summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-02-24Merge tag 'sfi-removal-5.12-rc1' of ↵Linus Torvalds1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki: "Drop support for depercated platforms using SFI, drop the entire support for SFI that has been long deprecated too and make some janitorial changes on top of that (Andy Shevchenko)" * tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/platform/intel-mid: Update Copyright year and drop file names x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co. x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h x86/PCI: Describe @reg for type1_access_ok() x86/PCI: Get rid of custom x86 model comparison sfi: Remove framework for deprecated firmware cpufreq: sfi-cpufreq: Remove driver for deprecated firmware media: atomisp: Remove unused header mfd: intel_msic: Remove driver for deprecated platform x86/apb_timer: Remove driver for deprecated platform x86/platform/intel-mid: Remove unused leftovers (vRTC) x86/platform/intel-mid: Remove unused leftovers (msic) x86/platform/intel-mid: Remove unused leftovers (msic_thermal) x86/platform/intel-mid: Remove unused leftovers (msic_power_btn) x86/platform/intel-mid: Remove unused leftovers (msic_gpio) x86/platform/intel-mid: Remove unused leftovers (msic_battery) x86/platform/intel-mid: Remove unused leftovers (msic_ocd) x86/platform/intel-mid: Remove unused leftovers (msic_audio) platform/x86: intel_scu_wdt: Drop mistakenly added const
2021-02-09mfd: intel_msic: Remove driver for deprecated platformAndy Shevchenko1-9/+0
Intel Moorestown and Medfield are quite old Intel Atom based 32-bit platforms, which were in limited use in some Android phones, tablets and consumer electronics more than eight years ago. There are no bugs or problems ever reported outside from Intel for breaking any of that platforms for years. It seems no real users exists who run more or less fresh kernel on it. Commit 05f4434bc130 ("ASoC: Intel: remove mfld_machine") is also in align with this theory. Due to above and to reduce a burden of supporting outdated drivers, remove the support for outdated platforms completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-08mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500Dmitry Osipenko1-0/+11
Acer Iconia Tab A500 is an Android tablet device, it has ENE KB930 Embedded Controller which provides battery-gauge, LED, GPIO and some other functions. The EC uses firmware that is specifically customized for Acer A500. This patch adds MFD driver for the Embedded Controller which allows to power-off / reboot the A500 device, it also provides a common register read/write API that will be used by the sub-devices. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-02-08mfd: sgi-ioc3: Turn Kconfig option into a boolThomas Bogendoerfer1-1/+1
Module builds of ioc3 fail with following errors: ERROR: "spurious_interrupt" [drivers/mfd/ioc3.ko] undefined! ERROR: "pci_find_host_bridge" [drivers/mfd/ioc3.ko] undefined! Exporting pci_find_host_bridge got rejected by maintainer, so easiest fix is to disable module building, which even makes sense since both SGI Origin and Octane always contain at least one IOC3 chip. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-12-02mfd: kempld-core: Add support for additional devicesMichael Brunner1-27/+3
This update includes DMI IDs for the following Kontron modules and systems: COMe-bDV7, COMe-cDV7, COMe-m4AL, COMe-mCT10, SMARC-sXAL, SMARC-sXA4, Qseven-Q7AL, mITX-APL, pITX-APL and KBox A-203 Furthermore the ACPI HID KEM0000 is added, as it is also reserved for kempld devices. Instead of also adding the newly supported devices to the Kconfig description this patch removes the lengthy list. With future usage of the ACPI HIDs it will not be necessary to explicitly add support for each individual device to the driver and therefore the list would become incomplete anyway. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-27mfd: omap-usb: Depend on COMMON_CLK to fix compile testsKrzysztof Kozlowski1-0/+1
The MFD_OMAP_USB_HOST uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with LANTIQ): mips-linux-ld: drivers/mfd/omap-usb-host.o: in function `usbhs_omap_probe': omap-usb-host.c:(.text+0x940): undefined reference to `clk_set_parent' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-19mfd: MFD_SL28CPLD should depend on ARCH_LAYERSCAPEGeert Uytterhoeven1-0/+1
Currently the Kontron sl28cpld Board Management Controller is found only on Kontron boards equipped with a Freescale Layerscape SoC. Hence add a dependency on ARCH_LAYERSCAPE, to prevent asking the user about a driver for this controller when configuring a kernel without Layerscape support. Fixes: a538ad229bbee4f8 ("mfd: simple-mfd-i2c: Add sl28cpld support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-04mfd: Intel Platform Monitoring Technology supportDavid E. Box1-0/+10
Intel Platform Monitoring Technology (PMT) is an architecture for enumerating and accessing hardware monitoring facilities. PMT supports multiple types of monitoring capabilities. This driver creates platform devices for each type so that they may be managed by capability specific drivers (to be introduced). Capabilities are discovered using PCIe DVSEC ids. Support is included for the 3 current capability types, Telemetry, Watcher, and Crashlog. The features are available on new Intel platforms starting from Tiger Lake for which support is added. This patch adds support for Tiger Lake (TGL), Alder Lake (ADL), and Out-of-Band Management Services Module (OOBMSM). Also add a quirk mechanism for several early hardware differences and bugs. For Tiger Lake and Alder Lake, do not support Watcher and Crashlog capabilities since they will not be compatible with future product. Also, fix use a quirk to fix the discovery table offset. Co-developed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-10-05mfd: sl28cpld: Depend on I2CLee Jones1-0/+1
Fixes the following randconfig build error: ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_probe': simple-mfd-i2c.c:(.text+0x48): undefined reference to `__devm_regmap_init_i2c' ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_driver_init': simple-mfd-i2c.c:(.init.text+0x14): undefined reference to `i2c_register_driver' ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_driver_exit': simple-mfd-i2c.c:(.exit.text+0xd): undefined reference to `i2c_del_driver' Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: asic3: Build if COMPILE_TEST=yMarek Behún1-1/+2
Build this driver on another platforms if COMPILE_TEST=y. Another drivers may depend on this, for example leds-asic3. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PACXu Yilun1-0/+13
This patch implements the basic functions of the BMC chip for some Intel FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the Intel MAX 10 CPLD. This BMC chip is connected to the FPGA by a SPI bus. To provide direct register access from the FPGA, the "SPI slave to Avalon Master Bridge" (spi-avmm) IP is integrated in the chip. It converts encoded streams of bytes from the host to the internal register read/write on the Avalon bus. So This driver uses the regmap-spi-avmm for register accessing. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: ene-kb3930: Add driver for ENE KB3930 Embedded ControllerLubomir Rintel1-0/+11
This driver provides access to the EC RAM of said embedded controller attached to the I2C bus as well as optionally supporting its slightly weird power-off/restart protocol. A particular implementation of the EC firmware can be identified by a model byte. If this driver identifies the Dell Ariel platform, it registers the appropriate cells. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: Kconfig: Fix typo of 'individual'Mauro Carvalho Chehab1-1/+1
individul -> individual Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17mfd: simple-mfd-i2c: Add sl28cpld supportMichael Walle1-0/+10
Add the core support for the board management controller found on the SMARC-sAL28 board. Also add a virtual symbol which pulls in the simple-mfd-i2c driver and provide a common symbol on which the subdevice drivers can depend on. At the moment, this controller is used on the Kontron SMARC-sAL28 board. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17mfd: Add simple regmap based I2C driverMichael Walle1-0/+12
There are I2C devices which contain several different functions but doesn't require any special access functions. For these kind of drivers an I2C regmap should be enough. Create an I2C driver which creates an I2C regmap and enumerates its children. If a device wants to use this as its MFD core driver, it has to add an individual compatible string. It may provide its own regmap configuration. Subdevices can use dev_get_regmap() on the parent to get their regmap instance. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: smsc-ece1099: Remove driverMichael Walle1-12/+0
This MFD driver has no user. The keypad driver of this device never made it into the kernel. Therefore, this driver is useless. Remove it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-06-18mfd: Add support for the Khadas System control MicrocontrollerNeil Armstrong1-0/+21
This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge boards. It has multiple boot control features like password check, power-on options, power-off control and system FAN control on recent boards. This implements a very basic MFD driver with the fan control and User NVMEM cells. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-5/+5
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-04Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-3/+2
Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...
2020-05-27mfd: Add support for PMIC MT6360Gene Chen1-0/+12
Add MFD driver for mt6360 pmic chip include Battery Charger/ USB_PD/Flash, LED/RGB and LED/LDO/Buck Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26Merge branches 'ib-mfd-x86-usb-watchdog-5.8', 'ib-mfd-power-rtc-5.8', ↵Lee Jones1-0/+24
'ib-mfd-iio-power-5.8' and 'ib-mfd-hwmon-5.8' into ibs-for-mfd-merged
2020-05-26mfd: mp2629: Add support for mps battery chargerSaravanan Sekar1-0/+9
mp2629 is a highly-integrated switching-mode battery charge management device for single-cell Li-ion or Li-polymer battery. Add MFD core enables chip access for ADC driver for battery readings, and a power supply battery-charger driver Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-20mfd: Add Gateworks System Controller core driverTim Harvey1-0/+15
The Gateworks System Controller (GSC) is an I2C slave controller implemented with an MSP430 micro-controller whose firmware embeds the following features: - I/O expander (16 GPIO's) using PCA955x protocol - Real Time Clock using DS1672 protocol - User EEPROM using AT24 protocol - HWMON using custom protocol - Interrupt controller with tamper detect, user pushbotton - Watchdog controller capable of full board power-cycle - Power Control capable of full board power-cycle see http://trac.gateworks.com/wiki/gsc for more details Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-13mfd: vexpress-sysreg: Support building as a moduleRob Herring1-1/+1
Enable building the vexpress-sysreg driver as a module. As deferred probe between the vexpress components works now, we don't need to create struct devices early with of_platform_device_create(). Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-13mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIORob Herring1-2/+1
Nothing in the VExpress sysregs nor the MFD child drivers use CONFIG_CLKSRC_MMIO. There's the 24MHz counter, but that's handled by drivers/clocksource/timer-versatile.c which doesn't use CONFIG_CLKSRC_MMIO either. So let's just drop CONFIG_CLKSRC_MMIO. As the !ARCH_USES_GETTIMEOFFSET dependency was added for CONFIG_CLKSRC_MMIO, that can be dropped, too. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-24platform/x86: intel_pmc_ipc: Convert to MFDMika Westerberg1-1/+15
This driver only creates a bunch of platform devices sharing resources belonging to the PMC device. This is pretty much what MFD subsystem is for so move the driver there, renaming it to intel_pmc_bxt.c which should be more clear what it is. MFD subsystem provides nice helper APIs for subdevice creation so convert the driver to use those. Unfortunately the ACPI device includes separate resources for most of the subdevices so we cannot simply call mfd_add_devices() to create all of them but instead we need to call it separately for each device. The new MFD driver continues to expose two sysfs attributes that allow userspace to send IPC commands to the PMC/SCU to avoid breaking any existing applications that may use these. Generally this is bad idea so document this in the ABI documentation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-04-24platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driverMika Westerberg1-2/+2
The SCU IPC functionality is usable outside of Intel MID devices. For example modern Intel CPUs include the same thing but now it is called PMC (Power Management Controller) instead of SCU. To make the IPC available for those split the driver into core part (intel_scu_ipc.c) and the SCU PCI driver part (intel_scu_pcidrv.c) which then calls the former before it goes and creates rest of the SCU devices. The SCU IPC will also register a new class that gets assigned to the device that is created under the parent PCI device. We also split the Kconfig symbols so that INTEL_SCU_IPC enables the SCU IPC library and INTEL_SCU_PCI the SCU driver and convert the users accordingly. While there remove default y from the INTEL_SCU_PCI symbol as it is already selected by X86_INTEL_MID. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: Kconfig: Fix some misspelling of the word functionalityChristophe JAILLET1-4/+4
Fix several variations of typo around functionali{ty,es}. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: cpcap: Fix compile if MFD_CORE is not selectedTony Lindgren1-0/+1
If only cpcap mfd driver is selected we will get: ERROR: "devm_mfd_add_devices" [drivers/mfd/motorola-cpcap.ko] undefined! This is because Kconfig is missing select for MFD_CORE. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30Merge branches 'ib-mfd-iio-input-5.7' and 'ib-mfd-iio-rtc-5.7' into ↵Lee Jones1-0/+1
ibs-for-mfd-merged
2020-03-27mfd: rn5t618: Add IRQ supportAndreas Kemnade1-0/+1
This adds support for IRQ handling in the RC5T619 which is required for properly implementing subdevices like RTC. For now only definitions for the variant RC5T619 are included. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27mfd: Add support for Azoteq IQS620A/621/622/624/625Jeff LaBundy1-0/+13
This patch adds core support for the Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-02-03Merge tag 'mfd-next-5.6' of ↵Linus Torvalds1-1/+29
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for ROHM BD71828 PMICs and GPIOs - Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341 New Device Support: - Add support for BD71828 to BD70528 RTC driver - Add support for Intel's Jasper Lake to LPSS PCI New Functionality: - Add support for Power Key to ROHM BD71828 - Add support for Clocks to ROHM BD71828 - Add support for GPIOs to Dialog DA9062 - Add support for USB PD Notify to ChromiumOS EC - Allow callers to specify args when requesting regmap lookup; syscon Fix-ups: - Improve error handling and sanity checking; atmel-hlcdc, dln2 - Device Tree support/documentation; bd71828, da9062, xylon,logicvc, ab8500, max14577, atmel-usart - Match devices using platform IDs; bd7xxxx - Refactor BD718x7 regulator component; bd718x7-regulator - Use standard interfaces/helpers; syscon, sm501 - Trivial (whitespace, spelling, etc); ab8500-core, Kconfig - Remove unused code; db8500-prcmu, tqmx86 - Wait until boot has finished before accessing registers; madera-core - Provide missing register value defaults; cs47l15-tables - Allow more time for hardware to reset; madera-core Bug Fixes: - Fix erroneous register values; rohm-bd70528 - Fix register volatility; axp20x, rn5t618 - Fix Kconfig dependencies; MFD_MAX77650 - Fix incorrect compatible string; da9062-core - Fix syscon_regmap_lookup_by_phandle_args() stub; syscon" * tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits) mfd: syscon: Fix syscon_regmap_lookup_by_phandle_args() dummy mfd: wcd934x: Add support to wcd9340/wcd9341 codec mfd: syscon: Add arguments support for syscon reference mfd: rn5t618: Mark ADC control register volatile dt-bindings: atmel-usart: Add microchip,sam9x60-{usart, dbgu} dt-bindings: atmel-usart: Remove wildcard mfd: cros_ec: Add cros-usbpd-notify subdevice mfd: da9062: Fix watchdog compatible string mfd: madera: Allow more time for hardware reset mfd: cs47l15: Add missing register default mfd: madera: Wait for boot done before accessing any other registers mfd: Kconfig: Rename Samsung to lowercase mfd: tqmx86: remove set but not used variable 'i2c_ien' mfd: dbx500-prcmu: Drop DSI pll clock functions mfd: dbx500-prcmu: Drop set_display_clocks() mfd: max77650: Select REGMAP_IRQ in Kconfig mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile mfd: ab8500: Fix ab8500-clk typo mfd: intel-lpss: Add Intel Jasper Lake PCI IDs dt-bindings: mfd: max14577: Add reference to max14040_battery.txt descriptions ...
2020-01-29mfd: wcd934x: Add support to wcd9340/wcd9341 codecSrinivas Kandagatla1-0/+12
Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC. This codec has integrated SoundWire controller, pin controller and interrupt controller. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: Kconfig: Rename Samsung to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: max77650: Select REGMAP_IRQ in KconfigBartosz Golaszewski1-0/+1
MAX77650 MFD driver uses regmap_irq API but doesn't select the required REGMAP_IRQ option in Kconfig. This can cause the following build error if regmap irq is not enabled implicitly by someone else: ld: drivers/mfd/max77650.o: in function `max77650_i2c_probe': max77650.c:(.text+0xcb): undefined reference to `devm_regmap_add_irq_chip' ld: max77650.c:(.text+0xdb): undefined reference to `regmap_irq_get_domain' make: *** [Makefile:1079: vmlinux] Error 1 Fix it by adding the missing option. Fixes: d0f60334500b ("mfd: Add new driver for MAX77650 PMIC") Reported-by: Paul Gazzillo <paul@pgazz.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: bd71828: Support ROHM BD71828 PMIC - coreMatti Vaittinen1-0/+15
BD71828GW is a single-chip power management IC for battery-powered portable devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA single-cell linear charger. Also included is a Coulomb counter, a real-time clock (RTC), 3 GPO/regulator control pins, HALL input and a 32.768 kHz clock gate. Add MFD core driver providing interrupt controller facilities and i2c access to sub device drivers. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-09mfd: ioc3: Add driver for SGI IOC3 chipThomas Bogendoerfer1-0/+13
SGI IOC3 chip has integrated ethernet, keyboard and mouse interface. It also supports connecting a SuperIO chip for serial and parallel interfaces. IOC3 is used inside various SGI systemboards and add-on cards with different equipped external interfaces. Support for ethernet and serial interfaces were implemented inside the network driver. This patchset moves out the not network related parts to a new MFD driver, which takes care of card detection, setup of platform devices and interrupt distribution for the subdevices. Serial portion: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Network part: Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Network part: Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: James Hogan <jhogan@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-serial@vger.kernel.org
2019-10-18mfd: Switch the AB8500 GPADC to IIOLinus Walleij1-7/+0
The AB8500 GPADC driver is indeed a "general purpose ADC" driver, and while the IIO subsystem did not exist when the driver was first merged, it is never too late to clean things up and move it to the right place. Nowadays IIO provides the right abstractions and interfaces to do generic ADC work in the kernel. We have to cut a bunch of debugfs luggage to make this transition swift, but all these files to is read out the raw values of the ADC and the IIO subsystem already has a standard sysfs ABI for doing exactly this: no debugfs is needed. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-09-23Merge tag 'mfd-next-5.4' of ↵Linus Torvalds1-9/+11
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Merrifield Basin Cove PMIC New Device Support: - Add support for Intel Tiger Lake to Intel LPSS PCI - Add support for Intel Sky Lake to Intel LPSS PCI - Add support for ST-Ericsson DB8520 to DB8500 PRCMU New Functionality: - Add RTC and PWRC support to MT6323 Fix-ups: - Clean-up include files; davinci_voicecodec, asic3, sm501, mt6397 - Ignore return values from debugfs_create*(); ab3100-*, ab8500-debugfs, aat2870-core - Device Tree changes; rn5t618, mt6397 - Use new I2C API; tps80031, 88pm860x-core, ab3100-core, bcm590xx, da9150-core, max14577, max77693, max77843, max8907, max8925-i2c, max8997, max8998, palmas, twl-core, - Remove obsolete code; da9063, jz4740-adc - Simplify semantics; timberdale, htc-i2cpld - Add 'fall-through' tags; omap-usb-host, db8500-prcmu - Remove superfluous prints; ab8500-debugfs, db8500-prcmu, fsl-imx25-tsadc, intel_soc_pmic_bxtwc, qcom_rpm, sm501 - Trivial rename/whitespace/typo fixes; mt6397-core, MAINTAINERS - Reorganise code structure; mt6397-* - Improve code consistency; intel-lpss - Use MODULE_SOFTDEP() helper; intel-lpss - Use DEFINE_RES_*() helpers; mt6397-core Bug Fixes: - Clean-up resources; max77620 - Prevent input events being dropped on resume; intel-lpss-pci - Prevent sleeping in IRQ context; ezx-pcap" * tag 'mfd-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits) mfd: mt6323: Add MT6323 RTC and PWRC mfd: mt6323: Replace boilerplate resource code with DEFINE_RES_* macros mfd: mt6397: Add mutex include dt-bindings: mfd: mediatek: Add MT6323 Power Controller dt-bindings: mfd: mediatek: Update RTC to include MT6323 dt-bindings: mfd: mediatek: mt6397: Change to relative paths mfd: db8500-prcmu: Support the higher DB8520 ARMSS mfd: intel-lpss: Use MODULE_SOFTDEP() instead of implicit request mfd: htc-i2cpld: Drop check because i2c_unregister_device() is NULL safe mfd: sm501: Include the GPIO driver header mfd: intel-lpss: Add Intel Skylake ACPI IDs mfd: intel-lpss: Consistently use GENMASK() mfd: Add support for Merrifield Basin Cove PMIC mfd: ezx-pcap: Replace mutex_lock with spin_lock mfd: asic3: Include the right header MAINTAINERS: altera-sysmgr: Fix typo in a filepath mfd: mt6397: Extract IRQ related code from core driver mfd: mt6397: Rename macros to something more readable mfd: Remove dev_err() usage after platform_get_irq() mfd: db8500-prcmu: Mark expected switch fall-throughs ...
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds1-17/+9
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-03mfd: don't select DMA_DECLARE_COHERENT for the sm501 and tc6393xb driversChristoph Hellwig1-2/+0
Now that these drivers use the usb localmem pool there is no need to select DMA_DECLARE_COHERENT. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190903084615.19161-7-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-02mfd / platform: cros_ec: Rename config to a better nameEnric Balletbo i Serra1-7/+10
The cros-ec-dev is a multifunction device that now doesn't implement any chardev communication interface. MFD_CROS_EC_CHARDEV doesn't look a good name to describe that device and can cause confusion. Hence rename it to CROS_EC_DEV. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd / platform: cros_ec: Move cros-ec core driver out from MFDEnric Balletbo i Serra1-13/+2
Now, the ChromeOS EC core driver has nothing related to an MFD device, so move that driver from the MFD subsystem to the platform/chrome subsystem. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd: Add support for Merrifield Basin Cove PMICAndy Shevchenko1-0/+11
Add an MFD driver for Intel Merrifield Basin Cove PMIC. Firmware on the platforms which are using Basin Cove PMIC is "smarter" than on the rest supported by vanilla kernel. It handles first level of interrupt itself, while others do it on OS level. The driver is done in the same way as the rest of Intel PMIC MFD drivers in the kernel to support the initial design. The design allows to use one driver among few PMICs without knowing implementation details of the each hardware version or generation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-12mfd: Drop obsolete JZ4740 driverPaul Cercueil1-9/+0
It has been replaced with the ingenic-iio driver for the ADC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-15Merge tag 'mfd-next-5.3' of ↵Linus Torvalds1-3/+34
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ...
2019-07-09Merge tag 'leds-for-5.3-rc1' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - Add a new LED common module for ti-lmu driver family - Modify MFD ti-lmu bindings - add ti,brightness-resolution - add the ramp up/down property - Add regulator support for LM36274 driver to lm363x-regulator.c - New LED class drivers with DT bindings: - leds-spi-byte - leds-lm36274 - leds-lm3697 (move the support from MFD to LED subsystem) - Simplify getting the I2C adapter of a client: - leds-tca6507 - leds-pca955x - Convert LED documentation to ReST * tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt docs: leds: convert to ReST leds: leds-tca6507: simplify getting the adapter of a client leds: leds-pca955x: simplify getting the adapter of a client leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: max77650: Remove set but not used variable 'parent' leds: avoid flush_work in atomic context leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices leds: spi-byte: add single byte SPI LED driver dt-bindings: leds: Add binding for spi-byte LED. dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property
2019-07-02mfd: madera: Add Madera core support for CS47L92Richard Fitzgerald1-0/+7
This patch adds all the core support and defines for the Cirrus Logic CS42L92, CS47L92 and CS47L93 smart audio CODECs. Registers or fields are named MADERA_* if it is part of the common hardware platform and does not conflict with any other Madera codecs. It is named CS47L15_* if it is unique to CS47L15 and conflicts with definitions on other codecs. Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: madera: Add Madera core support for CS47L15Richard Fitzgerald1-0/+7
This patch adds all the core support and defines for the Cirrus Logic CS47L15 smart audio CODEC. Registers or fields are named MADERA_* if it is part of the common hardware platform and does not conflict with any other Madera codecs. It is named CS47L15_* if it is unique to CS47L15 and conflicts with definitions on other codecs. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 01:31:23 +0000