summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2014-05-08mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"Micky Ching1-91/+41
This reverts commit c42deffd5b53c9e583d83c7964854ede2f12410d. commit <mmc: rtsx: add support for pre_req and post_req> did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-09Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds1-41/+91
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
2014-04-07Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds60-2022/+2197
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-25/+36
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-04-01Merge tag 'regulator-v3.15' of ↵Linus Torvalds2-15/+194
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This release has lots and lots of small cleanups and fixes in the regulator subsystem, mainly cleaning up some bad patterns that got duplicated in DT code, but otherwise very little of note outside of the scope of the relevant drivers: - Support for configuration of the initial state for gpio regulators with multi-voltage support. - Support for calling regulator_set_voltage() on fixed regulators. - New drivers for Broadcom BCM590xx, Freescale pfuze200, Samsung S2MPA01 & S2MPS11/4, some PWM controlled regulators found on some ST boards and TI TPS65218" * tag 'regulator-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (154 commits) regulator: aat2870: Use regulator_map_voltage_ascend regulator: st-pwm: Convert to get_voltage_sel regulator: Add new driver for ST's PWM controlled voltage regulators regulator: bcm590xx: Remove **rdev from struct bcm590xx_reg regulator: bcm590xx: Make the modalias matches the driver name regulator: s5m8767: Convert to use regulator_[enable|disable|is_enabled]_regmap regulator: db8500-prcmu: Set 1.8V as a fixed voltage for vsmps2 regulator: s2mps11: Add missing of_node_put regulator: s2mps11: Use of_get_child_by_name Documentation: mfd: s2mps11: Document support for S2MPS14 regulator: s2mps11: Add set_suspend_disable for S2MPS14 regulator: s2mps11: Add support for S2MPS14 regulators regulator: max8660: Fix brace alignment regulator: dbx500: use seq_puts() instead of seq_printf() regulator: dbx500-prcmu: Silence checkpatch warnings regulator: anatop: Remove checking control_reg in [set|get]_voltage_sel regulator: max8952: Silence checkpatch warning regulator: max8925: Silence checkpatch warning regulator: max8660: Silence checkpatch warnings regulator: arizona-ldo1: Correct default regulator init_data ...
2014-03-31mfd: wm5110: Correct default for HEADPHONE_DETECT_1Charles Keepax1-1/+1
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-31mfd: arizona: Mark DSP clocking register as volatileCharles Keepax2-0/+5
The DSPs will often control there own clock speeds whilst running as such we should mark the registers controlling this as volatile. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-28Merge remote-tracking branches 'regmap/topic/cache', 'regmap/topic/irq', ↵Mark Brown2-21/+4
'regmap/topic/lock', 'regmap/topic/mmio', 'regmap/topic/nodev', 'regmap/topic/parse-val' and 'regmap/topic/patch' into regmap-next
2014-03-20mfd: kempld-core: Fix potential hang-up during bootGuenter Roeck1-2/+5
On PXT and COMe-cPC2 boards it is observed that the hardware mutex is acquired but not being released during initialization. This can result in a hang-up during boot if the driver is built into the kernel. Releasing the mutex twice if it was acquired fixes the problem. Subsequent request/release cycles work as expected, so the fix is only needed during initialization. Cc: <stable@vger.kernel.org> Reviewed-by: Michael Brunner <michael.brunner@kontron.com> Tested-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-20mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01Krzysztof Kozlowski1-0/+7
Initialize the 'regmap_rtc' on S2MPA01 to some sane value. Sane at least for S5M87X chipsets, not S2MPS/S2MPA but it won't be used because rtc-s5m driver does not support S2MPA01. This fixes following error: drivers/mfd/sec-core.c:342:45: warning: ‘regmap_rtc’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices failKrzysztof Kozlowski1-0/+1
The tps65910_i2c_probe() allocates regmap_irq_chip in tps65910_irq_init() but it does not clean this up in case of mfd_add_devices() failure. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: tps65910: Fix possible invalid pointer dereference on ↵Krzysztof Kozlowski1-1/+3
regmap_add_irq_chip fail Fixes: 4aab3fadad32 ("mfd: tps65910: Move interrupt implementation code to mfd file") tps65910_irq_init() sets 'tps65910->chip_irq' before calling regmap_add_irq_chip(). If the regmap_add_irq_chip() call fails in memory allocation of regmap_irq_chip_data members then: 1. The 'tps65910->chip_irq' will still hold some value 2. 'tps65910->irq_data' will be pointing to already freed memory (because regmap_add_irq_chip() will free it on error) This results in invalid memory access during driver remove because the tps65910_irq_exit() tests whether 'tps65910->chip_irq' is not zero. Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: sec-core: Fix I2C dummy device resource leak on probe failureKrzysztof Kozlowski1-3/+4
Dummy I2C device allocated in sec_pmic_probe() leaked if devm_regmap_init_i2c() failed. Unregister it before returning from probe. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: sec-core: Add of_compatible strings for clock MFD cellsKrzysztof Kozlowski1-0/+3
Add of_compatible strings for S5M8767 and S2MPS14 clock MFD cells. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: Remove obsolete ti-ssp driverArnd Bergmann3-476/+0
The tnetv107x platform is getting removed, so this driver is not needed any more. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: bcm590xx: Fix type argument for module device tableAxel Lin1-1/+1
This fixes below build error. FATAL: drivers/mfd/bcm590xx: sizeof(struct i2c_device_id)=24 is not a modulo of the size of section __mod_i2c_device_table=392. Fix definition of struct i2c_device_id in mod_devicetable.h make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Add support for Intel Bay Trail SoCPeter Tyser1-0/+6
This patch adds the LPC Controller Device IDs for Watchdog and GPIO for the Intel Bay Trail Atom SoC. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Add support for NM10 GPIOPeter Tyser1-0/+1
The NM10's GPIO is compatible with ICH v7 GPIO. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Dan Weinlader <danw@vs-networks.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Change Avoton to iTCO v3Peter Tyser1-1/+1
The register layout of the Avoton is compatible with the iTCO v3 register layout. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Rajat Jain <rajatjain@juniper.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Add support for iTCO v3Peter Tyser1-14/+67
Some newer Atom CPUs, eg Avoton and Bay Trail, use slightly different register layouts for the iTCO than the current v1 and v2 iTCO. Differences from previous iTCO versions include: - The ACPI space is enabled in the "ACPI base address" register instead of the "ACPI control register" - The "no reboot" functionality is set in the "Power Management Configuration" register instead of the "General Control and Status" (GCS) register or PCI configuration space. - The "ACPI Control Register" is not present on v3. The "Power Management Configuration Base Address" register resides at the same address is Avoton/Bay Trail. To differentiate these newer chipsets create a new v3 iTCO version and update the MFD driver to support them. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Rajat Jain <rajatjain@juniper.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Remove lpc_ich_cfg struct usePeter Tyser1-31/+32
Future chipsets will use different register layouts that don't map cleanly to the lpc_ich_cfg fields. Remove the lpc_ich_cfg struct and add explicit fields to the higher level lpc_ich_priv structure. This change should have no functional impact. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Rajat Jain <rajatjain@juniper.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Only configure watchdog or GPIO when presentPeter Tyser1-6/+10
Some chipsets don't currently have GPIO support enabled. For these chipsets don't go through the process of initializing the GPIO region. Make the same change for the watchdog initialization for chipsets which may not enable the WDT in the future. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Rajat Jain <rajatjain@juniper.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Fix ACPI enable bitmaskPeter Tyser1-1/+1
The original bitmask of 0x10 was incorrect and would result in a write to a reserved read-only bit instead of enabling the ACPI I/O region. Update it to the proper value of 0x80. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Rajat Jain <rajatjain@juniper.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: Add bcm590xx pmu driverMatt Porter3-0/+102
Add a driver for the BCM590xx PMU multi-function devices. The driver initially supports regmap initialization and instantiation of the voltage regulator device function of the PMU. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max14577: Select REGMAP_IRQKrzysztof Kozlowski1-0/+1
MAXIM 14577 MFD driver uses the regmap_irq_chip so it's Kconfig entry should select REGMAP_IRQ. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: twl-core: Fix accessibility of some twl4030 audio registersTomas Novotny1-5/+5
There are some unused registers in twl4030 at I2C address 0x49 and function twl4030_49_nop_reg() is used to check accessibility of that registers. These registers are written in decimal format but the values are correct in hexadecimal format. (It can be checked few lines above the patched code - these registers are marked as unused there.) As a consequence three registers of audio submodule are treated as inaccessible (preamplifier carkit right and both handsfree registers). Cc: stable@vger.kernel.org Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: tps65218: Fix reported randconfig errorLee Jones1-0/+1
Reported error was: ERROR: "regmap_del_irq_chip" [drivers/mfd/tps65218.ko] undefined! when CONFIG_REGMAP_IRQ is not enabled. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: syscon: Simplify syscon_match_pdevname()Alexander Shiyan1-7/+0
Since we do not want to add new platform IDs for the syscon driver, there is no reason to iterate over IDs. This patch simplifies syscon_match_pdevname() function to remove such iteration. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8921: Fixup probe() error path when irq invalidJosh Cartwright1-2/+1
platform_get_irq() returns a negative error code when an IRQ is invalid or unspecified. Make 'irq' signed to properly handle this. Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: da9055: Add DT support for PMICAdam Thomson1-0/+8
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: vexpress: Staticize vexpress_config_bridgesSachin Kamat1-1/+1
vexpress_config_bridges is local to this file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: as3722: Make FUSE7_REG readableStephen Warren1-0/+1
The FUSE7_REG register is not currently marked readable. This causes as3722_sd0_is_low_voltage() to emit an error during boot, and assume the range of the SD0 regulator: as3722-regulator as3722-regulator: Reg 0xa7 read failed: -5 Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read") [exposed the bug, by checking for readability] Fixes: 762a8ee80897 ("regulator: as3722: detect SD0 low-voltage mode") [left out this register from the readable list] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8921: Use IRQCHIP_SKIP_SET_WAKEStephen Boyd1-7/+1
We don't need to implement a dummy irq_set_wake op if we just set IRQCHIP_SKIP_SET_WAKE. Suggested-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8921: Drop irq_set_lockdep_class() codeStephen Boyd1-3/+0
This isn't necessary as we aren't setting the summary interrupt to wake up the system in the irq_wake() callback. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: mc13xxx: Add missing spi_setup()Alexander Shiyan1-0/+3
The probe routine should call spi_setup() to configure the SPI bus so it can properly communicate with the device. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: mc13xxx: Limit maximum SPI speedAlexander Shiyan1-0/+2
The patch adds the maximum speed limit in accordance with the PMIC datasheet if other value is not given in the devicetree description or board data. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: timberdale: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-1/+1
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: ucb1x00-core: Use SIMPLE_DEV_PM_OPS macroJingoo Han1-3/+1
Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8921: Loosen Kconfig dependencyStephen Boyd1-1/+1
Allow this driver to be compiled on all ARM builds as it doesn't rely on anything within arm/mach-msm. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8921: Add DT match tableStephen Boyd1-0/+8
Allow this driver to probe based on devicetree. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8921: Use ssbi regmapStephen Boyd2-28/+39
Use a regmap so that the pm8xxx read/write APIs can be removed once all consumer drivers are converted. Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8921: Migrate to irqdomainsStephen Boyd2-123/+76
Convert this driver to use irqdomains so that the PMIC's child devices can be converted to devicetree. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-03-19mfd: pm8921: Update for genirq changesStephen Boyd2-3/+5
Since this code has been marked broken for some time a few genirq tree wide changes weren't made. set_irq_wake() was renamed to irq_set_irq_wake() in commit a0cd9ca2b (genirq: Namespace cleanup, 2011-02-10) and commit 10a8c383 (irq: introduce entry and exit functions for chained handlers) introduced the chained irq functions but this driver wasn't updated to use them. Fix these problems and remove the BROKEN marking on this driver. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8xxx: Move pm8xxx-irq.c contents into only driver that uses itStephen Boyd4-382/+348
The pm8xxx-irq.c code is practically mandatory given that the pm8921-core driver will WARN about it missing and the Kconfig marks it as default y when a PM8xxx chips is enabled. The only reason the file was split out was because we planned to support other pm8xxx chips with different pm8xxx-core.c files. Now that we have DT on ARM this isn't necessary because we should be able to support all the ssbi based PM8xxx chips in one driver and one file with no data bloat. Let's move this code into the only driver that uses it right now (pm8921) so that it's always compiled when needed. In the future we can rename pm8921-core.c to something more generic. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: twl6040: Check for error when reading revision registerFlorian Vaussard1-0/+5
We may have an error when reading the revision register, so check for the returned value. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: twl6040: Remove duplicate register writeFlorian Vaussard1-1/+0
When probing, regmap_register_patch() will bypass the cache and perform i2c writes for the given patches. It is thus unnecessary to manually set the TWL6040_REG_ACCCTL register just before, as it will be done when registering the twl6040_patch. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: da9052: Add new DA9053 BC chip variantOpensource [Anthony Olech]2-1/+5
Add support for a new BC variant of the DA9053 PMIC. There is one difference between it and the AA, BA and BB. This patch also corrects a typing mistake in one of the BA name strings that was incorrectly typed as "ab". Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: syscon: Move diagnostic messages to dev_dbg()Alexander Shiyan1-1/+1
This patch moves diagnostic messages used for debugging purposes to dev_dbg(). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: kempld: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron ↵Michael Brunner2-0/+29
PLD driver This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6 and COMe-cHL6 to the Kontron PLD driver. The list of supported products in the module description is also updated. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Acked-by: Christian Rauch <christian.rauch@kontron.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Add support for Intel Avoton GPIOsVincent Donnefort1-0/+1
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 09:30:23 +0000