summaryrefslogtreecommitdiffstats
path: root/drivers/media/rc
AgeCommit message (Collapse)AuthorFilesLines
2014-01-15[media] rc-core: reuse device numbersMauro Carvalho Chehab1-3/+17
Before changeset d8b4b5822f51e, the remote controller device numbers were released when the device were unregistered. That helped to maintain some sanity, as, when USB devices are replugged, the remote controller would get the same number. Restore the same behaviour. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-15[media] media: st-rc: Add reset supportSrinivas Kandagatla1-0/+13
Some of the SOCs hold the IRB IP in softreset state by default. For this IP to work driver needs to bring it out of softreset. This patch adds support to reset the IP via reset framework. Without this patch the driver can not work with SoCs which holds the IP in softreset. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07[media] media: Remove OOM message after input_allocate_deviceJoe Perches1-6/+2
Emitting an OOM message isn't necessary after input_allocate_device as there's a generic OOM and a dump_stack already done. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10[media] mceusb: Add Hauppauge WinTV-HVR-930C HDMatthias Schwarzott1-0/+10
Add usb id of Hauppauge WinTV-HVR-930C HD to mceusb RC driver. This device has no IR transmitter (according to eeprom content decoded by tveeprom). Set the rc mapping to Hauppauge, every key of the deliviered remote control works correctly. [m.chehab@samsung.com: fix merge conflicts and unmangled whitespace] Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10[media] dw2102: Use RC Core instead of the legacy RC (second edition)Evgeny Plehov2-1/+77
Use RC Core instead of the legacy RC. DVBWorld, TBS, TeVii, Prof hardware decode only NEC remotes (one byte code). Geniatech hardware decode only RC5 (two bytes). + New keymap for Geniatech HDStar (SU3000). Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29[media] media_tree: Fix spelling errorsJonathan McCrohan2-2/+2
Fix various spelling errors in strings and comments throughout the media tree. The majority of these were found using Lucas De Marchi's codespell tool. [m.chehab@samsung.com: discard hunks with conflicts] Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-18Merge branch 'topic/kbuild-fixes-for-next' of ↵Linus Torvalds3-20/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media build fixes from Mauro Carvalho Chehab: "A series of patches that fix compilation on non-x86 archs. While most of them are just build fixes, there are some fixes for real bugs, as there are a number of drivers using dynamic stack allocation. A few of those might be considered a security risk, if the i2c-dev module is loaded, as someone could be sending very long I2C data that could potentially overflow the Kernel stack. Ok, as using /dev/i2c-* devnodes usually requires root on usual distros, and exploiting it would require a DVB board or USB stick, the risk is not high" * 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (28 commits) [media] platform drivers: Fix build on frv arch [media] lirc_zilog: Don't use dynamic static allocation [media] mxl111sf: Don't use dynamic static allocation [media] af9035: Don't use dynamic static allocation [media] af9015: Don't use dynamic static allocation [media] dw2102: Don't use dynamic static allocation [media] dibusb-common: Don't use dynamic static allocation [media] cxusb: Don't use dynamic static allocation [media] v4l2-async: Don't use dynamic static allocation [media] cimax2: Don't use dynamic static allocation [media] tuner-xc2028: Don't use dynamic static allocation [media] tuners: Don't use dynamic static allocation [media] av7110_hw: Don't use dynamic static allocation [media] stv090x: Don't use dynamic static allocation [media] stv0367: Don't use dynamic static allocation [media] stb0899_drv: Don't use dynamic static allocation [media] dvb-frontends: Don't use dynamic static allocation [media] dvb-frontends: Don't use dynamic static allocation [media] s5h1420: Don't use dynamic static allocation [media] uvc/lirc_serial: Fix some warnings on parisc arch ...
2013-11-18Merge branch 'v4l_for_linus' of ↵Linus Torvalds6-3/+409
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series include: - a new Remote Controller driver for ST SoC with the corresponding DT bindings - a new frontend (cx24117) - a new I2C camera flash driver (lm3560) - a new mem2mem driver for TI SoC (ti-vpe) - support for Raphael r828d added to r820t driver - some improvements on buffer allocation at VB2 core - usual driver fixes and improvements PS this time, we have a smaller number of patches. While it is hard to pinpoint to the reasons, I believe that it is mainly due to: 1) there are several patch series ready, but depending on DT review. I decided to grant some extra time for DT maintainers to look on it, as they're expecting to have more time with the changes agreed during ARM mini-summit and KS. If they can't review in time for 3.14, I'll review myself and apply for the next merge window. 2) I suspect that having both LinuxCon EU and LinuxCon NA happening during the same merge window affected the development productivity, as several core media developers participated on both events" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits) [media] media: st-rc: Add ST remote control driver [media] gpio-ir-recv: Include linux/of.h header [media] tvp7002: Include linux/of.h header [media] tvp514x: Include linux/of.h header [media] ths8200: Include linux/of.h header [media] adv7343: Include linux/of.h header [media] v4l: Fix typo in v4l2_subdev_get_try_crop() [media] media: i2c: add driver for dual LED Flash, lm3560 [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2 [media] rtl28xxu: add RTL2832P + R828D support [media] rtl2832: add new tuner R828D [media] r820t: add support for R828D [media] media/i2c: ths8200: fix build failure with gcc 4.5.4 [media] Add support for KWorld UB435-Q V2 [media] staging/media: fix msi3101 build errors [media] ddbridge: Remove casting the return value which is a void pointer [media] ngene: Remove casting the return value which is a void pointer [media] dm1105: remove unneeded not-null test [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED [media] media: rcar_vin: Add preliminary r8a7790 support ...
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang1-1/+1
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-08[media] rc: Fir warnings on m68k archMauro Carvalho Chehab2-4/+4
Fix the following warnings: drivers/media/rc/fintek-cir.c: In function 'fintek_cr_write': drivers/media/rc/fintek-cir.c:45:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/fintek-cir.c:46:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/fintek-cir.c: In function 'fintek_cr_read': drivers/media/rc/fintek-cir.c:54:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/fintek-cir.c:55:8: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/fintek-cir.c: In function 'fintek_config_mode_enable': drivers/media/rc/fintek-cir.c:80:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/fintek-cir.c:81:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/fintek-cir.c: In function 'fintek_config_mode_disable': drivers/media/rc/fintek-cir.c:87:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c: In function 'nvt_cr_write': drivers/media/rc/nuvoton-cir.c:45:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c:46:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c: In function 'nvt_cr_read': drivers/media/rc/nuvoton-cir.c:52:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c:53:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c: In function 'nvt_efm_enable': drivers/media/rc/nuvoton-cir.c:74:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c:75:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c: In function 'nvt_efm_disable': drivers/media/rc/nuvoton-cir.c:81:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c: In function 'nvt_select_logical_dev': drivers/media/rc/nuvoton-cir.c:91:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/media/rc/nuvoton-cir.c:92:2: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Those are caused because the I/O port is u32, instead of u8. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-07[media] iguanair: simplify calculation of carrier delay cyclesSean Young1-16/+6
Simplify the logic that calculates the carrier, and removes a warning on avr32 arch: drivers/media/rc/iguanair.c: In function 'iguanair_set_tx_carrier': drivers/media/rc/iguanair.c:304: warning: 'sevens' may be used uninitialized in this function Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31[media] media: st-rc: Add ST remote control driverSrinivas Kandagatla3-0/+406
This patch adds support to ST RC driver, which is basically a IR/UHF receiver and transmitter. This IP (IRB) is common across all the ST parts for settop box platforms. IRB is embedded in ST COMMS IP block. It supports both Rx & Tx functionality. This driver adds only Rx functionality via LIRC codec. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31[media] gpio-ir-recv: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17[media] winbond-cir: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: David Härdeman <david@hardeman.nu> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-17[media] ir-rx51: remove deprecated IRQF_DISABLEDMichael Opdenacker1-2/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-14treewide: Fix common typo in "identify"Maxime Jayat2-2/+2
Correct common misspelling of "identify" as "indentify" throughout the kernel Signed-off-by: Maxime Jayat <maxime@artisandeveloppeur.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-23[media] media: rc: rdev->open or rdev->close can be NULLJuergen Lock1-2/+2
At least technisat-usb2.c doesn't set these... Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-22[media] winbond: wire up rc feedback ledSean Young2-33/+6
Note that with the rc-feedback trigger, the cir-rx trigger is now redundant. The cir-tx trigger is not used by default; if this functionality is desired then it should exist in rc-core, not in a driver. Also make sure that the led is suspended on suspend. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-22[media] ttusbir: wire up rc feedback ledSean Young1-0/+1
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-22[media] redrat3: wire up rc feedback ledSean Young2-3/+82
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-22[media] rc: add feedback led trigger for rc keypressesSean Young1-0/+6
Many devices with an ir receiver also have a feedback led. Add the led trigger to support this. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-22[media] redrat3: ensure whole packet is readSean Young1-1/+2
The length in the header excludes the header itself, so we're getting spurious readings. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-31[media] media: lirc: Allow lirc dev to talk to rc deviceSrinivas Kandagatla2-0/+11
The use case is simple, if any rc device has allowed protocols = RC_TYPE_LIRC and map_name = RC_MAP_LIRC set, the driver open will be never called. The reason for this is, all of the key maps except lirc have some KEYS in there map, so during rc_register_device process these keys are matched against the input drivers and open is performed, so for the case of RC_MAP_EMPTY, a vt/keyboard is matched and the driver open is performed. In case of lirc, there is no match and result is that there is no open performed, however the lirc-dev will go ahead and create a /dev/lirc0 node. Now when lircd/mode2 opens this device, no data is available because the driver was never opened. Other case pointed by Sean Young, As rc device gets opened via the input interface. If the input device is never opened (e.g. embedded with no console) then the rc open is never called and lirc will not work either. So that's another case. lirc_dev seems to have no link with actual rc device w.r.t open/close. This patch adds rc_dev pointer to lirc_driver structure for cases like this, so that it can do the open/close of the real driver in accordance to lircd/mode2 open/close. Without this patch its impossible to open a rc device which has RC_TYPE_LIRC ad RC_MAP_LIRC set. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-31[media] media: rc: Add rc_open/close and use count to rc_devSrinivas Kandagatla1-4/+42
This patch adds user count to rc_dev structure, the reason to add this new member is to allow other code like lirc to open rc device directly. In the existing code, rc device is only opened by input subsystem which works ok if we have any input drivers to match. But in case like lirc where there will be no input driver, rc device will be never opened. Having this user count variable will be usefull to allow rc device to be opened from code other than rc-main. This patch also adds rc_open and rc_close functions for other drivers like lirc to open and close rc devices. This functions safely increment and decrement the user count. Other driver wanting to open rc device should call rc_open and rc_close, rather than directly modifying the rc_dev structure. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30[media] lirc: make transmit interface consistentSean Young2-5/+6
All lirc drivers that can transmit, return EINVAL when they are passed more than IR data than they can send. That is, except for two drivers which I touched. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30[media] lirc: validate transmission ir dataSean Young1-1/+10
The lirc interface allows 255 u32 spaces and pulses, which are usec. If the driver can handle this (e.g. winbond-cir) you can produce hours of meaningless IR data and there is no method of interrupting it. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30[media] redrat3: errors on unplugSean Young1-27/+0
In an usb disconnect handler, the urbs have already been cancelled so the attempt to disable the IR receiver just results in errors: [ 899.638862] redrat3 7-2:1.0: redrat3_send_cmd: Error sending rr3 cmd res -110, data 0 [ 899.638870] redrat3 7-2:1.0: redrat3_disable_detector: detector status: 251, should be 0 Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-29[media] ene_ir: don't use pr_debug after allMaxim Levitsky1-1/+1
This way to only way to get debug info is to use dynamic debug, but I left debugging prints to debug hardware issues, and so I want this to be enabled by module param. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-29[media] ene_ir: disable the device if wake is disabledMaxim Levitsky1-7/+20
It doesn't hurt and on my notebook despite clearing the wake flag the remote still wakes up the system. This way it doesn't. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-29[media] ene_ir: Fix interrupt line passthrough to hardwareMaxim Levitsky1-1/+2
While we can delay IRQ intialization, we need the interrupt number right away because unusually hardware have programable interrupt number, and thus we give it the number that was allocated by BIOS Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-05-27[media] rc: gpio-ir-recv: Remove redundant platform_set_drvdata()Sachin Kamat1-2/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] rc: Add rc-delock-61959Jakob Haufe2-0/+84
This adds the keytable for the remote that comes with the Delock 61959. NEC protocol with address 0x866b. Signed-off-by: Jakob Haufe <sur5r@sur5r.net> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-23[media] media/rc/imon.c: kill urb when send_packet() is interruptedKevin Baradon1-1/+3
This avoids: Apr 12 23:52:16 homeserver kernel: imon:send_packet: task interrupted Apr 12 23:52:16 homeserver kernel: ------------[ cut here ]------------ Apr 12 23:52:16 homeserver kernel: WARNING: at drivers/usb/core/urb.c:327 usb_submit_urb+0x353/0x370() Apr 12 23:52:16 homeserver kernel: Hardware name: Unknow Apr 12 23:52:16 homeserver kernel: URB f64b6f00 submitted while active Apr 12 23:52:16 homeserver kernel: Modules linked in: Apr 12 23:52:16 homeserver kernel: Pid: 3154, comm: LCDd Not tainted 3.8.6-htpc-00005-g9e6fc5e #26 Apr 12 23:52:16 homeserver kernel: Call Trace: Apr 12 23:52:16 homeserver kernel: [<c012d778>] ? warn_slowpath_common+0x78/0xb0 Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370 Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370 Apr 12 23:52:16 homeserver kernel: [<c0447010>] ? imon_ir_change_protocol+0x150/0x150 Apr 12 23:52:16 homeserver kernel: [<c012d843>] ? warn_slowpath_fmt+0x33/0x40 Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370 Apr 12 23:52:16 homeserver kernel: [<c0446c67>] ? send_packet+0x97/0x270 Apr 12 23:52:16 homeserver kernel: [<c0446cfe>] ? send_packet+0x12e/0x270 Apr 12 23:52:16 homeserver kernel: [<c05c5743>] ? do_nanosleep+0xa3/0xd0 Apr 12 23:52:16 homeserver kernel: [<c044760e>] ? vfd_write+0xae/0x250 Apr 12 23:52:16 homeserver kernel: [<c0447560>] ? lcd_write+0x180/0x180 Apr 12 23:52:16 homeserver kernel: [<c01b2b19>] ? vfs_write+0x89/0x140 Apr 12 23:52:16 homeserver kernel: [<c01b2dda>] ? sys_write+0x4a/0x90 Apr 12 23:52:16 homeserver kernel: [<c05c7c45>] ? sysenter_do_call+0x12/0x26 Apr 12 23:52:16 homeserver kernel: ---[ end trace a0b6f0fcfd2f9a1d ]--- Apr 12 23:52:16 homeserver kernel: imon:send_packet: error submitting urb(-16) Apr 12 23:52:16 homeserver kernel: imon:vfd_write: send packet #3 failed Apr 12 23:52:16 homeserver kernel: imon:send_packet: error submitting urb(-16) Apr 12 23:52:16 homeserver kernel: imon:vfd_write: send packet #0 failed Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-23[media] media/rc/imon.c: do not try to register 2nd intf if 1st intf failedKevin Baradon1-1/+8
This bug could be triggered if 1st interface configuration fails: Apr 8 18:20:30 homeserver kernel: usb 5-1: new low-speed USB device number 2 using ohci_hcd Apr 8 18:20:30 homeserver kernel: input: iMON Panel, Knob and Mouse(15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input2 Apr 8 18:20:30 homeserver kernel: Registered IR keymap rc-imon-pad Apr 8 18:20:30 homeserver kernel: input: iMON Remote (15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/rc/rc0/input3 Apr 8 18:20:30 homeserver kernel: rc0: iMON Remote (15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/rc/rc0 Apr 8 18:20:30 homeserver kernel: imon:send_packet: packet tx failed (-32) Apr 8 18:20:30 homeserver kernel: imon 5-1:1.0: remote input dev register failed Apr 8 18:20:30 homeserver kernel: imon 5-1:1.0: imon_init_intf0: rc device setup failed Apr 8 18:20:30 homeserver kernel: imon 5-1:1.0: unable to initialize intf0, err 0 Apr 8 18:20:30 homeserver kernel: imon:imon_probe: failed to initialize context! Apr 8 18:20:30 homeserver kernel: imon 5-1:1.0: unable to register, err -19 Apr 8 18:20:30 homeserver kernel: BUG: unable to handle kernel NULL pointer dereference at 00000014 Apr 8 18:20:30 homeserver kernel: IP: [<c05c4e4c>] mutex_lock+0xc/0x30 Apr 8 18:20:30 homeserver kernel: *pde = 00000000 Apr 8 18:20:30 homeserver kernel: Oops: 0002 [#1] PREEMPT SMP Apr 8 18:20:30 homeserver kernel: Modules linked in: Apr 8 18:20:30 homeserver kernel: Pid: 367, comm: khubd Not tainted 3.8.3-htpc-00002-g79b1403 #23 Unknow Unknow/RS780-SB700 Apr 8 18:20:30 homeserver kernel: EIP: 0060:[<c05c4e4c>] EFLAGS: 00010296 CPU: 1 Apr 8 18:20:30 homeserver kernel: EIP is at mutex_lock+0xc/0x30 Apr 8 18:20:30 homeserver kernel: EAX: 00000014 EBX: 00000014 ECX: 00000000 EDX: f590e480 Apr 8 18:20:30 homeserver kernel: ESI: f5deac00 EDI: f590e480 EBP: f5f3ee00 ESP: f6577c28 Apr 8 18:20:30 homeserver kernel: DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Apr 8 18:20:30 homeserver kernel: CR0: 8005003b CR2: 00000014 CR3: 0081b000 CR4: 000007d0 Apr 8 18:20:30 homeserver kernel: DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 Apr 8 18:20:30 homeserver kernel: DR6: ffff0ff0 DR7: 00000400 Apr 8 18:20:30 homeserver kernel: Process khubd (pid: 367, ti=f6576000 task=f649ea00 task.ti=f6576000) Apr 8 18:20:30 homeserver kernel: Stack: Apr 8 18:20:30 homeserver kernel: 00000000 f5deac00 c0448de4 f59714c0 f5deac64 c03b8ad2 f6577c90 00000004 Apr 8 18:20:30 homeserver kernel: f649ea00 c0205142 f6779820 a1ff7f08 f5deac00 00000001 f5f3ee1c 00000014 Apr 8 18:20:30 homeserver kernel: 00000004 00000202 15c20036 c07a03e8 fffee0ca f6795c00 f5f3ee1c f5deac00 Apr 8 18:20:30 homeserver kernel: Call Trace: Apr 8 18:20:30 homeserver kernel: [<c0448de4>] ? imon_probe+0x494/0xde0 Apr 8 18:20:30 homeserver kernel: [<c03b8ad2>] ? rpm_resume+0xb2/0x4f0 Apr 8 18:20:30 homeserver kernel: [<c0205142>] ? sysfs_addrm_finish+0x12/0x90 Apr 8 18:20:30 homeserver kernel: [<c04170e9>] ? usb_probe_interface+0x169/0x240 Apr 8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80 Apr 8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80 Apr 8 18:20:30 homeserver kernel: [<c03b0a94>] ? driver_probe_device+0x54/0x1e0 Apr 8 18:20:30 homeserver kernel: [<c0416abe>] ? usb_device_match+0x4e/0x80 Apr 8 18:20:30 homeserver kernel: [<c03af314>] ? bus_for_each_drv+0x34/0x70 Apr 8 18:20:30 homeserver kernel: [<c03b0a0b>] ? device_attach+0x7b/0x90 Apr 8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80 Apr 8 18:20:30 homeserver kernel: [<c03b00ff>] ? bus_probe_device+0x5f/0x80 Apr 8 18:20:30 homeserver kernel: [<c03aeab7>] ? device_add+0x567/0x610 Apr 8 18:20:30 homeserver kernel: [<c041a7bc>] ? usb_create_ep_devs+0x7c/0xd0 Apr 8 18:20:30 homeserver kernel: [<c0413837>] ? create_intf_ep_devs+0x47/0x70 Apr 8 18:20:30 homeserver kernel: [<c04156c4>] ? usb_set_configuration+0x454/0x750 Apr 8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80 Apr 8 18:20:30 homeserver kernel: [<c041de8a>] ? generic_probe+0x2a/0x80 Apr 8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80 Apr 8 18:20:30 homeserver kernel: [<c0205aff>] ? sysfs_create_link+0xf/0x20 Apr 8 18:20:30 homeserver kernel: [<c04171db>] ? usb_probe_device+0x1b/0x40 Apr 8 18:20:30 homeserver kernel: [<c03b0a94>] ? driver_probe_device+0x54/0x1e0 Apr 8 18:20:30 homeserver kernel: [<c03af314>] ? bus_for_each_drv+0x34/0x70 Apr 8 18:20:30 homeserver kernel: [<c03b0a0b>] ? device_attach+0x7b/0x90 Apr 8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80 Apr 8 18:20:30 homeserver kernel: [<c03b00ff>] ? bus_probe_device+0x5f/0x80 Apr 8 18:20:30 homeserver kernel: [<c03aeab7>] ? device_add+0x567/0x610 Apr 8 18:20:30 homeserver kernel: [<c040e6df>] ? usb_new_device+0x12f/0x1e0 Apr 8 18:20:30 homeserver kernel: [<c040f4d8>] ? hub_thread+0x458/0x1230 Apr 8 18:20:30 homeserver kernel: [<c015554f>] ? dequeue_task_fair+0x9f/0xc0 Apr 8 18:20:30 homeserver kernel: [<c0131312>] ? release_task+0x1d2/0x330 Apr 8 18:20:30 homeserver kernel: [<c01477b0>] ? abort_exclusive_wait+0x90/0x90 Apr 8 18:20:30 homeserver kernel: [<c040f080>] ? usb_remote_wakeup+0x40/0x40 Apr 8 18:20:30 homeserver kernel: [<c0146ed2>] ? kthread+0x92/0xa0 Apr 8 18:20:30 homeserver kernel: [<c05c7877>] ? ret_from_kernel_thread+0x1b/0x28 Apr 8 18:20:30 homeserver kernel: [<c0146e40>] ? kthread_freezable_should_stop+0x50/0x50 Apr 8 18:20:30 homeserver kernel: Code: 89 04 24 89 f0 e8 05 ff ff ff 8b 5c 24 24 8b 74 24 28 8b 7c 24 2c 8b 6c 24 30 83 c4 34 c3 00 83 ec 08 89 1c 24 89 74 24 04 89 c3 <f0> ff 08 79 05 e8 ca 03 00 00 64 a1 70 d6 80 c0 8b 74 24 04 89 Apr 8 18:20:30 homeserver kernel: EIP: [<c05c4e4c>] mutex_lock+0xc/0x30 SS:ESP 0068:f6577c28 Apr 8 18:20:30 homeserver kernel: CR2: 0000000000000014 Apr 8 18:20:30 homeserver kernel: ---[ end trace df134132c967205c ]--- Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-23[media] imon: Use large delays earlierKevin Baradon1-6/+7
send_packet() is used during initialization, before send_packet_delay is set. So, move ictx->send_packet_delay to happen earlier. [mchehab@redhat.com: fold two patches into one to make git history clearer] Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] mceusb: add some missing cmd sizesWilliam Steidtmann1-2/+9
Fix mceusb_cmdsize() which returns incorrect datasize=0 for sub-commands MCE_RSP_GETPORTSTATUS, MCE_RSP_GETWAKESOURCE, MCE_RSP_EQDEVDETAILS, MCE_RSP_EQEMVER, and MCE_RSP_EQIRNUMPORTS. While here, change mceusb_cmdsize() name to reflect that it returns data size not cmd size. Signed-off-by: William Steidtmann <billstei@hbci.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: fix single line indentation of keymaps/MakefileAntti Palosaari1-1/+1
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: add rc-reddoAntti Palosaari2-0/+87
It is very similar than rc-msi-digivox-iii but new keytable is needed as there is one existing scancode mapped to different button. Also that one has less buttons. NEC extended protocol with address 0x61d6. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: ene_ir: fix potential double free in ene_probe()Wei Yongjun1-0/+1
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: nuvoton-cir: fix potential double free in nvt_probe()Wei Yongjun1-0/+1
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: ite-cir: fix potential double free in ite_probe()Wei Yongjun1-0/+1
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] rc: winbond-cir: fix potential double free in wbcir_probe()Wei Yongjun1-0/+1
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-09constify a bunch of struct file_operations instancesAl Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-08[media] MEDIA: ttusbir, fix double freeJiri Slaby1-0/+1
rc_unregister_device already calls rc_free_device to free the passed device. But in one of ttusbir's probe fail paths, we call rc_unregister_device _and_ rc_free_device. This is wrong and results in a double free. Instead, set rc to NULL resulting in rc_free_device being a noop. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-01Merge tag 'v3.9-rc5' into patchworkMauro Carvalho Chehab1-1/+1
Linux 3.9-rc5 * tag 'v3.9-rc5': (1080 commits) Linux 3.9-rc5 Revert "lockdep: check that no locks held at freeze time" dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function PNP: List Rafael Wysocki as a maintainer rbd: don't zero-fill non-image object requests ia64 idle: delete stale (*idle)() function pointer Btrfs: don't drop path when printing out tree errors in scrub target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit Revert "mm: introduce VM_POPULATE flag to better deal with racy userspace programs" usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD mg_disk: fix error return code in mg_probe() Btrfs: fix wrong return value of btrfs_lookup_csum() Btrfs: fix wrong reservation of csums Btrfs: fix double free in the btrfs_qgroup_account_ref() Btrfs: limit the global reserve to 512mb Btrfs: hold the ordered operations mutex when waiting on ordered extents Btrfs: fix space accounting for unlink and rename Btrfs: fix space leak when we fail to reserve metadata space ...
2013-03-23[media] rc-core: don't treat dev->rc_map.rc_type as a bitmapDavid Härdeman12-38/+25
store_protocols() treats dev->rc_map.rc_type as a bitmap which is wrong for two reasons. First of all, it is pretty bogus to change the protocol type of the keymap just because the hardware has been asked to decode a different protocol. Second, dev->rc_map.rc_type is an enum (i.e. a single protocol) as pointed out by James Hogan <james.hogan@imgtec.com>. Fix both issues by introducing a separate enabled_protocols member to struct rc_dev. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media/rc/imon.c: avoid flooding syslog with "unknown keypress" when ↵Kevin Baradon1-11/+0
keypad is pressed My 15c2:0036 device floods syslog when a keypad key is pressed: Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fef2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 This patch removes those messages from imon, following suggestion from Mauro. Unknown keys shall be correctly handled by rc/input layer. Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media/rc/imon.c: make send_packet() delay larger for 15c2:0036Kevin Baradon1-4/+13
Some imon devices (like 15c2:0036) need a higher delay between send_packet calls. Default value is still 5ms to avoid regressions on already working hardware. Also use interruptible wait to avoid load average going too high (and let caller handle signals). Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 01:38:54 +0000