summaryrefslogtreecommitdiffstats
path: root/drivers/misc/mei/client.c
AgeCommit message (Collapse)AuthorFilesLines
2019-01-30mei: free read cb on ctrl_wr list flushAlexander Usyskin1-1/+4
There is a little window during disconnection flow when read cb is moved between lists and may be not freed. Remove moving read cbs explicitly during flash fixes this memory leak. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-26mei: dma ring: implement transmit flowTomas Winkler1-13/+51
Implement a circular buffer on allocated system memory. Read and write indices are stored on the control block which is also shared between the device and the host. Two new functions are exported from the DMA module: mei_dma_ring_write, and mei_dma_ring_empty_slots. The former simply copy a packet on the TX DMA circular buffer and later, returns the number of empty slots on the TX DMA circular buffer. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-26mei: dma ring: implement rx circular buffer logicTomas Winkler1-1/+1
Implement circular buffer protocol over receive dma buffer. Add extension to the mei message header that holds length of the buffer on the dma buffer. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07mei: expedite ioctl return on the notify set operation errorAlexander Usyskin1-1/+3
The notify set operation ioctl will wait till timeout is expired even in case when the FW returned an error. Check the status field of the client object in wait_event_timeout() to determine if the caller can return earlier. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07mei: flush queues by the host client onlyAlexander Usyskin1-19/+2
During queues flush, the me client in most cases is already unlinked hence the me client id is unavailable. The host client structure pointer is enough for identification. The function mei_cl_cmp_id() is dropped as it has no more usage. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12mei: fix use-after-free in mei_cl_writeJohn Hubbard1-1/+1
KASAN reports a use-after-free during startup, in mei_cl_write: BUG: KASAN: use-after-free in mei_cl_write+0x601/0x870 [mei] (drivers/misc/mei/client.c:1770) This is caused by commit 98e70866aacb ("mei: add support for variable length mei headers."), which changed the return value from len, to buf->size. That ends up using a stale buf pointer, because blocking call, the cb (callback) is deleted in me_cl_complete() function. However, fortunately, len remains unchanged throughout the function (and I don't see anything else that would require re-reading buf->size either), so the fix is to simply revert the change, and return len, as before. Fixes: 98e70866aacb ("mei: add support for variable length mei headers.") CC: Arnd Bergmann <arnd@arndb.de> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02mei: hbm: introduce dma bit in the message headerTomas Winkler1-0/+1
Add dma_ring bit in the mei message header for conveying that the message data itself are on the dma ring. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02mei: add support for variable length mei headers.Tomas Winkler1-13/+18
Remove header size knowledge from me and txe hw layers, this requires to change the write handler to accept header and its length as well as data and its length. HBM messages are fixed to use basic header, hence we add mei_hbm2slots() that converts HBM message length and mei message header, while mei_data2slots() converts data length directly to the slots. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-24mei: add mei_msg_hdr_init wrapper.Tomas Winkler1-13/+20
Wrap the mei header boilerplate initialization code in mei_msg_hdr_init function. On the way remove 'completed' field from mei_cl_cb structure as this information is already included in the header and is local to particular fragment. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-24mei: move hbuf_depth from the mei device to the hw modulesTomas Winkler1-22/+31
The host buffer depth is hardware specific so it's better to handle it inside the me and txe hw modules. In me the depth is read from register in txe it's a constant number. The value is now retrieved via mei_hbuf_depth accessor, while it replaces mei_hbuf_max_len. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-24mei: cleanup slots to data conversionsTomas Winkler1-1/+1
Cleanup conversions between slots and data. Define MEI_SLOT_SIZE instead of using 4 or sizeof(u32) across the source code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12mei: fix ssize_t to int assignment in read and write ops.Tomas Winkler1-11/+11
Use ssize_t for rets variables in mei_write(), mei_read(), and mei_cl_write() as well as change the return type of mei_cl_write() to ssize_t, to prevent assignment of possible 64bit size_t to int 32 bit variable. As by product also eliminate warning drivers/misc/mei/client.c:1702:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12mei: check for error returned from mei_hbuf_empty_slots()Tomas Winkler1-6/+16
mei_hbuf_empty_slots() may return with an error in case of circular buffer overflow. This type of error may be caused only by a bug. However currently, the error won't be detected due signed type promotion in comparison to u32. We add explicit check for less then zero and explicit cast in comparison to suppress singn-compare warning. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14mei: limit the number of queued writesAlexander Usyskin1-32/+50
Limit the number of queued writes per client. Writes above this threshold are blocked till place in the transmit queue is available. The limit is configurable via sysfs and defaults to 50. The implementation should provide blocking I/O behavior. Prior to this change one would end up in the hands of OOM. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14mei: make module referencing local to the bus.cTomas Winkler1-5/+0
Module reference counting is relevant only to the mei client devices. Make the implementation clean and move it to bus.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16mei: set device client to the disconnected state upon suspend.Tomas Winkler1-0/+6
This fixes regression introduced by commit 8d52af6795c0 ("mei: speed up the power down flow") In mei_cldev_disable during device power down flow, such as suspend or system power off, it jumps over disconnecting function to speed up the power down process, however, because the client is unlinked from the file_list (mei_cl_unlink) mei_cl_set_disconnected is not called from mei_cl_all_disconnect leaving resource leaking. The most visible is reference counter on underlying HW module is not decreased preventing to remove modules after suspend/resume cycles. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Fixes: 8d52af6795c0 ("mei: speed up the power down flow") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08mei: drop amthif internal clientAlexander Usyskin1-9/+5
AMTHIF has special support in the mei drive, it handles multiplexing multiple user space connection above single me client connection. Since there is no additional addressing information there is a strict requirement on the traffic order on each connection and on the "read after write" order within the connection. This creates a lot of complexity mostly because the other client types do not necessarily fall under the same restriction. After carefully studying the use of the AMTHIF client, we came to conclusion that the multiplexing is not really utilized by any application and we may safely remove that support and significantly simplify the driver. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-1/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-31mei: revamp io list cleanup function.Tomas Winkler1-44/+39
Specify in function names by which object is the io list filtered: cl for a client and fp for file descriptor. In that course a code duplication is resolved by dropping mei_cl_read_cb_flush and mei_clear_list and using mei_io_list_free_fp function. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31mei: replace callback structures used as list head by list_headAlexander Usyskin1-26/+26
mei_dev structure used struct mei_cl_cb type variables as for holding callbacks list heads. Replace them by the actual struct list_head as there is no other info that is handled. This slims down the mei_dev structure and mostly streamline the code. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31mei: amthif: clean command queue upon disconnectionTomas Winkler1-1/+1
In order to prevent memory leak clean up the amthif command queue upon disconnection. The issue may happen only on error path as the command queue is cleaned upon file descriptor close. And remove the cleanup from mei_cl_flush_queues as this code is never reached for amthif client. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31mei: abort waiting for notification on unsupported HWAlexander Usyskin1-0/+5
On legacy HW, pre Skylake, the notifications are not supported, return -EOPNOTSUPP in mei_cl_notify_get and prevent waiting indefinitely. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31mei: return error on notification request to a disconnected clientAlexander Usyskin1-0/+3
Request for a notification from a disconnected client will be ignored silently by the FW but the caller should know that the operation hasn't succeeded. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31mei: bus: prevent hardware module unload if device on bus is activeAlexander Usyskin1-2/+8
The hardware module should not be unloaded if the bus has active devices. Get get_/put_ bus parent module upon client device connection/disconnection, to prevent the hardware managing module to disappear underneath. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20mei: make mei_cl_set_disconnected staticAlexander Usyskin1-1/+1
mei_cl_set_disconnected is used only in client.c, so make it local to the file and mark static. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20mei: make mei_io_list_flush staticAlexander Usyskin1-1/+1
mei_io_list_flush is used only in client.c so make it local to the file and mark static. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-04mei: move write cb to completion on credentials failuresAlexander Usyskin1-8/+12
The credentials handling was pushed to the write handlers but error handling wasn't done properly. Move write callbacks to completion queue to destroy them and to notify a blocked writer about the failure Fixes: 136698e535cd1 (mei: push credentials inside the irq write handler) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29mei: request async autosuspend at the end of enumerationAlexander Usyskin1-1/+1
pm_runtime_autosuspend can take synchronous or asynchronous paths, Because we are calling pm_runtime_mark_last_busy just before this most of the cases it takes the asynchronous way. However, when the FW or driver resets during already running runtime suspend, the call will result in calling to the driver's rpm callback and results in a deadlock on device_lock. The simplest fix is to replace pm_runtime_autosuspend with asynchronous pm_request_autosuspend. Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-17mei: bus: split RX and async notification callbacksAlexander Usyskin1-0/+5
Split callbacks for RX and async notification events on mei bus to eliminate synchronization problems and to open way for RX optimizations. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-17mei: introduce host client uninitialized stateAlexander Usyskin1-3/+3
Introduce a new host client state, MEI_FILE_UNINITIALIZED, to distinguish client objects that was unlinked, but not destroyed and can be linked again. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15mei: fix parameter rename KDocAlexander Usyskin1-2/+2
Parameter renaming to fop_type was not reflected in KDoc Fixes: 3030dc0564594 (mei: add wrapper for queuing control commands) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10mei: enable to set the internal flag for client writeAlexander Usyskin1-3/+3
Prepare the client write functions to set the internal flag in message header. Carry both blocking and internal modes inside the transmit cb, and call internal bus function __mei_cl_send() with send mode bit mask. The Internal flag should be added only on messages generated by the driver. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27mei: stop the stall timer worker if not neededAlexander Usyskin1-0/+2
The stall timer worker checks periodically if there is a stalled i/o transaction. The issue with the current implementation is that the timer is ticking also when there is no pending i/o transaction. This patch provides a simple change that prevents rescheduling of the delayed work when there is no pending i/o. Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: amthif: drop mei_amthif_readAlexander Usyskin1-1/+1
mei_amthif_read have only one difference from mei_read, it is not calling mei_read_start(). Make mei_read_start return immediately for amthif client and drop the special mei_amthif_read function. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: add wrapper for queuing control commands.Tomas Winkler1-28/+50
Enclose the boiler plate code of allocating a control/hbm command cb and enqueueing it onto ctrl_wr.list in a convenient wrapper mei_cl_enqueue_ctrl_wr_cb(). This is a preparatory patch for enabling consecutive reads. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: use consistent naming for TX control flow creditsTomas Winkler1-20/+19
With the introduction of the receive control flow credits prefixed with rx_ we add tx_ prefix to the variables and function used for tracking the transmit control flow credits. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: rx flow control counterAlexander Usyskin1-27/+13
Use RX flow control counter in the host client structure to track the number of simultaneous outstanding reads. This eliminates search in queues and makes ground for enabling for parallel read. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: prepare read cb for fixed address clients on the receive path only.Alexander Usyskin1-5/+3
The read callbacks for the fixed address clients, that don't have flow control are built now on the receive path. In order to have a single allocation place we remove the allocation from the read request. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: add read callback on demand for fixed_address clientsAlexander Usyskin1-11/+4
The Fixed address clients do not work with the flow control, and the packet RX callback was allocated upon TX with anticipation of a following RX. This won't work if the clients with unsolicited Rx. Rather than preparing read callback upon a write we allocate one directly on the reciev path if one doesn't exists. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: drop mei_io_cb_alloc_bufAlexander Usyskin1-26/+6
mei_io_cb_alloc_buf have a single caller :mei_cl_alloc_cb. After amthif stopped using it, the code can be integrated into the caller and the function can be dropped. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-10mei: don't use wake_up_interruptible for wr_ctrlAlexander Usyskin1-1/+1
wr_ctrl waiters are none interruptible, so should be waken up with call to wake_up and not to wake_up_interruptible. This fixes commit: 7ff4bdd ("mei: fix waiting for wr_ctrl for corner cases.") Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30mei: fix waiting for wr_ctrl for corner cases.Alexander Usyskin1-4/+14
A control message reply may not be received if either a link reset has occurred or disconnection is initiated by the FW. In the both cases the client state will be set straight to DISCONNECTED and the driver will wait till timeout. Adding DISCONNECTED state in the waiting condition will release the client from the stall. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30mei: don't clean control queues on notify request timeoutAlexander Usyskin1-6/+2
Timeout on notify request is not a fatal condition, and actually cleaning control queues will disrupt other control flows of the same client. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30mei: fix NULL dereferencing during FW initiated disconnectionAlexander Usyskin1-0/+4
In the case when disconnection is initiated from the FW the driver is flushing items from the write control list while iterating over it: mei_irq_write_handler() list_for_each_entry_safe(ctrl_wr_list) <-- outer loop mei_cl_irq_disconnect_rsp() mei_cl_set_disconnected() mei_io_list_flush(ctrl_wr_list) <-- destorying list We move the list flushing to the completion routine. Cc: <stable@vger.kernel.org> #4.2+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20mei: fix format string in debug printsAlexander Usyskin1-1/+1
buf_idx type was changed to size_t, and few places missed out to change the print format from %ld to %zu. Use also uz for buf.size which is also of size_t Fixes: commit 56988f22e097 ("mei: fix possible integer overflow issue")' Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-11mei: fix double freeing of a cb during link resetAlexander Usyskin1-1/+3
Fix double freeing of the cb that can happen if link reset kicks in the middle of blocked write from a device on the cl bus. Free cb inside mei_cl_write function on failure and drop cb free operation from callers, during a link reset the mei_cl_write function returns with an error, but the caller doesn't know if the cb was already queued or not so it doesn't know if the cb will be freed upon queue reclaim or it has to free it itself. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07mei: split amthif client init from end of clients enumerationAlexander Usyskin1-15/+2
The amthif FW client can appear after the end of client enumeration. Amthif host client initialization is done now at FW client discovery time. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07mei: drop reserved host client idsAlexander Usyskin1-10/+5
The reserved host clients can be obsoleted now, a portion of the platforms is shipped without iAMT enabled, where the reservation is not relevant and for platforms with iAMT dynamic allocation is sufficient. Dropping reserved ids makes enumeration more flexible and generic Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07mei: fill file pointer in read cb for fixed address clientAlexander Usyskin1-5/+6
The read callback created from a flow control request for a fixed address client have NULL in the file pointer. Fill the file pointer using a data from a write callback. This allows us to drop workaround introduced in: commit eeabfcf5a92a ("mei: connection to fixed address clients from user-space") Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07mei: clean write queues and wake waiters on disconnectAlexander Usyskin1-41/+30
Clean write and write_waiting queues in disconnect. Requests in those queues are stale and processing will lead to fat warnings. In multi thread operations on disconnect and in FW disconnect case - write/read/event waiters should end wait and return error. Wake all waiters for disconnecting client to achieve that. Drop wake all and write queue clean on reset, as now we waking all waiters and cleaning write queues on disconnect. No need to do it twice. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-02 14:44:25 +0000