userspace), so add the missing return IRQ_HANDLED so we don't throw unecessary warnings. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>