summaryrefslogtreecommitdiffstats
path: root/drivers/message
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03scsi: mptscsih: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/message/fusion/mptscsih.c: In function mptscsih_io_done : drivers/message/fusion/mptscsih.c:741:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if ( ioc->bus_type == SAS ) { ^ drivers/message/fusion/mptscsih.c:790:3: note: here case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ ^~~~ drivers/message/fusion/mptscsih.c:884:4: warning: this statement may fall through [-Wimplicit-fallthrough=] scsi_set_resid(sc, 0); ^~~~~~~~~~~~~~~~~~~~~ drivers/message/fusion/mptscsih.c:885:3: note: here case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: mptfusion: remove set, but not used, variablesYueHaibing1-5/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/message/fusion/mptspi.c: In function 'mptspi_writeIOCPage4': drivers/message/fusion/mptspi.c:262:9: warning: variable 'frameOffset' set but not used [-Wunused-but-set-variable] drivers/message/fusion/mptspi.c:261:9: warning: variable 'req_idx' set but not used [-Wunused-but-set-variable] They're never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: mptfusion: mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/message/fusion/mptbase.c: In function mptbase_reply : drivers/message/fusion/mptbase.c:643:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (event != MPI_EVENT_EVENT_CHANGE) ^ drivers/message/fusion/mptbase.c:646:2: note: here case MPI_FUNCTION_CONFIG: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: mptfusion: fix indentation issuesColin Ian King3-20/+20
There are several statements and code blocks there are incorrectly indented. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18scsi: flip the default on use_clusteringChristoph Hellwig3-3/+0
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: mptfusion: Remove unnecessary parenthesesNathan Chancellor1-2/+2
Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/message/fusion/mptbase.c:338:11: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((ioc == NULL)) ~~~~^~~~~~~ drivers/message/fusion/mptbase.c:338:11: note: remove extraneous parentheses around the comparison to silence this warning if ((ioc == NULL)) ~ ^ ~ drivers/message/fusion/mptbase.c:338:11: note: use '=' to turn this equality comparison into an assignment if ((ioc == NULL)) ^~ = drivers/message/fusion/mptbase.c:342:12: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((pdev == NULL)) ~~~~~^~~~~~~ drivers/message/fusion/mptbase.c:342:12: note: remove extraneous parentheses around the comparison to silence this warning if ((pdev == NULL)) ~ ^ ~ drivers/message/fusion/mptbase.c:342:12: note: use '=' to turn this equality comparison into an assignment if ((pdev == NULL)) ^~ = 2 warnings generated. Remove them and while we're at it, simplify the NULL checks as '!var' is used more than 'var == NULL'. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-11scsi: message: fusion: fix a few trivial spelling mistakesColin Ian King3-9/+9
Trival fix to spelling mistakes: PrimativeSeqErrCount -> PrimitiveSeqErrCount Primative -> Primitive primative -> primitive mptsas_broadcast_primative_work -> mptsas_broadcast_primitive_work Broadcase -> Broadcast Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: message: fusion: Replace GFP_ATOMIC with GFP_KERNELJia-Ju Bai2-2/+2
mpt_attach() and mptfc_probe() are never called in atomic context. They call kzalloc() and kcalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: mptctl: change strncpy+truncation to strlcpyDominique Martinet1-2/+2
Generated by scripts/coccinelle/misc/strncpy_truncation.cocci Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-10scsi: mptfusion: mark expected switch fall-throughsGustavo A. R. Silva2-0/+4
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-3/+4
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds5-6/+6
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds1-46/+11
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-05-29block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONEChristoph Hellwig1-1/+1
The BLK_EH_NOT_HANDLED implies nothing happen, but very often that is not what is happening - instead the driver already completed the command. Fix the symbolic name to reflect that a little better. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig1-46/+11
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-14scsi: mptlan: Fix mpt_lan_sdu_send()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: mptsas: fix spelling mistake: "matchs" -> "matches"Colin Ian King1-1/+1
Trivial fix to spelling mistake in warning message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: mptfusion: fix spelling mistake: "initators" -> "initiators"Colin Ian King1-1/+1
Trivial fix to spelling mistake in text string. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: mptfc: fix spelling mistake in macro namesColin Ian King2-3/+3
Rename macros MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN and MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN to add in missing N in UNKNOWN Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-18scsi: mptsas: Disable WRITE SAMEMartin K. Petersen1-0/+1
First generation MPT Fusion controllers can not translate WRITE SAME when the attached device is a SATA drive. Disable WRITE SAME support. Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-26treewide: Align function definition open/close bracesJoe Perches1-1/+1
Some functions definitions have either the initial open brace and/or the closing brace outside of column 1. Move those braces to column 1. This allows various function analyzers like gnu complexity to work properly for these modified functions. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-30scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()Dan Carpenter1-0/+2
My static checker complains about an out of bounds read: drivers/message/fusion/mptctl.c:2786 mptctl_hp_targetinfo() error: buffer overflow 'hd->sel_timeout' 255 <= u32max. It's true that we probably should have a bounds check here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-17scsi: mptsas: remove duplicated assignment to pointer headColin Ian King1-1/+0
The pointer head is re-assigned the same value twice, so remove the second redundant assignment. Cleans up clang warning: drivers/message/fusion/mptsas.c:1161:20: warning: Value stored to 'head' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-17scsi: mptfusion: Use snprintf() instead of open coded divisionsAndy Shevchenko1-18/+7
Numbers up to 100 snprintf() prints without using a division. Besides that the code looks more readable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-08scsi: mptfusion: use strlcpy() instead of strncpy()Xiongfeng Wang1-1/+1
gcc-8 reports drivers/message/fusion/mptbase.c: In function 'mpt_display_event_info': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 100 equals destination size [-Wstringop-truncation] We need to use strlcpy() to make sure the dest string is nul-terminated. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-07scsi: fusion: clean up some indentationsColin Ian King1-28/+29
There are several places where the source is not indented correctly with either too many or too few levels of intentation. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman15-0/+15
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook1-2/+2
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-08-29scsi: scsi_transport_sas: switch to bsg-lib for SMP passthroughChristoph Hellwig1-42/+37
Simplify the SMP passthrough code by switching it to the generic bsg-lib helpers that abstract away the details of the request code, and gets drivers out of seeing struct scsi_request. For the libsas host SMP code there is a small behavior difference in that we now always clear the residual len for successful commands, similar to the three other SMP handler implementations. Given that there is no partial command handling in the host SMP handler this should not matter in practice. [mkp: typos and checkpatch fixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: mptsas: Fixup device hotplug for VMWare ESXiHannes Reinecke1-4/+3
VMWare ESXi emulates an mptsas HBA, but exposes all drives as direct-attached SAS drives. This it not how the driver originally envisioned things; SAS drives were supposed to be connected via an expander, and only SATA drives would be direct attached. As such, any hotplug event for direct-attach SAS drives was silently ignored, and the guest failed to detect new drives from within a VMWare ESXi environment. [mkp: typos] Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1030850 Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: mptfc: Do not call fc_block_scsi_eh() on host resetHannes Reinecke1-9/+1
When we're resetting the host any remote port states will be reset anyway, so it's pointless to wait for dev_loss_tmo during host reset. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07scsi: fusion: fix string overflow warningArnd Bergmann1-4/+4
gcc points out a theorerical string overflow: drivers/message/fusion/mptbase.c: In function 'mpt_detach': drivers/message/fusion/mptbase.c:2103:17: error: '%s' directive writing up to 31 bytes into a region of size 28 [-Werror=format-overflow=] sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); ^~~~~ drivers/message/fusion/mptbase.c:2103:2: note: 'sprintf' output between 13 and 44 bytes into a destination of size 32 We can simply double the size of the local buffer here to be on the safe side, and using snprintf() instead of sprintf() protects us if ioc->name was not terminated properly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-24scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()Hannes Reinecke3-4/+15
Commit c5ce0abeb628 ("scsi: sas: move scsi_remove_host call...") moved the call to scsi_remove_host() into sas_remove_host(), but forgot to modify the mpt drivers. Fixes: c5ce0abeb628 ("scsi: sas: move scsi_remove_host call into sas_remove_host") Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-24scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"Colin Ian King1-1/+1
trivial fix to spelling mistake Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-2/+2
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...
2017-02-06scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig2-1/+2
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-27block: split scsi_request out of struct requestChristoph Hellwig1-4/+4
And require all drivers that want to support BLOCK_PC to allocate it as the first thing of their private data. To support this the legacy IDE and BSG code is switched to set cmd_size on their queues to let the block layer allocate the additional space. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-05scsi: mptlan: Remove linux/miscdevice.h from mptlan.hCorentin Labbe1-1/+0
This patch remove linux/miscdevice.h from mptlan.h since mptlan.h does not contain any miscdevice. The only user of it is mptctl.c which already include linux/miscdevice.h So no need to include it twice. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds2-2/+2
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-25/+14
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas). There's also an assortment of minor fixes, mostly in error legs or other not very user visible stuff. The major change is the pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this effectively makes IRQ mapping generic for the drivers and allows blk_mq to use the information" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits) scsi: qla4xxx: switch to pci_alloc_irq_vectors scsi: hisi_sas: support deferred probe for v2 hw scsi: megaraid_sas: switch to pci_alloc_irq_vectors scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices scsi: be2iscsi: set errno on error path scsi: be2iscsi: set errno on error path scsi: hpsa: fallback to use legacy REPORT PHYS command scsi: scsi_dh_alua: Fix RCU annotations scsi: hpsa: use %phN for short hex dumps scsi: hisi_sas: fix free'ing in probe and remove scsi: isci: switch to pci_alloc_irq_vectors scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI scsi: dpt_i2o: double free on error path scsi: cxlflash: Migrate scsi command pointer to AFU command scsi: cxlflash: Migrate IOARRIN specific routines to function pointers scsi: cxlflash: Cleanup queuecommand() scsi: cxlflash: Cleanup send_tmf() scsi: cxlflash: Remove AFU command lock scsi: cxlflash: Wait for active AFU commands to timeout upon tear down scsi: cxlflash: Remove private command pool ...
2016-11-17scsi: mptfusion: Fix printk continuationsHelge Deller1-7/+7
Fix the printk continuations when running the mptfusion driver. This patch brings the capabilities into one single syslog line again: mptbase: ioc1: Initiating bringup ioc1: LSI53C1030 B2: Capabilities={Initiator,Target} scsi host3: ioc1: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=67 Tested on a parisc C8000 machine. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: fusion: print lan address via %pMRAndy Shevchenko1-10/+4
LAN MAC addresses can be printed directly using %pMR specifier. Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: mptscsih: Remove bogus interpretation of request->ioprioChristoph Hellwig1-8/+3
Having an I/O priority does not mean we should send all requests as HEAD OF QUEUE tags. Reported-by: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-20net: use core MTU range checking in misc driversJarod Wilson1-11/+4
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-14scsi: fusion: Fix error return code in mptfc_probe()Wei Yongjun1-1/+3
Fix to return error code -ENOMEM from the workqueue alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-02scsi: mpt: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-3/+4
The workqueues "ioc->reset_work_q" and "ioc->fw_event_q" queue a single work item &ioc->fault_reset_work and &fw_event->work, respectively and hence don't require ordering. Hence, they have been converted to use alloc_workqueue(). The WQ_MEM_RECLAIM flag has been set to ensure forward progress under memory pressure since the workqueue belongs to a storage driver which is being used on a memory reclaim path. Since there are fixed number of work items, explicit concurrency limit is unnecessary here. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-02scsi: mptfc: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-1/+2
The workqueue "fc_rescan_work_q" queues multiple work items viz &ioc->fc_rescan_work, &ioc->fc_lsc_work, &ioc->fc_setup_reset_work, which require strict execution ordering. Hence, an ordered dedicated workqueue has been used. WQ_MEM_RECLAIM has been set since the workqueue is belongs to a storage driver which is being used on a memory reclaim path and hence, requires forward progress under memory pressure. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-18Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-3/+3
Pull SCSI updates from James Bottomley: "First round of SCSI updates for the 4.6+ merge window. This batch includes the usual quota of driver updates (bnx2fc, mp3sas, hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas). There's also a multiqueue update for scsi_debug, assorted bug fixes and a few other minor updates (refactor of scsi_sg_pools into generic code, alua and VPD updates, and struct timeval conversions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits) mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs mpt3sas: Set maximum transfer length per IO to 4MB for VDs mpt3sas: Updating mpt3sas driver version to 13.100.00.00 mpt3sas: Fix initial Reference tag field for 4K PI drives. mpt3sas: Handle active cable exception event mpt3sas: Update MPI header to 2.00.42 Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy" eata_pio: missing break statement hpsa: Fix type ZBC conditional checks scsi_lib: Decode T10 vendor IDs scsi_dh_alua: do not fail for unknown VPD identification scsi_debug: use locally assigned naa scsi_debug: uuid for lu name scsi_debug: vpd and mode page work scsi_debug: add multiple queue support bfa: fix bfa_fcb_itnim_alloc() error handling megaraid_sas: Downgrade two success messages to info cxlflash: Fix to resolve dead-lock during EEH recovery scsi_debug: rework resp_report_luns scsi_debug: use pdt constants ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 15:20:16 +0000