summaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2022-10-25media: vivid: set num_in/outputs to 0 if not supportedHans Verkuil1-4/+12
If node_types does not have video/vbi/meta inputs or outputs, then set num_inputs/num_outputs to 0 instead of 1. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 0c90f649d2f5 (media: vivid: add vivid_create_queue() helper) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: drop GFP_DMA32Hans Verkuil1-1/+1
>From what I can see, this is not needed. And since using it issues a 'deprecated' warning, just drop it. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: fix control handler mutex deadlockHans Verkuil1-0/+8
vivid_update_format_cap() can be called from an s_ctrl callback. In that case (keep_controls == true) no control framework functions can be called that take the control handler mutex. The new call to v4l2_ctrl_modify_dimensions() did exactly that. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 6bc7643d1b9c (media: vivid: add pixel_array test control) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: v4l2-dv-timings: add sanity checks for blanking valuesHans Verkuil1-0/+14
Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided blanking values are reasonable. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: dev->bitmap_cap wasn't freed in all casesHans Verkuil1-5/+13
Whenever the compose width/height values change, the dev->bitmap_cap vmalloc'ed array must be freed and dev->bitmap_cap set to NULL. This was done in some places, but not all. This is only an issue if overlay support is enabled and the bitmap clipping is used. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: s_fbuf: add more sanity checksHans Verkuil3-1/+32
VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root can use it. But at least check if the framebuffer parameters match that of one of the framebuffer created by vivid, and reject anything else. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-22Merge tag 'media/v6.1-2' of ↵Linus Torvalds81-1206/+2282
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld1-2/+2
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld2-3/+3
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-10Merge tag 'sched-core-2022-10-07' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Debuggability: - Change most occurances of BUG_ON() to WARN_ON_ONCE() - Reorganize & fix TASK_ state comparisons, turn it into a bitmap - Update/fix misc scheduler debugging facilities Load-balancing & regular scheduling: - Improve the behavior of the scheduler in presence of lot of SCHED_IDLE tasks - in particular they should not impact other scheduling classes. - Optimize task load tracking, cleanups & fixes - Clean up & simplify misc load-balancing code Freezer: - Rewrite the core freezer to behave better wrt thawing and be simpler in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting all the fallout. Deadline scheduler: - Fix the DL capacity-aware code - Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period() - Relax/optimize locking in task_non_contending() Cleanups: - Factor out the update_current_exec_runtime() helper - Various cleanups, simplifications" * tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) sched: Fix more TASK_state comparisons sched: Fix TASK_state comparisons sched/fair: Move call to list_last_entry() in detach_tasks sched/fair: Cleanup loop_max and loop_break sched/fair: Make sure to try to detach at least one movable task sched: Show PF_flag holes freezer,sched: Rewrite core freezer logic sched: Widen TAKS_state literals sched/wait: Add wait_event_state() sched/completion: Add wait_for_completion_state() sched: Add TASK_ANY for wait_task_inactive() sched: Change wait_task_inactive()s match_state freezer,umh: Clean up freezer/initrd interaction freezer: Have {,un}lock_system_sleep() save/restore flags sched: Rename task_running() to task_on_cpu() sched/fair: Cleanup for SIS_PROP sched/fair: Default to false in test_idle_cores() sched/fair: Remove useless check in select_idle_core() sched/fair: Avoid double search on same cpu sched/fair: Remove redundant check in select_idle_smt() ...
2022-10-07Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds6-451/+109
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
2022-10-07Merge tag 'media/v6.1-1' of ↵Linus Torvalds239-35903/+27504
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New driver for Mediatek MDP V3 - New driver for NXP i.MX DW100 dewarper - Zoran driver got promoted from staging - Hantro and related drivers got promoted from staging - Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu, meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci, zr364xx) - Usual set of driver fixes, improvements and cleanups * tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits) media: destage Hantro VPU driver media: platform: mtk-mdp3: add MediaTek MDP3 driver media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA media: dt-binding: mediatek: add bindings for MediaTek MDP3 components media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init media: xilinx: video: Add 1X12 greyscale format media: xilinx: csi2rxss: Add 1X12 greyscale format media: staging: media: imx: imx7-media-csi: Increase video mem limit media: uvcvideo: Limit power line control for Sonix Technology media: uvcvideo: Use entity get_cur in uvc_ctrl_set media: uvcvideo: Fix typo 'the the' in comment media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl() media: uvcvideo: Fix memory leak in uvc_gpio_parse media: renesas: vsp1: Add support for RZ/G2L VSPD media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit media: renesas: vsp1: Add support for VSP software version media: renesas: vsp1: Add support to deassert/assert reset line media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start() media: amphion: fix a bug that vpu core may not resume after suspend ...
2022-10-05Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+2
Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
2022-10-04Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds182-472/+182
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-01Merge tag 'media/v6.0-1' of ↵Linus Torvalds5-21/+29
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some fixes for the v4l2 ioctl handler logic - a fix for an out of bound access in the DVB videobuf2 handler - three driver fixes (rkvdec, mediatek/vcodek and uvcvideo) * tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: rkvdec: Disable H.264 error detection media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ) media: dvb_vb2: fix possible out of bound access media: v4l2-ioctl.c: fix incorrect error path media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args() media: uvcvideo: Fix InterfaceProtocol for Quanta camera
2022-09-27Merge branch 'master' into i2c/for-mergewindowWolfram Sang1-1/+1
2022-09-27Merge fixes into media_stageMauro Carvalho Chehab5-15/+31
* fixes: media: rkvdec: Disable H.264 error detection media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ) media: dvb_vb2: fix possible out of bound access media: v4l2-ioctl.c: fix incorrect error path media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args() media: uvcvideo: Fix InterfaceProtocol for Quanta camera
2022-09-27media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)Nícolas F. R. A. Prado1-6/+3
Commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") removed support for calling platform_get_resource(..., IORESOURCE_IRQ, ...) on DT-based drivers, but the probe() function of mtk-vcodec's encoder was still making use of it. This caused the encoder driver to fail probe. Since the platform_get_resource() call was only being used to check for the presence of the interrupt (its returned resource wasn't even used) and platform_get_irq() was already being used to get the IRQ, simply drop the use of platform_get_resource(IORESOURCE_IRQ) and handle the failure of platform_get_irq(), to get the driver probing again. [hverkuil: drop unused struct resource *res] Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-27media: dvb_vb2: fix possible out of bound accessHangyu Hua1-0/+11
vb2_core_qbuf and vb2_core_querybuf don't check the range of b->index controlled by the user. Fix this by adding range checking code before using them. Fixes: 57868acc369a ("media: videobuf2: Add new uAPI for DVB streaming I/O") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-27media: v4l2-ioctl.c: fix incorrect error pathHans Verkuil1-14/+12
If allocating array_buf fails, or copying data from userspace into that buffer fails, then just free memory and return the error. Don't attempt to call video_put_user() since there is no point, and it would copy back data on error even if INFO_FL_ALWAYS_COPY wasn't set. So if writing the array back to userspace fails, then don't go to out_array_args, instead just continue with the regular code that just returns the error unless 'always_copy' is set. Update the VIDIOC_G/S/TRY_EXT_CTRLS ioctls to set the ALWAYS_COPY flag since they now need it. Before this worked due to this buggy code, but now that that is fixed these ioctls need to set this flag explicitly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-27media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()Hans Verkuil1-0/+2
The v4l2_compat_get_array_args() function can leave uninitialized memory in the buffer it is passed. So zero it before copying array elements from userspace into the buffer. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+ff18193ff05f3f87f226@syzkaller.appspotmail.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-26media: flexcop-usb: use usb_endpoint_maxp()Johan Hovold1-1/+1
Use the usb_endpoint_maxp() helper instead of open coding. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151456.27178-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26media: flexcop-usb: clean up URB initialisationJohan Hovold1-4/+6
Clean up URB initialisation somewhat by introducing a temporary variable and separating declaration and non-trivial initialisation. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151456.27178-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26media: flexcop-usb: clean up endpoint sanity checksJohan Hovold1-4/+8
Add a temporary variable to make the endpoint sanity checks a bit more readable. While at it, fix a typo in the usb_set_interface() comment. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151456.27178-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26Merge 6.0-rc7 into usb-nextGreg Kroah-Hartman1-1/+1
We need the USB fixes in here for other follow-on changes to be able to be applied successfully. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24media: sun6i-csi: Move csi buffer definition to main header filePaul Kocialkowski2-8/+9
The buffer structure is a top-level definition, put it in the main header to keep things tidy. No functional change intended. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Introduce and use video helper functionsPaul Kocialkowski1-18/+28
Introduce some helpers for buffer and general video configuration. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Add media ops with link notify callbackPaul Kocialkowski1-0/+8
In order to keep the power use count fields balanced when link changes happen between v4l2_pipeline_pm_get/set calls (in open/close), the link_notify media operation callback needs to be registered. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Remove controls handler from the driverPaul Kocialkowski3-20/+1
The driver does not expose controls directly and thus does not need a controls handler for its own use. Controls attached to subdevs used to be exposed that way, however this can easily lead to issue when multiple subdevs attached to the same v4l2 device expose the same controls. Subdev controls should be set through each individual subdev node instead. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Register the media device after creationPaul Kocialkowski1-1/+8
There is no particular need to register the media device in the subdev notify complete callback. Register it in the v4l2 code instead where it's more in-context. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Pass and store csi device directly in video codePaul Kocialkowski3-51/+57
The video structure is part of the main csi device structure, so pass pointers to that top-level structure directly. This makes it easier to navigate and access other elements. No functional change intended. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Tidy up video codePaul Kocialkowski3-246/+285
Some code cleanups, renames, variable lowerings and moving things around for better organization. No functional change intended. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Tidy up v4l2 codePaul Kocialkowski1-47/+66
Various cosmetic improvements to the v4l2 registration code, with renames, lowerings, etc. The cleanup function is moved down after setup. No functional change intended. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Tidy up KconfigPaul Kocialkowski1-5/+7
Update the option title and help, group related options together, add dependency on VIDEO_DEV since the driver uses it and update the description. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Use runtime pm for clocks and resetPaul Kocialkowski2-26/+60
Wrap the clock and reset preparation into runtime pm functions for better organization of the code. Also fix the clock and reset enable order to first deassert reset, as recommended in Allwinner literature. Make the driver depend on PM while at it since runtime pm is mandatory for the driver to work. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Define and use variant to get module clock ratePaul Kocialkowski2-12/+39
Introduce a proper variant structure with the module clock rate instead of hardcoding it with a manual check on the compatible. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Always set exclusive module clock ratePaul Kocialkowski1-13/+41
In some situations the default rate of the module clock is not the required one for operation (for example when reconfiguring the clock tree to use a different parent). As a result, always set the correct rate for the clock (and take care of cleanup). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Tidy up platform codePaul Kocialkowski2-46/+56
Various renames, variables lowering and other cosmetic changes in the platform-support code. No functional change intended. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Refactor main driver data structuresPaul Kocialkowski4-227/+229
Merge contents of structs sun6i_csi and sun6i_csi_dev into a main sun6i_csi_device structure holding a sun6i_csi_v4l2 struct for things related to v4l2, as well as the already-existing sun6i_csi_video and sun6i_csi_config which are left unchanged. This mostly simplifies accessing stuff by having a single main structure accessible to every part of the code instead of a private definition. Also solve some kerneldoc warnings by describing return codes while at it. No functional change is intended in this commit, variables are just moved around (cosmetics). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Define and use driver name and (reworked) descriptionPaul Kocialkowski2-8/+9
Add proper defines for driver name and description instead of MODULE_NAME and hardcoding (cosmetics). Also rework the description while at it to mention the hardware generation that the driver supports and remove the video capture mentions since it applies to the whole media device. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLERPaul Kocialkowski1-1/+1
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: d77182ada3d4 ("media: sun8i: Add Allwinner A83T Rotate driver") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLERPaul Kocialkowski1-1/+1
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLERPaul Kocialkowski1-1/+1
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLERPaul Kocialkowski1-1/+1
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: 5cc7522d8965 ("media: sun6i: Add support for Allwinner CSI V3s") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun8i-a83t-mipi-csi2: Add a Kconfig dependency on RESET_CONTROLLERPaul Kocialkowski1-1/+1
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: sun6i-mipi-csi2: Add a Kconfig dependency on RESET_CONTROLLERPaul Kocialkowski1-1/+1
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. It also selects PHY_SUN6I_MIPI_DPHY, which depends on RESET_CONTROLLER. Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: venus: hfi: Remove the unneeded result variableye xingchen1-4/+1
Return the value venus_hfi_create() directly instead of storing it in another redundant variable. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: venus: venc: Set HDR10 PQ SEI property only for MAIN10 profileStanimir Varbanov1-1/+2
The HDR10 PQ SEI should be set only when the codec is HEVC and the profile is MAIN10, otherwise some artefacts could be produced on the encoded bitstream. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: venus: venc_ctrls: Add default value for CLL infoStanimir Varbanov1-1/+2
Add default value for CLL info when creating compound control. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 12:34:13 +0000