summaryrefslogtreecommitdiffstats
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2009-10-04max6875: Discard obsolete detect methodJean Delvare1-24/+5
There is no point in implementing a detect callback for the MAX6875, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This basically divides the binary module size by 2. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Gardner <gardner.ben@gmail.com>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan2-3/+2
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27const: mark struct vm_struct_operationsAlexey Dobriyan2-2/+2
* mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24gru: allocation may fail in quicktest1()Roel Kluin1-0/+2
The allocation may fail. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24gru: use proc_create()Alexey Dobriyan1-2/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23spi: prefix modalias with "spi:"Anton Vorontsov1-1/+1
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23kprobes: use do_IRQ() in lkdtmM. Mohan Kumar1-1/+1
Current lkdtm code puts a probe on __do_IRQ for some of the kdump test cases. Since __do_IRQ is deprecated, change lkdtm code to use do_IRQ function. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22const: mark remaining super_operations constAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-18Merge branch 'release' of ↵Linus Torvalds1-19/+21
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Clean up linker script using standard macros. [IA64] Use standard macros for page-aligned data. [IA64] Use .ref.text, not .text.init for start_ap. [IA64] sgi-xp: fix printk format warnings [IA64] ioc4_serial: fix printk format warnings [IA64] mbcs: fix printk format warnings [IA64] pci_br, fix infinite loop in find_free_ate() [IA64] kdump: Short path to freeze CPUs [IA64] kdump: Try INIT regardless of [IA64] kdump: Mask INIT first in panic-kdump path [IA64] kdump: Don't return APs to SAL from kdump [IA64] kexec: Unregister MCA handler before kexec [IA64] kexec: Make INIT safe while transition to [IA64] kdump: Mask MCA/INIT on frozen cpus Fix up conflict in arch/ia64/kernel/vmlinux.lds.S as per Tony's suggestion.
2009-09-15hpilo: add poll f_opDavid Altobelli1-1/+41
Add poll handler to hpilo, to allow applications a low overhead method of waiting for data. Signed-off-by: David Altobelli <david.altobelli@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15hpilo: add interrupt handlerDavid Altobelli2-45/+101
Add interrupt handler to hpilo. This is enablement for poll handler, and it also simplifies the logic for handling an iLO reset, because now only the interrupt handler needs to look for reset, the file system interfaces only need to return failure when a reset has happened. Signed-off-by: David Altobelli <david.altobelli@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15hpilo: staging for interrupt handlingDavid Altobelli1-47/+73
Refactor some hpilo routines in order to allow for locking changes in interrupt handling. Should not be functionally different. Signed-off-by: David Altobelli <david.altobelli@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15driver model: constify attribute groupsDavid Brownell1-2/+2
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15[IA64] sgi-xp: fix printk format warningsRandy Dunlap1-19/+21
Fix warnings in SGI XPC sn2 driver: lots of printk format warnings and: drivers/misc/sgi-xp/xpc_sn2.c: In function 'xpc_get_partition_rsvd_page_pa_sn2': drivers/misc/sgi-xp/xpc_sn2.c:618: warning: passing argument 3 of 'sn_partition_reserved_page_pa' from incompatible pointer type drivers/misc/sgi-xp/xpc_sn2.c:618: warning: passing argument 4 of 'sn_partition_reserved_page_pa' from incompatible pointer type (likely due to generic u64 / long long changes) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-20/+49
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (209 commits) [SCSI] fix oops during scsi scanning [SCSI] libsrp: fix memory leak in srp_ring_free() [SCSI] libiscsi, bnx2i: make bound ep check common [SCSI] libiscsi: add completion function for drivers that do not need pdu processing [SCSI] scsi_dh_rdac: changes for rdac debug logging [SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization [SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach [SCSI] sg: fix oops in the error path in sg_build_indirect() [SCSI] mptsas : Bump version to 3.04.12 [SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command [SCSI] mptsas : Send DID_NO_CONNECT for pending IOs of removed device [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic [SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off [SCSI] mptsas : Sanity check for phyinfo is added [SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530 [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller [SCSI] qla2xxx: Update version number to 8.03.01-k6. [SCSI] qla2xxx: Properly delete rports attached to a vport. [SCSI] qla2xxx: Correct various NPIV issues. [SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly. ...
2009-09-14Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds3-0/+398
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits) [ARM] Update mach-types ARM: 5636/1: Move vendor enum to AMBA include ARM: Fix pfn_valid() for sparse memory [ARM] orion5x: Add LaCie NAS 2Big Network support [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board ARM: 5689/1: Update default config of HP Jornada 700-series machines ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem ARM: 5688/1: ks8695_serial: disable_irq() lockup ARM: 5687/1: fix an oops with highmem ARM: 5684/1: Add nuc960 platform to w90x900 ARM: 5683/1: Add nuc950 platform to w90x900 ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver ARM: 5625/1: fix hard coded 4K resource size in amba bus detection MMC: MMCI: convert realview MMC to use gpiolib ARM: 5685/1: Make MMCI driver compile without gpiolib ARM: implement highpte ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ ... Fix up trivial conflict in arch/arm/kernel/signal.c. It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.
2009-09-12Merge branch 'devel-stable' into develRussell King4-8/+2
Conflicts: MAINTAINERS arch/arm/mm/fault.c
2009-09-12Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and ↵Russell King4-2/+400
'w90x900' into devel
2009-09-02drivers: Kill now superfluous ->last_rx storesEric Dumazet1-1/+0
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-22[SCSI] ses: update enclosure data on hot addJames Bottomley1-0/+3
Now that hot add works correctly, if a new device is added, we're still operating on stale enclosure data, so fix that by updating the enclosure diagnostic pages when we get notified of a device hot add Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] ses: add support for enclosure component hot removalJames Bottomley1-8/+14
Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] ses: fix hotplug with multiple devices and expandersJames Bottomley1-12/+32
In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-12Merge branch 'master' of ↵David S. Miller5-10/+4
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-07-31cb710: use SG_MITER_TO_SG/SG_MITER_FROM_SGSebastian Andrzej Siewior1-4/+0
the code allready uses flush_kernel_dcache_page(). This patch updates the driver to the recent sg API changes which require that either SG_MITER_TO_SG or SG_MITER_FROM_SG is set. SG_MITER_TO_SG calls flush_kernel_dcache_page() in sg_mitter_stop() Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-07-30ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driverHartley Sweeten3-0/+398
The EP93xx features two PWMs (one on the EP9307) with the following features: * Configurable dual output * Separate input clocks for each PWM output * 16-bit resolution * Programmable pulse width (duty cycle), interval (frequency), and polarity This adds the necessary core support as well as the driver. A sysfs interface is provided to control the PWM outputs. Signed-off-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-29eeprom/at25: bugfix "not ready" timeout after writeSebastian Heutling1-2/+2
Under certain circumstances msleep(1) within the loop, which waits for the EEPROM to be finished, might take longer than the timeout. On the next loop the status register might now return to be ready and therefore the loop finishes. The following check now tests if a timeout occurred and if so returns an error although the device reported it was ready. This fix replaces testing the occurrence of the timeout by testing the "not ready" bit in the status register. Signed-off-by: Sebastian Heutling <heutling@who-ing.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan2-2/+0
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08Remove multiple KERN_ prefixes from printk formatsJoe Perches1-2/+2
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy1-2/+2
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18gru: copyright fixesJack Steiner2-8/+28
Fix the copyright statements in a couple of GRU files. No functional changes are being made. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: remove references to the obsolete global status handleJack Steiner1-2/+0
Delete references to the SGI GRU GSH hardware resources. These GRU resources have been deleted from the hardware. (These resources have never benn used, anyway). Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fixes to grudump utilityJack Steiner2-4/+8
Minor fixes to the SGI GRU grudump facility: - fix address where user data is written - add gru number to data passed to user - indicate if context is locked Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fix potential use-after-free when purging GRU tlbsJack Steiner1-1/+3
Fix potential SGI GRU bug that could cause a use-after-free. If one thread in a task is flushing the GRU and another thread destroys the GRU context, there is the potential to access a table after it has been freed. Copy the gms pointer to a local variable before unlocking the gts table. Note that no refcnt is needed for the gms - the reference is held indirectly by the task's mm_struct. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: add user request to specify gru sliceJack Steiner4-1/+13
Add a user request to specify the gru instruction slice parameter for user contexts. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: generic infrastructure for context optionsJack Steiner5-13/+35
Change the user GRU request for specifying the "task_slice" option to use a generic infrastructure that can be expanded in the future to include additional context options. No new capabilities are added with this patch. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: cleanup gru inline functionsJack Steiner1-17/+16
Cleanup of GRU inline functions to eliminate unnecessary inline code. Update function descriptions. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: delete user request for fetching chiplet statusJack Steiner2-41/+0
Delete the user request for fetching the status of a GRU chiplet. This request has been made obsolete by other changes. Note: this is not a change to a user API - there are no compatibility issues with this change. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: collect per-context user statisticsJack Steiner5-0/+52
Collect GRU statistics for each user GRU context. Statistics are kept for TLB misses & content resource contention. Add user request for retrieving the statistics. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fix automatic retry of gru instruction failuresJack Steiner1-3/+2
Fix bug in automatic retry of GRU instruction failures. CBR substatus (message queue failure) was being checked incorrectly. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: add user request to explicitly unload a gru contextJack Steiner3-28/+41
Add user function to explicitly unload GRU kernel contexts from the GRU. Only contexts that are not in-use will be unloaded. This function is primarily for testing. It is not expected that this will be used in normal production systems. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fix cache coherency issues with instruction retryJack Steiner4-4/+14
Fix two problems related to GRU instruction failures. Cache coherency is not maintained for CBEs except when loading or unloading contexts. When reading a CBE to extract error information, the CBE must first be flushed from the cache. The function that reads kerrnel CBEs was reading the wrong CBE. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: update to rev 0.9 of gru specJack Steiner6-11/+24
Update GRU driver to the latest version of the GRU spec. This consists of minor updates: - changes & additions to error status bits - new restriction on handling of TLB misses while in FMM mode - new field (not used by software) in TFH Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: update gru kernel self testsJack Steiner4-16/+142
Change the kernel self tests that can be optionally executed on GRU initialization. This is primarily for testing. Eliminate the BUG statements on failure and return bad status. Add ioctl interface to execute the tests on demand. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: support for asynchronous gru instructionsJack Steiner3-20/+213
Add support for asynchronous GRU instructions. Currently, asynchronous instructions are supported only for GRU instructions issued by the kernel. [akpm@linux-foundation.org: build fix] Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: support instruction completion interruptsJack Steiner3-7/+29
Add support for interrupts generated by GRU instruction completion. Previously, the only interrupts were for TLB misses. The hardware also supports interrupts on instruction completion. This will be supported for instructions issued by the kernel. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: check context state on reloadJack Steiner2-9/+25
Check whether the gru state being loaded into a gru is from a new context or a previously unloaded context. If new, simply zero out the hardware context; if unloaded and valid, reload the old state. This change is primarily for reloading kernel contexts where the previous is not required to be saved. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: fix handling of mesq failuresJack Steiner1-9/+24
Fix endcase in handling GRU message queue failures due to NACKs of PUT requests. Must ensure that the "present" bits are cleared before resending the message. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: support contexts with zero dsrs or cbrsJack Steiner2-6/+4
Support alocation of GRU contexts that contain zero DSR or CBR resources. Some instructions do not require DSR resources. Contexts without CBR resources are useful for diagnostics. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: change resource assignment for kernel threadsJack Steiner6-105/+184
Change the way GRU resources are assigned for kernel threads. GRU contexts for kernel threads are now allocated on demand and can be stolen by user processes when idle. This allows MPI jobs to use ALL of the GRU resources when the kernel is not using them. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gru: support cch_allocate for kernel threadsJack Steiner4-19/+17
Change the interface to cch_allocate so that it can be used to allocate GRU contexts for kernel threads. Kernel threads use the GRU in unmapped mode and do not require ASIDs for the GRU TLB. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 07:41:09 +0000