summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2021-04-28Merge tag 'mfd-next-5.13' of ↵Linus Torvalds30-1542/+1468
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Add support for Software Nodes to MFD Core - Remove support for Device Properties from MFD Core - Use standard APIs in MFD Core New Drivers: - Add support for ROHM BD9576MUF and BD9573MUF PMICs - Add support for Netronix Embedded Controller, PWM and RTC - Add support for Actions Semi ATC260x PMICs and OnKey New Device Support: - Add support for DG1 PCIe Graphics Card to Intel PMT - Add support for ROHM BD71815 PMIC to ROHM BD71828 - Add support for Tolino Shine 2 HD to Netronix Embedded Controller - Add support for AX10 BMC Secure Updates to Intel M10 BMC Removed Device Support: - Remove Arizona Extcon support from MFD - Remove ST-E AB8500 Power Supply code from MFD - Remove AB3100 altogether New Functionality: - Add support for SMBus and I2C modes to Dialog DA9063 - Switch to using Software Nodes in Intel (various) New/converted Device Tree bindings: - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions atc260x, ricoh rn5t618, qcom pm8xxx - Fix-ups: - Fix error handling/path; intel_pmt - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997 - Use correct data-type; db8500-prcmu - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio - Regmap related fix-ups; intel-m10-bmc, sec-core - Reorder resource freeing during remove; intel_quark_i2c_gpio - Make table indexing more robust; intel_quark_i2c_gpio - Fix reference imbalances; arizona-irq - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930, intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio Bug Fixes: - Fix incorrect (register) values; intel-m10-bmc - Kconfig related fixes; ABX500_CORE - Do not clear the Auto Reload Register; stm32-timers" * tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits) mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell" mfd: twl: Remove unused inline function twl4030charger_usb_en() dt-bindings: mfd: Convert pm8xxx bindings to yaml dt-bindings: mfd: Add compatible for pmk8350 rtc i2c: designware: Get rid of legacy platform data mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000" mfd: arizona: Fix rumtime PM imbalance on error mfd: max8997: Replace 8998 with 8997 mfd: core: Use acpi_find_child_device() for child devices lookup mfd: intel_quark_i2c_gpio: Don't play dirty trick with const mfd: intel_quark_i2c_gpio: Enable MSI interrupt mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing mfd: ntxec: Support for EC in Tolino Shine 2 HD mfd: stm32-timers: Avoid clearing auto reload register mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions mfd: intel_quark_i2c_gpio: Remove unused struct device member mfd: intel_quark_i2c_gpio: Unregister resources in reversed order mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500 ...
2021-04-28Merge tag 'for-v5.13' of ↵Linus Torvalds1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "battery/charger driver changes: - core: - provide function stubs if CONFIG_POWER_SUPPLY=n - reduce loglevel for probe defer info - surface: - new battery and charger drivers for Surface - bq27xxx: - add bq78z100 support - fix current_now/power_avg for newer chips - cw2015: - add CHARGE_NOW support - ab8500: - drop pdata support - convert most DT bindings to YAML - lots of minor fixes and cleanups reset drivers: - ltc2952-poweroff: - make trigger delay configurable from DT - minor fixes and cleanups" * tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits) power: supply: cpcap-battery: fix invalid usage of list cursor power: supply: bq256xx: add kerneldoc for structure members power: supply: act8945a: correct kerneldoc power: supply: max17040: remove unneeded double cast power: supply: max17040: handle device_property_read_u8_array() failure power: supply: max14577: remove unneeded variable initialization power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static power: supply: surface-battery: Make some symbols static power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove() power: supply: generic-adc-battery: fix possible use-after-free in gab_remove() power: supply: Add AC driver for Surface Aggregator Module power: supply: Add battery driver for Surface Aggregator Module power: supply: bq25980: Move props from battery node power: supply: core: Use true and false for bool variable power: supply: goldfish: Remove the GOLDFISH dependency power: reset: ltc2952: make trigger delay configurable power: supply: cpcap-charger: Simplify bool conversion power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce ...
2021-04-26Merge tag 'hwmon-for-v5.13' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "The most notable change is the removal of the amd_energy driver. It was rendered all but unusable by making its attributes privileged-only to work around a security issue. A suggested remedy was rejected by AMD, so the only real solution was to remove the driver. For the future, we'll have to make sure that no privileged-access-only drivers are accepted into the hwmon subsystem in the first place. The hwmon ABI document was updated accordingly. Other changes: PMBus drivers: - Added driver for MAX15301 - Added driver for BluTek BPA-RS600 - Added driver for fsp-3y PSUs and PDUs - Added driver for Infineon IR36021 - Added driver for ST STPDDC60 - Added support for TI TPS53676 to tps53679 driver - Introduced PMBUS symbol namespace. This was made necessary by a suggestion to use its exported functions from outside the hwmon subsystem. - Minor improvements and bug fixes New drivers: - Driver for NZXT Kraken X42/X52/X62/X72 Driver enhancements: - Added support for Intel D5005 to intel-m10-bmc-hwmon driver - Added support for NCT6686D to nct6683 driver Other: - Converted sch5627 and amd9240 drivers to hwmon_device_register_with_info() - Added support for fan drawers capability and present registers to mlxreg-fan driver - Added Dell Latitude E7440 to fan control whitelist in dell-smm driver - Replaced snprintf in show functions with sysfs_emit. Done with coccinelle script for all drivers to preempt endless per-driver submissions of the same change. - Use kobj_to_dev(). Another coccinelle based change to preempt endless per-driver submissions of the same change. - Various minor fixes and improvements" * tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (38 commits) hwmon: Remove amd_energy driver hwmon: Clarify scope of attribute access hwmon: (pmbus) Introduce PMBUS symbol namespace hwmon: (pmbus) Add pmbus driver for MAX15301 hwmon: (sch5627) Remove unnecessary error path hwmon: (sch5627) Use devres function hwmon: (pmbus/pxe1610) don't bail out when not all pages are active hwmon: Add driver for fsp-3y PSUs and PDUs hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 card hwmon: (sch5627) Split sch5627_update_device() hwmon: (sch5627) Convert to hwmon_device_register_with_info() hwmon: (nct6683) remove useless function hwmon: (dell-smm) Add Dell Latitude E7440 to fan control whitelist MAINTAINERS: Add keyword pattern for hwmon registration functions hwmon: (mlxreg-fan) Add support for fan drawers capability and present registers hwmon: (pmbus/tps53679) Add support for TI TPS53676 dt-bindings: Add trivial device entry for TPS53676 hwmon: (ftsteutates) Rudimentary typo fixes hwmon: (pmbus) Add driver for BluTek BPA-RS600 dt-bindings: Add vendor prefix and trivial device for BluTek BPA-RS600 ...
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-26Merge tag 'platform-drivers-x86-v5.13-1' of ↵Linus Torvalds1-37/+75
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates freom Hans de Goede: - lots of Microsoft Surface work - platform-profile support for HP and Microsoft Surface devices - new WMI Gigabyte motherboard temperature monitoring driver - Intel PMC improvements for Tiger Lake and Alder Lake - misc bugfixes, improvements and quirk additions all over * tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits) platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-P platform/x86: intel_pmc_core: Uninitialized data in pmc_core_lpm_latch_mode_write() platform/x86: intel_pmc_core: add ACPI dependency platform/surface: aggregator: fix a bit test platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" smatch warning platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake platform/x86: intel_pmc_core: Add option to set/clear LPM mode platform/x86: intel_pmc_core: Add requirements file to debugfs platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake platform/x86: intel_pmc_core: Show LPM residency in microseconds platform/x86: intel_pmc_core: Handle sub-states generically platform/x86: intel_pmc_core: Remove global struct pmc_dev platform/x86: intel_pmc_core: Don't use global pmcdev in quirks platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only threaded handler platform/x86: gigabyte-wmi: add X570 AORUS ELITE platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensors platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table platform/x86: add Gigabyte WMI temperature driver ...
2021-04-20hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 cardMatthew Gerlach1-0/+10
Like the Intel N3000 card, the Intel D5005 has a MAX10 based BMC. This commit adds support for the D5005 sensors that are monitored by the MAX10 BMC. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210413225835.459662-3-matthew.gerlach@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-14Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"Timon Baetz1-2/+2
This reverts commit 9c03008da125c1007919a9186628af3cc105f526. commit 41a8a027f4d3 ("regulator: dt-bindings: Document charger-supply for max8997") introduced a binding which uses a property of the max8997 pmic node to configure charger supply, making subnodes for MFD cells obsolete. Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Convert I²C to use software nodesAndy Shevchenko1-15/+26
The driver can provide a software node group instead of passing legacy platform data. This will allow to drop the legacy platform data structures along with unifying a child device driver to use same interface for all property providers, i.e. Device Tree, ACPI, and board files. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"Andy Shevchenko1-26/+6
The IRQ support for SCH GPIO is not specific to the Intel Quark SoC. Moreover the IRQ routing is quite interesting there, so while it's needs a special support, the driver haven't it anyway yet. Due to above remove basically redundant code of IRQ support. This reverts commit ec689a8a8155ce8b966bd5d7737a3916f5e48be3. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: arizona: Fix rumtime PM imbalance on errorDinghao Liu1-1/+1
pm_runtime_get_sync() will increase the rumtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: core: Use acpi_find_child_device() for child devices lookupAndy Shevchenko1-17/+5
Use acpi_find_child_device() for child devices lookup in mfd_acpi_add_device() instead of open coded approach. No functional change intended. While at it, amend a note comment, since usage of _ADR is found on other platforms and tables than Intel Galileo Gen 2, in particular USB wired devices are using it, according to Microsoft specifications for embedded platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Don't play dirty trick with constAndy Shevchenko1-14/+12
As Linus rightfully noticed, the driver plays dirty trick with const, i.e. it assigns a place holder data structure to the const field in the MFD cell and then drops the const by explicit casting. This is not how it should be. Assign local pointers of the cell and resource to the respective non-const place holders in the intel_quark_i2c_setup() and intel_quark_gpio_setup(). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Enable MSI interruptAndy Shevchenko1-6/+16
Allow interrupts to be MSI if supported by hardware. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexingAndy Shevchenko1-11/+11
It's convenient and less error prone to use definitions to address different cells in an array. For this purpose we may reuse existing BAR definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: ntxec: Support for EC in Tolino Shine 2 HDAndreas Kemnade1-3/+53
Add the version of the EC in the Tolino Shine 2 HD to the supported versions. It seems not to have an RTC and does not ack data written to it. The vendor kernel happily ignores write errors, using I2C via userspace i2c-set also shows the error. So add a quirk to ignore that error. PWM can be successfully configured despite of that error. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: stm32-timers: Avoid clearing auto reload registerFabrice Gasnier1-1/+6
The ARR register is cleared unconditionally upon probing, after the maximum value has been read. This initial condition is rather not intuitive, when considering the counter child driver. It rather expects the maximum value by default: - The counter interface shows a zero value by default for 'ceiling' attribute. - Enabling the counter without any prior configuration makes it doesn't count. The reset value of ARR register is the maximum. So Choice here is to backup it, and restore it then, instead of clearing its value. It also fixes the initial condition seen by the counter driver. Fixes: d0f949e220fd ("mfd: Add STM32 Timers driver") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitionsAndy Shevchenko1-4/+5
I²C header provides a descriptive definitions for standard bus speeds. Use them instead of plain numbers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Remove unused struct device memberAndy Shevchenko1-2/+0
The device pointer in the custom structure is not used anywhere, remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel_quark_i2c_gpio: Unregister resources in reversed orderAndy Shevchenko1-1/+1
In ->remove() unregister resources in reversed order, i.e. MFD devices first followed by I²C clock. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500Geert Uytterhoeven1-1/+2
The ST-Ericsson ABX500 Mixed Signal IC family chips are only present on ST-Ericsson U8500 Series platforms. Hence add a dependency on ARCH_U8500, to prevent asking the user about this driver when configuring a kernel without U8500 support. Also, merely enabling CONFIG_COMPILE_TEST should not enable additional code, and thus should not enable this driver by default. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: rn5t618: Do not cache various USB related registersAndreas Kemnade1-0/+3
These register get reset to their OTP defaults after USB plugging. And while at it, also add a missing register for detecting the charger type. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Make symbol 'atc260x_i2c_of_match' staticWei Yongjun1-1/+1
The sparse tool complains as follows: drivers/mfd/atc260x-i2c.c:45:27: warning: symbol 'atc260x_i2c_of_match' was not declared. Should it be static? This symbol is not used outside of atc260x-i2c.c, so this commit marks it static. Fixes: f7cb7fe34db9 ("mfd: Add MFD driver for ATC260x PMICs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: core: Remove support for dangling device propertiesHeikki Krogerus1-6/+0
From now on only accepting complete software nodes. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel-lpss: Switch to use the software nodesHeikki Krogerus4-15/+51
Software node was always created for the device if it was supplied with additional device properties, so those nodes might as well be constant. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel-lpss: Constify device property structuresAndy Shevchenko3-10/+10
There is no point to have non-constant device properties in this driver. Thus, constify them for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: core: Add support for software nodesHeikki Krogerus1-0/+9
The old device property API is going to be removed and replaced with the newer software node API. This prepares MFD subsystem for the transition. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: da9063: Support SMBus and I2C modeHubert Streidl1-0/+10
By default the PMIC DA9063 2-wire interface is SMBus compliant. This means the PMIC will automatically reset the interface when the clock signal ceases for more than the SMBus timeout of 35 ms. If the I2C driver / device is not capable of creating atomic I2C transactions, a context change can cause a ceasing of the clock signal. This can happen if for example a real-time thread is scheduled. Then the DA9063 in SMBus mode will reset the 2-wire interface. Subsequently a write message could end up in the wrong register. This could cause unpredictable system behavior. The DA9063 PMIC also supports an I2C compliant mode for the 2-wire interface. This mode does not reset the interface when the clock signal ceases. Thus the problem depicted above does not occur. This patch tests for the bus functionality "I2C_FUNC_I2C". It can reasonably be assumed that the bus cannot obey SMBus timings if this functionality is set. SMBus commands most probably are emulated in this case which is prone to the latency issue described above. This patch enables the I2C bus mode if I2C_FUNC_I2C is set or otherwise keeps the default SMBus mode. Signed-off-by: Hubert Streidl <hubert.streidl@de.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: sec: Initialize driver via module_platform_driver()Krzysztof Kozlowski1-13/+1
The driver was using subsys_initcall() because in old times deferred probe was not supported everywhere and specific ordering was needed. Since probe deferral works fine and specific ordering is discouraged (hides dependencies between drivers and couples their boot order), the driver can be converted to regular module_platform_driver. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel-m10-bmc: Add access table configuration to the regmapMatthew Gerlach1-0/+13
This patch adds access tables to the MAX 10 BMC regmap. This prevents the host from accessing the unwanted I/O space. It also filters out the invalid outputs when reading the regmap debugfs interface. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel-m10-bmc: Simplify the legacy version reg definitionXu Yilun1-10/+7
The version register is the only one in the legacy I/O space to be accessed, so it is not necessary to define the legacy base & version register offset. A direct definition of the legacy version register address would be fine. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: lm3533: Switch to using the new API kobj_to_dev()Yang Li1-1/+1
Fixes the following coccicheck warning: drivers/mfd/lm3533-core.c:361:60-61: WARNING opportunity for kobj_to_dev() Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: ene-kb3930: Make local symbol 'kb3930_power_off' staticWei Yongjun1-1/+1
The sparse tool complains as follows: drivers/mfd/ene-kb3930.c:36:15: warning: symbol 'kb3930_power_off' was not declared. Should it be static? The symbol is not used outside of this file. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Remove support for AB3100Arnd Bergmann4-1196/+1
The ST-Ericsson U300 platform has been removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: ab8500: Drop bm disable parameterLinus Walleij1-14/+6
Nobody is passing the module parameter to disable the battery management portions so just drop this parameter. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: stmpe: Revert "Constify static struct resource"Rikard Falkeborn1-5/+9
In stmpe_devices_init(), the start and end field of these structs are modified, so they can not be const. Add a comment to those structs that lacked it to reduce the risk that this happens again. This reverts commit 8d7b3a6dac4eae22c58b0853696cbd256966741b. Fixes: 8d7b3a6dac4e ("mfd: stmpe: Constify static struct resource") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: arizona: Make some symbols staticWei Yongjun1-2/+2
The sparse tool complains as follows: drivers/mfd/arizona-spi.c:28:31: warning: symbol 'reset_gpios' was not declared. Should it be static? drivers/mfd/arizona-spi.c:29:31: warning: symbol 'ldoena_gpios' was not declared. Should it be static? Those symbols are not used outside of arizona-spi.c, so this commit marks them static. Fixes: e933836744a2 ("mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14Merge tag 'ib-mfd-watchdog-v5.13' into ibs-for-mfd-mergedLee Jones3-0/+201
Immutable branch between MFD and Watchdog due for the v5.13 merge window
2021-04-14Merge tags 'ib-mfd-clk-gpio-regulator-rtc-v5.13', 'ib-mfd-extcon-v5.13', ↵Lee Jones8-66/+711
'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ramp-helpers-v5.13' into ibs-for-mfd-merged Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window Immutable branch between MFD and Extcon due for the v5.13 merge window Immutable branch between MFD and Input due for the v5.13 merge window Immutable branch between MFD and Platform/x86 due for the v5.13 merge window Immutable branch between MFD and Power due for the v5.13 merge window Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
2021-04-14mfd: Support for ROHM BD71815 PMIC coreMatti Vaittinen2-133/+368
Add core support for ROHM BD71815 Power Management IC. The IC integrates regulators, a battery charger with a coulomb counter, a real-time clock (RTC), clock gate and general-purpose outputs (GPO). Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: bd718x7: simplify by cleaning unnecessary device dataMatti Vaittinen1-27/+16
Most ROHM PMIC sub-devices only use the regmap pointer from parent device. They can obtain this by dev_get_regamap so in most cases the MFD device does not need to allocate and populate the driver data. Simplify drivers by removing this. The BD70528 still needs the access to watchdog mutex so keep rohm_regmap_dev in use on BD70528 RTC and WDG drivers for now. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-23mfd: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10Krzysztof Kozlowski1-2/+2
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. The side effect is that the MFD_ALTERA_A10SR will now be available for both 32-bit and 64-bit Intel SoCFPGA, even though it is used only for 32-bit. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources"Andy Shevchenko1-2/+4
The structures are used as place holders, so they are modified at run-time. Obviously they may not be constants. BUG: unable to handle page fault for address: d0643220 ... CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1 Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014 EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio] This partially reverts the commit c4a164f41554d2899bed94bdcc499263f41787b4. While at it, add a comment to avoid similar changes in the future. Fixes: c4a164f41554 ("mfd: Constify static struct resources") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Tested-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-22mfd/power: ab8500: Push data to power supply codeLinus Walleij1-9/+8
The global definition of platform data for the battery management code has no utility after the OF conversion, move the <linux/mfd/abx500/ab8500-bm.h> to be a local file in drivers/power/supply and stop defining the platform data in drivers/power/supply/ab8500_bmdata.c and broadcast to the kernel only to have it assigned as platform data to the MFD cells and then picked back into the same subsystem that defined it in the first place. This kills off a layer of indirection. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-18mfd: arizona: Drop arizona-extcon cellsHans de Goede1-20/+0
The arizona jack-dection handling is being reworked so that the codec-child-device drivers directly handle jack-detect themselves, so it is no longer necessary to instantiate "arizona-extcon" child-devices. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-10mfd: Add MFD driver for ATC260x PMICsCristian Ciocaltea4-0/+395
Add initial support for the Actions Semi ATC260x PMICs which integrates Audio Codec, Power management, Clock generation and GPIO controller blocks. For the moment this driver only supports Regulator, Poweroff and Onkey functionalities for the ATC2603C and ATC2609A chip variants. Since the PMICs can be accessed using both I2C and SPI buses, the following driver structure has been adopted: -----> atc260x-core.c (Implements core functionalities) / ATC260x --------> atc260x-i2c.c (Implements I2C interface) \ -----> atc260x-spi.c (Implements SPI interface - TODO) Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-10mfd: Add base driver for Netronix embedded controllerJonathan Neuschäfer3-0/+233
The Netronix embedded controller is a microcontroller found in some e-book readers designed by the original design manufacturer Netronix, Inc. It contains RTC, battery monitoring, system power management, and PWM functionality. This driver implements register access and version detection. Third-party hardware documentation is available at: https://github.com/neuschaefer/linux/wiki/Netronix-MSP430-embedded-controller The EC supports interrupts, but the driver doesn't make use of them so far. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-10mfd: bd9576: Add IRQ supportMatti Vaittinen1-5/+85
BD9573 and BD9576 support set of "protection" interrupts for "fatal" issues. Those lead to SOC reset as PMIC shuts the power outputs. Thus there is no relevant IRQ handling for them. Few "detection" interrupts were added to the BD9576 with the idea that SOC could take some recovery-action before error gets unrecoverable. Unfortunately the BD9576 interrupt logic was not re-evaluated. IRQs are not designed to be properly acknowleged - and IRQ line is kept active for whole duration of error condition (in comparison to informing only about state change). For above reason, do not consider missing IRQ as error. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-10mfd: Support ROHM BD9576MUF and BD9573MUFMatti Vaittinen3-0/+121
Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are mainly used to power the R-Car series processors. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-10mfd: intel_pmt: Add support for DG1David E. Box1-29/+72
Adds PMT Telemetry aggregator support for the DG1 graphics PCIe card. The device does not have the DVSEC region in its PCI config space so hard code the discovery table data in the driver. Also requires a fix for DG1 in the Telemetry driver for how the ACCESS_TYPE field is used. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-10mfd: intel_pmt: Fix nuisance messages and handling of disabled capabilitiesDavid E. Box1-8/+3
Some products will be available that have PMT capabilities that are not supported. Remove the warnings in this instance to avoid nuisance messages and confusion. Also return an error code for capabilities that are disabled by quirk to prevent them from keeping the driver loaded if only disabled capabilities are found. Fixes: 4f8217d5b0ca ("mfd: Intel Platform Monitoring Technology support") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>