summaryrefslogtreecommitdiffstats
path: root/drivers/memstick/host
AgeCommit message (Collapse)AuthorFilesLines
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas1-1/+1
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-21memstick: Fix Kconfig indentationKrzysztof Kozlowski1-2/+2
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13memstick: jmb38x_ms: clean up indentation issueColin Ian King1-6/+6
There is a hunk of code that is indented one level too deep, fix this by removing the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov1-1/+1
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-10-09memstick: jmb38x_ms: Fix an error handling path in 'jmb38x_ms_probe()'Christophe JAILLET1-1/+1
If 'jmb38x_ms_count_slots()' returns 0, we must undo the previous 'pci_request_regions()' call. Goto 'err_out_int' to fix it. Fixes: 60fdd931d577 ("memstick: add support for JMicron jmb38x MemoryStick host controller") Cc: stable@vger.kernel.org Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11memstick: r592: Use dev_get_drvdataChuhong Yuan1-4/+2
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner4-18/+4
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 13 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.236620792@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds2-6/+0
Pull MMC updates from Ulf Hansson: "MMC core: - Fix a few memoryleaks - Minor improvements to the card initialization sequence - Partially support sleepy GPIO controllers for pwrseq eMMC MMC host: - alcor: Work with multiple-entry sglists - alcor: Enable DMA for writes - meson-gx: Improve tuning support - meson-gx: Avoid clock glitch when switching to DDR modes - meson-gx: Disable unreliable HS400 mode - mmci: Minor updates for support of HW busy detection - mmci: Support data transfers for the stm32_sdmmc variant - mmci: Restructure code to better support different variants - mtk-sd: Add support for version found on MT7620 family SOCs - mtk-sd: Add support for the MT8516 version - mtk-sd: Add Chaotian Jing as the maintainer - sdhci: Reorganize request-code to convert from tasklet to workqueue - sdhci_am654: Stabilize support for lower speed modes - sdhci-esdhc-imx: Add HS400 support for iMX7ULP - sdhci-esdhc-imx: Add support for iMX7ULP version - sdhci-of-arasan: Allow to disable DCMDs via DT for CQE - sdhci-of-esdhc: Add support for the ls1028a version - sdhci-of-esdhc: Several fixups for errata - sdhci-pci: Fix BYT OCP setting - sdhci-pci: Add support for Intel CML - sdhci-tegra: Add support for system suspend/resume - sdhci-tegra: Add CQE support for Tegra186 WAR - sdhci-tegra: Add support for Tegra194 - sdhci-tegra: Update HW tuning process MEMSTICK: - I volunteered to help as a maintainer for the memstick subsystem, which is reflected by an update to the MAINTAINERS file. Changes are funneled through my MMC git and we will use the linux-mmc mailing list. MEMSTICK host: - A few minor cleanups" * tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (87 commits) mmc: sdhci-pci: Fix BYT OCP setting dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host mmc: mtk-sd: select REGULATOR mmc: mtk-sd: enable internal card-detect logic. mmc: mtk-sd: add support for config found in mt7620 family SOCs. mmc: mtk-sd: don't hard-code interrupt trigger type mmc: core: Fix tag set memory leak dt-bindings: mmc: Add support for MT8516 to mtk-sd mmc: mmci: Prevent polling for busy detection in IRQ context mmc: mmci: Cleanup mmci_cmd_irq() for busy detect mmc: usdhi6rol0: mark expected switch fall-throughs mmc: core: Verify SD bus width mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidle dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string mmc: meson-gx: add signal resampling tuning mmc: meson-gx: remove Rx phase tuning mmc: meson-gx: avoid clock glitch when switching to DDR modes mmc: meson-gx: disable HS400 ...
2019-05-07Merge tag 'Wimplicit-fallthrough-5.2-rc1' of ↵Linus Torvalds2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva: "Mark switch cases where we are expecting to fall through. This is part of the ongoing efforts to enable -Wimplicit-fallthrough. Most of them have been baking in linux-next for a whole development cycle. And with Stephen Rothwell's help, we've had linux-next nag-emails going out for newly introduced code that triggers -Wimplicit-fallthrough to avoid gaining more of these cases while we work to remove the ones that are already present. We are getting close to completing this work. Currently, there are only 32 of 2311 of these cases left to be addressed in linux-next. I'm auditing every case; I take a look into the code and analyze it in order to determine if I'm dealing with an actual bug or a false positive, as explained here: https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/ While working on this, I've found and fixed the several missing break/return bugs, some of them introduced more than 5 years ago. Once this work is finished, we'll be able to universally enable "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from entering the kernel again" * tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits) memstick: mark expected switch fall-throughs drm/nouveau/nvkm: mark expected switch fall-throughs NFC: st21nfca: Fix fall-through warnings NFC: pn533: mark expected switch fall-throughs block: Mark expected switch fall-throughs ASN.1: mark expected switch fall-through lib/cmdline.c: mark expected switch fall-throughs lib: zstd: Mark expected switch fall-throughs scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs scsi: ppa: mark expected switch fall-through scsi: osst: mark expected switch fall-throughs scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs scsi: lpfc: lpfc_nvme: Mark expected switch fall-through scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs scsi: lpfc: lpfc_els: Mark expected switch fall-throughs scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs scsi: imm: mark expected switch fall-throughs scsi: csiostor: csio_wr: mark expected switch fall-through ...
2019-05-06memstick: tifm: remove set but not used variable 'data'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/memstick/host/tifm_ms.c: In function 'tifm_ms_issue_cmd': drivers/memstick/host/tifm_ms.c:259:17: warning: variable 'data' set but not used [-Wunused-but-set-variable] It's not used any more since commit 92b22d935fed ("tifm: fix the MemoryStick host fifo handling code") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-23memstick: mark expected switch fall-throughsGustavo A. R. Silva2-0/+4
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/memstick/host/jmb38x_ms.c: In function ‘jmb38x_ms_write_data’: drivers/memstick/host/jmb38x_ms.c:261:15: warning: this statement may fall through [-Wimplicit-fallthrough=] host->io_pos++; ~~~~~~~~~~~~^~ drivers/memstick/host/jmb38x_ms.c:262:2: note: here case 2: ^~~~ drivers/memstick/host/jmb38x_ms.c:264:15: warning: this statement may fall through [-Wimplicit-fallthrough=] host->io_pos++; ~~~~~~~~~~~~^~ drivers/memstick/host/jmb38x_ms.c:265:2: note: here case 1: ^~~~ drivers/memstick/host/tifm_ms.c: In function ‘tifm_ms_write_data’: drivers/memstick/host/tifm_ms.c:168:15: warning: this statement may fall through [-Wimplicit-fallthrough=] host->io_pos++; ~~~~~~~~~~~~^~ drivers/memstick/host/tifm_ms.c:169:2: note: here case 2: ^~~~ drivers/memstick/host/tifm_ms.c:171:15: warning: this statement may fall through [-Wimplicit-fallthrough=] host->io_pos++; ~~~~~~~~~~~~^~ drivers/memstick/host/tifm_ms.c:172:2: note: here case 1: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-04-15memstick: jmb38x_ms: remove set but not used variable 'data'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/memstick/host/jmb38x_ms.c: In function 'jmb38x_ms_issue_cmd': drivers/memstick/host/jmb38x_ms.c:371:17: warning: variable 'data' set but not used [-Wunused-but-set-variable] It's never used since introduction and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon1-4/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-17memstick: rtsx_usb_ms: Support runtime power managementKai-Heng Feng1-63/+100
In order to let host's parent device, rtsx_usb, to use USB remote wake up signaling to do card detection, it needs to be suspended. Hence it's necessary to add runtime PM support for the memstick host. To keep memstick host stays suspended when it's not in use, convert the card detection function from kthread to delayed_work, which can be scheduled when the host is resumed and can be canceled when the host is suspended. Put the device to suspend when there's no card and the power mode is MEMSTICK_POWER_OFF. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17memstick: rtsx_usb_ms: Use ms_dev() helperKai-Heng Feng1-3/+3
Use ms_dev() helper for consistency. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17memstick: rtsx_usb_ms: Add missing pm_runtime_disable() in probe functionKai-Heng Feng1-0/+1
If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for rtsx_usb_ms. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-29misc: rtsx: Move Realtek Card Reader Driver to miscRui Feng3-4/+4
Because Realtek card reader drivers are pcie and usb drivers, and they bridge mmc subsystem and memstick subsystem, they are not mfd drivers. Greg and Lee Jones had a discussion about where to put the drivers, the result is that misc is a good place for them, so I move all files to misc. If I don't move them to a right place, I can't add any patch for this driver. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Perry Yuan <perry_yuan@dell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds3-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-02drivers/memstick: Convert timers to use timer_setup()Kees Cook3-11/+12
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-17memstick: rtsx_usb_ms: Manage runtime PM when accessing the deviceUlf Hansson1-0/+4
Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. This is currently not the case and it could trigger various errors. Fix this by properly deal with runtime PM in this regards. This means making sure the device is runtime resumed, when serving requests via the ->request() callback or changing settings via the ->set_param() callbacks. Cc: <stable@vger.kernel.org> Cc: Ritesh Raj Sarraf <rrs@researchut.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-10-17memstick: rtsx_usb_ms: Runtime resume the device when polling for cardsAlan Stern1-0/+2
Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. Therefore when the rtsx_usb_ms driver polls for inserted memstick cards, let's add pm_runtime_get|put*() to make sure accesses is done when the rtsx usb device is runtime resumed. Reported-by: Ritesh Raj Sarraf <rrs@researchut.com> Tested-by: Ritesh Raj Sarraf <rrs@researchut.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-23rtsx_usb_ms: use schedule_timeout_idle() in polling loopOleksandr Natalenko1-1/+1
First version of this patch has already been posted to LKML by Ben Hutchings ~6 months ago, but no further action were performed. Ben's original message: : rtsx_usb_ms creates a task that mostly sleeps, but tasks in : uninterruptible sleep still contribute to the load average (for : bug-compatibility with Unix). A load average of ~1 on a system that : should be idle is somewhat alarming. : : Change the sleep to be interruptible, but still ignore signals. References: https://bugs.debian.org/765717 Link: http://lkml.kernel.org/r/b49f95ae83057efa5d96f532803cba47@natalenko.name Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Lee Jones <lee.jones@linaro.org> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Roger Tseng <rogerable@realtek.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25drivers/memstick/host/r592.c: avoid gcc-6 warningArnd Bergmann1-2/+1
The r592 driver relies on behavior of the DMA mapping API that is normally observed but not guaranteed by the API. Instead it uses a runtime check to fail transfers if the API ever behaves When CONFIG_NEED_SG_DMA_LENGTH is not set, one of the checks turns into a comparison of a variable with itself, which gcc-6.0 now warns about: drivers/memstick/host/r592.c: In function 'r592_transfer_fifo_dma': drivers/memstick/host/r592.c:302:31: error: self-comparison always evaluates to false [-Werror=tautological-compare] (sg_dma_len(&dev->req->sg) < dev->req->sg.length)) { ^ The check itself is not a problem, so this patch just rephrases the condition in a way that gcc does not consider an indication of a mistake. We already know that dev->req->sg.length was initially R592_LFIFO_SIZE, so we can compare it to that constant again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30memstick: remove deprecated use of pci apiQuentin Lambert2-11/+11
Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-20memstick: host: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-14memstick: r592: fix build warnings for !PM_SLEEPThierry Reding1-0/+2
When PM_SLEEP is not enabled, the r592_clear_interrupts() function is never used. If so, don't build it to prevent a compiler warning. Signed-off-by: Thierry Reding <treding@nvidia.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23drivers/memstick/host/rtsx_pci_ms.c: add cancel_work when remove driverMicky Ching1-0/+1
Add cancel_work_sync() in rtsx_pci_ms_drv_remove() to cancel pending request work when removing the driver. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Cc: Samuel Ortiz <sameo@linux.intel.com> says: Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: Roger Tseng <rogerable@realtek.com> Cc: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-28memstick: Add realtek USB memstick host driverRoger Tseng3-0/+850
Realtek USB memstick host driver provides memstick host support based on the Realtek USB card reader MFD driver. Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-23drivers/memstick/host/rtsx_pci_ms.c: fix ms card data transfer bugMicky Ching1-10/+20
This patch is used to add support for ms card. The main difference between ms card and mspro card is long data transfer mode. mspro card can use auto mode DMA for long data transfer, but ms can not use this mode, it should use normal mode DMA. The memstick core added support for ms card, but the original driver will make ms card fail at initialization, because it uses auto mode DMA. This patch makes the ms card work properly. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang1-1/+1
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11drivers/memstick/host/rtsx_pci_ms.c: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-30mmc: memstick: rtsx: Modify copyright commentsWei WANG1-2/+1
Update copyright date, and remove author address. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-03drivers/memstick/host/r592.c: convert to module_pci_driverLibo Chen1-12/+1
Signed-off-by: Libo Chen <libo.chen@huawei.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/memstick/host/jmb38x_ms: convert to module_pci_driverLibo Chen1-12/+1
Use module_pci_driver instead of init/exit, make code clean. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30drivers/memstick/host/r592.c: make r592_pm_ops staticJingoo Han1-5/+3
r592_pm_ops is not exported. Also, CONFIG_PM_SLEEP is used to remove unnecessary ifdefs. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27memstick: move the dereference below the NULL testWei Yongjun1-1/+2
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24Merge tag 'mfd-3.9-1' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
2013-02-14mfd: rtsx: Fix issue that booting OS with SD card insertedWei WANG1-0/+7
Realtek card reader supports both SD and MS card. According to the settings of rtsx MFD driver, SD host will be probed before MS host. If we boot/reboot Linux with SD card inserted, the resetting flow of SD card will succeed, and the following resetting flow of MS is sure to fail. Then MS upper-level driver will ask rtsx driver to turn power off. This request leads to the result that the following SD commands fail and SD card can't be accessed again. In this commit, Realtek's SD and MS host driver will check whether the card that upper driver requesting is the one existing in the slot. If not, Realtek's host driver will refuse the operation to make sure the exlusive accessing at the same time. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-21drivers/memstick/host: remove depends on CONFIG_EXPERIMENTALKees Cook1-6/+6
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15drivers/memstick: Add realtek pcie memstick host driverWei WANG3-0/+652
Realtek PCI-E Memstick card host driver is used to access Memstick card, with the help of Realtek PCI-E card reader MFD driver. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-20memstick: remove the second argument of k[un]map_atomic()Cong Wang2-4/+4
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell3-3/+3
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-10-31drivers/memstick: Add module.h to the prev. implicit modular usersPaul Gortmaker2-0/+2
This is another group of drivers that simply assumed that module.h was everywhere. But it won't be once we clean up its presence from device.h Call out the real users of it in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-31Fix common misspellingsLucas De Marchi2-4/+4
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-28memstick: make enable_dma less generic in r592Stephen Rothwell1-3/+3
Fixes this build error: drivers/memstick/host/r592.c:26: error: 'enable_dma' redeclared as different kind of symbol arch/powerpc/include/asm/dma.h:189: note: previous definition of 'enable_dma' was here Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Alex Dubov <oakad@yahoo.com> Acked-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>