| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
The driver uses a zero-length i2c-read request for type detection so
update the control-request code to use usb_sndctrlpipe() in this case.
Note that actually trying to read the i2c register in question does not
work as the register might not exist (e.g. depending on the demodulator)
as reported by Eero Lehtinen <debiangamer2@gmail.com>.
Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com
Reported-by: Eero Lehtinen <debiangamer2@gmail.com>
Tested-by: Eero Lehtinen <debiangamer2@gmail.com>
Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type")
Cc: stable@vger.kernel.org # 4.0
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This reverts commit 25d5ce3a606a1eb23a9265d615a92a876ff9cb5f.
The patch in question causes a regression and was superseded by a second
version. Unfortunately, the first revision ended up being applied
instead of the correct one.
Link: https://lore.kernel.org/r/YL3MCGY5wTsW2kEF@hovoldconsulting.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Instead of using:
- U+00a0 (' '): NO-BREAK SPACE
Use a normal white space.
This was probably introduced by some cut-and-paste.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the zero-length i2c-read request used for type detection by
attempting to read a single byte instead.
Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com
Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type")
Cc: stable@vger.kernel.org # 4.0
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The adapter count is fixed at compile time so we can delete the
lme2510_get_adapter_count() function and set ".num_adapters = 1"
instead. There is also no need to create a zeroed adapter
element at the end of the array. Remove that as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix the following kernel-doc warnings:
drivers/media/usb/dvb-usb-v2/dvb_usb.h:109: warning: cannot understand function prototype: 'struct dvb_usb_driver_info '
drivers/media/usb/dvb-usb-v2/dvb_usb.h:126: warning: cannot understand function prototype: 'struct dvb_usb_rc '
drivers/media/usb/dvb-usb-v2/dvb_usb.h:143: warning: cannot understand function prototype: 'struct usb_data_stream_properties '
drivers/media/usb/dvb-usb-v2/dvb_usb.h:170: warning: expecting prototype for properties of dvb usb device adapter(). Prototype was for
MAX_NO_OF_FE_PER_ADAP() instead
drivers/media/usb/dvb-usb-v2/dvb_usb.h:221: error: Cannot parse struct or union!
drivers/media/usb/dvb-usb-v2/dvb_usb.h:277: warning: expecting prototype for generic object of an usb stream(). Prototype was for
MAX_NO_URBS_FOR_DATA_STREAM() instead
drivers/media/usb/dvb-usb-v2/dvb_usb.h:319: warning: cannot understand function prototype: 'struct dvb_usb_adapter '
drivers/media/usb/dvb-usb-v2/dvb_usb.h:363: warning: cannot understand function prototype: 'struct dvb_usb_device '
drivers/media/usb/dvb-usb/dvb-usb.h:104: warning: cannot understand function prototype: 'struct usb_data_stream_properties '
drivers/media/usb/dvb-usb/dvb-usb.h:163: warning: expecting prototype for struct dvb_usb_adapter_properties. Prototype was for struct
dvb_usb_adapter_fe_properties instead
drivers/media/usb/dvb-usb/dvb-usb.h:205: warning: cannot understand function prototype: 'struct dvb_rc '
drivers/media/usb/dvb-usb/dvb-usb.h:227: warning: Enum value 'DVB_RC_LEGACY' not described in enum 'dvb_usb_mode'
drivers/media/usb/dvb-usb/dvb-usb.h:227: warning: Enum value 'DVB_RC_CORE' not described in enum 'dvb_usb_mode'
drivers/media/usb/dvb-usb/dvb-usb.h:271: error: Cannot parse struct or union!
drivers/media/usb/dvb-usb/dvb-usb.h:325: error: Cannot parse struct or union!
drivers/media/usb/dvb-usb/dvb-usb.h:385: warning: expecting prototype for struct dvb_usb_adapter. Prototype was for struct
dvb_usb_fe_adapter instead
drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'num_adapters_initialized' not described in 'dvb_usb_device'
drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'adapter' not described in 'dvb_usb_device'
drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'rc_phys' not described in 'dvb_usb_device'
drivers/media/usb/em28xx/em28xx.h:377: warning: cannot understand function prototype: 'enum em28xx_amux '
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Simplify the return expression.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding a couple of break statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fixes this smatch warning:
drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1040 rtl2832u_frontend_attach() warn: missing error code 'ret'
It is actually a bogus warning since in this particular case ret isn't
meant to be set. But by reworking the code a bit the code is actually
a lot more understandable and it fixes this warning.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This function is not necessary and largely a remnant of
dvb-usb workaround and is now controlled by dvb-usb-v2.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
lme2510_int_read is not atomically called so use GFP_KERNEL for
usb_alloc_urb and usb_submit_urb which is the first in the chain
of interrupt submissions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There's a comma used instead of a semicolon that causes multiple
statements to be executed after an if instead of just the intended
single statement.
Replace the comma with a semicolon.
Fixes: 15e1ce33182d ("[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the missing platform_device_unregister() before return
from zd1301_frontend_attach in the error handling case when
pdev->dev.driver is empty.
There's an error handling route named err_platform_device_unregister,
so just reuse it.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.
Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.
Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.
This affects:
- rx_resolution member of struct rc_dev
- timeout member of struct rc_dev
- duration member in struct ir_raw_event
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
MyGica T230* receivers also do DVB-C and DVB-T: change their names.
Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There are some tuners used by a few pure DVB boards that use
internally V4L2 function calls. Due to that, such drivers now
depends on v4l2 core support, and can't be auto-selected
if !VIDEO_V4L2:
WARNING: unmet direct dependencies detected for DVB_RTL2832_SDR
Depends on [n]: MEDIA_SUPPORT [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_CORE [=y] && I2C [=y] && I2C_MUX [=y] && VIDEO_V4L2 [=n] && MEDIA_SDR_SUPPORT [=y] && USB [=y]
Selected by [y]:
- DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y] && MEDIA_SDR_SUPPORT [=y]
WARNING: unmet direct dependencies detected for MEDIA_TUNER_E4000
Depends on [n]: (MEDIA_ANALOG_TV_SUPPORT [=y] || MEDIA_DIGITAL_TV_SUPPORT [=y] || MEDIA_RADIO_SUPPORT [=y] || MEDIA_SDR_SUPPORT [=y]) && MEDIA_SUPPORT [=y] && I2C [=y] && VIDEO_V4L2 [=n]
Selected by [y]:
- DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y]
WARNING: unmet direct dependencies detected for MEDIA_TUNER_FC2580
Depends on [n]: (MEDIA_ANALOG_TV_SUPPORT [=y] || MEDIA_DIGITAL_TV_SUPPORT [=y] || MEDIA_RADIO_SUPPORT [=y] || MEDIA_SDR_SUPPORT [=y]) && MEDIA_SUPPORT [=y] && I2C [=y] && VIDEO_V4L2 [=n]
Selected by [y]:
- DVB_USB_RTL28XXU [=y] && USB [=y] && MEDIA_SUPPORT [=y] && MEDIA_USB_SUPPORT [=y] && I2C [=y] && MEDIA_DIGITAL_TV_SUPPORT [=y] && DVB_USB_V2 [=y] && I2C_MUX [=y] && MEDIA_SUBDRV_AUTOSELECT [=y]
Detected via randconfig builds.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Instead of using USB_DEVICE() macro directly, use the
DVB_USB_DEVICE() one, as other dvb-usb-v2 devices.
The usage of the new macro makes cleaner and easier to
parse the supported device names in a way that it would
be easily parseable to generate cardlists.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The USB_PID_ALINK_DTU is a Product ID, not a vendor ID.
Fix that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Those documents don't really describe the driver API.
Instead, they contain development-specific information.
Yet, as the main index file describes the content of it as:
"how specific kernel subsystems work
from the point of view of a kernel developer"
It seems to be the better fit.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Most of the driver-specific documentation is meant to help
users of the media subsystem.
Move them to the admin-guide.
It should be noticed, however, that several of those files
are outdated and will require further work in order to make
them useful again.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The variable gate is being initialized and also checked and re-assigned
with values that are never read as it is being re-assigned later in a
for-loop with a new value. The assignments are redundant and can be
removed.
Addresses Coverity ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Slave demod needs some time to wake up otherwise it may not respond to the
following probe commands. This problem manifested randomly on my Astrometa
DVB-T2 dongle.
Signed-off-by: Mario Hros <git@reversity.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The anysee_tda18212_config and anysee_tda18212_config2 structures
are only copied into other structures, so make them const.
The opportunity for this change was found using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the newer API returning an ERRPTR and use the new helper to bail
out.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the newer API returning an ERRPTR and use the new helper to bail
out.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the newer API returning an ERRPTR and use the new helper to bail
out.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the newer API returning an ERRPTR and use the new helper to bail
out.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Seems to be a clone of Logilink VG0022A. Supports DVB-C, DVB-T and
DVB-T2. Only terrestrial reception was tested on Polish and Czech
multiplexes.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This adds support for the PROlectrix DV107669 DVT-T dongle which
uses an RTL2832 and FC0012 tuner.
Tests:
- Verified correct operation of DVB-T reception with VLC across
several UK multiplexes
Signed-off-by: David J. Fiddes <D.J@fiddes.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
remove unused code
Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds USB ID for the eyeTV Geniatech T2 lite to the dvbsky driver.
This is a Geniatech T230C based stick without IR and a different USB ID.
Signed-off-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This includes a hack for the device as it returns only 0xff after a new
firmware is loaded. To quote Mauro:
"When the [...] firmware that came with the device is replaced
by a new one, any I2C data received from the tuner will be
replaced by 0xff.
Probably, the vendor firmware has some patch specifically
designed for this device. So, we can't replace by the generic
firmware.
The right solution would be to extract the [...] firmware from
the original driver and ask the driver to load the specifically
designed firmware, but, while we don't have that, the next best
solution is to just keep the original firmware at the device."
Signed-off-by: Gon Solo <gonsolo@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
A very old patch sent to the media ML used to contain the
I2C speed formula:
https://lore.kernel.org/linux-media/1312539895.2763.33.camel@Jason-Linux/
When the ite9135 code was merged with af9035, the formula was
lost. As we might need to slow down the speed for some devices,
add the formula again.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Support Friio devices to read from tuner via demod tc90522,
by enabling the config option.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The header contained just internal definitions
and they are not used anymore.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
For Friio dvb cards, a distinct I2C algo was provided to support
some "long" I2C messages used in relaying tuner I2C via demod.
Since the other (generic) i2c algo in this module has been patched
to support those messages in a more generic way,
this patch replaces and integrates the device-specific i2c algo
with the generic one and simplifies the code.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Device I2C adapter is capable of writing and reading large messages.
For I2C writes there is 2 methods: simple for max 2 byte messages and
usb_control_msg() with payload data for larger I2C messages. Add I2C
adapter logic which selects suitable method according to message size.
Add also support for plain I2C read.
Cc: Akihiro TSUKADA <tskd08@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Re-use usb_mutex from dvb_usb_device for this.
Tested-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Andrei Koshkosh <andreykosh000@mail.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Currently the IR receiver is put into idle mode after each interrupt.
However longer IR like NEC can be distributed over multiple interrupts,
so putting the IR into idle in the middle of such a message will break
decoding.
Every IR message has a trailing space of 0xbf (one less than
IR_IDE_LEN{0,1} which is programmed to 0xc0). So, set the timeout to that
value and rc-core will put the IR receiver into idle mode automatically.
Thanks to Jan Pieter van Woerkom <jp@jpvw.nl> for providing the hardware.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Thanks to Jan Pieter van Woerkom <jp@jpvw.nl> for providing the hardware.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
On 32-bits archs, a signed integer has 31 bits plus on extra
bit for signal. Due to that, touching the 32th bit with something
like:
int bar = 1 << 31;
has an undefined behavior in C on 32 bit architectures, as it
touches the signal bit. This is warned by cppcheck.
Instead, force the numbers to be unsigned, in order to solve this
issue.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The static structure ec168_props, of type dvb_usb_device_properties, is
used only once, when it is assigned to field props of the constant
structure ec168_driver_info. As this means that ec168_props will never be
modified, make it const as well in order to prevent unintended
modification of its fields.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
commit 5fa88151ecdb ("[media] dvb-usb-cxusb: Geniatech T230 - resync TS
FIFO after lock") does not solve the problem for all devices. This is the
same issue reported on the T230C, which was moved to the dvbsky.c driver
to work around this issue in commit 5742240577b6 ("media: dvbsky: MyGica
T230C support").
In addition, the cxusb driver causes an oops when unplugging the device
while streaming; this problem does not happen any more.
Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Adds support for the "Mygica T230C v2" to the dvbsky driver.
Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Tested-by: Frank Rysanek <Frantisek.Rysanek@post.cz>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new Atmel microship ISC driver
- coda has gained support for mpeg2 and mpeg4
- cxusb gained support for analog TV
- rockchip staging driver was split into two separate staging drivers
- added a new staging driver for Allegro DVT video IP core
- added a new staging driver for Amlogic Meson video decoder
- lots of improvements and cleanups
* tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits)
media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs
media: doc-rst: Fix typos
media: radio-raremono: change devm_k*alloc to k*alloc
media: stv0297: fix frequency range limit
media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes
media: dvb_frontend: split dvb_frontend_handle_ioctl function
media: mceusb: disable "nonsensical irdata" messages
media: rc: remove redundant dev_err message
media: cec-notifier: add new notifier functions
media: cec: add struct cec_connector_info support
media: cec-notifier: rename variables, check kstrdup and n->conn_name
media: MAINTAINERS: Add maintainers for Media Controller
media: staging: media: tegra-vde: Defer dmabuf's unmapping
media: staging: media: tegra-vde: Add IOMMU support
media: hdpvr: fix locking and a missing msleep
media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()
media: atmel: atmel-isc: fix i386 build error
media: v4l2-ctrl: Move compound control initialization
media: hantro: Use vb2_get_buffer
media: pci: cx88: Change the type of 'missed' to u64
...
|
|
Based on 2 normalized pattern(s):
the original driver s license is gpl as declared with module_license
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation under version 2 of the license this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
the original driver s license is gpl as declared with module_license
[copyright] [c] [2010] [2012] [mauro] [carvalho] [chehab] [driver]
[modified] [by] [in] [order] [to] [work] [with] [upstream] [drxk]
[driver] [and] [tons] [of] [bugs] [got] [fixed] [and] [converted]
[to] [use] [dvb] [usb] [v2] this program is free software you can
redistribute it and or modify it under the terms of the gnu general
public license as published by the free software foundation under
version 2 of the license this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204654.186977917@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
