summaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2008-01-17fix wrong sized spinlock flags argumentDaniel Walker1-2/+1
Correct wrong sized spinlock flags, form int to unsigned long. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11V4L/DVB (7001): av7110: fix section mismatchRandy Dunlap1-5/+5
Fix driver data name to match whitelist of acceptable names that contain pointers init data so that section mismatch warning is placated. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-11V4L/DVB (6999): ivtv: stick to udelay=10 after allHans Verkuil1-4/+0
Using an udelay of 5 seems to result in problems for several people. For now abandon the udelay value of 5 and stick to 10, even though this will mean a longer load time of the cx2584x firmware. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-07V4L/DVB (6916): ivtv: udelay has to be changed *after* the eeprom was read, ↵Hans Verkuil2-4/+5
not before The eeprom decides which Hauppauge model it is, so the decision whether to use an udelay of 5 or 10 needs to be taken after reading the eeprom, not before. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-07V4L/DVB (6944a): Fix Regression VIDIOCGMBUF ioctl hangs on bttv driverGregor Jasny1-3/+1
Fix bttv VIDIOCGMBUF locking like done in commit 820eacd84cff23b76693f4be1e28feb672f4488f. Signed-off-by: Gregor Jasny <gjasny@web.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-24V4L/DVB (6876): ivtv: mspx4xx needs a longer i2c udelayHans Verkuil1-0/+3
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-24V4L/DVB (6871): Kconfig: VIDEO_CX23885 must select DVB_LGDT330XMichael Krufky1-0/+1
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-13V4L/DVB (6820): s5h1409: QAM SNR related fixesSteven Toth1-3/+8
QAM SNR values were incorrect when the cable was disconnected. This patch extends the lookup tables to ensure correct values are being returned. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-13V4L/DVB (6819): i2c: fix drivers/media/video/bt866.cAndrew Morton1-1/+0
usage_count got removed. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-13V4L/DVB (6814): Makefile: always enter video/Adrian Bunk1-1/+1
Since not all code under drivers/media/video/ depends on CONFIG_VIDEO_DEV we cannot only enter it depending on CONFIG_VIDEO_DEV. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-13V4L/DVB (6798): saa7134: enable LNA in analog mode for Hauppauge WinTV HVR-1110Michael Krufky1-0/+1
Thanks to Hermann Pitton for noticing that this was missing. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-13V4L/DVB (6803): buf-core.c locking fixesAdrian Bunk1-2/+2
After commit 19fb1457990b6b7e15586ec7331541a184233acc the callers in videobuf-core.c that already hold the lock must call __videobuf_read_start() instead of videobuf_read_start(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-12V4L/DVB (6609): Re-adds lock safe videobuf_read_startMauro Carvalho Chehab1-1/+13
videobuf_dvb needs videobuf_read_start. The EXPORT_SYMBOL_GPL() were removed by a previous patch. However, videobuf_dvb needs this. This patch re-adds videobuf_read_start, doing the proper lock. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6797): bt8xx/ section fixesAdrian Bunk2-3/+3
This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6796): ivtv/ section fixAdrian Bunk2-2/+2
This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6794): Fix compilation when dib3000mc is compiled as a moduleMauro Carvalho Chehab1-1/+3
As reported by Andrew Morton: > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6733): DVB: Compile 3000MC-specific DIB code only for ↵Jiri Kosina1-0/+2
CONFIG_DVB_DIB3000MC On Tue, 4 Dec 2007, Ingo Molnar wrote: > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_get_tuner_i2c_master' > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_set_config' Seems like -common part contains also code that is not completely common to all the modules. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6750): Fix in-kernel compilation for cxusbMauro Carvalho Chehab1-0/+3
cxusb needs tuner-xc2028*.h files, but Makefile is not adding its patch drivers/media/dvb/dvb-usb/cxusb.c:33:26: error: tuner-xc2028.h: File not found drivers/media/dvb/dvb-usb/cxusb.c:34:32: error: tuner-xc2028-types.h: File not found Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6746): saa7134-dvb: fix tuning for WinTV HVR-1110Benoit Istin1-0/+1
There are several months my hvr1110 stop working. This is very simple to fix, for my card revision at least, by setting a missing field to the hauppauge_hvr_1110_config. Signed-off-by: Benoit Istin <beistin@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6751): V4L: Memory leak! Fix count in videobuf-vmalloc mmapBrandon Philips1-3/+3
This is pretty serious bug. map->count is never initialized after the call to kmalloc making the count start at some random trash value. The end result is leaking videobufs. Also, fix up the debug statements to print unsigned values. Pushed to http://ifup.org/hg/v4l-dvb too Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6690): saa7134: fix ignored interruptsHeikki Lindholm2-11/+13
The saa7134 video driver starts dropping frames when used together with the saa7134-alsa driver. Frames are dropped because when an audio event is waiting the driver simply ignores the interrupt and passes it on to the saa7134-alsa interrupt handler. The alsa interrupt handler in turn acknowledges all types of events thus clearing the pending video events as well. Fix by only masking out the audio event in the video interrupt handler and by only acknowledging the audio event in the alsa driver. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6686): saa7134: fix composite over s-video input on the Tevion MD 9717Hermann Pitton1-1/+1
The vmux for composite over s-video input was wrong. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6684): Complement va_start() with va_end() + style fixesRichard Knutsson2-7/+11
Complement va_start() with va_end() + minor style fixes in the same function. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6666): saa7134-alsa: fix period handlingHeikki Lindholm1-3/+10
The period handling in saa7134-alsa is broken in two ways. First, the minimum number of periods of two does not work, because the dma is setup two periods ahead in the irq handler. Fix the minimum to four periods. Second, the code assumes that the number of periods is divisible by two, which isn't always the case on ALSA. Fix by adding a constraint. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6629): zl10353: fix default adc_clock and TRL nominal rate calculationChris Pascoe2-3/+3
The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6615): V4L: Fix VIDIOCGMBUF locking in saa7146Brandon Philips1-5/+1
Fallout from videobuf_mmap_setup() locking fixes. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6602): V4L: Convert videobuf drivers to videobuf_stopBrandon Philips6-20/+6
Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6601): V4L: videobuf-core locking fixes and commentsBrandon Philips2-93/+159
- Add comments to functions that require that caller hold q->lock - Add __videobuf_mmap_free that doesn't hold q->lock for use within videobuf - Add locking to videobuf_mmap_free - Fix linux/drivers/media/common/saa7146_video.c which was holding lock around videobuf_read_stop - Add locking to functions that operate on a queue - Add videobuf_stop to take care of stopping in both the read and stream case TODO: bttv still has an unsafe call to videobuf_queue_is_busy Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6581): Fix: avoids negative vma usage countMauro Carvalho Chehab1-1/+3
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6579): Fix bug #8824: Correct support for Diseqc on tda10086Hartmut Hackmann1-7/+7
This is a modified version of a patch previously posted by Thomas Unverzagt. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6542): Fix S-video mode on tvp5150Mauro Carvalho Chehab1-0/+11
Thanks to Markus Reichberger to point this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6540): em28xx: fix failing autodetection after the rebootSascha Sommer1-1/+2
The attached patch is required so that the autodetecion code also works after a reboot. Setting the I2C speed does not seem to be supported for em2800. Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6485): ivtv: fix compile warningHans Verkuil1-1/+1
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6548): pvrusb2: Fix oops on module removalMike Isely1-3/+2
The pvrusb2 driver is tearing down its sysfs related pieces in the incorrect order. This leaves dangling pointers which causes the kernel device core to oops. The problem has been present virtually forever but became malignant with the changeover to the way of handling /sys/class. Fix is just to make sure we don't tear down the class structure until AFTER the driver instances are deregistered. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6547): V4L: remove PCI from VIDEO_VIVI dependsBrandon Philips1-1/+1
vivi.c is a virtual driver that builds without PCI and should run on non-pci hardware. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6532): Add the remaining addresses for tda9887Mauro Carvalho Chehab1-2/+3
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6531): Fix a regression caused by commit ↵Ludovico Cavedon1-0/+1
153962364dc6fa4a24571885fbe76506d8968610 From: Ludovico Cavedon <cavedon@sssup.it> Signed-off-by: Ludovico Cavedon <cavedon@sssup.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6518): Fix tvp5150 default valuesMauro Carvalho Chehab1-8/+8
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6514): em28xx: Include linux/mm.hTrent Piepho1-0/+1
This em28xx-video.c uses functions from this header, but doesn't include it. It depends on some v4l headers included two levels down including poll.h, which includes mm.h. These v4l headers might change, so it's best to include the headers needed directly. It also causes problems for the out of core build system's backward compatibility with older kernels, which is the real reason I bothered to create a patch for something that would otherwise be so minor that it would hardly be worth the trouble. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6506): saa7134-alsa: Fix mmap supportAlexander E. Patrakov1-1/+15
Trent Piepho wrote: > I do not think the saa7134-alsa driver supports mmap. The cx88-alsa driver > also claimed to support mmap, but it never worked until I fixed it. It's > pretty clear that the code in saa7134-alsa was based on the same code as > cx88-alsa, so it's likely it has the same bug. You are right. The patch below (based on your cx88 patch, but I don't really understand it) fixes mmap support in saa7134-alsa for me. Recording via mmap (arecord -M -f S16_LE -c 2 -r 32000 -D hw:1) didn't work at all before, works now, tested for at least 20 minutes (but, unfortunately, with one overrun at least 0.719 ms long). Signed-off-by: Alexander E. Patrakov <patrakov@ums.usu.ru> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6504): pvrusb2: Remove dead sysfs codeMike Isely1-8/+0
The pvrusb2 driver's sysfs implementation had long since implemented a dummy hotplug function because at the time the kernel would oops without at least the empty function being present. Today - after numerous class interface changes in the kernel - this pvrusb2 change had been dutifully carried forward but an inspection of the kernel sources shows that it is no longer needed. So remove the dummy function and its reference. This also solves a recurring backwards compatibility issue in the pvrusb2 driver as the class interface has been getting thrashed in the kernel. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6503): pvrusb2: Fix associativity logic errorRoel Kluin1-1/+1
if(!x & y) should either be if(!(x & y)) or if(!x && y) I made changes as seemed appropriate, but please review this is against current git. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6501): stv0297: Signal strength fixesHartmut Birr1-5/+17
Fixes the signal strength value (higher value = higher signal strength) and scales the value to the range of 0..ffff. The characteristic itself is wrong. To get proper values on a TT-C2300 in the range of 40..60% real signal strength, the values from the patch should be divide by two. The attached patch doesn't fix the characteristic. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6500): tda10021: Fix reported signal strengthHartmut Birr1-0/+4
Fix reported signal strength value (higher value = higher signal strength). Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6499): tda10021: Bit error counting fixedHartmut Birr1-0/+2
Bit error counting fixed for the tda10021. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery ↵Oliver Endriss1-1/+1
from 120 ppm to 240ppm Change the acquisition range for clock recovery from 120 ppm to 240ppm. Apparently, some cable providers in Germany are playing with their parameters, and the capture range of the ves1820 is too small to acquire a lock with the current setting... ;-( Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixesOliver Endriss1-12/+58
Two fixes for the 'saa7146_wait_for_debi_done' code: (a) Timeout did not work when the routine was called with interrupts disabled. (b) Reduce PCI I/O load caused by saa7146_wait_for_debi_done. Seems to be very important on fast machines! Based on code posted by Hartmut Birr @vdr-portal. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6479): use input functions, should depend on INPUTRandy Dunlap5-5/+5
All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6478): ir-functions use input functions, should depend on INPUTRandy Dunlap1-0/+1
Media ir-functions uses input_(*) functions so it should depend on the INPUT config symbol. drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=mAdrian Bunk1-5/+1
This patch fixes CONFIG_TUNER_TEA5761=m broken by commit ca805d57cf5ea7482ed3da28653f30621249ee45. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 02:35:30 +0000