summaryrefslogtreecommitdiffstats
path: root/drivers/misc/mei
AgeCommit message (Collapse)AuthorFilesLines
2014-01-13mei: limit the number of consecutive resetsTomas Winkler3-0/+18
give up reseting after 3 unsuccessful tries Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13mei: revamp mei reset state machineTomas Winkler6-104/+143
1. MEI_DEV_RESETTING device state spans only hardware reset flow while starting dev state is saved into a local variable for further reference, this let us to reduce big if statements in case we are trying to avoid nested resets 2. During initializations if the reset ended in MEI_DEV_DISABLED device state we bail out with -ENODEV 3. Remove redundant interrupts_enabled parameter as this can be deduced from the starting dev_state 4. mei_reset propagates error code to the caller 5. Add mei_restart function to wrap the pci resume Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: fix syntax in comments and debug outputAlexander Usyskin8-36/+36
Fix syntax errors in comments and debug strings Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: nfc: mei_nfc_free has to be called under lockTomas Winkler1-0/+2
nfc_nfc_free unlink clients from the device list and has to be called under mei mutex Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: use hbm idle state to prevent spurious resetsTomas Winkler4-14/+43
When reset is caused by hbm protocol mismatch or timeout we might end up in an endless reset loop and hbm protocol will never sync Cc: <stable@vger.kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: do not run reset flow from the interrupt threadTomas Winkler6-138/+210
This fixes a potential deadlock in case of a firmware initiated reset mei_reset has a dialog with the interrupt thread hence it has to be run from an another work item Most of the mei_resets were called from mei_hbm_dispatch which is called in interrupt thread context so this function underwent major revamp. The error code is propagated to the interrupt thread and if needed the reset is scheduled from there. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-18mei: me: set dma mask using DMA mapping APITomas Winkler1-0/+15
ME device is 64bit DMA capable We assume both coherent and consistent memory to match Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-18mei: enable marking internal commandsTomas Winkler5-3/+10
Set hbm header bit 30 for internal commands This mark commands that are generated by the device driver Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-16Merge 3.13-rc4 into char-misc-nextGreg Kroah-Hartman2-2/+7
We want these fixes in here.
2013-12-05mei: add 9 series PCH mei device idsTomas Winkler2-2/+7
And Lynx Point H Refresh and Wildcat Point LP device ids. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27mei: cleanup mei_irq_read_handlerTomas Winkler2-39/+50
1. Simplify function flow 2. Display errors in error or warnings level instead of debug. 3. Remove excessive debug messages Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27mei: drop redundant list_del_initAlexander Usyskin1-2/+0
list_del_init appears twice in row in mei_cl_unlink, drop one. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27mei: remove flash_work_queueTomas Winkler4-8/+20
Cancel each work properly and remove flash_work_queue. Quoting documentation: In most situations flushing the entire workqueue is overkill; you merely need to know that a particular work item isn't queued and isn't running. In such cases you should use cancel_delayed_work_sync() or cancel_work_sync() instead. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: wd: host_init propagate error codes from called functionsTomas Winkler1-6/+6
Propagate error codes from called functions, they are correct. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: replace stray pr_debug with dev_dbgAlexander Usyskin1-1/+1
Driver better use dev_dbg, not pr_debug. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: bus: propagate error code returned by mei_me_cl_by_idTomas Winkler1-1/+1
no need to change error code value returned by mei_me_cl_by_id, just propagate it on Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: mei_cl_link remove duplicated check for open_handle_countTomas Winkler1-6/+0
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: print correct device state during unexpected resetAlexander Usyskin1-4/+4
Move the unexpected state print to the beginning of mei_reset, thus printing right state. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: nfc: fix memory leak in error pathTomas Winkler1-4/+6
The flow may reach the err label without freeing cl and cl_info cl and cl_info weren't assigned to ndev->cl and cl_info so they weren't freed in mei_nfc_free called on error path Cc: <stable@vger.kernel.org> # 3.10+ Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19mei: move host_clients_map cleanup to device initAlexander Usyskin2-9/+8
Move host_clients_map cleanup from host client init to device init. This fixes bug where we cleaned up the bitmask that servers as pool for host client ids while file descriptors are kept open during suspend. On resume a new connection will be assigned id that is already taken by opened file descriptor. Consequently read/write will fail due to mismatched book keeping. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19mei: me: downgrade two errors to debug levelPaul Bolle1-2/+2
The mei_me driver prints "suspend" at error level at each suspend. It also prints "stop" at error level at driver unload. Downgrade these uninteresting messages to debug level. Cc: Adam Jackson <ajax@redhat.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16mei: me: add Lynx Point Wellsburg work station device idTomas Winkler2-0/+2
add missing device id for LPT based work station Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03mei: amthif: mei_amthif_host_init: propagate errors from called functionsTomas Winkler1-4/+7
propagate error codes from called functions, they are correct. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03mei: revamp open handler countsTomas Winkler5-16/+20
Make open counter to be incremented and decremented from mei_cl_link and mei_cl_unlik function respectively Nfc was assuming symmetric linking API and thus open handler count was never decreased. This patch fixes that. We need to add separate open hander count for amthif which is handled out of link/unlink functions and doesn't break the symmetric API. Last we do not waste clients slots if amthif or wd are not present in the device. we don't need to allocates slots ahead it is all covered by link/unlink before the devices is responding to user space connection and thus not racing on allocation Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03mei: simplify mei_open error handlingTomas Winkler2-18/+21
1. Perform simple checks first and only then attempt to allocate cl structure. 2. Remove open_handler_count test, this is already checked in mei_cl_link function 3. return -EMFILE instead of -ENOENT as expected by user space Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-29Merge 3.12-rc3 into char-misc-nextGreg Kroah-Hartman7-15/+27
We need/want the mei fixes in here so we can apply other updates that are depending on them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: cancel stall timers in mei_resetAlexander Usyskin2-0/+4
Unset init_clients_timer and amthif_stall_timers in mei_reset in order to cancel timer ticking and hence avoid recursive reset calls. Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: bus: stop wait for read during cl state transitionTomas Winkler3-8/+14
Bus layer omitted check for client state transition while waiting for read completion The client state transition may occur for example as result of firmware initiated reset Add mei_cl_is_transitioning wrapper to reduce the code repetition.: Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: make me client counters less error proneTomas Winkler2-7/+9
1. u8 counters are prone to hard to detect overflow: make them unsigned long to match bit_ functions argument type 2. don't check me_clients_num for negativity, it is unsigned. 3. init all the me client counters from one place Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26misc: mei: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: mei_cl_unlink: no need to loop over dev listTomas Winkler1-9/+4
we can call list_del_init regardless the client is linked or not it is always properly initialized Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: push credentials inside the irq write handlerTomas Winkler3-10/+34
this eventually allows as use a single write queue both for control and data messages and removing possible race Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: propagate error from write routines instead of ENODEVTomas Winkler4-27/+36
ENODEV will cause application to try to reconnect since it assumes that device went through the reset write errors are not always fatal it can happen due to resource contention Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: fix function names in debug printsAlexander Usyskin1-3/+3
Fix calling function names in debug prints. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: prefix client log messages with client me and host idsAlexander Usyskin3-32/+38
define cl_dbg and cl_err macros that add me and host id prefix for debug and error log messages so we can track for the client context of the flow. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: mei_release: drop redundant check if cb is NULLTomas Winkler1-4/+1
mei_io_cb_free follows kfree design and check for NULL internally Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: revamp read and write length checksTomas Winkler1-2/+14
1. Return zero on zero length read and writes 2. For a too large write return -EFBIG as defined in man write(2) EFBIG An attempt was made to write a file that exceeds the implementation-defined maximum file size or the process's file size limit, or to write at a position past the maximum allowed offset. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: fix format compilation warrning on 32 bit architectureTomas Winkler1-1/+1
hbm.c: In function mei_hbm_me_cl_allocate: hbm.c:52:212: warning: format %zd expects argument of type signed size_t but argument 4 has type long unsigned Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: mei_write correct checks for copy_from_userAlexander Usyskin1-2/+5
1. return -EFUALT when copy_from_user fails 2. display error message on failure in error level Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: make sure that me_clients_map big enough before copyingTomas Winkler1-1/+4
To make static analyzers happy validated that sizeof me_clients_map is larger than sizeof valid_addresses from the enumeration response before memcpy We can use BUILD_ON macro as both arrays are defined statically Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: mei_cl_link protect open_handle_count from overflowTomas Winkler1-0/+6
mei_cl_link is called both from mei_open and also from in-kernel drivers so we need to protect open_handle_count from overflow Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-08-23MEI: convert bus code to use dev_groupsGreg Kroah-Hartman1-4/+6
The dev_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the MEI bus code to use the correct field. Acked-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12mei: me: fix hardware reset flowTomas Winkler1-6/+3
Both H_IS and H_IE needs to be set to receive H_RDY interrupt 1. Assert H_IS to clear the interrupts during hw reset and use mei_me_reg_write instead of mei_hcsr_set as the later strips down the H_IS 2. fix interrupt disablement embarrassing typo hcsr |= ~H_IE -> hcsr &= ~H_IE; this will remove the unwanted interrupt on power down 3. remove useless debug print outs Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29Merge 3.11-rc3 into char-misc-next.Greg Kroah-Hartman3-8/+13
This resolves a merge issue with: drivers/misc/mei/init.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26mei: don't get stuck in select during resetTomas Winkler5-19/+42
Clear pending connection after hw reset but before hw start and wake up the waiting task in poll. Signal POLLERR in select when device went through reset. Add wrapper mei_cl_is_connected for checking if the device and client are connected. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24mei: bus: do not overflow the device name bufferTomas Winkler1-2/+2
1. use strncmp for comparsion strncpy was used for copying which may omit the final %NUL terminator 2. id->name is statically defined so we can use sizeof Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24mei: wake also writers on resetTomas Winkler3-5/+9
wake writers otherwise might have processes waiting endlessly on wait_tx during reset Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23mei: me: fix waiting for hw readyTomas Winkler1-3/+7
1. MEI_INTEROP_TIMEOUT is in seconds not in jiffies so we use mei_secs_to_jiffies macro While cold boot is fast this is relevant in resume 2. wait_event_interruptible_timeout can return with -ERESTARTSYS so do not override it with -ETIMEDOUT 3.Adjust error message Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23mei: don't have to clean the state on power upTomas Winkler1-1/+2
When powering up, we don't have to clean up the device state nothing is connected. Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 10:45:57 +0000