summaryrefslogtreecommitdiffstats
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2015-03-16misc: sram: switch to ioremap_wc from ioremapAbhilash Kesavan1-3/+14
Currently, the SRAM allocator returns device memory via ioremap. This causes issues on ARM64 when the internal SoC SRAM allocated by the generic sram driver is used for audio playback. The destination buffer address (which is ioremapped SRAM) is not 64-bit aligned for certain streams (e.g. 44.1k sampling rate). In such cases we get unhandled alignment faults. Use ioremap_wc in place of ioremap which gives us normal non-cacheable memory instead of device memory. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16misc: bh1780: Add module aliasesJean Delvare1-0/+2
The bh1780gli driver does not create an i2c module alias for the device it supports, preventing the driver from being loaded automatically when needed on non-OF/DT systems. Add it. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16misc: constify of_device_id arrayFabian Frederick5-5/+5
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09Merge 4.0-rc3 into char-misc-nextGreg Kroah-Hartman1-0/+2
We want the mei fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-04mei: trace: fix missing include to linux/device.hTomas Winkler1-0/+2
Fix warning (discovered using randconfig) drivers/misc/mei/mei-trace.h:30:24: warning: 'struct device' declared inside parameter list TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val), Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-04mei: free me client references on host initTomas Winkler1-0/+3
Fx fixes leak introduced by: commit b7d885145538 ("mei: revamp me clients list handling") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: bus: call device disable handler prior to disconnectionTomas Winkler1-14/+11
call device's disable handler prior to disconnection so it can possibly close the communication with fw client in graceful way Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: allow read concurrencyTomas Winkler8-119/+98
Replace clunky read state machine with read stack implemented as per client read list, this is important mostly for mei drivers with unsolicited reads Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: simplify io callback disposalTomas Winkler6-105/+63
Simplify disposal of io callback by removing the callback implicitly from its lookup list inside mei_io_cb_free Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: add mei_cl_alloc_linked functionTomas Winkler4-36/+61
Add convenient wrapper mei_cl_alloc_linked to simplify error handling Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: always initialize the callback with the intended operation typeTomas Winkler6-45/+55
We set the operation type at initialization time as each cb is used only for a single type of operation As a byproduct we add a convenient wrapper for allocating cb with the data buffer. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: use only one buffer in callbackTomas Winkler7-63/+31
The callback structure is used exclusively for reading or writing therefore there is no reason to hold both response and request buffers in the callback structure Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: use regular client read functionsTomas Winkler4-81/+35
Reduce code duplication in amthif by reusing regular client read functions. The change also removes the need for amthif own buffering Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: use client write functionsTomas Winkler4-139/+51
Reduce code duplication in amthif code by reusing regular client write functions. Add completed flag to cb so amthif client can add rx credits on write completion Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: send flow control as a regular clientTomas Winkler3-84/+77
Reuse common client mechanism for sending flow control hbm message. Add new function mei_amthif_read_start similar to mei_cl_read_start that puts control flow request onto the control write queue and drop mei_amthif_irq_read function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: remove useless iamthif_ioctl variableTomas Winkler3-11/+3
iamthif_ioctl is obsolete and can be safely dropped Currently it is set to true during driver runtime Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: iamthif: fix device reset on mei_amthif_irq_read_msgTomas Winkler3-34/+51
On failure mei_amthif_irq_read_msg returns an error that will cause device reset but the issue is software one so instead we should propagate error to caller and just clean the read queues. As a side effect also removes useless BUG_ONs Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: fix device reset on mei_cl_irq_read_msg allocation failureTomas Winkler4-62/+80
On memory allocation failure mei_cl_irq_read_msg will return with error that will cause device reset. Instead we should propagate error to caller and just clean the read queues. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: fix function names and format in KDocAlexander Usyskin4-16/+17
Align functions names in KDoc with real ones. Fix comment format to be KDoc and fix wrong syntax there. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: me: change power gating function name conventionsAlexander Usyskin3-14/+14
The current power gating naming was confusing, we wish to swap meanings of register and flow level power gating terms, For registers writing level use terms set and unset: mei_me_pg_set, mei_me_pg_unset For flow/high level use power gating enter and power gating exit terms mei_me_pg_enter_sync, mei_me_pg_exit_sync Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: me: add io register tracingTomas Winkler4-4/+129
To make debugging a bit easier we add me register access tracing <debugfs>/tracing/events/mei/mei_reg_{read,write} Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: me: use io register wrappers consistentlyTomas Winkler1-57/+66
1. Use mei_device structure as the first argument to the io register access wrappers so we'll have access to the device structure needed for tracing. 2. Use wrapper consistently Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: revamp me clients list handlingTomas Winkler6-62/+162
1. Use rw lock to access the me_clients list 2. Reuse already defined find functions also when removing particular me client 3. Add wrappers for addition and deletion Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: make device disabled on stop unconditionallyAlexander Usyskin1-0/+2
Set the internal device state to to disabled after hardware reset in stop flow. This will cover cases when driver was not brought to disabled state because of an error and in stop flow we wish not to retry the reset. Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-15Merge tag 'char-misc-3.20-rc1' of ↵Linus Torvalds21-186/+418
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc patches from Greg KH: "Here's the big char/misc driver update for 3.20-rc1. Lots of little things in here, all described in the changelog. Nothing major or unusual, except maybe the binder selinux stuff, which was all acked by the proper selinux people and they thought it best to come through this tree. All of this has been in linux-next with no reported issues for a while" * tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) coresight: fix function etm_writel_cp14() parameter order coresight-etm: remove check for unknown Kconfig macro coresight: fixing CPU hwid lookup in device tree coresight: remove the unnecessary function coresight_is_bit_set() coresight: fix the debug AMBA bus name coresight: remove the extra spaces coresight: fix the link between orphan connection and newly added device coresight: remove the unnecessary replicator property coresight: fix the replicator subtype value pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl' mcb: Fix error path of mcb_pci_probe virtio/console: verify device has config space ti-st: clean up data types (fix harmless memory corruption) mei: me: release hw from reset only during the reset flow mei: mask interrupt set bit on clean reset bit extcon: max77693: Constify struct regmap_config extcon: adc-jack: Release IIO channel on driver remove extcon: Remove duplicated include from extcon-class.c Drivers: hv: vmbus: hv_process_timer_expiration() can be static Drivers: hv: vmbus: serialize Offer and Rescind offer ...
2015-02-11Merge tag 'powerpc-3.20-1' of ↵Linus Torvalds11-26/+898
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Update of all defconfigs - Addition of a bunch of config options to modernise our defconfigs - Some PS3 updates from Geoff - Optimised memcmp for 64 bit from Anton - Fix for kprobes that allows 'perf probe' to work from Naveen - Several cxl updates from Ian & Ryan - Expanded support for the '24x7' PMU from Cody & Sukadev - Freescale updates from Scott: "Highlights include 8xx optimizations, some more work on datapath device tree content, e300 machine check support, t1040 corenet error reporting, and various cleanups and fixes" * tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits) cxl: Add missing return statement after handling AFU errror cxl: Fail AFU initialisation if an invalid configuration record is found cxl: Export optional AFU configuration record in sysfs powerpc/mm: Warn on flushing tlb page in kernel context powerpc/powernv: Add OPAL soft-poweroff routine powerpc/perf/hv-24x7: Document sysfs event description entries powerpc/perf/hv-gpci: add the remaining gpci requests powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated powerpc/perf/hv-24x7: parse catalog and populate sysfs with events perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper perf: add PMU_EVENT_ATTR_STRING() helper perf: provide sysfs_show for struct perf_pmu_events_attr powerpc/kernel: Avoid initializing device-tree pointer twice powerpc: Remove old compile time disabled syscall tracing code powerpc/kernel: Make syscall_exit a local label cxl: Fix device_node reference counting powerpc/mm: bail out early when flushing TLB page powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80) perf/powerpc: reset event hw state when adding it to the PMU powerpc/qe: Use strlcpy() ...
2015-02-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-12/+96
Pull first round of SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas, megaraid_sas, ses) plus an assortment of minor updates. There's also an update to ufs which adds new phy drivers and finally a new logging infrastructure for SCSI" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits) scsi_logging: return void for dev_printk() functions scsi: print single-character strings with seq_putc scsi: merge consecutive seq_puts calls scsi: replace seq_printf with seq_puts aha152x: replace seq_printf with seq_puts advansys: replace seq_printf with seq_puts scsi: remove SPRINTF macro sg: remove an unused variable hpsa: Use local workqueues instead of system workqueues hpsa: add in P840ar controller model name hpsa: add in gen9 controller model names hpsa: detect and report failures changing controller transport modes hpsa: shorten the wait for the CISS doorbell mode change ack hpsa: refactor duplicated scan completion code into a new routine hpsa: move SG descriptor set-up out of hpsa_scatter_gather() hpsa: do not use function pointers in fast path command submission hpsa: print CDBs instead of kernel virtual addresses for uncommon errors hpsa: do not use a void pointer for scsi_cmd field of struct CommandList hpsa: return failed from device reset/abort handlers hpsa: check for ctlr lockup after command allocation in main io path ...
2015-02-06cxl: Add missing return statement after handling AFU errrorIan Munsie1-0/+1
We were missing a return statement in the PSL interrupt handler in the case of an AFU error, which would trigger an "Unhandled CXL PSL IRQ" warning. We do actually handle these type of errors (by notifying userspace), so add the missing return IRQ_HANDLED so we don't throw unecessary warnings. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-02-06cxl: Fail AFU initialisation if an invalid configuration record is foundIan Munsie1-0/+9
If an AFU claims to have a configuration record but doesn't actually contain a vendor and device ID, fail the AFU initialisation. Right now this is just a way of politely letting AFU developers know that they need to fix their config space, but later on we may expose the AFUs as actual PCI devices in their own right and don't want to inadvertendly expose an AFU with a bad config space. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-02-06cxl: Export optional AFU configuration record in sysfsIan Munsie3-10/+205
An AFU may optionally contain one or more PCIe like configuration records, which can be used to identify the AFU. This patch adds support for exposing the raw config space and the vendor, device and class code under sysfs. These will appear in a subdirectory of the AFU device corresponding with the configuration record number, e.g. cat /sys/class/cxl/afu0.0/cr0/vendor 0x1014 cat /sys/class/cxl/afu0.0/cr0/device 0x4350 cat /sys/class/cxl/afu0.0/cr0/class 0x120000 hexdump -C /sys/class/cxl/afu0.0/cr0/config 00000000 14 10 50 43 00 00 00 00 06 00 00 12 00 00 00 00 |..PC............| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000100 These files behave in much the same way as the equivalent files for PCI devices, with one exception being that the config file is currently read-only and restricted to the root user. It is not necessarily required to be this strict, but we currently do not have a compelling use-case to make it writable and/or world-readable, so I erred on the side of being restrictive. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-02-04vmci: propagate msghdr all way down to __qp_memcpy_to_queue()Al Viro1-8/+8
Switch from passing msg->iov_iter.iov to passing msg itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-03ti-st: clean up data types (fix harmless memory corruption)Dan Carpenter1-6/+6
The big issue here is: of_property_read_u32(np, "flow_cntrl", (u32 *)&dt_pdata->flow_cntrl); "->flow_cntrl" is a char so when we write a 32 bit number to it then it corrupts past the end of the char. It's probably hard to notice because the struct has padding so the code works on little endian systems. But on a big endian system the code would fail and on a 64 bit, big endian systems then "nshutdown_gpio" and "baud_rate" would be buggy as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03mei: me: release hw from reset only during the reset flowAlexander Usyskin1-2/+1
We might enter the interrupt handler with hw_ready already set, but prior we actually started the reset flow. To soleve this we move the reset release from the interrupt handler to the HW start wait function which is part of the reset sequence. Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03mei: mask interrupt set bit on clean reset bitAlexander Usyskin1-1/+1
We should mask interrupt set bit when writing back hcsr value in reset bit clean-up. This is refinement for mei: clean reset bit before reset commit b13a65ef190e488e2761d65bdd2e1fe8a3a125f5 Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02cxl: Fix device_node reference countingRyan Grimm1-1/+1
When unbinding and rebinding the driver on a system with a card in PHB0, this error condition is reached after a few attempts: ERROR: Bad of_node_put() on /pciex@3fffe40000000 CPU: 0 PID: 3040 Comm: bash Not tainted 3.18.0-rc3-12545-g3627ffe #152 Call Trace: [c000000721acb5c0] [c00000000086ef94] .dump_stack+0x84/0xb0 (unreliable) [c000000721acb640] [c00000000073a0a8] .of_node_release+0xd8/0xe0 [c000000721acb6d0] [c00000000044bc44] .kobject_release+0x74/0xe0 [c000000721acb760] [c0000000007394fc] .of_node_put+0x1c/0x30 [c000000721acb7d0] [c000000000545cd8] .cxl_probe+0x1a98/0x1d50 [c000000721acb900] [c0000000004845a0] .local_pci_probe+0x40/0xc0 [c000000721acb980] [c000000000484998] .pci_device_probe+0x128/0x170 [c000000721acba30] [c00000000052400c] .driver_probe_device+0xac/0x2a0 [c000000721acbad0] [c000000000522468] .bind_store+0x108/0x160 [c000000721acbb70] [c000000000521448] .drv_attr_store+0x38/0x60 [c000000721acbbe0] [c000000000293840] .sysfs_kf_write+0x60/0xa0 [c000000721acbc50] [c000000000292500] .kernfs_fop_write+0x140/0x1d0 [c000000721acbcf0] [c000000000208648] .vfs_write+0xd8/0x260 [c000000721acbd90] [c000000000208b18] .SyS_write+0x58/0x100 [c000000721acbe30] [c000000000009258] syscall_exit+0x0/0x98 We are missing a call to of_node_get(). pnv_pci_to_phb_node() should call of_node_get() otherwise np's reference count isn't incremented and it might go away. Rename pnv_pci_to_phb_node() to pnv_pci_get_phb_node() so it's clear it calls of_node_get(). Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-25VMCI: Fix two UVA mapping bugsJorgen Hansen2-7/+8
(this is a resend of this patch. Originally sent last year, but post appears to have been lost) This change fixes two bugs in the VMCI host driver related to mapping the notify boolean from user space into kernel space: - the actual UVA was rounded up to the next page boundary - resulting in memory corruption in the calling process whenever notifications would be signalled. This has been fixed by just removing the PAGE_ALIGN part, since get_user_pages_fast can figure this out on its own - the mapped page wasn't stored anywhere, so it wasn't unmapped and put back when a VMCI context was destroyed. Fixed this by remembering the page. Acked-by: Andy King <acking@vmware.com> Acked-by: Darius Davis <darius@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25misc: ti-st: add handling of the signal caseNicholas Mc Guire1-8/+11
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Only the timeout case was being handled, the signal case (-ERESTARTSYS) was treated just like the case of successful completion, which is most likely not reasonable. read_local_version() is called from download_firmware() where it checks for !=0 return, so the error handling logic should be preserved correctly. download_firmware() is called from st_kim_start() which is checking for !=0 return, so the error handling logic should be preserved correctly Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25mei: add reference counting for me clientsTomas Winkler10-94/+221
To support dynamic addition and removal of me clients we add reference counter. Update kdoc with locking requirements. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-22cxl: Add ability to reset the cardRyan Grimm3-0/+56
Adds reset to sysfs which will PERST the card. If load_image_on_perst is set to "user" or "factory", the PERST will cause that image to be loaded. load_image_on_perst is set to "user" for production. "none" could be used for debugging. The PSL trace arrays are preserved which then can be read through debugfs. PERST also triggers CAPP recovery. An HMI comes in, which is handled by EEH. EEH unbinds the driver, calls into Sapphire to reinitialize the PHB, then rebinds the driver. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Enable CAPP recoveryRyan Grimm1-1/+7
Turning snoops on is the last step in CAPP recovery. Sapphire is expected to have reinitialized the PHB and done the previous recovery steps. Add mode argument to opal call to do this. Driver can turn snoops off although it does not currently. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Add image control to sysfsRyan Grimm1-0/+39
load_image_on_perst identifies whether a PERST will cause the image to be flashed to the card. And if so, which image. Valid entries are: "none", "user" and "factory". A value of "none" means PERST will not cause the image to be flashed. A power cycle to the pcie slot is required to load the image. "user" loads the user provided image and "factory" loads the factory image upon PERST. sysfs updates the cxl struct in the driver then calls cxl_update_image_control to write the vals in the VSEC. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Use image state defaults for reloading FPGARyan Grimm2-2/+41
Select defaults such that a PERST causes flash image reload. Select which image based on what the card is set up to load. CXL_VSEC_PERST_LOADS_IMAGE selects whether PERST assertion causes flash image load. CXL_VSEC_PERST_SELECT_USER selects which image is loaded on the next PERST. cxl_update_image_control writes these bits into the VSEC. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Add tracepointsIan Munsie8-9/+520
This patch adds tracepoints throughout the cxl driver, which can provide insight into: - Context lifetimes - Commands sent to the PSL and AFU and their completion status - Segment and page table misses and their resolution - PSL and AFU interrupts - slbia calls from the powerpc copro_fault code These tracepoints are mostly intended to aid in debugging (particularly for new AFU designs), and may be useful standalone or in conjunction with hardware traces collected by the PSL (read out via the trace interface in debugfs) and AFUs. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: remove redundant increment of hwirqColin Ian King1-1/+1
hwirq has not been initialized, however it is being incremented and also not being referenced in a loop. This error was detected with cppcheck: [drivers/misc/cxl/irq.c:439]: (error) Uninitialized variable: hwirq Commit 80fa93fce37d ("cxl: Name interrupts in /proc/interrupt") introduced this error. This is a simple fix that removes the redundant increment. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-By: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-19Merge 3.19-rc5 into char-misc-nextGreg Kroah-Hartman3-25/+83
We want the 3.19-rc5 fixes in here for our testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-17Merge tag 'char-misc-3.19-rc5' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are three small driver fixes for reported issues for 3.19-rc5. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0 mei: add ABI documentation for fw_status exported through sysfs mei: clean reset bit before reset
2015-01-12ad525x_dpot-spi: Added Blank lines after declarationsMohammad Jamal1-0/+4
This patch solves the blank line warning of checkpatch.pl Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12ad525x_dpot:Remove break after returnMohammad Jamal1-6/+0
This patch removes the break statements present after return Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12ad525x_dpot: Add a blank line after declarationMohammad Jamal1-0/+1
Added a blank line after declaration to fix the warning of checkpatch.pl Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12GenWQE: remove unnecessary version.h inclusionFabian Frederick2-2/+0
Based on versioncheck. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-17 12:21:56 +0000