summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds2-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits) sh: i2c-sh7760: Replase from ctrl_* to __raw_* sh: clkfwk: Shuffle around to match the intc split up. sh: clkfwk: modify for_each_frequency end condition sh: fix clk_get() error handling sh: clkfwk: Fix fault in frequency iterator. sh: clkfwk: Add a helper for rate rounding by divisor ranges. sh: clkfwk: Abstract rate rounding helper. sh: clkfwk: support clock remapping. sh: pci: Convert to upper/lower_32_bits() helpers. sh: mach-sdk7786: Add support for the FPGA SRAM. sh: Provide a generic SRAM pool for tiny memories. sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786. sh: pci: Support slot 4 routing on SDK7786. sh: Fix up PMB locking. sh: mach-sdk7786: Add support for fpga gpios. sh: use pr_fmt for clock framework, too. sh: remove name and id from struct clk sh: free-without-alloc fix for sh_mobile_lcdcfb sh: perf: Set up perf_max_events. sh: perf: Support SH-X3 hardware counters. ... Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c
2010-10-25Merge branch 'topic/asoc' into for-linusTakashi Iwai2-7/+7
Conflicts: arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-0/+1
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-21Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-0/+5
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (53 commits) spi/omap2_mcspi: Verify TX reg is empty after TX only xfer with DMA spi/omap2_mcspi: disable channel after TX_ONLY transfer in PIO mode spi/bfin_spi: namespace local structs spi/bfin_spi: init early spi/bfin_spi: check per-transfer bits_per_word spi/bfin_spi: warn when CS is driven by hardware (CPHA=0) spi/bfin_spi: cs should be always low when a new transfer begins spi/bfin_spi: fix typo in comment spi/bfin_spi: reject unsupported SPI modes spi/bfin_spi: use dma_disable_irq_nosync() in irq handler spi/bfin_spi: combine duplicate SPI_CTL read/write logic spi/bfin_spi: reset ctl_reg bits when setup is run again on a device spi/bfin_spi: push all size checks into the transfer function spi/bfin_spi: use nosync when disabling the IRQ from the IRQ handler spi/bfin_spi: sync hardware state before reprogramming everything spi/bfin_spi: save/restore state when suspending/resuming spi/bfin_spi: redo GPIO CS handling Blackfin: SPI: expand SPI bitmasks spi/bfin_spi: use the SPI namespaced bit names spi/bfin_spi: drop extra memory we don't need ...
2010-10-20Merge branch 'linus' into irq/coreIngo Molnar2-8/+14
Merge reason: update to almost-final-.36 Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-12Merge commit 'v2.6.36-rc7' into spi/nextGrant Likely2-8/+14
2010-10-12spi/pl022: Add spi->mode support to AMBA SPI driverKevin Wells1-0/+5
This patch adds spi->mode support for the AMBA pl022 driver and allows spidev to correctly alter SPI modes. Unused fields used in the pl022 header file for the pl022_config_chip have been removed. The ab8500 client driver selects the data transfer size instead of the platform data. For platforms that use the amba pl022 driver, the unused fields in the controller data structure have been removed and the .mode field in the SPI board info structure is used instead. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-08mfd: twl4030: Fix dummy irq chip usageThomas Gleixner1-1/+1
The twl irqchip uses the dummy irq chip ack functions, which is NULL now. Switch it over to use irq_ack. Reported-and-tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-04mfd: Rename struct irq_data to struct sih_irq_dataThomas Gleixner1-1/+1
struct irq_data is the preferred name for the data associated to an interrupt in the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-29mfd: Fix max8925 irq control bit incorrect settingKevin Liu1-6/+7
In max8925_irq_sync_unlock(), irq control bit is set at the same time. Zero means enabling irq, and one means disabling irq. The original code is: irq_chg[0] &= irq_data->enable; It should be changed to: irq_chg[0] &= ~irq_data->enable; Otherwise, irq control bit is mess. Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-29mfd: Ignore non-GPIO IRQs when setting wm831x IRQ typesMark Brown1-2/+7
The driver was originally tested with an additional patch which made this unneeded but that patch had issuges and got lost on the way to mainline, causing problems when the errors are reported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Cc: stable@kernel.org
2010-09-16mfd: Fix up section mismatches in SH SDHI.Paul Mundt1-1/+1
The current probe/remove definitions are split between __init and __devexit, make them consistent by switching to __devinit. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-05Input: add support for PowerOn button on the AB8500 MFDSundar R Iyer1-0/+20
Add the PowerOn (PonKey) button support to detect power on/off events. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-16Merge branch 'for-2.6.36' into for-2.6.37Mark Brown38-137/+2562
Fairly simple conflicts, the most serious ones are the i.MX ones which I suspect now need another rename. Conflicts: arch/arm/mach-mx2/clock_imx27.c arch/arm/mach-mx2/devices.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-zoom2.c sound/soc/fsl/mpc5200_dma.c sound/soc/fsl/mpc5200_dma.h sound/soc/fsl/mpc8610_hpcd.c sound/soc/pxa/spitz.c
2010-08-12Merge branch 'for-linus' of ↵Linus Torvalds4-1/+172
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (22 commits) regulator: Remove default DEBUG define from TPS6586x regulator: tps6507x - add missing platform_set_drvdata in tps6507x_pmic_probe regulator: tps6586x - add regulator_unregister() in tps6586x_regulator_remove() mfd: max8998 - fix incorrect kfree(i2c) in i2c_driver probe callback handler regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write() regulator: max8660 - fix a memory leak in max8660_remove() regulator: max1586 - fix a memory leak in max1586_pmic_remove() regulator: Default GPIO controlled WM8994 regulators to disabled regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write() max8998: fix off-by-one value range checking regulator: tps6586x: fix millivolt return values and SM2 table regulator: tps6586x: add dependancy on MFD_TPS6585x regulator: add TPS6586X regulator driver regulator: MAX8998: set_voltage bugfix. ramp_up delay and min/max voltage regulator: add support for regulators on the ab8500 MFD ab8500-mfd: add regulator support to ab8500 mfd device tps65023: Allow registering similar TPS65021 drivers: regulators: depend on MFD_MAX8998 drivers: regulator: add Maxim 8998 driver ISL6271A voltage regulator support. ...
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood2-7/+7
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12mfd: Fix incorrect kfree(i2c) in wm8994-core i2c_driver probeAxel Lin1-3/+1
The i2c_client received in probe() should not be kfree()'d. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix incorrect kfree(i2c) in wm831x-core i2c_driver probeAxel Lin1-3/+1
The i2c_client received in probe() should not be kfree()'d. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix incorrect kfree(i2c) in tps6507x i2c_driver probeAxel Lin1-3/+1
The i2c_client received in probe() should not be kfree()'d. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add TPS6586x driverMike Rapoport3-0/+390
Add mfd core driver for TPS6586x PMICs family. The driver provides I/O access for the sub-device drivers and performs regstration of the sub-devices based on the platform requirements. In addition it implements GPIOlib interface for the chip GPIOs. TODO: - add interrupt support - add platform data for PWM, backlight leds and charger Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Use macros instead of some constant magic numbers for menelausJarkko Nikula1-21/+54
This patch is originally done by Carlos Eduardo Aguiar. Original fix is commit 3305829b2816072b9c8ed01374b205ae4de74027 in git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git Author modified the fix for mainline version of menelaus. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix menelaus mmc slot 2 misconfigurationJarkko Nikula1-2/+2
We are modifying register value instead of return value. This fix is originally done by Carlos Eduardo Aguiar. Original fix is commit bb4e91722e29efe31587d2cc664b6def645aecd9 in git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git Author modified the fix for mainline version of menelaus. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Missing slab.h includesDavid Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix wrong wm8350-core kfree in error pathAxel Lin1-2/+4
This patch includes below fixes: 1. fix wm8350_create_cache error path make sure wm8350->reg_cache is freed in error path. 2. fix wm8350_device_init error path no need to kfree(wm8350->reg_cache) in the case of goto out. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix wm8994_device_init() return valueAxel Lin1-1/+3
wm8994_device_init() will return 0 in the case of kzalloc fail in current implementation. This patch fixes the return value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Avoid calling platform_device_put() twice in ucb1400 probe error pathAxel Lin1-1/+1
In the case of goto err2, what we want is to call platform_device_del() instead of platform_device_unregister(). Otherwise, we call platform_device_put() twice. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Annotate tc6387xb probe/remove routines with __devinit/__devexitAxel Lin1-3/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix tc6387xb resource reclaimAxel Lin1-3/+7
This patch includes below fixes: 1. add a missing iounmap in tc6387xb_probe() error path 2. fix resource reclaim in tc6387xb_remove() Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix wrong goto labels for tc6393xb error handlingAxel Lin1-2/+2
This patch corrects the error handling path. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Get rid of now unused mc13783 private headerUwe Kleine-König1-1/+23
This adds all remaining definitions that are used by the core driver to the .c file. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: New mc13783 function exposing flagsUwe Kleine-König1-0/+6
This is needed for the mc13783-adc driver to decide if a touch screen is connected. If so some channels are not available as generic hwmon inputs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Check jz4740-adc kmalloc() resultAxel Lin1-0/+4
If kmalloc() fails exit with -ENOMEM. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix jz4740-adc resource reclaim in probe error pathAxel Lin1-1/+7
If mfd_add_devices() fail, we need to relese allocated resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add WM8321 supportMark Brown1-0/+14
The WM8321 is a PMIC for low power, high performance applications. From a software point of view the device is identical to the WM8320, all the differences between the two devices are visible only in hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add stmpe auto sleep featureSundar R Iyer2-0/+77
Some STMPE devices support entering sleep mode automatically on a specified timeout of inactivity on the I2C bus with the host system. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add support for TWL6030 PWMHemanth V3-0/+173
TWL6030 supports PWM (Pulse Width Modulator) which is used to control charging LED. PWM allows for controlling brightness. This patch implements the APIs required by leds-pwm driver. Signed-off-by: Hemanth V <hemanthv@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add JZ4740 ADC driverLars-Peter Clausen3-0/+393
This patch adds a MFD driver for the JZ4740 ADC unit. The driver is used to demultiplex IRQs and synchronize access to shared registers between the battery, hwmon and (future) touchscreen driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add STMPE I/O Expander supportRabin Vincent4-0/+1115
Add support for the STMPE family of I/O Expanders from STMicroelectronics. These devices include upto 24 gpios and a varying selection of blocks, including PWM, keypad, and touchscreen controllers. This patch adds the MFD core. [l.fu@pengutronix.de: fix stmpe811 enable hook] [l.fu@pengutronix.de: add touchscreen platform data] Acked-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Properly free t7l66xb clk32k clock sourceAxel Lin1-1/+2
This patch includes below fixes to properly free clk32k clock source: 1. remove a redundant clk_put in t7l66xb_probe error path 2. add missing clk_disable(t7l66xb->clk32k) and clk_put(t7l66xb->clk32k) to properly free the clock source. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: More verbose MFD Kconfig entrySamuel Ortiz1-1/+10
For people to be able to intellingibly decide if they want to enable MFD drivers or not, we have to give them a much better description of what they are.
2010-08-12mfd: Staticise ab3550 register access functionsMark Brown1-11/+12
These are now exported via an ops table rather than referenced directly and so should be staticised. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix davinci memory leakJulia Lawall1-2/+4
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: properly handle platform_device_add_resources fail in mfd_add_deviceAxel Lin1-1/+3
platform_device_add_resources may fail, thus add error checking for it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: kzalloc doesn't return ERR_PTRJulia Lawall1-1/+1
Use !x rather than IS_ERR(x) to test the result of kzalloc. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,E; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...) ... when != x = E - IS_ERR(x) + !x // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: AB8500 mask off irrelevant bits from the SPI messageLinus Walleij1-1/+6
The registers on the AB8500 are only 8 bits wide, so the content of the remaining bits is undefined. Let's mask off the undefined stuff when returning a register in an SPI read. Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix 88pm860x uninitialized variable and clean upDan Carpenter1-40/+32
The original code had a compile warning: drivers/mfd/88pm860x-core.c:431: warning: ‘ret’ may be used uninitialized in this function It seems like the warning is valid if either pdata or pdata->touch is NULL. This patch checks pdata and pdata->touch at the beginning of the function. That means everything can be pulled in one indent level. Now all the statements fit within the 80 character limit. Also at that point the "use_gpadc" variable isn't needed and removing it simplifies the logic. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Haojian Zhuang <hzhuang1@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Fix memory leak in ab3100_otp_probeAxel Lin1-8/+8
In current implementation, there is a memory leak if ab3100_otp_read fail. And in the case of ab3100_otp_init_debugfs fail, it does not properly remove sysfs entries. This patch properly handle above failure cases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 00:59:34 +0000