summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/ab8500-debugfs.c
AgeCommit message (Collapse)AuthorFilesLines
2020-07-06mfd: ab8500-debugfs: Fix incompatible types in comparison expression issueLee Jones1-1/+1
Smatch reports: drivers/mfd/ab8500-debugfs.c:1804:20: error: incompatible types in comparison expression (different type sizes): drivers/mfd/ab8500-debugfs.c:1804:20: unsigned int * drivers/mfd/ab8500-debugfs.c:1804:20: unsigned long * This is due to mixed types being compared in a min() comparison. Fix this by treating values as signed and casting them to the same type as the receiving variable. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-18mfd: Switch the AB8500 GPADC to IIOLinus Walleij1-715/+0
The AB8500 GPADC driver is indeed a "general purpose ADC" driver, and while the IIO subsystem did not exist when the driver was first merged, it is never too late to clean things up and move it to the right place. Nowadays IIO provides the right abstractions and interfaces to do generic ADC work in the kernel. We have to cut a bunch of debugfs luggage to make this transition swift, but all these files to is read out the raw values of the ADC and the IIO subsystem already has a standard sysfs ABI for doing exactly this: no debugfs is needed. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-12mfd: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-6/+2
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-12mfd: ab8500: No need to check return value of debugfs_create functionsGreg Kroah-Hartman1-226/+98
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 197Thomas Gleixner1-1/+1
Based on 1 normalized pattern(s): license terms gnu general public license v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 37 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.724130665@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14mfd: ab8500-debugfs: Fix a typo ("deubgfs")Jonathan Neuschäfer1-1/+1
"debugfs" was misspelled. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-6/+6
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-16mfd: ab8500-debugfs: Use kasprintfHimanshu Jha1-2/+1
Use kasprintf instead of combination of kmalloc and sprintf. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-1/+1
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-07seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macroAndy Shevchenko1-14/+0
The DEFINE_SHOW_ATTRIBUTE() helper macro would be useful for current users, which are many of them, and for new comers to decrease code duplication. Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-01-08mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macroAndy Shevchenko1-344/+62
This macro deduplicates a lot of similar code in the ab8500-debugfs.c module. Targeting to be moved to seq_file.h eventually. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: ab8500-debugfs: Use common error handling code in ↵Markus Elfring1-16/+19
ab8500_print_modem_registers() Add jump targets so that two error messages are stored only once at the end of this function implementation. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-29mfd: ab8500-debugfs: Make it explicitly non-modularPaul Gortmaker1-19/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config AB8500_DEBUG drivers/mfd/Kconfig: bool "Enable debug info via debugfs" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Remove 'weak' function ↵Lee Jones1-9/+1
suspend_test_wake_cause_interrupt_is_mine() There are no other functions which can over-ride it. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()Lee Jones1-54/+0
Doesn't appear to be used. No call sites exist. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Prevent initialised field from being over-writtenLee Jones1-29/+21
Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-28mfd: ab8500-debugfs: fix "between" in printkColin Ian King1-1/+1
fix spelling mistake, beetween -> between Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-14mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formattingLee Jones1-10/+15
WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * the output is wanted in any case */ WARNING: Consecutive strings are generally better as a single string + " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", total: 0 errors, 4 warnings, 3331 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+1
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: ab8500-debugfs: Remove use of seq_printf return valueJoe Perches1-75/+121
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-10-20mfd: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-21mfd: ab8500-debugfs: BIG clean-upLee Jones1-116/+172
When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-debugfs: Simplify invalid debugfs data checkingLee Jones1-7/+7
Noticed during a coding review, if we reorganised the checking a little, we can rid the code of a pointless 'else'. Whilst looking for this particular code hunk I noticed another pointless 'else', which I've subsequently fixed in this patch. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-debugfs: Cleaning up unnecessary to test, unsigned can't be ↵Rickard Strandqvist1-1/+1
negative. Unsigned variable can't be negative so it is unnecessary to test it This was found using a static code analysis program called cppcheck Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-debugfs: Remove unnecessary null test before ↵Fabian Frederick1-2/+1
debugfs_remove_recursive Fix checkpatch warning: WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-debugfs.c: Cleaning up values that are never usedRickard Strandqvist1-2/+1
Remove variable that are never used This was found using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-06mfd: ab8500-debugfs: Move dereference after check for NULLDan Carpenter1-2/+3
We dereference "desc" before check if it is NULL. I've shifted it around so we check first before dereferencing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for ↵Lee Jones1-0/+3
event name The AB8500 debugfs driver allocates memory to contain the name of a new sysfs entry, but fails to apply the proper post-allocation checks. If the device were to run out of memory, the allocation would return NULL. Without the correct checks the driver will continue to populate address NULL with the specified device name which would obviously cause a pointer dereference Oops. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfsLee Jones1-0/+3
The AB8500 debugfs driver allocates memory for a new sysfs entry, but fails to apply the proper post-allocation checks. If the device were to run out of memory, the allocation would return NULL. Without the correct checks the driver will continue to populate NULL->[show|store|...], which would obviously cause a pointer dereference Oops. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: ab8500-debugfs: Staticize local variablesSachin Kamat1-4/+4
Local variables referenced only in this file are made static. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-06-13mfd: ab8500-debug: Convert to managed resources for allocating memoryLee Jones1-22/+12
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: Replace strict_strtoul() with kstrtoul() in ab* and att*Jingoo Han1-1/+1
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-05-17mfd: ab8500: Pass AB8500 IRQ to debugfs code by resourceLinus Walleij1-4/+12
The AB8500 debug code which was merged in parallell with the multiplatform work incidentally introduced a new instance using the <mach/irqs.h> header which is now deleted, causing this build regression: drivers/mfd/ab8500-debugfs.c:95:23: fatal error: mach/irqs.h: No such file or directory compilation terminated. make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1 The code most certainly never worked with device tree either since that does not rely on this kind of hard-coded interrupt numbers. Fix the problem at the root by passing it as a named resource from the ab8500-core driver. Use an untyped resource to stop the MFD core from remapping this IRQ relative to the AB8500 irqdomain. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debugfs: Trivially beautify the debugfs driverLee Jones1-97/+89
Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Convert to kstrtoul_from_usersrinidhi kasagar1-70/+30
Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add explicit dependenciesLinus Walleij1-0/+3
As I am working on SPARSE_IRQ a number of implicit resource grabs in the kernel become evident. For example, some includes like <linux/irqs.h> would implicitly include <mach/irqs.h> and then from there <mach/db8500-regs.h>. In many cases it is masking the fact that drivers do not properly use resources to pass their dependencies, base addresses etc. So write explicit #include statements with TODO items to have this fixed the proper way to all drivers doing this. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add register map for ab8540.Lee Jones1-3/+419
Required to read out correct debug information from the AB chip. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debugfs: Change AB8500 debug permissionsLee Jones1-28/+28
Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add ADC input channel usb_id in debugfsLee Jones1-0/+35
Signed-off-by: Yang QU <yang.qu@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alexandre BOURDIOL <alexandre.bourdiol@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debugfs: Dump sim registersLee Jones1-0/+78
This patch allows to dump the SIM registers from debugfs. It will temporary change the config to allow APE side to read the SIM registers. Note that this read can cause problem on modem side since the modem can't read these registers while the operation is ongoing. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add support for the AB8540Lee Jones1-1/+285
Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add support for ab8505 and ab9540Lee Jones1-11/+372
Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debugfs: Add tests for ab8540 based platform initialisationsLee Jones1-0/+2
Signed-off-by: Alexandre Torgue <alexandre.torgue@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Maxime COQUELIN <maxime.coquelin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add wake-up infoJonas Aaberg1-5/+30
Add information regarding what ab interrupt that caused a wake-up from suspend in <debugfs>/ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Tested-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Better error handling on crashJonas Aaberg1-4/+11
Stop trying to read i2c registers if one fail. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Function to save all ABB registers to memLee Jones1-0/+50
Dump function that stores all readable ABB registers to a memory areas where they can be accessed from dump file. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Print banks in hexMattias Wallin1-9/+9
This patch changes bank prints to use hex value. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Daniel WILLERUD <daniel.willerud@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-gpadc: Add gpadc hw conversionLee Jones1-26/+266
Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: ab8500: Fix compile errorLinus Walleij1-0/+1
When compiling the AB8500 core driver in the latest MFD tree the following happens: CC drivers/mfd/ab8500-debugfs.o /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:3: error: 'AB8500_SYS_CTRL1_BLOCK' undeclared here (not in a function) /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: array index in initializer not of integer type /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: (near initialization for 'debug_ranges') (...) This is due to a missing include statement, so fix it up. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-04mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameterPhilippe Langlais1-13/+13
The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 03:35:36 +0000