Age | Commit message (Collapse) | Author | Files | Lines |
|
Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that
integrates all the necessary power management, housekeeping, and
interface support functions into a single IC. Its key features include
overtemperature protection, low-dropout linear regulators, GPIOs, and an
I2C interface.
Add an MFD driver to support it.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Don't hardocde EIO but use the obtained value.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Mark Jonas <mark.jonas@de.bosch.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
s/Hisilicon/HiSilicon/
It should use capital S, according to the official website
https://www.hisilicon.com/en.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
We have started to get a bunch of pointless dmamask not set warnings
that makes the output of dmesg -l err,warn hard to read with many
extra warnings:
cpcap-regulator cpcap-regulator.0: DMA mask not set
cpcap_adc cpcap_adc.0: DMA mask not set
cpcap_battery cpcap_battery.0: DMA mask not set
cpcap-charger cpcap-charger.0: DMA mask not set
cpcap-pwrbutton cpcap-pwrbutton.0: DMA mask not set
cpcap-led cpcap-led.0: DMA mask not set
cpcap-led cpcap-led.1: DMA mask not set
cpcap-led cpcap-led.2: DMA mask not set
cpcap-led cpcap-led.3: DMA mask not set
cpcap-led cpcap-led.4: DMA mask not set
cpcap-rtc cpcap-rtc.0: DMA mask not set
cpcap-usb-phy cpcap-usb-phy.0: DMA mask not set
This seems to have started with commit 4d8bde883bfb ("OF: Don't set
default coherent DMA mask"). We have the parent SPI controller use
DMA, while CPCAP driver and it's children do not. For audio, the
DMA is handled over I2S bus with the McBSP driver.
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
There is no reason why the arizona core,irq and codec model specific
regmap bits cannot be build as a module. All they do is export symbols
which are used by the arizona-spi/i2c and arizona-codec modules, which
themselves can be built as module.
Change the Kconfig and Makefile arizona bits so that the arizona MFD-core
can be built as a module.
This is especially useful on x86 platforms with a WM5102 codec, this
allows the arizona MFD driver necessary for the WM5102 codec to be
enabled in generic distro-kernels without growing the base kernel-image
size.
Note this also adds an explicit "depends on MFD_ARIZONA" to all the
arizona codec Kconfig options. The codec drivers use functions from mfd
arizona-core. These new depends are necessary to disallow the codec
drivers being builtin when the arizona-core is build as a module,
otherwise we end up with missing symbol errors when building vmlinuz.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/mfd/si476x-i2c.c:360: warning: expecting prototype for si476x_drain_rds_fifo(). Prototype was for si476x_core_drain_rds_fifo() instead
drivers/mfd/si476x-i2c.c:467: warning: expecting prototype for si476x_get_status(). Prototype was for si476x_core_get_status() instead
drivers/mfd/si476x-i2c.c:484: warning: expecting prototype for si476x_get_and_signal_status(). Prototype was for si476x_core_get_and_signal_status() instead
drivers/mfd/si476x-i2c.c:555: warning: expecting prototype for si476x_firmware_version_to_revision(). Prototype was for si476x_core_fwver_to_revision() instead
drivers/mfd/si476x-i2c.c:619: warning: expecting prototype for si476x_get_revision_info(). Prototype was for si476x_core_get_revision_info() instead
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/mfd/si476x-cmd.c:406: warning: expecting prototype for si476x_cmd_func_info(). Prototype was for si476x_core_cmd_func_info() instead
drivers/mfd/si476x-cmd.c:437: warning: expecting prototype for si476x_cmd_set_property(). Prototype was for si476x_core_cmd_set_property() instead
drivers/mfd/si476x-cmd.c:463: warning: expecting prototype for si476x_cmd_get_property(). Prototype was for si476x_core_cmd_get_property() instead
drivers/mfd/si476x-cmd.c:525: warning: expecting prototype for si476x_cmd_dig_audio_pin_cfg(). Prototype was for si476x_core_cmd_dig_audio_pin_cfg() instead
drivers/mfd/si476x-cmd.c:574: warning: expecting prototype for si476x_cmd_zif_pin_cfg(). Prototype was for si476x_core_cmd_zif_pin_cfg() instead
drivers/mfd/si476x-cmd.c:631: warning: expecting prototype for si476x_cmd_ic_link_gpo_ctl_pin_cfg(). Prototype was for si476x_core_cmd_ic_link_gpo_ctl_pin_cfg() instead
drivers/mfd/si476x-cmd.c:662: warning: expecting prototype for si476x_cmd_ana_audio_pin_cfg(). Prototype was for si476x_core_cmd_ana_audio_pin_cfg() instead
drivers/mfd/si476x-cmd.c:697: warning: expecting prototype for si476x_cmd_intb_pin_cfg(). Prototype was for si476x_core_cmd_intb_pin_cfg_a10() instead
drivers/mfd/si476x-cmd.c:742: warning: expecting prototype for si476x_cmd_am_rsq_status(). Prototype was for si476x_core_cmd_am_rsq_status() instead
drivers/mfd/si476x-cmd.c:874: warning: expecting prototype for si476x_cmd_fm_seek_start(). Prototype was for si476x_core_cmd_fm_seek_start() instead
drivers/mfd/si476x-cmd.c:905: warning: expecting prototype for si476x_cmd_fm_rds_status(). Prototype was for si476x_core_cmd_fm_rds_status() instead
drivers/mfd/si476x-cmd.c:1050: warning: expecting prototype for si476x_cmd_am_seek_start(). Prototype was for si476x_core_cmd_am_seek_start() instead
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/mfd/omap-usb-tll.c:24: warning: expecting prototype for omap(). Prototype was for USBTLL_DRIVER_NAME() instead
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/mfd/omap-usb-host.c:26: warning: expecting prototype for omap(). Prototype was for USBHS_DRIVER_NAME() instead
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/mfd/db8500-prcmu.c:624: warning: expecting prototype for prcmu_get_current_mode(). Prototype was for prcmu_get_xp70_current_state() instead
drivers/mfd/db8500-prcmu.c:908: warning: expecting prototype for db8500_set_ape_opp(). Prototype was for db8500_prcmu_set_ape_opp() instead
drivers/mfd/db8500-prcmu.c:2303: warning: expecting prototype for db8500_prcmu_reset_modem(). Prototype was for db8500_prcmu_modem_reset() instead
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Cc: Sundar Iyer <sundar.iyer@stericsson.com>
Cc: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/mfd/twl-core.c:496: warning: expecting prototype for twl_regcache_bypass(). Prototype was for twl_set_regcache_bypass() instead
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Kai Svahn <kai.svahn@nokia.com>
Cc: syed khasim <x0khasim@ti.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/mfd/wm831x-core.c:121: warning: expecting prototype for wm831x_reg_unlock(). Prototype was for wm831x_reg_lock() instead
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: patches@opensource.cirrus.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This driver include linux/irqdomain.h via a bizarre set of
indirection, which we are about to break.
Directly include the required file.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Currently the AXP chip requires to have its IRQ line connected to some
interrupt controller, and will fail probing when this is not the case.
On a new Allwinner SoC (H616) there is no NMI pin anymore, and at
least one board does not connect the AXP's IRQ pin to anything else,
so the interrupt functionality of the AXP chip is simply not available.
Check whether the interrupt line number returned by the platform code is
valid, before trying to register the irqchip. If not, we skip this
registration, to avoid the driver to bail out completely.
Also we need to skip the power key functionality, as this relies on
a valid IRQ as well.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Merge different sub-devices I2C read/write functions into one Regmap,
because PMIC and LDO part need CRC bits for access protection.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Merge header file into driver and remove unuse register define
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fix flow which is used to check ic exist.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Remove handle_post_irq which is used to retrigger IRQ.
Set IRQ level low trigger in dtsi to keep IRQ always be handled.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Rename mt6360_pmu by mt6360, because of including
not only PMU part, but also entire MT6360 IC
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Rename mt6360_pmu_data by mt6360_ddata because of including
not only PMU part, but also entire MT6360 IC.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Combine mt6360 pmic/ldo resources into mt6360 regulator resources
to simplify the similar resources object.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Indicate sub-dev compatible name by using "-".
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Remove redundant brackets around raw numbers.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Rearrange include file without sorting by alphabet.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This adds support Richtek RT4831 core. It includes four channel WLED driver
and Display Bias Voltage outputs.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
During more massive generation of interrupts, the IRQ got stuck,
and the subdevices did not see any new interrupts. That happens
especially at wonky USB supply in combination with ADC reads.
To fix that trigger the IRQ at level low instead of falling edge.
Fixes: 0c81604516af ("mfd: rn5t618: Add IRQ support")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This change is just to simplify the code, no actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Optionally handle the NRST pin (active low reset) in order to start from a
known state during boot and to shut down the chip when rebooting.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch adds/modifies MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The commit 529a1101212a("mfd: syscon: Don't free allocated name
for regmap_config") doesn't free the allocated name field of struct
regmap_config, but introduce a memory leak. There is another
commit 94cc89eb8fa5("regmap: debugfs: Fix handling of name string
for debugfs init delays") fixing this debugfs init issue from root
cause. With this fixing, the name field in struct regmap_debugfs_node
is removed. When initialize debugfs for syscon driver, the name
field of struct regmap_config is not used anymore. So, the allocated
name field of struct regmap_config is need to be freed directly after
regmap initialization to avoid memory leak.
Cc: stable@vger.kernel.org
Fixes: 529a1101212a("mfd: syscon: Don't free allocated name for regmap_config")
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Currently the software node is removed in error case and at ->remove()
stage unconditionally, that ruins the symmetry. Besides, in some cases,
when mfd_add_device() fails, the device_remove_software_node() call
may lead to NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 00000000
...
EIP: strlen+0x12/0x20
...
kernfs_name_hash+0x13/0x70
kernfs_find_ns+0x32/0xc0
kernfs_remove_by_name_ns+0x2a/0x90
sysfs_remove_link+0x16/0x30
software_node_notify.cold+0x34/0x6b
device_remove_software_node+0x5a/0x90
mfd_add_device.cold+0x30a/0x427
Fix all these by guarding device_remove_software_node() with a conditional
and locating it at the right place.
Fixes: 42e59982917a ("mfd: core: Add support for software nodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
WCD934x supports Multi Button Headset control which enable headset detection
along with headset button detection.
This patch adds interrupts required for MBHC functionality.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Currently only two interrupts supported is added in wcd934x interrupt controller,
however if we are adding more interrupts the file will become too much unreadable.
So add a macro to make adding new interrupts easy and also convert existing
slim and soundwire interrupts to use it.
This is in preparation to enable Multi Button Headset Control support on this
codec.
WCD934x supports Multi Button Headset control which enable headset detection
along with headset button detection.
This patch adds interrupts required for MBHC functionality.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Fix two typos retured --> returned
Signed-off-by: Jian Dong <dongjian@yulong.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add compatible strings and interrupts for pmic keys
which serves as child device of MFD.
MT6358 has two interrupts per key: one for press, another one for
release (_R)
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Some pmics of the mt6397 family (such as MT6358), have two IRQs per
physical key: one for press event, another for release event.
The mtk-pmic-keys driver assumes that each key only has one
IRQ. The key index and the RES_IRQ resource index have a 1/1 mapping.
This won't work for MT6358, as we have multiple resources (2) for one key.
To prepare mtk-pmic-keys to support MT6358, retrieve IRQs by name
instead of by index.
Note: The keys_resources are not part of the device-tree bindings so
this won't break any DT schemas.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
MFD_MP2629 should select MFD_CORE to a prevent build error:
ERROR: modpost: "devm_mfd_add_devices" [drivers/mfd/mp2629.ko] undefined!
Fixes: 06081646450e ("mfd: mp2629: Add support for mps battery charger")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add Intel Alder Lake-M LPSS PCI IDs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
'tb-mfd-regulator-rtc-v5.14' into ibs-for-mfd-merged
Immutable branch between MFD and ASoC due for the v5.14 merge window
Immutable branch between MFD, GPIO and Regulator due for the v5.14 merge window
Immutable branch between MFD, Regulator and RTC due for the v5.14 merge window
|
|
This adds support for the MediaTek MT6359 PMIC. This is a
multifunction device with the following sub modules:
- Codec
- Interrupt
- Regulator
- RTC
It is interfaced to the host controller using SPI interface
by a proprietary hardware called PMIC wrapper or pwrap.
MT6359 MFD is a child device of the pwrap.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch refines the interrupt related code to support new chips.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add rk817 codec support cell to rk808 mfd driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
New Drivers:
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
New Device Support:
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
Removed Device Support:
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
New Functionality:
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
New/converted Device Tree bindings:
- rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
atc260x, ricoh rn5t618, qcom pm8xxx
- Fix-ups:
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio
Bug Fixes:
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers"
* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
mfd: twl: Remove unused inline function twl4030charger_usb_en()
dt-bindings: mfd: Convert pm8xxx bindings to yaml
dt-bindings: mfd: Add compatible for pmk8350 rtc
i2c: designware: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: arizona: Fix rumtime PM imbalance on error
mfd: max8997: Replace 8998 with 8997
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: ntxec: Support for EC in Tolino Shine 2 HD
mfd: stm32-timers: Avoid clearing auto reload register
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"battery/charger driver changes:
- core:
- provide function stubs if CONFIG_POWER_SUPPLY=n
- reduce loglevel for probe defer info
- surface:
- new battery and charger drivers for Surface
- bq27xxx:
- add bq78z100 support
- fix current_now/power_avg for newer chips
- cw2015:
- add CHARGE_NOW support
- ab8500:
- drop pdata support
- convert most DT bindings to YAML
- lots of minor fixes and cleanups
reset drivers:
- ltc2952-poweroff:
- make trigger delay configurable from DT
- minor fixes and cleanups"
* tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits)
power: supply: cpcap-battery: fix invalid usage of list cursor
power: supply: bq256xx: add kerneldoc for structure members
power: supply: act8945a: correct kerneldoc
power: supply: max17040: remove unneeded double cast
power: supply: max17040: handle device_property_read_u8_array() failure
power: supply: max14577: remove unneeded variable initialization
power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static
power: supply: surface-battery: Make some symbols static
power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE
power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: Add AC driver for Surface Aggregator Module
power: supply: Add battery driver for Surface Aggregator Module
power: supply: bq25980: Move props from battery node
power: supply: core: Use true and false for bool variable
power: supply: goldfish: Remove the GOLDFISH dependency
power: reset: ltc2952: make trigger delay configurable
power: supply: cpcap-charger: Simplify bool conversion
power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"The most notable change is the removal of the amd_energy driver. It
was rendered all but unusable by making its attributes privileged-only
to work around a security issue. A suggested remedy was rejected by
AMD, so the only real solution was to remove the driver. For the
future, we'll have to make sure that no privileged-access-only drivers
are accepted into the hwmon subsystem in the first place. The hwmon
ABI document was updated accordingly.
Other changes:
PMBus drivers:
- Added driver for MAX15301
- Added driver for BluTek BPA-RS600
- Added driver for fsp-3y PSUs and PDUs
- Added driver for Infineon IR36021
- Added driver for ST STPDDC60
- Added support for TI TPS53676 to tps53679 driver
- Introduced PMBUS symbol namespace. This was made necessary by a
suggestion to use its exported functions from outside the hwmon
subsystem.
- Minor improvements and bug fixes
New drivers:
- Driver for NZXT Kraken X42/X52/X62/X72
Driver enhancements:
- Added support for Intel D5005 to intel-m10-bmc-hwmon driver
- Added support for NCT6686D to nct6683 driver
Other:
- Converted sch5627 and amd9240 drivers to
hwmon_device_register_with_info()
- Added support for fan drawers capability and present registers to
mlxreg-fan driver
- Added Dell Latitude E7440 to fan control whitelist in dell-smm
driver
- Replaced snprintf in show functions with sysfs_emit. Done with
coccinelle script for all drivers to preempt endless per-driver
submissions of the same change.
- Use kobj_to_dev(). Another coccinelle based change to preempt
endless per-driver submissions of the same change.
- Various minor fixes and improvements"
* tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (38 commits)
hwmon: Remove amd_energy driver
hwmon: Clarify scope of attribute access
hwmon: (pmbus) Introduce PMBUS symbol namespace
hwmon: (pmbus) Add pmbus driver for MAX15301
hwmon: (sch5627) Remove unnecessary error path
hwmon: (sch5627) Use devres function
hwmon: (pmbus/pxe1610) don't bail out when not all pages are active
hwmon: Add driver for fsp-3y PSUs and PDUs
hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 card
hwmon: (sch5627) Split sch5627_update_device()
hwmon: (sch5627) Convert to hwmon_device_register_with_info()
hwmon: (nct6683) remove useless function
hwmon: (dell-smm) Add Dell Latitude E7440 to fan control whitelist
MAINTAINERS: Add keyword pattern for hwmon registration functions
hwmon: (mlxreg-fan) Add support for fan drawers capability and present registers
hwmon: (pmbus/tps53679) Add support for TI TPS53676
dt-bindings: Add trivial device entry for TPS53676
hwmon: (ftsteutates) Rudimentary typo fixes
hwmon: (pmbus) Add driver for BluTek BPA-RS600
dt-bindings: Add vendor prefix and trivial device for BluTek BPA-RS600
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates freom Hans de Goede:
- lots of Microsoft Surface work
- platform-profile support for HP and Microsoft Surface devices
- new WMI Gigabyte motherboard temperature monitoring driver
- Intel PMC improvements for Tiger Lake and Alder Lake
- misc bugfixes, improvements and quirk additions all over
* tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-P
platform/x86: intel_pmc_core: Uninitialized data in pmc_core_lpm_latch_mode_write()
platform/x86: intel_pmc_core: add ACPI dependency
platform/surface: aggregator: fix a bit test
platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" smatch warning
platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet
platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P
platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake
platform/x86: intel_pmc_core: Add option to set/clear LPM mode
platform/x86: intel_pmc_core: Add requirements file to debugfs
platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake
platform/x86: intel_pmc_core: Show LPM residency in microseconds
platform/x86: intel_pmc_core: Handle sub-states generically
platform/x86: intel_pmc_core: Remove global struct pmc_dev
platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only threaded handler
platform/x86: gigabyte-wmi: add X570 AORUS ELITE
platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensors
platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
platform/x86: add Gigabyte WMI temperature driver
...
|
|
Like the Intel N3000 card, the Intel D5005 has a MAX10 based
BMC. This commit adds support for the D5005 sensors that are
monitored by the MAX10 BMC.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210413225835.459662-3-matthew.gerlach@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This reverts commit 9c03008da125c1007919a9186628af3cc105f526.
commit 41a8a027f4d3 ("regulator: dt-bindings: Document charger-supply
for max8997") introduced a binding which uses a property of the max8997
pmic node to configure charger supply, making subnodes for MFD cells
obsolete.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The driver can provide a software node group instead of
passing legacy platform data. This will allow to drop
the legacy platform data structures along with unifying
a child device driver to use same interface for all
property providers, i.e. Device Tree, ACPI, and board files.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|