summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/coda
AgeCommit message (Collapse)AuthorFilesLines
2015-08-11[media] coda: drop zero payload bitstream buffersZahari Doychev1-0/+7
The buffers with zero payload are now dumped in coda_fill_bitstream and not passed to coda_bitstream_queue. This avoids unnecessary fifo addition and buffer sequence counter increment. Signed-off-by: Zahari Doychev <zahari.doychev@linux.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: make NV12 format defaultPhilipp Zabel1-14/+14
The chroma interleaved NV12 format has higher memory bandwidth efficiency because the chroma planes can be read/written with longer burst lengths. Use NV12 as default format if available and consistently sort it first. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: add macroblock tiling supportPhilipp Zabel6-70/+221
Storing internal frames in macroblock tiled order improves memory access patterns by allowing increased burst sizes when transferring the uncompressed macroblocks to or from main memory. The translation logic only supports a single chroma base address, so this is only supported for the chroma interleaved NV12 format. Since the rotator used to copy the decoder output into the v4l2 capture buffers does not seem to support the tiled format correctly, only enable it in the encoder for now. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: move cache setup into coda9_set_frame_cache, also use it in ↵Philipp Zabel1-20/+25
start_encoding The frame cache should be set up correctly to encode NV12 source frames. This was not done before, so move the cache setup out of start_decoding into its own function and call it from both start_encoding and start_decoding. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: Use S_PARM to set nominal framerate for h.264 encoderPhilipp Zabel2-0/+106
The encoder needs to know the nominal framerate for the constant bitrate control mechanism to work. Currently the only way to set the framerate is by using VIDIOC_S_PARM on the output queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: implement VBV delay and buffer size controlsPhilipp Zabel3-1/+20
The encoder allows to specify the VBV model reference decoder's initial delay and buffer size. Export the corresponding V4L2 controls. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: reset CODA960 hardware after sequence endPhilipp Zabel1-0/+8
On i.MX6, sometimes after decoding a stream, encoding will produce macroblock errors caused by missing 8-byte sequences in the output stream. Until the cause for this is found, reset the hardware after sequence end, which seems to help. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: rework meta counting and add separate lockPhilipp Zabel3-14/+25
Keep count of number of buffer meta structures in the list and use a separate spinlock for operations on this counted list instead of reusing the bitstream mutex in some places and none at all in others. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: reuse src_bufs in coda_job_readyPhilipp Zabel1-8/+5
The v4l2_m2m_num_src_bufs_ready() function is called in multiple places in coda_cob_ready, and there already is a variable src_bufs that is assigned to its result. Move it to the beginning and use it everywhere. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: use event class to deduplicate v4l2 trace eventsPhilipp Zabel2-65/+26
Trace events with exactly the same parameters and trace output, such as coda_enc_pic_run and coda_enc_pic_done, are supposed to use the DECLARE_EVENT_CLASS and DEFINE_EVENT macros instead of duplicated TRACE_EVENT macro calls. This patch changes the order of parameters to coda_dec_rot_done and adds a timestamp so it can share an event class with coda_bit_queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: drop custom list of pixel format descriptionsPhilipp Zabel1-68/+7
Since commit ba3002045f80 ("[media] v4l2-ioctl: fill in the description for VIDIOC_ENUM_FMT"), all pixel formats are assigned their description in a central place. We can now drop the custom list. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: reset stream end in stop_streamingPhilipp Zabel1-0/+3
Otherwise a restarted stream won't queue buffers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: avoid calling SEQ_END twicePhilipp Zabel2-3/+9
Allow coda_seq_end_work to be called multiple times, move the setting of ctx->initialized from coda_start/stop_streaming() into coda_start_encoding/decoding and coda_seq_end_work, respectively, and skip the SEQ_END command in coda_seq_end_work if the context is already deinitialized before. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: keep buffers on the queue in bitstream end modePhilipp Zabel1-0/+3
In stream end mode the hardware will read the bitstream to its end, overshooting the write pointer. Do not write additional data into the bitstream in this mode. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: fix bitstream preloading for MPEG4 decodingPhilipp Zabel1-3/+1
All decoder instances using the BIT processor should preload buffers into the bitstream ring buffer, including MPEG4 decoding. Fix this by explicitly stating the above condition instead of listing all relevant input formats. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: fix mvcol buffer for MPEG4 decodingPhilipp Zabel1-1/+1
The mvcol buffer is allocated at the end of the first internal buffer. This patch fixes an out of bounds array access. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] coda: clamp frame sequence counters to 16 bitLucas Stach1-1/+8
This is already done for one side of the comparison with the expectation that the HW counter rolls over at the 16 bit boundary. This is true when decoding a h.264 stream, but doesn't hold for at least MJPEG. As we don't know the exact wrap-around point for this format just clamp the HW counter to the same 16 bits. This should be enough to detect most of the errors and saves us from doing different comparisons based on the decoded format. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-30genalloc: rename of_get_named_gen_pool() to of_gen_pool_get()Vladimir Zapolskiy1-1/+1
To be consistent with other kernel interface namings, rename of_get_named_gen_pool() to of_gen_pool_get(). In the original function name "_named" suffix references to a device tree property, which contains a phandle to a device and the corresponding device driver is assumed to register a gen_pool object. Due to a weak relation and to avoid any confusion (e.g. in future possible scenario if gen_pool objects are named) the suffix is removed. [sfr@canb.auug.org.au: crypto/marvell/cesa - fix up for of_get_named_gen_pool() rename] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30genalloc: rename dev_get_gen_pool() to gen_pool_get()Vladimir Zapolskiy1-1/+1
To be consistent with other genalloc interface namings, rename dev_get_gen_pool() to gen_pool_get(). The original omitted "dev_" prefix is removed, since it points to argument type of the function, and so it does not bring any useful information. [akpm@linux-foundation.org: update arch/arm/mach-socfpga/pm.c] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mark Brown <broonie@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alan Tull <atull@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-09[media] coda: remove extraneous TRACE_SYSTEM_STRINGArnd Bergmann1-2/+0
The coda tracing code causes lots of warnings like In file included from /git/arm-soc/include/trace/define_trace.h:90:0, from /git/arm-soc/drivers/media/platform/coda/trace.h:203, from /git/arm-soc/drivers/media/platform/coda/coda-bit.c:34: /git/arm-soc/include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined #define TRACE_SYSTEM_STRING __app(TRACE_SYSTEM_VAR,__trace_system_name) ^ In file included from /git/arm-soc/include/trace/define_trace.h:83:0, from /git/arm-soc/drivers/media/platform/coda/trace.h:203, from /git/arm-soc/drivers/media/platform/coda/coda-bit.c:34: /git/arm-soc/drivers/media/platform/coda/./trace.h:12:0: note: this is the location of the previous definition #define TRACE_SYSTEM_STRING __stringify(TRACE_SYSTEM) >From what I can tell, this is just the result of a bogus TRACE_SYSTEM_STRING definition, and removing that one makes the warnings go away. Fixes: 9a1a8f9953f ("[media] coda: Add tracing support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] coda: Set last buffer flag and fix EOS eventPhilipp Zabel3-18/+16
Setting the last buffer flag causes the videobuf2 core to return -EPIPE from DQBUF calls on the capture queue after the last buffer is dequeued. This patch also fixes the EOS event to conform to the specification. It now is sent right after the last buffer has been decoded instead of when the last buffer is dequeued. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: Add tracing supportPhilipp Zabel5-1/+234
This patch adds tracepoints to the coda driver that can be used together with the v4l2:v4l2_qbuf and v4l2:v4l2_dqbuf tracepoints to to follow video frames through the mem2mem device. For encoding with the BIT processor: coda:coda_enc_pic_run coda:coda_enc_pic_done For decoding with the BIT processor: coda:coda_bit_queue coda:coda_dec_pic_run coda:coda_dec_pic_done coda:coda_dec_rot_done Additionally, two low level tracepoints register whenever the BIT processor is started and returns: coda:coda_bit_run coda:coda_bit_done Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: drop dma_sync_single_for_device in coda_bitstream_queuePhilipp Zabel1-4/+0
Issuing a cache flush for the whole bitstream buffer is not optimal in the first place when only a part of it was written. But given that the buffer is mapped in writecombine mode, it is not needed at all. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Ian Molton <imolton@ad-holdings.co.uk> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: fix fill bitstream errors in nonstreaming casePhilipp Zabel3-8/+11
When queueing a buffer into the bitstream fails, it has to be requeued in the videobuf2 queue before streaming starts, but while streaming it should be returned to userspace with an error. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: call SEQ_END when the first queue is stoppedPhilipp Zabel1-1/+4
This allows to stop and restart the output queue to start a new sequence while keeping the capture queue running. Before, sequence end would only be issued if both output and capture queue were stopped and the sequence start issued when reenabling the output queue would fail. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: fail to start streaming if userspace set invalid formatsPhilipp Zabel1-1/+12
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: remove duplicate error messages for buffer allocationsPhilipp Zabel2-26/+7
coda_alloc_aux_buf already prints an error, no need to print duplicate error messages all over the place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: move parameter buffer in together with context buffer allocationPhilipp Zabel3-20/+20
The parameter buffer is a per-context buffer, so we can allocate and free it together with the other context buffers during REQBUFS. Since this was the last context buffer allocated in coda-common.c, we can now move coda_alloc_context_buf into coda-bit.c. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: allocate bitstream buffer from REQBUFS, size depends on the formatPhilipp Zabel3-50/+58
Allocating the bitstream buffer only when the format is set allows to guarantee that at least two frames fit into the bitstream buffer. For small frame sizes a smaller bitstream buffer can be allocated. Since the bitstream buffer size now depends on the format, replace CODA_MAX_FRAME_SIZE with ctx->bitstream.size where appropriate and remove the now unused constant. Since REQBUFS can be called multiple times, but the format can't be changed unless REQBUFS 0 was called before, we can just keep the allocated context and bitstream buffers if REQBUFS is called multiple times with a non-zero buffer count. [fixed a resource leak preventing repeatedly decoding] Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: allocate per-context buffers from REQBUFSPhilipp Zabel3-12/+66
Allocate the per-context buffers from REQBUFS instead in start_encoding or start_decoding. This allows to stop and start streaming independently of buffer (re)allocation Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: use strlcpy instead of snprintfPhilipp Zabel1-2/+1
There is no need to take the detour through a "%s" format string to create a copy of a string. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: bitstream payload is unsignedPhilipp Zabel1-1/+1
kfifo_len is unsigned int, return it as such. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: fix double call to debugfs_removePeter Seiderer1-1/+2
In coda_free_aux_buf() call debugfs_remove only if buffer entry is valid (and therfore dentry is valid), double protect by invalidating dentry value. Fixes erroneous prematurely dealloc of debugfs caused by incorrect reference count incrementing. Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: check kasprintf return value in coda_openPeter Seiderer1-0/+6
kasprintf might fail if free memory is low. Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: bitrate can only be set in kbps stepsPhilipp Zabel1-1/+1
We divide the bitrate by 1000 before writing it to the register. Communicate to userspace that the bitrate granularity is kbps. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-10[media] coda: set allow_zero_bytesused flag for vb2_queue_initKamil Debski1-0/+7
The coda driver interprets a buffer with bytesused equal to 0 as a special case indicating end-of-stream. After vb2: fix bytesused == 0 handling (8a75ffb) patch videobuf2 modified the value of bytesused if it was 0. The allow_zero_bytesused flag was added to videobuf2 to keep backward compatibility. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: simplify check in coda_buf_queuePhilipp Zabel1-2/+2
Now that the bitstream buffer is only allocated for the BIT decoder case, we can use bitstream.size to check for bitstream ringbuffer operation. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: allocate bitstream ringbuffer only for BIT decoderPhilipp Zabel1-1/+2
The BIT encoder does not use a per-context bitstream ringbuffer as it encodes directly into the videobuf2 capture queue's buffers. Avoid allocation of the bitstream ringbuffer for encoder contexts. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: add support for contexts that do not use the BIT processorPhilipp Zabel2-19/+24
In preparation for CODA9 JPEG support, allow contexts that control hardware units directly, without the BIT processor. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: free context buffers under buffer mutexPhilipp Zabel1-0/+2
Make sure the buffer_mutex lock is taken in coda_bit_release while coda_free_framebuffers and coda_free_context_buffers are called. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: make seq_end_work optionalPhilipp Zabel1-3/+5
In preparation for CODA9 JPEG support, which doesn't have to call SEQ_END on the BIT processor. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: switch BIT decoder source queue to vmallocPhilipp Zabel1-2/+4
Since we have to copy from input buffers into the bitstream ringbuffer with the CPU, there is no need for contiguous DMA buffers on the decoder input side. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: add coda_estimate_sizeimage and use it in set_defaultsPhilipp Zabel1-15/+23
Call coda_estimate_sizeimage from both try_fmt and set_defaults to avoid this v4l2-compliance warning on the h.264 decoder video device: G_FMT: 1920x1088, 32315559, 1, 1920, 1048576, 3, 0, 0, feedcafe TRY/S_FMT: 1920x1088, 32315559, 1, 1920, 3133440, 3, 0, 0, feedcafe fail: v4l2-test-formats.cpp(948): Video Capture: S_FMT(G_FMT) != G_FMT Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: don't ever use subsampling ping-pong buffers as reconstructed ↵Philipp Zabel1-1/+4
reference buffers On i.MX6, two subsampling ping-pong buffers are used for motion estimation and deblocking They should not be counted as framebuffers, or they will be also used to store reconstructed frames, causing visible artifacts in P-frames. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: issue seq_end_work during stop_streamingPhilipp Zabel1-0/+5
This patch queues seq_end_work and flushes the queue during stop_streaming and clears the ctx->initialized flag. This allows to start streaming again after stopping streaming without releasing the context. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: remove unused isequence, reset qsequence in stop_streamingPhilipp Zabel2-2/+1
The isequence counter is never used, qsequence counts the buffers queued into the bit decoder bitstream ringbuffer. It needs to be reset in stop_streaming. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: fix width validity check when starting to decodeMarkus Pargmann1-2/+3
Compare rounded up width to fit into bytesperline. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: clear RET_DEC_PIC_SUCCESS flag in prepare_decodePhilipp Zabel1-0/+3
To make sure a set RET_DEC_PIC_SUCCESS flag is not a leftover from a previous successful run, clear it in prepare_decode. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: initialize SRAM on probePhilipp Zabel1-0/+1
Zeroing the SRAM on probe helps with debugging SRAM contents. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] coda: properly clear f_cap in coda_s_fmt_vid_outPhilipp Zabel1-0/+1
Properly zero the structure on the stack before using it. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-21 14:51:09 +0000