summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2013-03-15mfd: twl4030-madc: Remove __exit_p annotationArnd Bergmann1-1/+1
4740f73fe5 "mfd: remove use of __devexit" removed the __devexit annotation on the twl4030_madc_remove function, but left an __exit_p() present on the pointer to this function. Using __exit_p was as wrong with the devexit in place as it is now, but now we get a gcc warning about an unused function. In order for the twl4030_madc_remove to work correctly in built-in code, we have to remove the __exit_p. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDOAxel Lin1-4/+13
Since commit c8801a8e "regulator: core: Mark all get and enable calls as __must_check", we must check return value of regulator_enable() to silence below build warning. CC drivers/mfd/ab8500-gpadc.o drivers/mfd/ab8500-gpadc.c: In function 'ab8500_gpadc_runtime_resume': drivers/mfd/ab8500-gpadc.c:598:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] drivers/mfd/ab8500-gpadc.c: In function 'ab8500_gpadc_probe': drivers/mfd/ab8500-gpadc.c:655:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] Also convert to devm_regulator_get(), this fixes a missing regulator_put() call in ab8500_gpadc_remove(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()Mark Brown1-1/+1
Looks like the conversion to enum was missed for the definition of this function, the declaration has been updated. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: tps65912: Declare and use tps65912_irq_exit()Mark Brown1-0/+1
Clean up interrupts on exit, silencing a sparse warning caused by tps65912_irq_exit() being defined but not prototyped as we go. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: palmas: Provide irq flags through DT/platform dataLaxman Dewangan1-3/+33
Currently driver sets the irq type to IRQF_TRIGGER_LOW which is causing interrupt registration failure in ARM based SoCs as: [ 0.208479] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xf0) [ 0.208513] dummy 0-0059: Failed to request IRQ 118: -22 Provide the irq flags through platform data if device is registered through board file or get the irq type from DT node property in place of hardcoding the irq flag in driver to support multiple platforms. Also configure the device to generate the interrupt signal according to flag type. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: Make AB8500_CORE select POWER_SUPPLY to fix build errorAxel Lin1-0/+1
This patch fixes below build error when CONFIG_POWER_SUPPLY is not set. drivers/built-in.o: In function `ab8500_power_off': drivers/mfd/ab8500-sysctrl.c:37: undefined reference to `power_supply_get_by_name' drivers/mfd/ab8500-sysctrl.c:53: undefined reference to `power_supply_get_by_name' make: *** [vmlinux] Error 1 Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: omap-usb-host: Actually update hostconfigRoger Quadros1-3/+3
The helper functions omap_usbhs_rev1_hostconfig() and omap_usbhs_rev2_hostconfig() don't write into the hostconfig register. Make sure that we write the return value into the hostconfig register. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-27mfd: convert to idr_alloc()Tejun Heo1-7/+6
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24Merge tag 'mfd-3.9-1' of ↵Linus Torvalds33-997/+2941
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
2013-02-21Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-2/+2
Pull ARM SoC driver specific changes from Arnd Bergmann: - Updates to the ux500 cpufreq code - Moving the u300 DMA controller driver to drivers/dma - Moving versatile express drivers out of arch/arm for sharing with arch/arm64 - Device tree bindings for the OMAP General Purpose Memory Controller * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: OMAP2+: gpmc: Add device tree documentation for elm handle ARM: OMAP2+: gpmc: add DT bindings for OneNAND ARM: OMAP2+: gpmc-onenand: drop __init annotation mtd: omap-onenand: pass device_node in platform data ARM: OMAP2+: Prevent potential crash if GPMC probe fails ARM: OMAP2+: gpmc: Remove unneeded of_node_put() arm: Move sp810.h to include/linux/amba/ ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc-nand: drop __init annotation mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc: don't create devices from initcall on DT dma: coh901318: cut down on platform data abstraction dma: coh901318: merge header files dma: coh901318: push definitions into driver dma: coh901318: push header down into the DMA subsystem dma: coh901318: skip hard-coded addresses dma: coh901318: remove hardcoded target addresses dma: coh901318: push platform data into driver dma: coh901318: create a proper platform data file ...
2013-02-21Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-54/+85
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-21Merge tag 'fixes-non-critical' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM SoC bug fixes from Arnd Bergmann: "Bug fixes that did not make it into v3.8, mostly because they were not considered important enough, and in some cases because bugs only show up in combination with other patches destined for 3.9. This includes a few larger patches for GPIO on the Marvell PXA platform and a lot of Samsung specific bug fixes, as well as a series from Arnd to fix older build warnings." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350 scripts/sortextable: silence script output ARM: s3c: i2c: add platform_device forward declaration ARM: mvebu: allow selecting mvebu without Armada XP ARM: pick Versatile by default for !MMU ARM: integrator: fix build with INTEGRATOR_AP off ARM: integrator/versatile: fix NOMMU warnings ARM: sa1100: don't warn about mach/ide.h ARM: shmobile: fix defconfig warning on CONFIG_USB ARM: w90x900: fix legacy assembly syntax ARM: samsung: fix assembly syntax for new gas ARM: disable virt_to_bus/virt_to_bus almost everywhere ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl ARM: SAMSUNG: Silence empty switch warning in fimc-core.h ARM: SAMSUNG: Silence empty switch warning in sdhci.h ARM: msm: proc_comm_boot_wait should not be __init arm: vt8500: Update MAINTAINERS entry for arch-vt8500 ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU ARM: S5PV210: Fix early uart output in fifo mode ...
2013-02-21Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-20Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6Linus Torvalds1-8/+6
Pull battery updates from Anton Vorontsov: "Four new drivers: - goldfish_battery: This is Android Emulator battery driver. Originally from Google, but Intel folks reshaped it for mainline - pm2301_charger: A new driver for ST-Ericsson 2301 Power Management chip, uses AB8500 battery management core - qnap-poweroff: The driver adds poweroff functionality for QNAP NAS boxes - restart-poweroff: A generic driver that implements 'power off by restarting'. The actual poweroff functionality is implemented through a bootloader, so Linux' task is just to restart the box. The driver is useful on Buffalo Linkstation LS-XHL and LS-CHLv2 boards. Andrew Lunn worked on submitting the driver (as well as qnap-poweroff above). Additionally: - A lot of fixes for ab8500 drivers. This is a part of efforts of syncing internal ST-Ericsson development tree with the mainline. Lee Jones @ Linaro worked on compilation and reshaping these series. - New health properties for the power supplies: "Watchdog timer expire" and "Safety timer expire" - As usual, a bunch of fixes/cleanups here and there" * tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits) bq2415x_charger: Add support for offline and 100mA mode generic-adc-battery: Fix forever loop in gab_remove() goldfish_battery: Add missing GENERIC_HARDIRQS dependency da9030_battery: Include notifier.h bq27x00_battery: Fix reporting battery temperature power/reset: Remove newly introduced __dev* annotations lp8727_charger: Small cleanup in naming ab8500_btemp: Demote initcall sequence ds2782_battery: Add power_supply_changed() calls for proper uevent support power: Add battery driver for goldfish emulator u8500-charger: Delay for USB enumeration ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures ab8500-charger: Do not touch VBUSOVV bits ab8500-fg: Use correct battery charge full design pm2301: LPN mode control support pm2301: Enable vbat low monitoring ab8500-bm: Flush all work queues before suspending ab8500-fg: Go to INIT_RECOVERY when charger removed ab8500-charger: Add support for autopower on AB8505 and AB9540 abx500-chargalg: Add new sysfs interface to get current charge status ... Fix up fairly straightforward conflicts in the ab8500 driver. But since it seems to be ARM-specific, I can't even compile-test the result..
2013-02-20Merge tag 'regulator-3.9' of ↵Linus Torvalds1-2/+73
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A fairly quiet release for the regulator API, the bulk of the changes being lots of small cleanups and API updates contributed by Axel Lin with just a small set of larger changes: - New driver for LP8755 - DT support for S5M8767, TPS51632, TPS6507x and TPS65090 - Support for writing a "commit changes" bit in the regmap helper functions." * tag 'regulator-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (60 commits) regulator: Fix memory garbage dev_err printout. regulator: max77686: Reuse rdev_get_id() function. regulator: tps51632: Use regulator_[get|set]_voltage_sel_regmap regulator: as3711: Fix checking if no platform initialization data regulator: s5m8767: Prevent possible NULL pointer dereference regulator: s5m8767: Fix dev argument for devm_kzalloc and of_get_regulator_init_data regulator: core: Optimize _regulator_do_set_voltage if voltage does not change regulator: max8998: Let regulator core handle the case selector == old_selector regulator: s5m8767: Use of_get_child_count() regulator: anatop: improve precision of delay time regulator: show state for GPIO-controlled regulators regulator: s5m8767: Fix build in non-DT case regulator: add device tree support for s5m8767 regulator: palmas: Remove a redundant setting for warm_reset regulator: mc13xxx: Use of_get_child_count() regulator: max8997: Use of_get_child_count() regulator: tps65090: Fix using wrong dev argument for calling of_regulator_match regulators: anatop: add set_voltage_time_sel interface regulator: Add missing of_node_put() regulator: tps6507x: Fix using wrong dev argument for calling of_regulator_match ...
2013-02-19Merge remote-tracking branch 'regulator/topic/s5m8767' into regulator-nextMark Brown1-2/+73
2013-02-15mfd: lpc_ich: Use devres API to allocate private dataAaron Sierra1-5/+2
And fix a kzalloc argument inversion bug while converting to devres. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown2-0/+2
2013-02-14Merge branch 'usbhost17-for-mfd' of git://github.com/rogerq/linux into for-nextSamuel Ortiz2-335/+466
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCHJames Ralston1-0/+38
This patch adds the Watchdog Timer Device IDs for the Intel Wellsburg PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Acked-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: lpc_sch: Accomodate partial population of the MFD devicesDarren Hart1-76/+71
The current probe aborts if any of the 3 base address registers are disabled. On a TunnelCreek system I am working on, this resulted in the SMBIOS and GPIO devices being removed when it couldn't read the base address for the watchdog timer. This patch accommodates partial population of the lpc_sch_cells array and only aborts if all the base address registers are disabled. A max size array is allocated and the individual device cells are added to it after their base addresses are successfully determined. This simplifies the code a bit by removing the need for the separate tunnelcreek cells array and combining some of the add/remove logic. Cc: Grant Likely <grant.likely@secretlab.ca>, Cc: Denis Turischev <denis@compulab.co.il>, Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: da9052-i2c: Staticize da9052_i2c_fix()Fabio Estevam1-2/+1
da9052_i2c_fix() is only used locally, so let it be static. Fix the following sparse warning: drivers/mfd/da9052-i2c.c:63:5: warning: symbol 'da9052_i2c_fix' was not declared. Should it be static? Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: syscon: Fix sparse warningFabio Estevam1-0/+1
Fix the following sparse warnings: drivers/mfd/syscon.c:40:15: warning: symbol 'syscon_node_to_regmap' was not declared. Should it be static? drivers/mfd/syscon.c:56:15: warning: symbol 'syscon_regmap_lookup_by_compatible' was not declared. Should it be static? drivers/mfd/syscon.c:72:15: warning: symbol 'syscon_regmap_lookup_by_phandle' was not declared. Should it be static? Cc: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: twl-core: Fix kernel panic on bootJon Hunter1-8/+8
Commit 8a6aaa3 (mfd: twl-core: Collect global variables behind one private structure (global)) removed the variable "inuse" that is used to determine if the device has been initialised and now use the twl_priv structure instead. This is causing the kernel to panic on OMAP3+ devices using the twl driver, because we try to access the twl_priv->ready member before checking if twl_priv is initialised. Fix this and move this test to the beginning of the twl_i2c_read/write function because twl_get_last_module() also uses the twl_priv structure. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14Merge branch 'abx500-pinctrl-for-mfd' of ↵Samuel Ortiz1-3/+50
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into for-next Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Fix issue that booting OS with SD card insertedWei WANG1-0/+30
Realtek card reader supports both SD and MS card. According to the settings of rtsx MFD driver, SD host will be probed before MS host. If we boot/reboot Linux with SD card inserted, the resetting flow of SD card will succeed, and the following resetting flow of MS is sure to fail. Then MS upper-level driver will ask rtsx driver to turn power off. This request leads to the result that the following SD commands fail and SD card can't be accessed again. In this commit, Realtek's SD and MS host driver will check whether the card that upper driver requesting is the one existing in the slot. If not, Realtek's host driver will refuse the operation to make sure the exlusive accessing at the same time. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: ab8500: Fix compile errorLinus Walleij1-0/+1
When compiling the AB8500 core driver in the latest MFD tree the following happens: CC drivers/mfd/ab8500-debugfs.o /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:3: error: 'AB8500_SYS_CTRL1_BLOCK' undeclared here (not in a function) /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: array index in initializer not of integer type /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: (near initialization for 'debug_ranges') (...) This is due to a missing include statement, so fix it up. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: Add missing GENERIC_HARDIRQS dependeciesHeiko Carstens1-34/+38
A lot of mfd drivers select MFD_CORE which however depends on GENERIC_HARDIRQS support. So add the missing dependency to all drivers to get rid of this link error: ERROR: "irq_create_mapping" [drivers/mfd/mfd-core.ko] undefined! Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14Merge branch 'for-mfd' of git://git.linaro.org/people/ljones/linux-3.0-ux500 ↵Samuel Ortiz5-74/+1375
into for-next Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: max8925: Fix onkey driver irq baseQing Xu1-1/+1
update onkey driver's irq base, it should get from max8925, but not save in a private value Signed-off-by: Qing Xu <qingx@marvell.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: max8925: Fix mfd device register failureQing Xu1-12/+10
we encounter rtc/power/touch driver registry failure, root cause it is resources confilict in insert_resouce, solved by changing mfd_add_devices 5th parameter to NULL Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: max8925: Add irqdomain for dtQing Xu2-33/+76
Add irqdomains for max8925's main irq, wrap irq register operations into irqdomain's map func. it is necessary for dt support. Also, add dt support for max8925 driver. Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: vexpress: Allow vexpress-sysreg to self-initialiseCatalin Marinas1-4/+6
The vexpress_sysreg_init() is a core_initcall() already and it can trigger the early initialisation if a matching node is found. This patch allows the SoC code to avoid calling vexpress_sysreg_of_early_init() explicitly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Support RTS5227Roger Tseng4-1/+241
Support new model RTS5227. Signed-off-by: Roger Tseng <rogerable@realtek.com> Reviewed-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Implement driving adjustment to device-dependent callbacksRoger Tseng3-3/+29
Implement different ways of selecting driving capability(a necessary adjustment along with voltage change). It was origionally in device-independent mmc/host/rtsx_pci_sdmmc.c. Moving it here to support devices which may have a different way of adjustment. Signed-off-by: Roger Tseng <rogerable@realtek.com> Reviewed-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: vexpress: Add pseudo-GPIO based LEDsPawel Moll1-18/+55
The LEDs on the Versatile Express motherboard are controlled through simple memory-mapped register. This patch extends the pseudo-GPIO controller definition for these lines and creates generic "leds-gpio" device using them Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: ab8500: Rename ab8500 to abx500 for hwmon driverHongbo Zhang1-3/+3
We are using a generic abx500 hwmon layer, so rename specific ab8500 to generic abx500 for hwmon device and driver matching. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Optimize card detect flowWei WANG1-12/+19
1. Schedule card detect work at the end of the ISR 2. Callback function ops->cd_deglitch may delay for a period of time. It is not proper to call this callback when local irq disabled. 3. Card detect flow can't be executed in parallel with other card reader operations, so it's better to be protected by mutex. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Use macros to replace some variablesWei WANG2-9/+7
In function rtsx_pci_switch_clock, some variables, such as min_n, max_n, and max_div, are not necessary. And those assigned values look very obscure for others. It's more proper to use macro definitions here to replace these variables. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Fix checkpatch warningWei WANG1-13/+13
WARNING: Avoid CamelCase: <min_N> + u8 N, min_N, max_N, clk_divider; WARNING: Avoid CamelCase: <max_N> + u8 N, min_N, max_N, clk_divider; Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Declare that the DMA address limitation is 32bit explicitlyWei WANG1-0/+4
Realtek PCIe card reader only supports 32bit DMA. This declaration can improve the readability. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Remove redundant codeWei WANG1-1/+0
In function rtsx_pci_add_sg_tbl, the statement "ptr++" is useless. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: tps65090: remove suspend/resume callbacksLaxman Dewangan1-23/+0
The tps65090 mfd driver implement the suspend/resume callbacks which just disable and enable irqs in suspend/resume respectively. This operation is already done in irq suspend and irq_resume and hence it is not require to implement the same in the driver. Remove this non-require code. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: tps65090: Pass irq domain when adding mfd sub devicesLaxman Dewangan1-1/+1
When device is get added through DT then irq_base is 0 (zero) and in this case regmap_irq_chip_get_base() generates warning. The interrupt of this device get added through irq_domain_add_linear() when irq_base is 0. Hence pass the irq domain in place of base_irq when calling mfd_add_devices(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: tps65090: add DT support for tps65090Laxman Dewangan1-3/+19
Add device tree support for the TI PMIC TPS65090. The device can be registered through platform or DT. Add device tree binding document for this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: wm5102: Make DSP scratch registers readableMark Brown1-0/+8
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: tps6507x: Add DT supportVishwanathrao Badarkhe, Manish1-0/+9
Add device tree based initialization support for TI's tps6507x mfd device. Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: 88pm80x: Remove redundant devm_* callsYi Zhang3-27/+9
devm_* functions are device managed and make error handling and code simpler; it also fix error exit paths Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: db8500-prcmu: Add ux500_wdt mfd_cellFabio Baltieri1-0/+12
This patch adds the necessary structures to use the watchdog functionality of PRCMU. The watchdog driver is named ux500_wdt. Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>