summaryrefslogtreecommitdiffstats
path: root/drivers/memory/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2015-03-26memory: jz4780-nemc: driver for the NEMC on JZ4780 SoCsAlex Smith1-0/+1
Add a driver for the NAND/External Memory Controller (NEMC) on JZ4780 and later SoCs. The primary function of this driver is to configure parameters, such as timings, for external memory devices using data supplied in the device tree. Devices connected to the NEMC are represented in the DT as children of the NEMC node, the driver uses optional properties specified in these child nodes to configure the parameters of each bank. Signed-off-by: Alex Smith <alex@alex-smith.me.uk> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-09Merge tag 'omap-gpmc-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC/OMAP GPMC driver cleanup and move from Arnd Bergmann: "The GPMC driver has traditionally been considered a part of the OMAP platform code and tightly interweaved with some of the boards. With this cleanup, it has finally come to the point where it makes sense to move it out of arch/arm into drivers/memory, where we already have other drivers for similar hardware. The cleanups are still ongoing, with the goal of eventually having a standalone driver that does not require an interface to architecture code. This is a separate branch because of dependencies on multiple other branches, and to keep the drivers changes separate from the normal cleanups" * tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: gpmc: Move omap gpmc code to live under drivers ARM: OMAP2+: Move GPMC initcall to devices.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header ARM: OMAP2+: Remove unnecesary include in GPMC driver ARM: OMAP2+: Drop board file for 3430sdp ARM: OMAP2+: Drop board file for ti8168evm ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c ARM: OMAP2+: Require proper GPMC timings for devices ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child() ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg()
2014-12-04memory: Add NVIDIA Tegra memory controller supportThierry Reding1-1/+2
The memory controller on NVIDIA Tegra exposes various knobs that can be used to tune the behaviour of the clients attached to it. Currently this driver sets up the latency allowance registers to the HW defaults. Eventually an API should be exported by this driver (via a custom API or a generic subsystem) to allow clients to register latency requirements. This driver also registers an IOMMU (SMMU) that's implemented by the memory controller. It is supported on Tegra30, Tegra114 and Tegra124 currently. Tegra20 has a GART instead. The Tegra SMMU operates on memory clients and SWGROUPs. A memory client is a unidirectional, special-purpose DMA master. A SWGROUP represents a set of memory clients that form a logical functional unit corresponding to a single device. Typically a device has two clients: one client for read transactions and one client for write transactions, but there are also devices that have only read clients, but many of them (such as the display controllers). Because there is no 1:1 relationship between memory clients and devices the driver keeps a table of memory clients and the SWGROUPs that they belong to per SoC. Note that this is an exception and due to the fact that the SMMU is tightly integrated with the rest of the Tegra SoC. The use of these tables is discouraged in drivers for generic IOMMU devices such as the ARM SMMU because the same IOMMU could be used in any number of SoCs and keeping such tables for each SoC would not scale. Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-28memory: gpmc: Move omap gpmc code to live under driversTony Lindgren1-0/+1
Just move to drivers as further clean-up can now happen there finally. Let's also add Roger and me to the MAINTAINERS so we get notified for any patches related to GPMC. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-25Merge tag 'at91-drivers-for-3.17' of ↵Nicolas Ferre1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux Pull AT91 reset, poweroff and ram drivers from Maxime Ripard: "This tag holds the various new drivers introduced to move code that used to be in mach-at91 over to the proper frameworks. These files are the reboot and poweroff code for all AT91 SoCs but the RM9200, and the ram controller driver is not doing much at the time, except for grabing the RAM clock in order to leave it always enabled." Conflicts: arch/arm/mach-at91/Kconfig
2014-07-29memory: Freescale CoreNet Coherency Fabric error reporting driverScott Wood1-0/+1
The CoreNet Coherency Fabric is part of the memory subsystem on some Freescale QorIQ chips. It can report coherency violations (e.g. due to misusing memory that is mapped noncoherent) as well as transactions that do not hit any local access window, or which hit a local access window with an invalid target ID. Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Bharat Bhushan <bharat.bhushan@freescale.com>
2014-07-15memory: add a driver for atmel ram controllersAlexandre Belloni1-0/+1
Atmel SoCs have one or multiple RAM controllers that need one or multiple clocks to run. This driver handle those clocks. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-02-28memory: ti-aemif: introduce AEMIF driverIvan Khoronzhuk1-0/+1
Add new AEMIF driver for EMIF16 Texas Instruments controller. The EMIF16 module is intended to provide a glue-less interface to a variety of asynchronous memory devices like ASRA M, NOR and NAND memory. A total of 256M bytes of any of these memories can be accessed at any given time via 4 chip selects with 64M byte access per chip select. Synchronous memories such as DDR1 SD RAM, SDR SDRAM and Mobile SDR are not supported. This controller is used on SoCs like Davinci, Keysone2 Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18driver/memory:Move Freescale IFC driver to a common driverPrabhakar Kushwaha1-0/+1
Freescale IFC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the driver to driver/memory and fix the header file includes. Also remove module_platform_driver() and instead call platform_driver_register() from subsys_initcall() to make sure this module has been loaded before MTD partition parsing starts. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-21drivers: memory: Introduce Marvell EBU Device Bus driverEzequiel Garcia1-0/+1
Marvell EBU SoCs such as Armada 370/XP, Orion5x (88f5xxx) and Discovery (mv78xx0) supports a Device Bus controller to access several kinds of memories and I/O devices (NOR, NAND, SRAM, FPGA). This commit adds a driver to handle this controller. So far only Armada 370, Armada XP and Discovery SoCs are supported. The driver must be registered through a device tree node; as explained in the binding document. For each child node in the device tree, this driver will: * set timing parameters * register a child device * setup an address decoding window, using the mbus driver Keep in mind the address decoding window setup is only a temporary hack. This code will be removed from this devbus driver as soon as a proper device tree binding for the mbus driver is added. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05memory: fix build when CONFIG_OF && !CONFIG_DDRStephen Warren1-0/+2
Commit e6b42eb "memory: emif: add device tree support to emif driver" added drivers/memory/of_memory.c, which references tables defined in lib/jedec_ddr_data.c. of_memory.c is compiled when CONFIG_OF, whereas jedec_ddr_data.c is compiled when CONFIG_DDR. This breaks the build when CONFIG_OF is defined but not CONFIG_DDR: drivers/built-in.o: In function `of_get_ddr_timings': drivers/memory/of_memory.c:138: undefined reference to `lpddr2_jedec_timings' drivers/built-in.o: In function `of_get_min_tck': drivers/memory/of_memory.c:62: undefined reference to `lpddr2_jedec_min_tck' make: *** [vmlinux] Error 1 To solve this, only compile of_memory.c when CONFIG_OF && CONFIG_DDR, otherwise, stub out the functions. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-04memory: emif: add device tree support to emif driverAneesh V1-0/+1
Device tree support for the EMIF driver. LPDDR2 generic timings extraction from device is managed using couple of helper functions which can be used by other memory controller drivers. Reviewed-by: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10ARM: tegra30: Add Tegra Memory Controller(MC) driverHiroshi DOYU1-0/+1
Tegra Memory Controller(MC) driver for Tegra30 Added to support MC General interrupts, mainly for IOMMU(SMMU). Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10ARM: tegra20: Add Tegra Memory Controller(MC) driverHiroshi DOYU1-0/+1
Tegra Memory Controller(MC) driver for Tegra20 Added to support MC General interrupts, mainly for IOMMU(GART). Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02memory: emif: add basic infrastructure for EMIF driverAneesh V1-0/+5
EMIF is an SDRAM controller used in various Texas Instruments SoCs. EMIF supports, based on its revision, one or more of LPDDR2/DDR2/DDR3 protocols. Add the basic infrastructure for EMIF driver that includes driver registration, probe, parsing of platform data etc. Signed-off-by: Aneesh V <aneesh@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Benoit Cousson <b-cousson@ti.com> [santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>