summaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2022-10-07Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds6-451/+109
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
2022-10-07Merge tag 'media/v6.1-1' of ↵Linus Torvalds239-35903/+27504
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New driver for Mediatek MDP V3 - New driver for NXP i.MX DW100 dewarper - Zoran driver got promoted from staging - Hantro and related drivers got promoted from staging - Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu, meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci, zr364xx) - Usual set of driver fixes, improvements and cleanups * tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits) media: destage Hantro VPU driver media: platform: mtk-mdp3: add MediaTek MDP3 driver media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA media: dt-binding: mediatek: add bindings for MediaTek MDP3 components media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init media: xilinx: video: Add 1X12 greyscale format media: xilinx: csi2rxss: Add 1X12 greyscale format media: staging: media: imx: imx7-media-csi: Increase video mem limit media: uvcvideo: Limit power line control for Sonix Technology media: uvcvideo: Use entity get_cur in uvc_ctrl_set media: uvcvideo: Fix typo 'the the' in comment media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl() media: uvcvideo: Fix memory leak in uvc_gpio_parse media: renesas: vsp1: Add support for RZ/G2L VSPD media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit media: renesas: vsp1: Add support for VSP software version media: renesas: vsp1: Add support to deassert/assert reset line media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start() media: amphion: fix a bug that vpu core may not resume after suspend ...
2022-10-05Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+2
Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
2022-10-04Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds182-472/+182
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-01Merge tag 'media/v6.0-1' of ↵Linus Torvalds5-21/+29
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some fixes for the v4l2 ioctl handler logic - a fix for an out of bound access in the DVB videobuf2 handler - three driver fixes (rkvdec, mediatek/vcodek and uvcvideo) * tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: rkvdec: Disable H.264 error detection media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ) media: dvb_vb2: fix possible out of bound access media: v4l2-ioctl.c: fix incorrect error path media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args() media: uvcvideo: Fix InterfaceProtocol for Quanta camera
2022-09-27Merge branch 'master' into i2c/for-mergewindowWolfram Sang1-1/+1
2022-09-27media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)Nícolas F. R. A. Prado1-6/+3
Commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") removed support for calling platform_get_resource(..., IORESOURCE_IRQ, ...) on DT-based drivers, but the probe() function of mtk-vcodec's encoder was still making use of it. This caused the encoder driver to fail probe. Since the platform_get_resource() call was only being used to check for the presence of the interrupt (its returned resource wasn't even used) and platform_get_irq() was already being used to get the IRQ, simply drop the use of platform_get_resource(IORESOURCE_IRQ) and handle the failure of platform_get_irq(), to get the driver probing again. [hverkuil: drop unused struct resource *res] Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-27media: dvb_vb2: fix possible out of bound accessHangyu Hua1-0/+11
vb2_core_qbuf and vb2_core_querybuf don't check the range of b->index controlled by the user. Fix this by adding range checking code before using them. Fixes: 57868acc369a ("media: videobuf2: Add new uAPI for DVB streaming I/O") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-27media: v4l2-ioctl.c: fix incorrect error pathHans Verkuil1-14/+12
If allocating array_buf fails, or copying data from userspace into that buffer fails, then just free memory and return the error. Don't attempt to call video_put_user() since there is no point, and it would copy back data on error even if INFO_FL_ALWAYS_COPY wasn't set. So if writing the array back to userspace fails, then don't go to out_array_args, instead just continue with the regular code that just returns the error unless 'always_copy' is set. Update the VIDIOC_G/S/TRY_EXT_CTRLS ioctls to set the ALWAYS_COPY flag since they now need it. Before this worked due to this buggy code, but now that that is fixed these ioctls need to set this flag explicitly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-27media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()Hans Verkuil1-0/+2
The v4l2_compat_get_array_args() function can leave uninitialized memory in the buffer it is passed. So zero it before copying array elements from userspace into the buffer. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+ff18193ff05f3f87f226@syzkaller.appspotmail.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-26media: flexcop-usb: use usb_endpoint_maxp()Johan Hovold1-1/+1
Use the usb_endpoint_maxp() helper instead of open coding. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151456.27178-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26media: flexcop-usb: clean up URB initialisationJohan Hovold1-4/+6
Clean up URB initialisation somewhat by introducing a temporary variable and separating declaration and non-trivial initialisation. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151456.27178-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26media: flexcop-usb: clean up endpoint sanity checksJohan Hovold1-4/+8
Add a temporary variable to make the endpoint sanity checks a bit more readable. While at it, fix a typo in the usb_set_interface() comment. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151456.27178-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26Merge 6.0-rc7 into usb-nextGreg Kroah-Hartman1-1/+1
We need the USB fixes in here for other follow-on changes to be able to be applied successfully. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22media: uvcvideo: move uvc_format_desc to common headerMichael Grzeschik3-349/+2
The uvc_format_desc, GUID defines and the uvc_format_by_guid helper is also useful for the uvc gadget stack. This patch moves them to a common header. Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220909221335.15033-3-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22media: v4l: move helper functions for fractions from uvc to v4l2-commonMichael Grzeschik4-94/+93
The functions uvc_simplify_fraction and uvc_fraction_to_interval are generic helpers which are also useful for other v4l2 drivers. This patch moves them to v4l2-common. Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220909221335.15033-2-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22media: flexcop-usb: fix endpoint type checkJohan Hovold1-1/+1
Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") tried to add an endpoint type sanity check for the single isochronous endpoint but instead broke the driver by checking the wrong descriptor or random data beyond the last endpoint descriptor. Make sure to check the right endpoint descriptor. Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") Cc: Oliver Neukum <oneukum@suse.com> Cc: stable@vger.kernel.org # 5.9 Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151027.27026-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-16Merge tag 'v6.0-rc5' into i2c/for-mergewindowWolfram Sang1-21/+14
Linux 6.0-rc5
2022-09-07media: vsp1: Add premultiplied alpha supportTakanari Hayama1-0/+2
To support DRM blend mode in R-Car DU driver, we must be able to pass a plane with the premultiplied alpha. Adding a new property to vsp1_du_atomic_config allows the R-Car DU driver to pass the premultiplied alpha plane. Signed-off-by: Takanari Hayama <taki@igel.co.jp> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-31media: destage Hantro VPU driverEzequiel Garcia38-0/+12444
The Hantro mainline driver has been used in production since several years and was only kept as a staging driver due the stateless CODEC controls. Now that all the stateless CODEC controls have been moved out of staging, graduate the driver as well. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-31media: uvcvideo: Fix InterfaceProtocol for Quanta cameraRicardo Ribalda1-1/+1
The Quanta 0408:4034 camera implements UVC 1.5, and thus sets bInterfaceProtocol to UVC_PC_PROTOCOL_15. Commit 95f03d973478 ("media: uvcvideo: Limit power line control for Quanta cameras") added a quirk for the device that incorrectly specified the UVC 1.0 protocol, rendering the quirk inoperative. Fix it. Link: https://lore.kernel.org/linux-media/20220822131754.102393-1-ribalda@chromium.org Fixes: 95f03d973478 ("media: uvcvideo: Limit power line control for Quanta cameras") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: platform: mtk-mdp3: add MediaTek MDP3 driverMoudy Ho22-0/+4994
This patch adds driver for MediaTek's Media Data Path ver.3 (MDP3). It provides the following functions: color transform, format conversion, resize, crop, rotate, flip and additional image quality enhancement. The MDP3 driver is mainly used for Google Chromebook products to import the new architecture to set the HW settings as shown below: User -> V4L2 framework -> MDP3 driver -> SCP (setting calculations) -> MDP3 driver -> CMDQ (GCE driver) -> HW Each modules' related operation control is sited in mtk-mdp3-comp.c Each modules' register table is defined in file with "mdp_reg_" prefix GCE related API, operation control sited in mtk-mdp3-cmdq.c V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c Probe, power, suspend/resume, system level functions are defined in mtk-mdp3-core.c [hverkuil: add 'depends on REMOTEPROC'] Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@mediatek.com> Signed-off-by: daoyuan huang <daoyuan.huang@mediatek.com> Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_initMiaoqian Lin1-4/+5
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: df3305156f98 ("[media] v4l: xilinx: Add Xilinx Video IP core") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: xilinx: video: Add 1X12 greyscale formatVolodymyr Kharuk1-0/+2
Extend the xilinx video driver with Y12_1X12 greyscale format Signed-off-by: Volodymyr Kharuk <vkh@melexis.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: xilinx: csi2rxss: Add 1X12 greyscale formatVolodymyr Kharuk1-0/+1
Extend the csi2rxss with Y12_1X12 greyscale format Signed-off-by: Volodymyr Kharuk <vkh@melexis.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: uvcvideo: Limit power line control for Sonix Technologyhuanglei1-0/+9
The device does not implement the power line control correctly. Add a corresponding control mapping override. Bus 003 Device 003: ID 3277:0072 Sonix Technology Co., Ltd. USB 2.0 Camera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x3277 idProduct 0x0072 bcdDevice 1.00 iManufacturer 2 Sonix Technology Co., Ltd. iProduct 1 USB 2.0 Camera iSerial 3 REV0001 bNumConfigurations 1 Signed-off-by: huanglei <huanglei@kylinos.cn> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: uvcvideo: Use entity get_cur in uvc_ctrl_setYunke Cao1-37/+46
Entity controls should get_cur using an entity-defined function instead of via a query. Fix this in uvc_ctrl_set. Fixes: 65900c581d01 ("media: uvcvideo: Allow entity-defined get_info and get_cur") Signed-off-by: Yunke Cao <yunkec@google.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: uvcvideo: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl()Laurent Pinchart1-15/+19
As shown by the bug introduced in commit 86f7ef773156 ("media: uvcvideo: Add support for per-device control mapping overrides"), the loop style used by uvc_ctrl_init_ctrl() is error-prone. Rewrite the loops to use indices instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: uvcvideo: Fix memory leak in uvc_gpio_parseJosé Expósito1-4/+4
Previously the unit buffer was allocated before checking the IRQ for privacy GPIO. In case of error, the unit buffer was leaked. Allocate the unit buffer after the IRQ to avoid it. Addresses-Coverity-ID: 1474639 ("Resource leak") Fixes: 2886477ff987 ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: renesas: vsp1: Add support for RZ/G2L VSPDBiju Das3-4/+22
The RZ/G2L VSPD provides a single VSPD instance. It has the following sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF. The VSPD block on RZ/G2L SoCs does not have a version register, so added a new compatible string "renesas,r9a07g044-vsp2" with a data pointer containing the info structure. Also the reset line is shared with the DU module. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bitBiju Das3-3/+19
As per HW manual V3M and RZ/G2L SoCs has nonzero LIF buffer attributes. So, introduce a feature bit for handling the same. This patch also adds separate device info structure for V3M and V3H SoCs, as both these SoCs share the same model ID, but V3H does not have VSP1_HAS_NON_ZERO_LBA feature bit. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: renesas: vsp1: Add support for VSP software versionBiju Das3-13/+33
The VSPD block on RZ/G2L SoCs does not have a version register. This patch adds support for adding VSP software version based on device match. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: renesas: vsp1: Add support to deassert/assert reset lineBiju Das2-2/+29
As the resets DT property is mandatory, and is present in all .dtsi in mainline, add support to perform deassert/assert using reference counted reset handle. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mceusb: Use new usb_control_msg_*() routinesAlan Stern1-21/+14
Automatic kernel fuzzing led to a WARN about invalid pipe direction in the mceusb driver: ------------[ cut here ]------------ usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40 WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410 usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41 RSP: 0018:ffffc900032becf0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000 RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90 RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000 R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000 R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153 mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline] mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807 The reason for the warning is clear enough; the driver sends an unusual read request on endpoint 0 but does not set the USB_DIR_IN bit in the bRequestType field. More importantly, the whole situation can be avoided and the driver simplified by converting it over to the relatively new usb_control_msg_recv() and usb_control_msg_send() routines. That's what this fix does. Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/ Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: stable@vger.kernel.org Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkfnBFCSEVC6XZu@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30media: amphion: fix a bug that vpu core may not resume after suspendMing Qian4-44/+51
driver will enable the vpu core when request the first instance on the core. one vpu core can only support 8 streaming instances in the same time, the instance won't be added to core's list before streamon. so the actual instance count may be greater then the number in the core's list. in pm resume callback, driver will resume the core immediately if core's list is not empty. but this check is not accurate, if suspend during one instance is requested, but not streamon, then after suspend, the core won't be resume, and led to instance failure. use the request_count instead of the core's list to check whether is the core needed to resume immediately after suspend. And it can make the pm suspend and resume callback more clear. Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: platform: fix some double free in meson-ge2d and mtk-jpeg and s5p-mfcHangyu Hua3-4/+1
video_unregister_device will release device internally. There is no need to call video_device_release after video_unregister_device. Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: amphion: don't change the colorspace reported by decoder.Ming Qian1-8/+8
decoder will report the colorspace information which is parsed from the sequence header, if they are unspecified, just let application to determine it, don't change it in driver. Fixes: 6de8d628df6ef ("media: amphion: add v4l2 m2m vpu decoder stateful driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: amphion: adjust the encoder's value range of gop sizeMing Qian1-1/+1
adjust the value range of gop size from [0, 65535] to [1, 8000]. when the gop size is set to a too large value, it may affect the encoded picture quality. so constrain it to a reasonable range. Fixes: 0401e659c1f92 ("media: amphion: add v4l2 m2m vpu encoder stateful driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: amphion: insert picture startcode after seek for vc1g formatMing Qian1-1/+1
For format vc1, the amphion vpu requires driver to help insert some custom startcode before sequence and frame. the startcode is different for vc1l and vc1g format. But the sequence startcode is only needed at the beginning, and it's not expected after seek. driver need to treat the codec header and the first frame after seek as a normal frame, and insert picture startcode for it. In previous patch, I just fix it for vc1l format, and should fix the similar issue for vc1g too. Fixes: e670f5d672ef (media: amphion: only insert the first sequence startcode for vc1l format) Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: videobuf2: Remove vb2_find_timestamp()Ezequiel Garcia1-13/+0
Now that we've transitioned all users to vb2_find_buffer API, remove the unused vb2_find_timestamp(). Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mediatek: vcodec: Skip non CBR bitrate modeHirokazu Honda1-1/+2
V4L2_MPEG_VIDEO_BITRATE_MODE_CBR is the only bitrate mode supported by the mediatek driver. The other bitrates must be skipped in QUERY_MENU. Fixes: d8e8aa866ed8 ("media: mediatek: vcodec: Report supported bitrate modes") Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mediatek: vcodec: Add mt8188 encoder's chip nameYunfei Dong1-0/+2
Getting mt8188's chip name according to encoder compatible name. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mediatek: vcodec: add decoder compatible to support mt8188Yunfei Dong2-0/+6
1: add mt8188's compatible name: mediatek,mt8188-vcodec-dec. 2: mt8188 is lat single core architecture, using mtk_lat_sig_core_pdata to initialize private data. 3: Getting mt8188's chip name according to decoder compatible name. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mediatek: vcodec: Use ctx vb2_queue mutex instead of device mutexIrui Wang3-3/+7
There is only one device mutex to lock vb2_queue when running multi-instance encoding, it can be set by each encoder context. [hverkuil: fix q_mutex documentation in the header] Signed-off-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mediatek: vcodec: Fix bitstream crop information errorIrui Wang1-4/+4
Usually, the real bitstream width and height will set to driver by vidioc_s_fmt, and vidioc_try_fmt() does align to get the buffer width and height, driver calculate the encoded bitstream crop information through them. The aligned resolution will be set as real resolution now if user didn't set crop info by V4L2_SEL_TGT_CROP, and the encoded bitstream may exist green line because of crop information error. Fixs: 'b6c57d313f5f8 ("media: mtk-vcodec: venc: remove redundant code")' Signed-off-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mediatek: vcodec: Remove encoder driver get IRQ resourceIrui Wang1-8/+0
The "platform_get_resource(pdev, IORESOURCE_IRQ, 0)" is no longer used after commit a1a2b7125e107("of/platform: Drop static setup of IRQ resource from DT core"), so just remove the function in encoder driver to avoid driver probe failed. Signed-off-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mediatek: vcodec: Add mt8188 encoder driverIrui Wang1-0/+13
Add mt8188's compatible "mediatek,mt8188-vcodec-enc". Add mt8188's device private data "mt8188_pdata". Signed-off-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: mediatek: vcodec: Add encoder driver support for 34-bit iovaIrui Wang4-37/+266
Encoder driver got iova from IOMMU is 34-bit, for example: Here is the sample code: encoder input frame buffer dma address is: frm_buf = vb2_dma_contig_plane_dma_addr(&vb2_v4l2_buffer->vb2_buf, 0); the value of frm_buf is 0x1_ff30_0000. encoder driver got the frm_buf and send the iova to SCP firmware through SCP IPI message, then write to encoder hardware in SCP. The iova is stored in IPI message as uint32_t data type, so the value will be truncated from *0x1_ff30_0000* to *0xff30_0000*, and then *0xff30_0000* will be written to encoder hardware, but IOMMU will help to add the high *0x1_* bit back, so IOMMU can translate the iova to PA correctly, encoder hardware can access the correct memory for encoding. Another reason to do this is the encoder hardware can't access the 34-bit iova, IOMMU will help to add the remaining high bits of iova. But for mt8188, encoder hardware can access 34-bit iova directly, and encoder driver need write all 34 bits because IOMMU can't help driver do this if the hardware support access 34-bit iova. For the reasons above, this patch is added to support transfer 34-bit iova between kernel and SCP encoder driver. Use uint64_t data type to store the iova, for compatibility with old chipsets, add some new struct definitions for 34-bit. [hverkuil: initialize wb and wb_34 to NULL] Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30media: ti: cal: fix wdma irq for metadataTomi Valkeinen1-4/+27
CAL HW interrupts are inherently racy. If we get both start and end interrupts, we don't know what has happened: did the DMA for a single frame start and end, or did one frame end and a new frame start? Usually for normal pixel frames we get the interrupts separately. If we do get both, we have to guess. The assumption in the code is that the active vertical area is larger than the blanking vertical area, and thus it is more likely that we get the end of the old frame and the start of a new frame. However, for embedded data, which is only a few lines high, we always get both interrupts. Here the assumption is that we get both for the same frame. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 07:57:00 +0000