summaryrefslogtreecommitdiffstats
path: root/drivers/misc/ti-st
AgeCommit message (Collapse)AuthorFilesLines
2018-12-06misc: ti-st: make array read_ver_cmd static, shrinks object sizeColin Ian King1-1/+1
Don't populate the const array read_ver_cmd on the stack but instead make it static. Makes the object code smaller by 42 bytes: Before: text data bss dec hex filename 17262 6928 192 24382 5f3e drivers/misc/ti-st/st_kim.o After: text data bss dec hex filename 17156 6992 192 24340 5f14 drivers/misc/ti-st/st_kim.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06misc: remove GENWQE_DEBUGFS_RO()Yangtao Li1-28/+6
We already have the DEFINE_SHOW_ATTRIBUTE.There is no need to define such a macro,so remove GENWQE_DEBUGFS_RO.Also use DEFINE_SHOW_ATTRIBUTE to simplify some code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02misc: ti-st: Fix memory leak in the error path of probe()Anton Vasilyev1-2/+2
Free resources instead of direct return of the error code if kim_probe fails. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07misc: ti-st: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-1/+2
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03misc: ti-st: remove redundant variable 'type'Colin Ian King1-2/+1
Variable type is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'type' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23misc: ti-st: Replace GFP_ATOMIC with GFP_KERNEL in kim_probeJia-Ju Bai1-1/+1
kim_probe() is never called in atomic context. This function is only set as ".probe" in struct platform_driver. Despite never getting called from atomic context, kim_probe() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28misc: ti-st: constify attribute_group structures.Arvind Yadav1-1/+1
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg2-2/+2
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-17drivers: misc: ti-st: Use int instead of fuzzy char for callback statusGeert Uytterhoeven1-1/+1
On mips and parisc: drivers/bluetooth/btwilink.c: In function 'ti_st_open': drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow] hst->reg_status = -EINPROGRESS; drivers/nfc/nfcwilink.c: In function 'nfcwilink_open': drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow] drv->st_register_cb_status = -EINPROGRESS; There are actually two issues: 1. Whether "char" is signed or unsigned depends on the architecture. As the completion callback data is used to pass a (negative) error code, it should always be signed. 2. EINPROGRESS is 150 on mips, 245 on parisc. Hence -EINPROGRESS doesn't fit in a signed 8-bit number. Change the callback status from "char" to "int" to fix these. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-01ti-st: Fix complete_all() wrong usageDaniel Wagner1-1/+0
complete_all() should only be called once, doing it twice is a clear bug. 8565adbc8214 ("drivers/misc/ti-st: fix read fw version cmd") added the additional complete_all() call. Since we call complete_all() when leaving the function we can drop the complete_all() call inside true branch of the if statement. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Pavan Savoy <pavan_savoy@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07misc: st_core: remove unreachable codeSudip Mukherjee1-1/+0
The pr_debug() will never be executed. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-20ti-st: use worker instead of calling st_int_write in wake upMuhammad Hamza Farooq1-2/+16
The wake up method is called with the port lock held. The st_int_write method calls port->ops->write with tries to acquire the lock again, causing CPU to wait infinitely. Right way to do is to write data to port in worker thread. Signed-off-by: Muhammad Hamza Farooq <mfarooq@visteon.com> Signed-off-by: Jacob Siverskog <jacob@teenage.engineering> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05ti-st: st_kim: use gpio_set_value_cansleep to fix warningJürg Billeter1-5/+5
GPIO accessor functions may sleep. Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05Revert "ti-st: add device tree support"Rob Herring2-102/+9
This reverts commit 46d0d33350e9b32642d745a8b46a954910196b4d. This binding is horrible and never should have been merged. It is not documented nor are there any in tree users, so reverting it will not break anything we care about. Lets revert it before we do have users. The problems with it are: - It is not documented. - The GPIO connection is described with a custom property and uses Linux GPIO numbering. - The UART connection is described using the Linux tty device name. Cc: Gigi Joseph <gigi.joseph@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27misc: Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24ti-st: handle null allocation return correctly.Colin Ian King1-2/+1
static analysis with smatch picked up the following error: get_platform_data() error: potential null dereference 'dt_pdata'. (kzalloc returns null) Instead, the code should return NULL to avoid the following null pointer deference. Also, remove the error message as it is redundant, the caller emits an error message to alert of a failure anyhow. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03ti-st: clean up data types (fix harmless memory corruption)Dan Carpenter1-6/+6
The big issue here is: of_property_read_u32(np, "flow_cntrl", (u32 *)&dt_pdata->flow_cntrl); "->flow_cntrl" is a char so when we write a 32 bit number to it then it corrupts past the end of the char. It's probably hard to notice because the struct has padding so the code works on little endian systems. But on a big endian system the code would fail and on a 64 bit, big endian systems then "nshutdown_gpio" and "baud_rate" would be buggy as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25misc: ti-st: add handling of the signal caseNicholas Mc Guire1-8/+11
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Only the timeout case was being handled, the signal case (-ERESTARTSYS) was treated just like the case of successful completion, which is most likely not reasonable. read_local_version() is called from download_firmware() where it checks for !=0 return, so the error handling logic should be preserved correctly. download_firmware() is called from st_kim_start() which is checking for !=0 return, so the error handling logic should be preserved correctly Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12drivers:misc:ti-st: protect against bad packetsGigi Joseph1-6/+18
We encounter situations where we got bad packet type from the UART (probably due to platform problem or UART driver issues) which caused us out of boundary array access, which eventually led to kernel panic. Signed-off-by: Amir Ayun <amira@ti.com> Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Leonid Iziumtsev <x0153368@ti.com> Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12drivers: misc: ti-st: fix null pointer exception in st_kim_ref()Gigi Joseph1-4/+8
st_kim_ref() does not take care of the fact that platform_get_drvdata() might return NULL. On AM437x EVM, this causes the platform to stop booting as soon as the module is inserted. This patch fixes the issue by checking for NULL return value. Oops log follows. I have not tested BT functionality after this patch. But at least the platform boots now. [ 12.675697] Unable to handle kernel NULL pointer dereference at virtual address 0000005c [ 12.684310] pgd = c0004000 [ 12.687157] [0000005c] *pgd=00000000 [ 12.690927] Internal error: Oops: 17 [#1] SMP ARM [ 12.695873] Modules linked in: btwilink bluetooth ti_vpfe dwc3(+) ov2659 videobuf2_core v4l2_common videodev ti_am335x_adc 6lowpan_iphc matrix_keypad panel_dpi kfifo_buf pixcir_i2c_ts media industrialio videobuf2_dma_contig c_can_platform videobuf2_memops dwc3_omap c_can can_dev [ 12.721969] CPU: 0 PID: 1235 Comm: kworker/u3:0 Not tainted 3.14.25-02445-g9036ac6daed6 #128 [ 12.730937] Workqueue: hci0 hci_power_on [bluetooth] [ 12.736165] task: ebd93b40 ti: ecd7c000 task.ti: ecd7c000 [ 12.741856] PC is at st_kim_ref+0x30/0x40 [ 12.746071] LR is at st_kim_ref+0x30/0x40 [ 12.750289] pc : [<c03caf58>] lr : [<c03caf58>] psr: a0000013 [ 12.750289] sp : ecd7de08 ip : ecd7de08 fp : ecd7de1c [ 12.762365] r10: bf1e710c r9 : bf1e70ec r8 : bf1e7964 [ 12.767858] r7 : ebd2fd50 r6 : bf1e7964 r5 : 00000000 r4 : ecd7de24 [ 12.774723] r3 : c0957208 r2 : 00000000 r1 : c0957208 r0 : 00000000 [ 12.781589] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 12.789274] Control: 10c5387d Table: abde4059 DAC: 00000015 [ 12.795315] Process kworker/u3:0 (pid: 1235, stack limit = 0xecd7c248) Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12drivers: misc: ti-st: fix debugfs creation error handlingGigi Joseph1-5/+1
In case the debugfs creation fails the whole init process was failing. There is no need to do this as the shared transport can work without it. Fix it so it just reports the failure and continue. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12st_kim: allow suspend if callback is not registeredGigi Joseph1-2/+2
Suspend/resume was failing if callbacks were not registered. As it is ok not to do anything when suspending fix this so it soen't return an error and allow the system to suspend. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12ti-st: add device tree supportGigi Joseph2-10/+104
When using device tree, driver configuration data need to be read from device node. Add support for getting the platform data information from the device tree information stored in the .dtb file in case it exists. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: bvijay <bvijay@ti.com> Diff rendering mode:inlineside by side Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-20misc: ti-st: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-23misc: st_core: Protect unsigned value against becoming negativeLee Jones1-6/+5
Coverity reported: This less-than-zero comparison of an unsigned value is never true. In answer to that, we only ever decrement if protos_registered is positive. We can subsequently remove the paranoid checking during unregister. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-23drivers/misc/ti-st: Load firmware from ti-connectivity directory.Enric Balletbo i Serra1-2/+3
Looks like the default location for TI firmware is inside the ti-connectivity directory, to be coherent with other firmware request used by TI drivers, load the TIInit firmware from this directory instead of /lib/firmware directly. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ti-st: st-kim: Dont let probe fail when debugfs is disabledRobin van der Gracht1-2/+1
Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07drivers/misc: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drivers/misc/ti-st: Prefer tty_driver_flush_bufferPeter Hurley2-2/+1
The tty core provides an interface for flushing the driver's write buffer: tty_driver_flush_buffer(); prefer the provided interface over open-coded. Open-coding can lead to errors such as the duplicated call in the st_kim driver. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang1-6/+6
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-30drivers: misc: ti-st: fix potential race if st_kim_start failsOleksandr Kozaruk1-0/+2
If st_kim_start() fails registered protocols should be removed. This is done by calling st_reg_complete(), which as comment states is called with spin lock held. But in st_register() when st_kim_start fails it is called without holding spin lock, creating possibility of concurrent access to st_gdata data members. Hold spin lock while calling st_reg_complete if st_kim_start() fails. Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@globallogic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30misc: use platform_{get,set}_drvdata()Jingoo Han1-3/+3
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-21Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
2013-01-25Merge 3.8-rc5 into tty-nextGreg Kroah-Hartman1-1/+36
This resolves a number of tty driver merge issues found in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22Revert "drivers/misc/ti-st: remove gpio handling"Luciano Coelho1-1/+36
This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable <stable@vger.kernel.org> [3.7] Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21Revert "drivers/misc/ti-st: remove gpio handling"Luciano Coelho1-1/+36
This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable <stable@vger.kernel.org> [3.7] Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach1-1/+1
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17misc: st_core: Error triggered by convert "char" to "int"channing1-1/+2
When st driver decodes protocol index received from raw data, it does a value convert from "char" to "int". Because it's sign extension from bit8 to bit32, the "int" value maybe minus, in another word, the protocol index might be minus, but driver doesn't filter such case and may continue access memory pointed by this minus index. This patch is to change the variable type of index from "int" to "unsigned char", so that it avoids do such kind of type conversion. cc: liu chuansheng <chuansheng.liu@intel.com> Signed-off-by: channing <chao.bi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26misc/st_kim: Free resources in the error path of probe()Matthias Kaehlcke1-9/+21
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24drivers:misc: ti-st: fix potential NULL pointer dereference in st_register()Wei Yongjun1-1/+0
Remove the pointless NULL dereference above the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: check chip_awake NULL checkMatthias Kaehlcke1-1/+1
Before calling on any of the platform hooks, shared transport driver checks for the validity of the platform hooks as to whether it is provided or not. A wrong function was being checked for, before the chip_awake hook was called by the HCI-LL sleep logic handler. This patch corrects the check. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: fix read fw version cmdPavan Savoy1-13/+27
If the read firmware version response from the chip is split into multiple frames of UART buffer being received by the host, the TI-ST driver as of today is unable to put the pieces of response together unlike other responses. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: use cpu friendly completionsPavan Savoy1-9/+9
Be nice to CPU and don't hog the resources, use a nice wait_for_interruptible timeout for completions instead of wait_for_timeout which is non-interruptible. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: chip_disable on timeoutPavan Savoy1-1/+1
If the communication with the WiLink breaks down for whatever reasons & the ti-st driver is unable to un-install the line-discipline during clean-up in st_kim_stop, the GPIO should be held low (BT_EN=0) & the platform's chip disable hook shall also be called. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: remove sparse warningsPavan Savoy2-11/+13
remove sparse warnings by assigning right storage specifiers to functions and also clean-up the declarations in the include/linux/ti_wilink_st.h Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: remove gpio handlingPavan Savoy1-36/+1
A platform hook to enable/disable the chip was introduced to perform specific activities to power-up and power-down the WL chip. Moving the power-up/down sequence also there makes more sense, since different platforms have begun to have their own ways to power-up/down the chip. This patch removes all of the gpio handling done by the driver in st_kim_start/st_kim_stop & any of the gpio request done in the probe function. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-30drivers/misc/ti-st/st_core.c: missing NULL checkAlan Cox1-0/+5
Addresses https://bugzilla.kernel.org/show_bug.cgi?44431 Reported-by: <rucsoftsec@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-24MISC: convert drivers/misc/* to use module_platform_driver()Axel Lin1-12/+1
This patch converts the drivers in drivers/misc/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Pavan Savoy <pavan_savoy@ti.com> Cc: Donggeun Kim <dg77.kim@samsung.com> Acked-By: Pratyush Anand <pratyush.anand@st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04drivers:misc: ti-st: DEBUG uart, baud rate modsPavan Savoy1-0/+30
To debug different UARTs at different baud-rates connected to the WiLink connectivity combo-chipset, this patch enables the debugging code so that upon boot different UARTs at different baud-rates can be tried out to verify the interface with WiLink. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04drivers:misc: ti-st: flush UART upon fw failurePavan Savoy1-30/+24
Upon failure to read firmware version from chip or upon failure in responses to firmware download the UART needs to be flushed of its existing buffers so that the UIM can restart UART properly. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 21:54:00 +0000