summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds6-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-14Merge tag 'mfd-for-linus-4.5' of ↵Linus Torvalds50-805/+2143
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for s2mps15; sec-core - Add support for Lewisburg; lpc_ich - Add support for cs47l24 and wm1831; arizona New Functionality: - Allow user to select syscon register width; syscon Fix-ups: - Lots of Checkpatch fixes - Rename -pmic/-regulator; s2mps11 - Build driver components into a single module; wm8994-* - Better handing of IRQ during suspend/resume; as3722 - Constify things; da903x - Remove unused code; ab8500-core - Improve error handing; qcom_rpm - Simplify code: wm831x-otp, sta2x11-mfd - Improve locking; cros_ec_spi - Fix incorrect DT binding filename reference; arizona, palmas, snps-dwapb-gpio, wm8994 Bug Fixes: - Fix broken SYSFS 'show ID' call; wm831x-otp - Protect reads from non-existent registers; qcom-spmi-pmic - Repair build warnings; as3722 - Fix IRQ request ordering; arizona-irq - Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb, htc-egpio, dm355evm_msp, asic3" * tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (58 commits) mfd: davinci_voicecodec: Remove pointless 'out of memory' error message mfd: da9052-irq: Fix trivial 'space before comma' error mfd: da9052-i2c: Fix tabbing/whitespace issue mfd: da903x: Fix white space and split string issues mfd: cs5535-mfd: Add missing line spacing and make local array static mfd: cros_ec_spi: Repair comparison ordering issue mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue. mfd: asic3: Fix a plethora of Checkpatch errors and warnings mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings mfd: arizona-i2c: Add blank line formatting after declaration mfd: arizona-core: msleep() is unreliable for anything <20ms use usleep_range() instead mfd: adp5520: Some trivial 'no space before tab' fixes mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issues mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting mfd: ab8500-core: Fix many warnings reported by Checkpatch mfd: ab2100-otp: Remove pointless 'out of memory' error message mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch mfd: aat2870-core: Remove unnecessary 'out of memory' message mfd: 88pm860x-core: Fix commenting and declaration spacing ...
2016-01-14mfd: davinci_voicecodec: Remove pointless 'out of memory' error messageLee Jones1-4/+1
WARNING: Possible unnecessary 'out of memory' message + if (!davinci_vc) { + dev_dbg(&pdev->dev, total: 0 errors, 1 warnings, 154 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: da9052-irq: Fix trivial 'space before comma' errorLee Jones1-1/+1
ERROR: space prohibited before that ',' (ctx:WxW) + da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052); total: 1 errors, 0 warnings, 290 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: da9052-i2c: Fix tabbing/whitespace issueLee Jones1-1/+1
WARNING: suspect code indent for conditional statements (8, 24) + if (!i2c_safe_reg(reg)) + return regmap_read(da9052->regmap, total: 0 errors, 1 warnings, 226 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: da903x: Fix white space and split string issuesLee Jones1-5/+5
While we're at it, let's also match the MODULE_LICENSE with the header. WARNING: please, no space before tabs + * ^IMike Rapoport <mike@compulab.co.il>$ WARNING: please, no space before tabs + * ^IEric Miao <eric.miao@marvell.com>$ WARNING: quoted string split across lines +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" + "Mike Rapoport <mike@compulab.co.il>"); total: 0 errors, 3 warnings, 574 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: cs5535-mfd: Add missing line spacing and make local array staticLee Jones1-1/+5
WARNING: Missing a blank line after declarations + struct resource *res; + res = platform_get_resource(pdev, IORESOURCE_IO, 0); WARNING: char * array declaration might be better as static const + const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" }; total: 0 errors, 2 warnings, 192 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: cros_ec_spi: Repair comparison ordering issueLee Jones1-2/+2
WARNING: Comparisons should place the constant on the right side of the test + BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size); WARNING: Comparisons should place the constant on the right side of the test + BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size); total: 0 errors, 2 warnings, 731 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue.Lee Jones1-1/+1
ERROR: code indent should use tabs where possible + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ WARNING: please, no space before tabs + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ WARNING: please, no spaces at the start of a line + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ total: 1 errors, 2 warnings, 366 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: asic3: Fix a plethora of Checkpatch errors and warningsLee Jones1-15/+12
ERROR: Macros with complex values should be enclosed in parentheses +#define INIT_CDEX(_name, _rate) \ + [ASIC3_CLOCK_##_name] = { \ + .cdex = CLOCK_CDEX_##_name, \ + .rate = _rate, \ + } WARNING: line over 80 characters + ASIC3_GPIO_INT_STATUS); WARNING: void function return statements are not generally useful + return; +} WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: line over 80 characters + asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) + WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then p r_err(... to printk(KERN_ERR ... + printk(KERN_ERR "kzalloc failed\n"); WARNING: Possible unnecessary 'out of memory' message + if (asic == NULL) { + printk(KERN_ERR "kzalloc failed\n"); WARNING: Missing a blank line after declarations + int retval = 0; + retval = platform_driver_probe(&asic3_device_driver, asic3_probe); total: 1 errors, 13 warnings, 1081 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: as3711: Repair OOM and 'line over 80 chars' formatting warningsLee Jones1-12/+16
WARNING: Possible unnecessary 'out of memory' message + if (!pdata) { + dev_err(&client->dev, "Failed to allocate pdata\n"); WARNING: Possible unnecessary 'out of memory' message + if (!as3711) { + dev_err(&client->dev, "Memory allocation failed\n"); WARNING: line over 80 characters + dev_err(&client->dev, "regmap initialization failed: %d\n", ret); WARNING: line over 80 characters + /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */ WARNING: line over 80 characters + as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator; WARNING: line over 80 characters + as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator); WARNING: line over 80 characters + as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight; WARNING: line over 80 characters + as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight); total: 0 errors, 8 warnings, 236 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: arizona-i2c: Add blank line formatting after declarationLee Jones1-0/+2
WARNING: Missing a blank line after declarations + struct arizona *arizona = dev_get_drvdata(&i2c->dev); + arizona_dev_exit(arizona); total: 0 errors, 1 warnings, 120 lines checked Cc: patches@opensource.wolfsonmicro.com Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: arizona-core: msleep() is unreliable for anything <20ms use ↵Lee Jones1-4/+4
usleep_range() instead WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(5); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); total: 0 errors, 4 warnings, 1407 lines checked Cc: patches@opensource.wolfsonmicro.com Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: adp5520: Some trivial 'no space before tab' fixesLee Jones1-3/+3
WARNING: please, no space before tabs + * ^IMike Rapoport <mike@compulab.co.il>$ WARNING: please, no space before tabs + * ^IEric Miao <eric.miao@marvell.com>$ WARNING: please, no space before tabs +^I.id_table ^I= adp5520_id,$ total: 0 errors, 3 warnings, 365 lines checked Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issuesLee Jones1-7/+6
WARNING: char * array declaration might be better as static const + static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"}; WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO WARNING: quoted string split across lines + "Charger \"%s\" is connected with known battery." + " Rebooting.\n", WARNING: quoted string split across lines + "unable to set sysClkReq%dRfClkBuf: " + "%d\n", j + 1, ret); total: 0 errors, 4 warnings, 199 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one errorLee Jones1-72/+73
WARNING: line over 80 characters +#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ib t*/ WARNING: line over 80 characters +#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/ WARNING: suspect code indent for conditional statements (16, 20) + if (!strcmp(name, dev_name(gpadc->dev))) + return gpadc; WARNING: suspect code indent for conditional statements (0, 16) +if (ad_value < 0) { + dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", WARNING: quoted string split across lines + dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:" + " %d AD: 0x%x\n", channel, ad_value); WARNING: Missing a blank line after declarations + int raw_data; + raw_data = ab8500_gpadc_double_read_raw(gpadc, channel, WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(10); ERROR: else should follow close brace '}' + } + else WARNING: line over 80 characters + delay_max = 10000; /* large range to optimise sleep mode */ WARNING: line over 80 characters + gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain; WARNING: line over 80 characters + gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL); WARNING: Possible unnecessary 'out of memory' message + if (!gpadc) { + dev_err(&pdev->dev, "Error: No memory\n"); WARNING: space prohibited before semicolon + return ; WARNING: void function return statements are not generally useful + return ; +} WARNING: quoted string split across lines +MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson," + "M'boumba Cedric Madianga"); total: 1 errors, 14 warnings, 1089 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formattingLee Jones1-10/+15
WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * the output is wanted in any case */ WARNING: Consecutive strings are generally better as a single string + " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", total: 0 errors, 4 warnings, 3331 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: ab8500-core: Fix many warnings reported by CheckpatchLee Jones1-14/+10
WARNING: Block comments use a trailing */ on a separate line + * */ WARNING: Block comments use a trailing */ on a separate line + * bank on higher 8 bits and reg in lower */ WARNING: Block comments use a trailing */ on a separate line + * bank on higher 8 bits and reg in lower */ WARNING: suspect code indent for conditional statements (8, 24) + if (unlikely(*offset == 17)) + *offset = 24; WARNING: suspect code indent for conditional statements (8, 24) + if (unlikely(*offset == 16)) + *offset = 25; WARNING: suspect code indent for conditional statements (8, 24) + if ((i == 3) && (*offset >= 24)) + *offset += 2; WARNING: ENOSYS means 'invalid syscall nr' and nothing else + return -ENOSYS; WARNING: static const char * array should probably be static const char * const + static const char *switch_off_status[] = { WARNING: static const char * array should probably be static const char * const + static const char *turn_on_status[] = { total: 0 errors, 9 warnings, 1867 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: ab2100-otp: Remove pointless 'out of memory' error messageLee Jones1-3/+2
WARNING: Possible unnecessary 'out of memory' message + if (!otp) { + dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n"); total: 0 errors, 1 warnings, 250 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: ab3100-core.c: Fix multiple warnings reported by CheckpatchLee Jones1-13/+10
WARNING: Missing a blank line after declarations + struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); + if (!ab3100->startup_events_read) WARNING: Possible unnecessary 'out of memory' message + if (!ab3100) { + dev_err(&client->dev, "could not allocate AB3100 device\n"); WARNING: else is not generally useful after a break or return + break; + } else { total: 0 errors, 3 warnings, 996 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: aat2870-core: Remove unnecessary 'out of memory' messageLee Jones1-4/+1
WARNING: Possible unnecessary 'out of memory' message + if (!aat2870) { + dev_err(&client->dev, total: 0 errors, 1 warnings, 524 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: 88pm860x-core: Fix commenting and declaration spacingLee Jones1-3/+6
Checkpatch output: WARNING: Block comments use a trailing */ on a separate line + * - turn off */ WARNING: Missing a blank line after declarations + int ret; + ret = i2c_add_driver(&pm860x_driver); total: 0 errors, 2 warnings, 1283 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: Use to_i2c_client() instead of open-coding itGeliang Tang10-24/+24
Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: asic3: Be sure to clamp return valueLinus Walleij1-1/+2
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: dm355evm_mps: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: htc-egpio: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: tc6393xb: Be sure to clamp return valueLinus Walleij1-2/+2
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: tps65010: Be sure to clamp return valueLinus Walleij1-2/+2
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. This also start to propagate the negative error code from the smbus call if there is one, as the last commit of this series will make the gpiolib core deal with that properly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-12Merge tag 'pm+acpi-4.5-rc1-1' of ↵Linus Torvalds5-14/+74
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull oower management and ACPI updates from Rafael Wysocki: "As far as the number of commits goes, ACPICA takes the lead this time, followed by cpufreq and the device properties framework changes. The most significant new feature is the debugfs-based interface to the ACPICA's AML debugger added in the previous cycle and a new user space tool for accessing it. On the cpufreq front, the core is updated to handle governors more efficiently, particularly on systems where a single cpufreq policy object is shared between multiple CPUs, and there are quite a few changes in drivers (intel_pstate, cpufreq-dt etc). The device properties framework is updated to handle built-in (ie included in the kernel itself) device properties better, among other things by adding a fallback mechanism that will allow drivers to provide default properties to be used in case the plaform firmware doesn't provide the properties expected by them. The Operating Performance Points (OPP) framework gets new DT bindings and debugfs support. A new cpufreq driver for ST platforms is added and the ACPI driver for AMD SoCs will now support the APM X-Gene ACPI I2C device. The rest is mostly fixes and cleanups all over. Specifics: - Add a debugfs-based interface for interacting with the ACPICA's AML debugger introduced in the previous cycle and a new user space tool for that, fix some bugs related to the AML debugger and clean up the code in question (Lv Zheng, Dan Carpenter, Colin Ian King, Markus Elfring). - Update ACPICA to upstream revision 20151218 including a number of fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng, Labbe Corentin, Prarit Bhargava, Colin Ian King, David E Box, Rafael Wysocki). In particular, the previously added erroneous support for the _SUB object is dropped, the concatenate operator will support all ACPI objects now, the Debug Object handling is improved, the SuperName handling of parameters being control methods is fixed, the ObjectType operator handling is updated to follow ACPI 5.0A and the handling of CondRefOf and RefOf is updated accordingly, module- level code will be executed after loading each ACPI table now (instead of being run once after all tables containing AML have been loaded), the Operation Region handlers management is updated to fix some reported problems and a the ACPICA code in the kernel is more in line with the upstream now. - Update the ACPI backlight driver to provide information on whether or not it will generate key-presses for brightness change hotkeys and update some platform drivers (dell-wmi, thinkpad_acpi) to use that information to avoid sending double key-events to users pace for these, add new ACPI backlight quirks (Hans de Goede, Aaron Lu, Adrien Schildknecht). - Improve the ACPI handling of interrupt GPIOs (Christophe Ricard). - Fix the handling of the list of device IDs of device objects found in the ACPI namespace and add a helper for checking if there is a device object for a given device ID (Lukas Wunner). - Change the logic in the ACPI namespace scanning code to create struct acpi_device objects for all ACPI device objects found in the namespace even if _STA fails for them which helps to avoid device enumeration problems on Microsoft Surface 3 (Aaron Lu). - Add support for the APM X-Gene ACPI I2C device to the ACPI driver for AMD SoCs (Loc Ho). - Fix the long-standing issue with the DMA controller on Intel SoCs where ACPI tables have no power management support for the DMA controller itself, but it can be powered off automatically when the last (other) device on the SoC is powered off via ACPI and clean up the ACPI driver for Intel SoCs (acpi-lpss) after previous attempts to fix that problem (Andy Shevchenko). - Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King, Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki, Sinan Kaya). - Update the device properties framework for better handling of built-in properties, add support for built-in properties to the platform bus type, update the MFD subsystem's handling of device properties and add support for passing default configuration data as device properties to the intel-lpss MFD drivers, convert the designware I2C driver to use the unified device properties API and add a fallback mechanism for using default built-in properties if the platform firmware fails to provide the properties as expected by drivers (Andy Shevchenko, Mika Westerberg, Heikki Krogerus, Andrew Morton). - Add new Device Tree bindings to the Operating Performance Points (OPP) framework and update the exynos4412 DT binding accordingly, introduce debugfs support for the OPP framework (Viresh Kumar, Bartlomiej Zolnierkiewicz). - Migrate the mt8173 cpufreq driver to the new OPP bindings (Pi-Cheng Chen). - Update the cpufreq core to make the handling of governors more efficient, especially on systems where policy objects are shared between multiple CPUs (Viresh Kumar, Rafael Wysocki). - Fix cpufreq governor handling on configurations with CONFIG_HZ_PERIODIC set (Chen Yu). - Clean up the cpufreq core code related to the boost sysfs knob support and update the ACPI cpufreq driver accordingly (Rafael Wysocki). - Add a new cpufreq driver for ST platforms and corresponding Device Tree bindings (Lee Jones). - Update the intel_pstate driver to allow the P-state selection algorithm used by it to depend on the CPU ID of the processor it is running on, make it use a special P-state selection algorithm (with an IO wait time compensation tweak) on Atom CPUs based on the Airmont and Silvermont cores so as to reduce their energy consumption and improve intel_pstate documentation (Philippe Longepe, Srinivas Pandruvada). - Update the cpufreq-dt driver to support registering cooling devices that use the (P * V^2 * f) dynamic power draw formula where V is the voltage, f is the frequency and P is a constant coefficient provided by Device Tree and update the arm_big_little cpufreq driver to use that support (Punit Agrawal). - Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq, blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia, Jacob Tanenbaum, Markus Elfring). - cpuidle core tweaks related to polling and measured_us calculation (Rik van Riel). - Removal of modularity from a few cpuidle drivers (clps711x, ux500, exynos) that cannot be built as modules in practice (Paul Gortmaker). - PM core update to prevent devices from being probed during system suspend/resume which is generally problematic and may lead to inconsistent behavior (Grygorii Strashko). - Assorted updates of the PM core and related code (Julia Lawall, Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki, Ulf Hansson). - PNP bus type updates (Christophe Le Roy, Heiner Kallweit). - PCI PM code cleanups (Jarkko Nikula, Julia Lawall). - cpupower tool updates (Jacob Tanenbaum, Thomas Renninger)" * tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (177 commits) PM / clk: don't leave clocks enabled when driver not bound i2c: dw: Add APM X-Gene ACPI I2C device support ACPI / APD: Add APM X-Gene ACPI I2C device support ACPI / LPSS: change 'does not have' to 'has' in comment Revert "dmaengine: dw: platform: provide platform data for Intel" dmaengine: dw: return immediately from IRQ when DMA isn't in use dmaengine: dw: platform: power on device on shutdown ACPI / LPSS: override power state for LPSS DMA device PM / OPP: Use snprintf() instead of sprintf() Documentation: cpufreq: intel_pstate: enhance documentation ACPI, PCI, irq: remove redundant check for null string pointer ACPI / video: driver must be registered before checking for keypresses cpufreq-dt: fix handling regulator_get_voltage() result cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC PM / sleep: Add support for read-only sysfs attributes ACPI: Fix white space in a structure definition ACPI / SBS: fix inconsistent indenting inside if statement PNP: respect PNP_DRIVER_RES_DO_NOT_CHANGE when detaching ACPI / PNP: constify device IDs ACPI / PCI: Simplify acpi_penalize_isa_irq() ...
2016-01-11mfd: ucb1x00-core: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: arizona: Add device tree binding to specify mono outputsCharles Keepax1-0/+10
Add device tree bindings to support specifying outputs from the chip as mono outputs. Whilst we are doing it change the out_mono pdata from a bool to an int, because Sparse gets upset about using ARRAY_SIZE on bools. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: da9063: Allow modular buildGeert Uytterhoeven1-1/+1
Allow support for the DA9063 PMIC to be modular, cfr. DA9062, which allows to decrease size of multi-platform kernels (e.g. multi_v7_defconfig). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: arizona: Request parent IRQ before we request child IRQsCharles Keepax1-30/+27
Currently the driver requests the boot done and control interface IRQs before it has requested its own IRQ line. This can cause problems on edge triggered IRQ systems as if an edge occurs before the parent IRQ is enabled it will be missed. Whilst we are changing the error handling remove an unused label as well. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: as3722: Mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
The newly introduced as3722_i2c_suspend/resume functions are built unconditionally, but only used when power management is enabled, so we get a warning otherwise: drivers/mfd/as3722.c:427:12: warning: 'as3722_i2c_suspend' defined but not used [-Wunused-function] drivers/mfd/as3722.c:438:12: warning: 'as3722_i2c_resume' defined but not used [-Wunused-function] This marks them both as __maybe_unused, which avoids an ugly #ifdef and gives us best compile-time coverage. When they are unused, the compiler will silently drop the functions from its output. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 35deff7eb212 ("mfd: as3722: Handle interrupts on suspend") Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: sta2x11: Use platform_register/unregister_drivers()Thierry Reding1-26/+10
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: qcom-spmi-pmic: Don't access non-existing registersIvan T. Ivanov1-1/+3
Revision ID registers are available only on devices with Slave IDs that are even, so don't make access to unavailable registers. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> [sboyd@codeaurora.org: Consider all slave ids that are even] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: wm831x: Fix broken wm831x_unique_id_showRasmus Villemoes1-8/+2
wm831x_unique_id_show currently displays an interesting pattern of '0' and '3' characters which isn't very useful (figuring out why is left as an exercise for the reader). Presumably "buf[i]" should have been "id[i] & 0xff". But while there, it is much simpler to simply use %phN and do all the formatting at once. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: syscon: Add a DT property to set value widthDamien Riegel1-0/+13
Currently syscon has a fixed configuration of 32 bits for register and values widths. In some cases, it would be desirable to be able to customize the value width. For example, certain boards (like the ones manufactured by Technologic Systems) have a FPGA that is memory-mapped, but its registers are only 16-bit wide. This patch adds an optional "reg-io-width" DT binding for syscon that allows to change the width for the data bus (i.e. val_bits). If this property is provided, it will also set the register stride to reg-io-width's value. If not provided, the default configuration is used. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: wm5110: Correct defaults for micbias control registersCharles Keepax1-3/+3
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: cros ec: Lock the SPI bus while holding chipselectNicolas Boichat1-12/+18
cros_ec_cmd_xfer_spi and cros_ec_pkt_xfer_spi generally work like this: - Pull CS down (active), wait a bit, then send a command - Wait for response (multiple requests) - Wait a while, pull CS up (inactive) These operations, individually, lock the SPI bus, but there is nothing preventing the SPI framework from interleaving messages intended for other devices as the bus is unlocked in between. This is a problem as the EC expects CS to be held low for the whole duration. Solution: Lock the SPI bus during the whole transaction, to make sure that no other messages can be interleaved. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-05gpio: generic: factor into gpio_chip structLinus Walleij1-4/+4
The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-07mfd: intel-lpss: Pass HSUART configuration via propertiesAndy Shevchenko1-0/+13
The HS-UART host controller driver needs to know certain properties like width of the register set if it cannot get that information from ACPI or DT. In order to support non-ACPI systems we pass this information to the driver via device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-07mfd: intel-lpss: Pass SDA hold time to I2C host controller driverMika Westerberg2-10/+40
Intel Skylake the LPSS I2C pad circuit has internal delays that require programming non-zero SDA hold time for the I2C host controller. If this is not done communication to slave devices may fail with arbitration lost errors like the one seen below taken from Lenovo Yoga 900: i2c_hid i2c-SYNA2B29:00: Fetching the HID descriptor i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=20 00 i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration To fix this we follow what the Windows driver is doing and pass the default SDA hold time of 230 ns to all Intel Skylake host controllers. This still allows the platform to override these values by passing special ACPI methods SSCN and FMCN. Reported-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-07mfd: intel-lpss: Add support for passing device propertiesMika Westerberg2-4/+14
If the boot firmware does not support ACPI we need a way to pass device configuration information to the drivers. The unified device properties API already supports passing platform data via properties so let's take advantage of that and allow probe drivers to pass set of properties to the host controller driver. In order to do that we need to be able to modify the MFD cell corresponding the host controller, so make the core driver to take copy of the cell instead of using it directly. Then we can assign info->pset to the resulting copy of a cell and let the MFD core to assign that to the resulting device. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-07mfd: core: propagate device properties to sub devices driversAndy Shevchenko1-0/+7
In the similar way like we do for the platform data we propagate the device properties. For example, in case of Intel LPSS drivers we may provide a specific property to tell the actual device driver an additional information such as platform name. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-04mfd: arizona: Support Cirrus Logic CS47L24 and WM1831Richard Fitzgerald7-25/+1750
This patch adds the regmap configuration tables and core MFD handling for the CS47L24 and WM1831 codecs. Note that compared to the other Arizona codecs, these devices do not have an LDO1 or micsupp regulators, extcon driver, or the DCVDD isolation control. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-04mfd: qcom_rpm: Fix a possible NULL dereferenceLABBE Corentin1-0/+2
of_match_device could return NULL, and so cause a NULL pointer dereference later. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-04mfd: ab8500: Delete static IRQ resourcesLinus Walleij1-482/+0
The platforms that use the AB8500 define all IRQ resources in the device tree and they are automatically populated by matching the .of_compatible string. These static resources are just surplus baggage these days. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-04mfd: da903x: Constify da903x_chip_ops structureJulia Lawall1-2/+2
The da903x_chip_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-04mfd: mc13xxx-core: Use of_property_read_bool()Saurabh Sengar1-4/+4
For checking if a property is present or not, use of_property_read_bool instead of of_get_property() Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 06:27:53 +0000