summaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2010-09-30V4L/DVB: v4l: radio: si470x: fix unneeded free_irq() callMarek Szyprowski1-1/+1
In case of error during probe() the driver calls free_irq() function on not yet allocated irq. This patches fixes the call sequence in case of the error. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-30V4L/DVB: v4l: videobuf: prevent passing a NULL to dma_free_coherent()Pawel Osciak1-2/+4
When a driver that uses videobuf-dma-contig is used with the USERPTR memory access method a kernel oops might happen: a NULL address may be passed to dma_free_coherent(). This happens when an application calls REQBUFS and then exits without queuing any buffers. This patch fixes that bug. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-30V4L/DVB: ir-core: Fix null dereferences in the protocols sysfs interfaceBrian Rogers1-6/+11
For some cards, ir_dev->props and ir_dev->raw are both NULL. These cards are using built-in IR decoding instead of raw, and can't easily be made to switch protocols. So upon reading /sys/class/rc/rc?/protocols on such a card, return 'builtin' as the supported and enabled protocol. Return -EINVAL on any attempts to change the protocol. And most important of all, don't crash. Signed-off-by: Brian Rogers <brian@xyzw.org> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: v4l: s5p-fimc: Fix 3-planar formats handling and pixel offset error ↵Sylwester Nawrocki1-50/+37
on S5PV210 SoCs Fix DMA engine pixel offset calculation for 3-planar YUV formats. On S5PV210 SoCs horizontal offset is applied as number of pixels, not bytes per line. [mchehab@redhat.com: CodingStyle cleanup] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: v4l: s5p-fimc: Fix return value on probe() failurePawel Osciak1-1/+3
On failed create_workqueue() fimc_probe() was returning 0. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: uvcvideo: Restrict frame rates for Chicony CNF7129 webcamLaurent Pinchart2-0/+16
At all frame rates except 30fps and 5fps the camera produces very dark pictures. Auto-exposure is probably disabled by the camera at all frame rates except 30fps, making them pretty unusable. Work around the problem by introducing a new RESTRICT_FRAME_RATE quirk that disables all the frame rates except the default one. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: uvcvideo: Fix support for Medion Akoya All-in-one PC integrated webcamLaurent Pinchart1-0/+9
The camera requires the STREAM_NO_FID quirk. Add a corresponding entry in the device IDs list. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: ivtvfb: prevent reading uninitialized stack memoryDan Rosenberg1-0/+2
The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16 bytes of uninitialized stack memory, because the "reserved" member of the fb_vblank struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: cx25840: Fix typo in volume control initialization: 65335 vs. 65535Andy Walls1-1/+1
The wrong value for the volume control limit, 65335 vs. 65535, prevents proper cx25840 v4l2_subdevice initialization. Reported-by: Igor M. liplianin <liplianin@me.by> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: v4l: mem2mem_testdev: add missing release for video_devicePawel Osciak1-0/+1
Video device was not being released on driver remove. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: v4l: mem2mem_testdev: fix errorenous comparisonPawel Osciak1-1/+1
Output buffer has to be at least the size of input buffer, not the other way around. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: mt9v022.c: Fixed compilation warningIonut Gabriel Popescu1-3/+0
The drivers/media/video/mt9v022.c file, on line 405, tries a "case 0" o a v4l2_mbus_pixelcode enum which don't have an 0 value element, so I got a compile warning. That "case" is useless so it can be removed. Signed-off-by: Ionut Gabriel Popescu <poyo_vl@yahoo.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: mt9m111: added current colorspace at g_fmtMichael Grzeschik1-0/+1
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: mt9m111: cropcap and s_crop check if type is VIDEO_CAPTUREMichael Grzeschik1-1/+6
Signed-off-by: Philipp Wiesner <p.wiesner@phytec.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: mx2_camera: fix a race causing NULL dereferenceBaruch Siach1-0/+4
The mx25_camera_irq irq handler may get called after the camera has been deactivated (from mx2_camera_deactivate). Detect this situation, and bail out. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: gspca - sn9c20x: Bad transfer size of Bayer imagesJean-François Moine1-2/+1
As the end of frame marker does not contain any pixel, it must not be transferred. Reported-by: Ivo Jager <ivo.jager@siliconfields.net> Signed-off-by: Jean-François Moine <moinejf@free.fr> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: videobuf-dma-sg: set correct size in last sg elementHans Verkuil1-4/+7
This fixes a nasty memory corruption bug when using userptr I/O. The function videobuf_pages_to_sg() sets up the scatter-gather list for the DMA transfer to the userspace pages. The first transfer is setup correctly (the size is set to PAGE_SIZE - offset), but all other transfers have size PAGE_SIZE. This is wrong for the last transfer which may be less than PAGE_SIZE. Most, if not all, drivers will program the boards DMA engine correctly, i.e. even though the size in the last sg element is wrong, they will do their own size calculations and make sure the right amount is DMA-ed, and so seemingly prevent memory corruption. However, behind the scenes the dynamic DMA mapping support (in lib/swiotlb.c) may create bounce buffers if the memory pages are not in DMA-able memory. This happens for example on a 64-bit linux with a board that only supports 32-bit DMA. These bounce buffers DO use the information in the sg list to determine the size. So while the DMA engine transfers the correct amount of data, when the data is 'bounced' back too much is copied, causing buffer overwrites. The fix is simple: calculate and set the correct size for the last sg list element. Signed-off-by: Hans Verkuil <hans.verkuil@tandberg.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: cx231xx: Avoid an OOPS when card is unknown (card=0)Mauro Carvalho Chehab1-6/+8
As reported by: Carlos Americo Domiciano <c_domiciano@yahoo.com.br>: [ 220.033500] cx231xx v4l2 driver loaded. [ 220.033571] cx231xx #0: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 6 interfaces [ 220.033577] cx231xx #0: registering interface 0 [ 220.033591] cx231xx #0: registering interface 1 [ 220.033654] cx231xx #0: registering interface 6 [ 220.033910] cx231xx #0: Identified as Unknown CX231xx video grabber (card=0) [ 220.033946] BUG: unable to handle kernel NULL pointer dereference at (null) [ 220.033955] IP: [<ffffffffa0d3c8bd>] cx231xx_pre_card_setup+0x5d/0xb0 [cx231xx] Thanks-to: Carlos Americo Domiciano <c_domiciano@yahoo.com.br> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: dvb: fix smscore_getbuffer() logicRichard Zidlicky1-19/+12
Drivers shouldn't sleep while holding a spinlock. A previous workaround were to release the spinlock before callinc schedule(). This patch uses a different approach: it just waits for the siano hardware to answer. Signed-off-by: Richard Zidlicky <rz@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: dib7000p: add disable sample and hold, and diversity delay parameterOlivier Grenie3-1/+8
This patch improves the overall driver performance in diversity-reception scenarios. Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: dib7770: enable the current mirrorOlivier Grenie3-1/+57
To improve performance on DiB7770-devices enabling the current mirror is needed. This patch adds an option to the dib7000p-driver to do that and it creates a separate device-entry in dib0700-device to use those changes on hardware which is using the DiB7770. Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: IR: extend MCE keymapMaxim Levitsky1-0/+3
These keys are found on remote bundled with Toshiba Qosmio F50-10q. Found and tested by, Sami R <maesesami@gmail.com> Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: IR: fix keys beeing stuck down foreverMaxim Levitsky1-1/+1
The logic in ir_timer_keyup was inverted. In case that values aren't equal, the meaning of the time_is_after_eq_jiffies(ir->keyup_jiffies) is that ir->keyup_jiffies is after the the jiffies or equally that that jiffies are before the the ir->keyup_jiffies which is exactly the situation we want to avoid (that the timeout is in the future) Confusing Eh? Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: IR: fix duty cycle capabilityMaxim Levitsky1-1/+1
Due to typo lirc bridge enabled wrong capability. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: rc-core: increase repeat timeMauro Carvalho Chehab2-3/+7
As reported by Anton Blanchard <anton@samba.org>, double IR events on 2.6.36-rc2 and a DViCO FusionHDTV DVB-T Dual Express are happening: [ 1351.032084] ir_keydown: i2c IR (FusionHDTV): key down event, key 0x0067, scancode 0x0051 [ 1351.281284] ir_keyup: keyup key 0x0067 ie one key down event and one key up event 250ms later. So, we need to increase the repeat timeout, to avoid this bug to hit. As we're doing it at core, this fix is not needed anymore at dib0700 driver. Thanks-to: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: Don't identify PV SBTVD Hybrid as a DibCom deviceMauro Carvalho Chehab3-1/+5
As reported by Carlos, Prolink Pixelview SBTVD Hybrid is based on Conexant cx231xx + Fujitsu 86A20S demodulator. However, both shares the same USB ID. So, we need to use USB bcdDevice, in order to properly discover what's the board. We know for sure that bcd 0x100 is used for a dib0700 device, while bcd 0x4001 is used for a cx23102 device. This patch reserves two ranges, the first one from 0x0000-0x3f00 for dib0700, and the second from 0x4000-0x4fff for cx231xx devices. This may need fixes in the future, as we get access to other devices. Thanks-to: Carlos Americo Domiciano <c_domiciano@yahoo.com.br> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: mceusb: add two new ASUS device IDsJarod Wilson1-0/+4
Reported in lirc sf.net tracker and on lirc mailing list Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: gspca - main: Fix a crash of some webcams on ARM archJason Wang1-0/+1
When plugging some webcams on ARM, the system crashes. This is because we alloc buffer for an urb through usb_buffer_alloc, the alloced buffer is already in DMA coherent region, so we should set the flag of this urb to URB_NO_TRANSFER_DMA_MAP, otherwise when we submit this urb, the hcd core will handle this address as an non-DMA address and call dma_map_single/sg to map it. On arm architecture, dma_map_single a DMA coherent address will be catched by a BUG_ON(). Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: Fix regression for BeholdTV ColumbusDmitri Belimov1-5/+5
Some time a go our customers wrote me about problem with our TV card BeholdTV Columbus. It's PCMCIA TV card for notebook. As I understand v4l has some regression with autodetect address of tuners. I can set incorrect I2C address and had report about detect tuner. No any TV of course. When I set correct tuner type and I2C address of the tuners all works well. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: saa7164: move dereference under NULL checkDan Carpenter1-2/+3
The original code dereferenced "port" before checking it for NULL. I moved the test down below the check. Also I changed the comparisons a little so people wouldn't get confused and think "port" and "buf" were ints instead of pointers. (Probably that's what lead to this issue in the first place.) There is only one caller for this function and it passes non-NULL pointers, so this is essentially a cleanup rather than a bugfix. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: pvrusb2: remove unneeded NULL checksDan Carpenter1-3/+3
We dereference "maskptr" unconditionally at the start of the function and also inside the call to parse_tlist() towards the end of the function. This function is called from store_val_any() and it always passes a non-NULL pointer. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: opera1: remove unneeded NULL checkDan Carpenter1-3/+1
"fw" is always a non-NULL pointer at this point, and anyway release_firmware() accepts NULL pointers. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: IR: ir-raw-event: null pointer dereferenceDan Carpenter1-1/+3
The original code dereferenced ir->raw after freeing it and setting it to NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: unlock on error pathDan Carpenter1-1/+2
If we return directly here then we miss out on some mutex_unlock()s Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: cx88: Kconfig: Remove EXPERIMENTAL dependency from VIDEO_CX88_ALSAlawrence rust1-1/+1
The cx88-alsa module has been around since January 2006 and has seen no significant changes since September 2007. It is stable in operation and so I believe that the 'experimental' tag is no longer warranted. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-24V4L/DVB: mantis: Fix IR_CORE dependencyIngo Molnar1-1/+1
This build bug triggers: drivers/built-in.o: In function `mantis_exit': (.text+0x377413): undefined reference to `ir_input_unregister' drivers/built-in.o: In function `mantis_input_init': (.text+0x3774ff): undefined reference to `__ir_input_register' If MANTIS_CORE is enabled but IR_CORE is not. Add the correct dependency. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14v4l: Remove reference to bkl ioctl in compat ioctl handlingFrederic Weisbecker1-6/+1
There are no more users of struct file_operations:ioctl. These can be safely removed. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Hans Verkuil <hverkuil@xs4all.nl>
2010-08-13Merge branch 'v4l_for_linus' of ↵Linus Torvalds15-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: v4l2-ctrls.c: needs to include slab.h V4L/DVB: fix Kconfig to depends on VIDEO_IR V4L/DVB: Fix IR_CORE dependencies
2010-08-12V4L/DVB: v4l2-ctrls.c: needs to include slab.hRandy Dunlap1-0/+1
v4l2-ctrls.c needs to include slab.h to prevent build errors: drivers/media/video/v4l2-ctrls.c:766: error: implicit declaration of function 'kzalloc' drivers/media/video/v4l2-ctrls.c:786: error: implicit declaration of function 'kfree' drivers/media/video/v4l2-ctrls.c:1528: error: implicit declaration of function 'kmalloc' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-12V4L/DVB: fix Kconfig to depends on VIDEO_IRMauro Carvalho Chehab10-10/+10
warning: (VIDEO_BT848 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT || VIDEO_SAA7134 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && VIDEO_DEV && PCI && I2C && INPUT || VIDEO_CX88 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && VIDEO_DEV && PCI && I2C && INPUT || VIDEO_IVTV && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && PCI && I2C && INPUT || VIDEO_CX18 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL && INPUT || VIDEO_EM28XX && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT || VIDEO_TLG2300 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT && SND && DVB_CORE || VIDEO_CX231XX && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT || DVB_BUDGET_CI && MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && DVB_BUDGET_CORE && I2C && INPUT || DVB_DM1105 && MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && PCI && I2C && INPUT || VIDEO_GO7007 && STAGING && !STAGING_EXCLUDE_BUILD && VIDEO_DEV && PCI && I2C && INPUT && SND || VIDEO_CX25821 && STAGING && !STAGING_EXCLUDE_BUILD && DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT) selects VIDEO_IR which has unmet direct dependencies (IR_CORE) Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-12V4L/DVB: Fix IR_CORE dependenciesMauro Carvalho Chehab4-4/+11
As pointed by Randy Dunlap <randy.dunlap@oracle.com>: > ERROR: "ir_keydown" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_repeat" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_keydown" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "ir_g_keycode_from_table" [drivers/media/IR/ir-common.ko] undefined! > > > #5101: > (.text+0x8306e2): undefined reference to `ir_core_debug' > (.text+0x830729): undefined reference to `ir_core_debug' > ir-functions.c:(.text+0x830906): undefined reference to `ir_core_debug' > (.text+0x8309d8): undefined reference to `ir_g_keycode_from_table' > (.text+0x830acf): undefined reference to `ir_core_debug' > (.text+0x830b92): undefined reference to `ir_core_debug' > (.text+0x830bef): undefined reference to `ir_core_debug' > (.text+0x830c6a): undefined reference to `ir_core_debug' > (.text+0x830cf7): undefined reference to `ir_core_debug' > budget-ci.c:(.text+0x89f5c8): undefined reference to `ir_keydown' > budget-ci.c:(.text+0x8a0c58): undefined reference to `get_rc_map' > budget-ci.c:(.text+0x8a0c80): undefined reference to `__ir_input_register' > budget-ci.c:(.text+0x8a0ee0): undefined reference to `get_rc_map' > budget-ci.c:(.text+0x8a11cd): undefined reference to `ir_input_unregister' > (.text+0x8a8adb): undefined reference to `ir_input_unregister' > dvb-usb-remote.c:(.text+0x8a9188): undefined reference to `get_rc_map' > dvb-usb-remote.c:(.text+0x8a91b1): undefined reference to `__ir_input_register' > dvb-usb-remote.c:(.text+0x8a9238): undefined reference to `get_rc_map' > dib0700_core.c:(.text+0x8b04ca): undefined reference to `ir_keydown' > dib0700_devices.c:(.text+0x8b2ea8): undefined reference to `ir_keydown' > dib0700_devices.c:(.text+0x8b2ef0): undefined reference to `ir_keydown' Those breakages seem to be caused by two bad things at IR_CORE Kconfig: 1) cx23885 is using select for IR_CORE; 2) the dvb-usb and sms dependency for IR_CORE were missing. While here, allow users to un-select IR. Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-12Merge branch 'i2c-for-linus' of ↵Linus Torvalds7-34/+19
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: I2C bus multiplexer driver pca954x i2c: Multiplexed I2C bus core support i2c: Use a separate mutex for userspace client lists i2c: Make i2c_default_probe self-sufficient i2c: Drop dummy variable i2c: Move adapter locking helpers to i2c-core V4L/DVB: Use custom I2C probing function mechanism i2c: Add support for custom probe function i2c-dev: Use memdup_user i2c-dev: Remove unnecessary kmalloc casts
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-4/+4
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-11V4L/DVB: Use custom I2C probing function mechanismJean Delvare2-26/+8
Now that i2c-core offers the possibility to provide custom probing function for I2C devices, let's make use of it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-11i2c: Add support for custom probe functionJean Delvare5-8/+11
The probe method used by i2c_new_probed_device() may not be suitable for all cases. Let the caller provide its own, optional probe function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-10Merge branch 'v4l_for_linus' of ↵Linus Torvalds89-3531/+11955
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (94 commits) V4L/DVB: tvp7002: fix write to H-PLL Feedback Divider LSB register V4L/DVB: dvb: siano: free spinlock before schedule() V4L/DVB: media: video: pvrusb2: remove custom hex_to_bin() V4L/DVB: drivers: usbvideo: remove custom implementation of hex_to_bin() V4L/DVB: Report supported QAM modes on bt8xx V4L/DVB: media: ir-keytable: null dereference in debug code V4L/DVB: ivtv: convert to the new control framework V4L/DVB: ivtv: convert gpio subdev to new control framework V4L/DVB: wm8739: convert to the new control framework V4L/DVB: cs53l32a: convert to new control framework V4L/DVB: wm8775: convert to the new control framework V4L/DVB: cx2341x: convert to the control framework V4L/DVB: cx25840: convert to the new control framework V4L/DVB: cx25840/ivtv: replace ugly priv control with s_config V4L/DVB: saa717x: convert to the new control framework V4L/DVB: msp3400: convert to the new control framework V4L/DVB: saa7115: convert to the new control framework V4L/DVB: v4l2: hook up the new control framework into the core framework V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API V4L/DVB: v4l2-ctrls: Whitespace cleanups ...
2010-08-08V4L/DVB: tvp7002: fix write to H-PLL Feedback Divider LSB registerRajashekhara, Sudhakar1-5/+5
H-PLL Feedback Divider LSB register is an 8 bit register out of which the first 4 bits are reserved. Current code is writing to these reserved location. This patch corrects this issue by left shifting the values being written to the register by 4. This patch has been tested on DM6467 EVM with 720P-60 and 1080I-60 inputs. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: dvb: siano: free spinlock before schedule()Kulikov Vasiliy1-2/+4
Calling schedule() holding spinlock with disables irqs is improper. As spinlock protects list coredev->buffers, it can be unlocked untill wakeup. This bug was introduced in a9349315f65cd6a16e8fab1f6cf0fd40f379c4db. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: media: video: pvrusb2: remove custom hex_to_bin()Andy Shevchenko1-12/+2
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: drivers: usbvideo: remove custom implementation of hex_to_bin()Andy Shevchenko1-8/+4
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 09:59:13 +0000