summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/vsp1/vsp1_hsit.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-14media: platform: place Renesas drivers on a separate dirMauro Carvalho Chehab1-178/+0
In order to cleanup the main platform media directory, move Renesas driver to its own directory. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen1-6/+8
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-03-18media: vsp1: Add vsp1_dl_list argument to .configure_stream() operationLaurent Pinchart1-0/+1
The WPF needs access to the current display list to configure writeback. Add a display list pointer to the VSP1 entity .configure_stream() operation. Only display pipelines can make use of the display list there as mem-to-mem pipelines don't have access to a display list at stream configuration time. This is not an issue as writeback is only used for display pipelines. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-25media: vsp1: Adapt entities to configure into a bodyKieran Bingham1-5/+5
Currently the entities store their configurations into a display list. Adapt this such that the code can be configured into a body directly, allowing greater flexibility and control of the content. All users of vsp1_dl_list_write() are removed in this process, thus it too is removed. A helper, vsp1_dl_list_get_body0() is provided to access the internal body0 from the display list. [laurent.pinchart+renesas@ideasonboard.com: Don't remove blank line unnecessarily] Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-25media: vsp1: Refactor display list configure operationsKieran Bingham1-8/+4
The entities provide a single .configure operation which configures the object into the target display list, based on the vsp1_entity_params selection. Split the configure function into three parts, '.configure_stream()', '.configure_frame()', and '.configure_partition()' to facilitate splitting the configuration of each parameter class into separate display list bodies. [laurent.pinchart+renesas@ideasonboard.com: Blank line reformatting, remote unneeded local variable initialization] Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-17media: v4l: vsp1: Use SPDX license headersLaurent Pinchart1-5/+1
Adopt the SPDX license identifier headers to ease license compliance management. All files in the driver are licensed under the GPLv2+ except for the vsp1_regs.h file which is licensed under the GPLv2. This is likely an oversight, but fixing this requires contacting the copyright owners and is out of scope for this patch. While at it fix the file descriptions to match file names where copy and paste error occurred. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2017-04-10[media] v4l: vsp1: Fix multi-line comment styleLaurent Pinchart1-1/+2
Fix all multi-line comments to comply with the kernel coding style. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19[media] v4l: vsp1: Pass parameter type to entity configuration operationLaurent Pinchart1-2/+3
Replace the current boolean parameter (full / !full) with an explicit enum. - VSP1_ENTITY_PARAMS_INIT for parameters to be configured at pipeline initialization time only (V4L2 stream on or DRM atomic update) - VSP1_ENTITY_PARAMS_RUNTIME for all parameters that can be freely modified at runtime (through V4L2 controls) This will allow future extensions when implementing image partitioning support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19[media] v4l: vsp1: Protect against race conditions between get and set formatLaurent Pinchart1-4/+11
The subdev userspace API isn't serialized in the core, serialize access to formats and selection rectangles in the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28[media] v4l: vsp1: Support runtime modification of controlsLaurent Pinchart1-1/+4
Controls are applied to the hardware in the configure operation of the VSP entities, which is only called when starting the video stream. To enable runtime modification of controls we need to call the configure operations for every frame. Doing so is currently not safe, as most parameters shouldn't be modified during streaming. Furthermore the configure operation can sleep, preventing it from being called from the frame completion interrupt handler for the next frame. Fix this by adding an argument to the configure operation to tell entities whether to perform a full configuration (as done now) or a partial runtime configuration. In the latter case the operation will only configure the subset of parameters related to runtime-configurable controls, and won't be allowed to sleep when doing so. Because partial reconfiguration can depend on parameters computed when performing a full configuration, the core guarantees that the configure operation will always be called with full and partial modes in that order at stream start. Entities thus don't have to duplicate configuration steps in the full and partial code paths. This change affects the VSP driver core only, all entities return immediately from the configure operation when called for a partial runtime configuration. Entities will be modified one by one in further commits. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28[media] v4l: vsp1: Set entities functionsLaurent Pinchart1-2/+3
Initialize the function field of all subdev entities instantiated by the driver. This gets rids of multiple warnings printed by the media controller core. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28[media] v4l: vsp1: Constify operation structuresLaurent Pinchart1-2/+2
The structures are never modified, make them const. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-04-13[media] v4l: vsp1: Factorize frame size enumeration codeLaurent Pinchart1-29/+3
Most of the entities can't perform scaling and implement the same frame size enumeration function. Factorize the code into a single implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Factorize get pad format codeLaurent Pinchart1-18/+1
All entities implement the same get pad format handler, factorize it into a common function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Pass pipe pointer to entity configure functionsLaurent Pinchart1-1/+3
Pass the pipe explicitly instead of retrieving it through media entities. This decouples device state stored in the pipeline from the active state stored in entities, preparing for dynamic pipeline creation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Pass display list explicitly to configure functionsLaurent Pinchart1-5/+7
Modules write register values to the active display list pointed to by the pipeline. In order to support preparing display lists ahead of time, pass them explicitly to all configuration functions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Create a new configure operation to setup modulesLaurent Pinchart1-29/+21
The subdev s_stream operation is abused as a generic way to setup modules at every frame. Move the code out to a new VSP1 entity configure operation. Most modules now have an empty s_stream operation that can be removed. The only exception is the WPF module that needs to perform hardware configuration when stopping the stream. The code can be simplified accordingly as we know that that operation never fails. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Store active formats in a pad config structureLaurent Pinchart1-8/+21
Add a pad config structure field to the vsp1_entity structure and use it to store all active pad formats. This generalizes the code to operate on pad config structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Implement and use the subdev pad::init_cfg configurationLaurent Pinchart1-0/+1
Turn the custom formats initialization function into a standard pad::init_cfg handler and use it in subdevs instead of initializing formats in the subdev open handler. This makes the subdev open handler empty, so remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Move subdev initialization code to vsp1_entity_init()Laurent Pinchart1-15/+2
Don't duplicate the code in every module driver, centralize it in a single place. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-13[media] v4l: vsp1: Enable display list support for the HS[IT], LUT, SRU and UDSLaurent Pinchart1-1/+1
Those modules were left out of display list integration as they're not used by the DRM pipeline. To prepare for display list support in non-DRM pipelines use the module write API to set registers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19[media] v4l: vsp1: Don't validate links when the userspace API is disabledLaurent Pinchart1-1/+1
As the pipeline is configured internally by the driver when the userspace API is disabled its configuration can be trusted and link validation isn't needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23[media] v4l2-subdev: add support for the new enum_frame_size 'which' fieldHans Verkuil1-1/+3
Support the new 'which' field in the enum_frame_size ops. Most drivers do not need to be changed since they always returns the same enumeration regardless of the 'which' field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_configHans Verkuil1-8/+8
If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] media: platform: vsp1: vsp1_hsit: Remove unused functionRickard Strandqvist1-5/+0
Remove the function vsp1_hsit_read() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] platform: Make use of media_bus_format enumBoris BREZILLON1-6/+6
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Reference new definitions in all platform drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-04-23[media] v4l: vsp1: Support multi-input entitiesLaurent Pinchart1-5/+2
Rework the route configuration code to support entities with multiple sink pads. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-11[media] v4l: vsp1: Add HST and HSI supportLaurent Pinchart1-0/+222
The Hue Saturation value Transform and Hue Saturation value Inverse transform entities convert from RGB to HSV and back. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-15 16:16:55 +0000