| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For internal needs of our CI we need to move all the common code into a
common folder instead of putting them in the root folder of the driver.
Same applies to the common header files under include/
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
In order for the user to be aware of wrong inputs, we must return
error in case the amount of jobs per cs exceeds the corresponding
queue size.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Instead of using the free slots amount on the compute CQ to determine
whether we can submit work to queues, use the queues pi/ci.
This is needed in future ASICs where we don't have CQ per queue.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Currently the amount of maximum queues is statically configured.
Using a static value is causing redundunt cycles when traversing
all queues and consumes more memory than actually needed.
In this patch we configure each asic with the exact number of
queues needed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Add command submission statistics structure which can be obtained
through the info ioctl. Each drop counter describes the reason for
which the command submission was dropped.
This information is needed for the user to be aware of the specific
reason for which the submitted work was dropped. The user can then
utilize the driver more efficiently.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
After recent concurrent cs amount increase, we must also
increase queues depth since much more concurrent work can be done.
All external queue depths were increased to 4096 as gaudi's
internal queue depths were also increased to 1024.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Currently sync stream is limited only for external queues. We want to
remove this constraint by adding a new queue property dedicated for sync
stream. In addition we move the initialization and reset methods to the
common code since we can re-use them with slight changes.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Training schemes requires much more concurrent command submissions than
inference does. In addition, training command submissions can be completed
in a non serialized manner. Hence, we add support in which each ASIC will
be able to configure the amount of concurrent pending command submissions,
rather than use a predefined amount. This change will enhance performance
by allowing the user to add more concurrent work without waiting for the
previous work to be completed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Define a structure representing the h/w sync object (SOB).
a SOB can contain up to 2^15 values. Each signal CS will increment the SOB
by 1, so after some time we will reach the maximum number the SOB can
represent. When that happens, the driver needs to move to a different SOB
for the signal operation.
A SOB can be in 1 of 4 states:
1. Working state with value < 2^15
2. We reached a value of 2^15, but the signal operations weren't completed
yet OR there are pending waits on this signal. For the next submission, the
driver will move to another SOB.
3. ALL the signal operations on the SOB have finished AND there are no more
pending waits on the SOB AND we reached a value of 2^15 (This basically
means the refcnt of the SOB is 0 - see explanation below). When that
happens, the driver can clear the SOB by simply doing WREG32 0 to it and
set the refcnt back to 1.
4. The SOB is cleared and can be used next time by the driver when it needs
to reuse an SOB.
Per SOB, the driver will maintain a single refcnt, that will be initialized
to 1. When a signal or wait operation on this SOB is submitted to the PQ,
the refcnt will be incremented. When a signal or wait operation on this SOB
completes, the refcnt will be decremented. After the submission of the
signal operation that increments the SOB to a value of 2^15, the refcnt is
also decremented.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
When we have DMA QMAN with multiple streams, we need to know whether the
command buffer contains at least one DMA packet in order to configure the
barriers correctly when adding the 2xMSG_PROT at the end of the JOB. If
there is no DMA packet, then there is no need to put engine barrier. This
is relevant only for GAUDI as GOYA doesn't have streams so the engine can't
be busy by another stream.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
We want to remove the following restrictions/assumptions in our driver:
1. The H/W queue index is also the completion queue index.
2. The H/W queue index is also the IRQ number of the completion queue.
3. All queues of the same type have consecutive indexes.
Therefore we add the support for H/W queues of the same type with
nonconsecutive indexes and completion queue index and IRQ number different
than the H/W queue index.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch adds a support for a new H/W queue type.
This type of queue is for DMA and compute engines jobs, for which
completion notification are sent by H/W.
Command buffer for this queue can be created either through the CB
IOCTL and using the retrieved CB handle, or by preparing a buffer on the
host or device SRAM/DRAM, and using the device address to that buffer.
The patch includes the handling of the 2 options, as well as the
initialization of the H/W queue and its jobs scheduling.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
s/paerser/parser/
s/requeusted/requested/
s/an JOB/a JOB/
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Users and sysadmins usually want to know what is the device utilization as
a level 0 indication if they are efficiently using the device.
Add a new opcode to the INFO IOCTL that will return the device utilization
over the last period of 100-1000ms. The return value is 0-100,
representing as percentage the total utilization rate.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
In some files the driver uses __le32_to_cpu while in other it uses
le32_to_cpu. Replace all __le32_to_cpu instances with le32_to_cpu for
consistency.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
In some files the code use __cpu_to_le32/64 while in other it use
cpu_to_le32/64. Replace all __cpu_to_le32/64 instances with
cpu_to_le32/64 for consistency.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The PQs of internal H/W queues (QMANs) can be located in different memory
areas for different ASICs. Therefore, when writing PQEs, we need to use
the correct function according to the location of the PQ. e.g. if the PQ
is located in the device's memory (SRAM or DRAM), we need to use
memcpy_toio() so it would work in architectures that have separate
address ranges for IO memory.
This patch makes the code that writes the PQE to be ASIC-specific so we
can handle this properly per ASIC.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Tested-by: Ben Segal <bpsegal20@gmail.com>
|
|
This patch adds a new parameter that is passed to the
add_end_of_cb_packets() asic-specific function.
The parameter is the pointer to the driver's device structure. The
function needs this pointer for future ASICs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Routing device accesses to the host memory requires the usage of a base
offset, which is canceled by the iATU just before leaving the device.
The value of the base offset might be distinctive between different ASIC
types.
The manipulation of the addresses is currently used throughout the
driver code, and one should be aware to it whenever providing a host
memory address to the device.
This patch removes this manipulation from the driver common code, and
moves it to the ASIC specific functions that are responsible for
host memory allocation/mapping.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch renames four functions in the ASIC-specific functions section,
so it will be easier to differentiate them from the generic kernel
functions with the same name.
This will help in future code reviews, to make sure we don't use the
kernel functions directly.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The device's CPU accessible memory on host is managed in a dedicated
pool, except for 2 regions - Primary Queue (PQ) and Event Queue (EQ) -
which are allocated from generic DMA pools.
Due to address length limitations of the CPU, the addresses of all these
memory regions must have the same MSBs starting at bit 40.
This patch modifies the allocation of the PQ and EQ to be also from the
dedicated pool, to ensure compliance with the limitation.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch adds accounting for active CS. Active means that the CS was
submitted to the H/W queues and was not completed yet.
This is necessary to support suspend operation. Because the device will be
reset upon suspend, we can only suspend after all active CS have been
completed. Hence, we need to perform accounting on their number.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Add __cpu_to_le16/32/64 and __le16/32/64_to_cpu where needed according to
sparse.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds the main flow for the user to submit work to the device.
Each work is described by a command submission object (CS). The CS contains
3 arrays of command buffers: One for execution, and two for context-switch
(store and restore).
For each CB, the user specifies on which queue to put that CB. In case of
an internal queue, the entry doesn't contain a pointer to the CB but the
address in the on-chip memory that the CB resides at.
The driver parses some of the CBs to enforce security restrictions.
The user receives a sequence number that represents the CS object. The user
can then query the driver regarding the status of the CS, using that
sequence number.
In case the CS doesn't finish before the timeout expires, the driver will
perform a soft-reset of the device.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds the H/W queues module and the code to initialize Goya's
various compute and DMA engines and their queues.
Goya has 5 DMA channels, 8 TPC engines and a single MME engine. For each
channel/engine, there is a H/W queue logic which is used to pass commands
from the user to the H/W. That logic is called QMAN.
There are two types of QMANs: external and internal. The DMA QMANs are
considered external while the TPC and MME QMANs are considered internal.
For each external queue there is a completion queue, which is located on
the Host memory.
The differences between external and internal QMANs are:
1. The location of the queue's memory. External QMANs are located on the
Host memory while internal QMANs are located on the on-chip memory.
2. The external QMAN write an entry to a completion queue and sends an
MSI-X interrupt upon completion of a command buffer that was given to
it. The internal QMAN doesn't do that.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
