summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/wm5110-tables.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-03mfd: wm5110: Add missing ASRC rate registerCharles Keepax1-0/+2
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: wm5110: ARIZONA_CLOCK_CONTROL should be volatileRichard Fitzgerald1-0/+1
Some of the bits in this register can be changed by the codec so we must mark it volatile. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: wm5110: Fix defaults array based on testingCharles Keepax1-45/+37
My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11mfd: wm5110: Correct defaults for micbias control registersCharles Keepax1-3/+3
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: arizona: Add register bits to support the ANC blockCharles Keepax1-0/+186
Some Arizona devices have a hardware ANC block present. This patch adds the registers necessary to configure this hardware block. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: Fixup clients of multi_reg_write/register_patchNariman Poushin1-1/+1
Introduced by: commit 8019ff6cfc04 ("regmap: Use reg_sequence for multi_reg_write / register_patch") Interacting with: commit 561629755a21 ("mfd: arizona: Add support for WM8998 and WM1814") commit 81207880cef2 ("mfd: wm5110: Add register patch for rev E and above") Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-09-22mfd: arizona: Add TST_CAP bits for headphone detectionCharles Keepax1-0/+2
On wm5110/8280 some additional settings are required to get accurate measurements at the top end of the headphone detection range. This patch adds the bits required for this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22mfd: arizona: Add register bits for general purpose switchCharles Keepax1-0/+2
The switch is typically used in conjunction with the MICDET clamp in order to suppress pops and clicks associated with jack insertion. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22mfd: arizona: Add registers for ADC microphone detectionCharles Keepax1-0/+2
The newer devices support using a software comparison to determine whether a 3/4 pole jack is present. Add the registers necessary for this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-04Merge tag 'sound-4.3-rc1' of ↵Linus Torvalds1-4/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There are little changes in core part, but lots of development are found in drivers, especially ASoC. The diffstat shows regmap-related changes for a slight API additions / changes, and that's all. Looking at the code size statistics, the most significant addition is for Intel Skylake. (Note that SKL support is still underway, the codec driver is missing.) Also STI controller driver is a major addition as well as a few new codec drivers. In HD-audio side, there are fewer changes than the past. The noticeable change is the support of ELD notification from i915 graphics driver. Thus this pull request carries a few changes in drm/i915. Other than that, USB-audio got a rewrite of runtime PM code. It was initiated by lockdep warning, but resulted in a good cleanup in the end. Below are the highlights: Common: - Factoring out of AC'97 reset code from ASoC into the core helper - A few regmap API extensions (in case it's not pulled yet) ASoC: - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek RT298 and ST STI controllers - Machine drivers for Rockchip systems with MAX98090 and RT5645 and RT5650 - Initial driver support for Intel Skylake devices - Lots of rsnd cleanup and enhancements - A few DAPM fixes and cleanups - A large number of cleanups in various drivers (conversion and standardized to regmap, component) mostly by Lars-Peter and Axel HD-audio: - Extended HD-audio core for Intel Skylake controller support - Quirks for Dell headsets, Alienware 15 - Clean up of pin-based quirk tables for Realtek codecs - ELD notifier implenetation for Intel HDMI/DP USB-audio: - Refactor runtime PM code to make lockdep happier" * tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits) drm/i915: Add locks around audio component bind/unbind drm/i915: Drop port_mst_index parameter from pin/eld callback ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup() ALSA: hda - Wake the codec up on pin/ELD notify events ALSA: hda - allow codecs to access the i915 pin/ELD callback drm/i915: Call audio pin/ELD notify function drm/i915: Add audio pin sense / ELD callback ASoC: zx296702-i2s: Fix resource leak when unload module ASoC: sti_uniperif: Ensure component is unregistered when unload module ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure ASoC: Clean up docbook warnings ASoC: txx9: Convert to devm_snd_soc_register_platform ASoC: pxa: Convert to devm_snd_soc_register_platform ASoC: nuc900: Convert to devm_snd_soc_register_platform ASoC: blackfin: Convert to devm_snd_soc_register_platform ASoC: au1x: Convert to devm_snd_soc_register_platform ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops ...
2015-08-11mfd: arizona: Specify regmap endiannessRichard Fitzgerald1-0/+4
Explicitly set the regmap endianness instead of relying on the default being correct. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11mfd: arizona: Fixup register table definitionsCharles Keepax1-10/+0
The regmap register definitions have been a source of many small fixes as issues are discovered. As such I made a small automated tool to check these definitions. This patch fixes the issues (mostly harmless) located by that tool, the issues fall into three catagories: 1) Volatile registers that have a default in the defaults table (default has been removed from the table since it is redundant) 2) Registers that are marked as volatile but unreadable (register has been removed from the volatile list since it is obviously not being used) 3) Registers that arn't readable but have an entry in the defaults table (again removed since it is redundant) 4) Readable non-volatile registers that are missing a default, these are dangerous as they won't get synced during a cache sync. Fortunately, most of them seem to be registers that shouldn't be there (for example wm5102 had readable registers for DRC2 and ISRC3 which is doesn't have) Hopefully another tool will be produced to check the actual default values themselves but that is outside the scope of this patch. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-17Merge tag 'regmap-seq-delay-api' of ↵Mark Brown1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-wm5110 regmap: Create a new struct reg_sequence for register sequences In order to allow us to start adding extra annotations for sequences without bloating register default tables duplicate the structure under the new name reg_sequence and update the APIs to use that instead of reg_default.
2015-07-16regmap: Use reg_sequence for multi_reg_write / register_patchNariman Poushin1-3/+3
Separate the functionality using sequences of register writes from the functions that take register defaults. This change renames the arguments in order to support the extension of reg_sequence to take an optional delay to be applied after any given register in a sequence is written. This avoids adding an int to all register defaults, which could substantially increase memory usage for regmaps with large default tables. This also updates all the clients of multi_reg_write/register_patch. Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-08mfd: wm5110: Add register patch for rev E and aboveCharles Keepax1-1/+13
Add a register patch for rev E and above that configures the location of some write sequences to assist with the headphone enables. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-08mfd: wm5110: Add registers for custom write sequence triggersCharles Keepax1-0/+2
This register will be needed as part of some additional support for the headphone path on wm5110, so this patch adds the register and sets up its regmap config. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25mfd: wm5110: Add missing registers for AIF2 channels 3-6Charles Keepax1-0/+16
When the extra 4 channels were added to AIF2 the necessary frame control registers were not given defaults and marked readable. This patch fixes this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-11-25mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registersCharles Keepax1-0/+4
These registers are documented in the datasheet and used as part of the extcon driver. Expose them properly through regmap as the datasheet notes they should be treated as volatile do so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-09-26mfd: arizona: Add ASYNC_SAMPLE_RATE_2 registersCharles Keepax1-0/+4
Some arizona devices have a second asynchronous sample rate, add the registers necessary to support this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: arizona: Mark additional registers as volatileCharles Keepax1-3/+3
Mark some additional registers as volatile. The write sequencer control registers should not be cached, as we don't ever want their value synchronised as this might cause a write sequence to be accidentally initiated. Additionally, the DAC_COMP registers require special preconditions to write so there values wouldn't be updated accurately during a register sync. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: wm5110: Add new interrupt register definitionsCharles Keepax1-0/+213
Newer versions of the IP have a lot of new interrupts and move several existing interrupts. This patch adds the register definitions and regmap hookup for these interrupts. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: arizona: Rename thermal shutdown interruptCharles Keepax1-4/+4
Newer versions of the IP introduce short circuit protection which will also shutdown the speaker. Rename the interrupt and associated register bits associated with thermal events to better fit the function and avoid conflict with future interrupt additions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: wm5110: Add in the output done interruptsCharles Keepax1-0/+18
wm5110 has interrupts to signal that an output has fully enabled. This patch adds in these interrupts although use is not made of them yet. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: wm5110: Remove non-existant interruptsCharles Keepax1-6/+0
The DCS_DAC_DONE and DCS_HP_DONE interrupts do not exist on the wm5110 version of the IP. This patch removes them from the regmap IRQ structure. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: arizona: Correct addresses of always-on trigger registersRichard Fitzgerald1-4/+8
Update the addresses and names to match current silicon. The WM8997 regmap tables have been adjusted to match the new names. Missing registers have been added to WM5110 default value table. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: wm5110: Add missing isolation control registerCharles Keepax1-0/+2
The isolation control register is required when DCVDD is externally supplied add this in as a readable register. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-31mfd: wm5110: Correct default for HEADPHONE_DETECT_1Charles Keepax1-1/+1
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-31mfd: arizona: Mark DSP clocking register as volatileCharles Keepax1-0/+4
The DSPs will often control there own clock speeds whilst running as such we should mark the registers controlling this as volatile. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: wm5110: Make additional DSP registers available to the userCharles Keepax1-0/+168
Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfdLinus Torvalds1-2/+30
Pull MFD changes from Lee Jones: "New drivers - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator Existing driver adaptions - Expansion of Wolfson Arizona DSP and High-Pass filter controls - TI TWL6040 default Regmap support and Regcache addition/bypass - Some nice Smatch catch fixes - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness - ChromeOS EC timing (delay) adaptions and added dependency on OF - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}' - Watchdog support added for NVIDIA AS3722 - Convert functions to static in TI AM335x - Realigned previously defeated functionality in TI AM335x - IIO ADC-TSC concurrency dead-lock/timeout resolution - Addition of Power Management and Clock support for Samsung core - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem - Greater use of irqdomain functionality in ST-E AB8500 - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h' - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/ - Device Tree documentation added for TI/Nat Semi LP3943 - Version detection and voltage tables for TI TPS6586x PMIC devices - Simplification of Freescale MC13XXX (de-)initialisation routines - Clean-up and simplification of the Realtek parent driver - Added support for RTL8402 Realtek PCI-Express card reader - Resource leak fix for Maxim 77686 - Possible suspend BUG() fix in OMAP USB TLL - Support for new Wolfson WM5110 Revision (D) - Testing of automatic assignment of of_node in mfd_add_device() - Reversion of the above when it started to cause issues - Remove legacy Platform Data from; TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal, unused uninitialised warning mitigation, error message clarity, removal of redundant/duplicate checks, licensing (GPL -> GPL2), coding consistency, duplicate function declaration, ret checks, commit corrections, redundant of_match_ptr() helper removal, spelling, #if-deffery removal and header guards name changes" * tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits) mfd: wm5110: Add register patch for rev D chip mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() gpio: lp3943: Remove redundant of_match_ptr helper mfd: sta2x11-mfd: Use named constants for pci_power_t values Documentation: mfd: Fix LDO index in s2mps11.txt mfd: Cleanup mfd-mcp-sa11x0.h header mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code. mfd: twl6030: Fix endianness problem in IRQ handler mfd: sec-core: Add cells for S5M8767-clocks mfd: max14577: Remove redundant of_match_ptr helper mfd: twl6040: Fix sparse non static symbol warning mfd: Revert "mfd: Always assign of_node in mfd_add_device()" mfd: rtsx: Fix sparse non static symbol warning mfd: max77693: Set proper maximum register for MUIC regmap mfd: max77686: Fix regmap resource leak on driver remove mfd: Represent correct filenames in file headers mfd: rtsx: Add support for card reader rtl8402 mfd: rtsx: Add set pull control macro and simplify rtl8411 mfd: max8997: Enforce mfd_add_devices() return value check mfd: mc13xxx: Simplify probe() & remove() ...
2014-01-21mfd: wm5110: Add register patch for rev D chipCharles Keepax1-1/+29
Evaluation of revision D of WM5110 suggests updates to the register patch for optimal performance. For the sake of clarity rev C of the chip does not require a register patch. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21Merge tag 'tags/ib-asoc-1' into for-mfd-nextLee Jones1-4/+69
Immutable branch for ASoC, as requested by Mark Brown
2014-01-10mfd: wm5110: Add registers for headphone short circuit controlCharles Keepax1-0/+6
Add the registers necessary to enable/disable the headphone short circuit protection. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06mfd: wm5110: Correct default for register LDO2 Control 1Charles Keepax1-1/+1
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-19mfd: wm5110: Expose DRE control registersCharles Keepax1-0/+2
Certain use-cases require the DRE to be disabled so expose registers necessary to control the DRE enables. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-28mfd: wm5110: Give new AIF2 registers defaults and mark as readableCharles Keepax1-0/+64
The registers associated with the new channels on AIF2 were accidentally missing defaults and not marked as readable this patch fixes this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24Merge tag 'v3.13-rc1' into asoc-arizonaMark Brown1-4/+43
Linux 3.13-rc1
2013-11-21ASoC: wm5110: Expose input high pass filter controlsCharles Keepax1-0/+4
Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-11-21mfd: wm5110: Make DSP memories readableCharles Keepax1-4/+65
Expose the memory regions used by the DSP cores on WM5110 as readable and volatile. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-11-11mfd: wm5110: Enable micd clamp functionalityCharles Keepax1-0/+8
Add missing registers and interrupts required for the microphone detection clamping. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23mfd: arizona: Mark missing AOD registers as volatileCharles Keepax1-1/+2
This registers ARIZONA_AOD_WKUP_AND_TRIG and ARIZONA_AOD_IRQ_RAW_STATUS contain interrupt status bits and thus should be volatile. They are correctly marked on wm5102 but not on wm5110, this patch changes this. Furthermore volatile registers don't need defaults so remove those. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23mfd: wm5110: Update noise gate default to match the patch fileCharles Keepax1-1/+1
The default value for the noise gate control register is changed in the patch file, we need to reflect this in the defaults array, this patch does so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23mfd: arizona: Update registers for WM5110 DSPCharles Keepax1-2/+32
DSPx_CONTROL_1 and DSPx_CLOCKING_1 are not volatile registers and are incorrectly marked as such, fix this. Also add the DSP scratch registers, which are frequently used to output debug info from the DSP core. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: wm5110: Set FX_CTRL2 to volatileCharles Keepax1-0/+1
FX_CTRL2 is a volatile register and should be marked as such, this patch does so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: wm5110: Add missing Mic Detect 3 register into defaultsCharles Keepax1-0/+1
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: wm5110: Add mic detect level registersCharles Keepax1-0/+8
The mic detect level registers are used from common code to configure the button detection code. Add these registers to the defaults list and mark them as readable for wm5110. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: wm5110: Mark register containing FLL gains as readableCharles Keepax1-0/+8
The FLL gains are present on all devices and controlled from common code shared between them. This patch adds these registers into defaults list for wm5110 and marks them as readable. Reported-by: D.J. Barrow <dbarrow@wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-05-22mfd: wm5110: Make DSPn_STATUS_3 readableMark Brown1-0/+8
These registers have been documented since the driver was originally submitted so expose them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04mfd: wm5110: Mark wakes as invertedMark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 09:03:56 +0000