summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/coda
AgeCommit message (Collapse)AuthorFilesLines
2019-06-24media: coda: lock capture queue wakeup against encoder stop commandPhilipp Zabel3-5/+27
Make sure that an encoder stop command running concurrently with an encoder finish_run always either flags the last returned buffer or wakes up the capture queue to signal the end of stream condition afterwards. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: flag the last encoded bufferPhilipp Zabel1-7/+9
Use the flagged last output buffer to also flag the corresponding capture buffer after encoding. This causes the end of stream event to be issued and the buffer to be dequeued with the last flag set. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: only wake up capture queue if no pending buffers to encodePhilipp Zabel1-8/+9
If there are no pending queued output buffers to be encoded, waking up the capture queue with -EPIPE signals end of stream. If there are pending buffers on the other hand, setting the V4L2_BUF_FLAG_LAST on the resulting encoded capture buffers is all that is needed. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: retire coda_buf_is_end_of_streamPhilipp Zabel1-11/+1
Using the output queue sequence counter to determine the last buffer to be encoded or decoded always was fragile at best. Now that we have the last buffer flag propagating from the output queue to the capture queue correctly, this is not needed anymore. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: mark the last output buffer on encoder stop commandPhilipp Zabel1-0/+5
Mark the last output buffer to be encoded. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: only set the stream end flags if there are no more pending ↵Philipp Zabel1-8/+12
output buffers If there are still queued output buffers pending to be copied into the bitstream ring buffer, setting the stream end flag should be deferred until the marked last output buffer is written into the bitstream ring buffer. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: mark the last output buffer on decoder stop commandPhilipp Zabel2-0/+9
Mark the last output buffer to be decoded and only copy pending queued output buffers into the bitstream ring buffer in the BIT processor decoder case. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: allow flagging last output buffer internallyPhilipp Zabel1-1/+19
Since V4L2_BUF_FLAG_LAST is a CAPTURE only flag, clear it from OUTPUT buffers in QBUF and DQBUF. This allows to use the flag internally to signal the last buffer to decode after a decoder stop command was issued. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: increment sequence offset for the last returned framePhilipp Zabel1-0/+3
If no more frames are decoded in bitstream end mode, and a previously decoded frame has been returned, the firmware still increments the frame number. To avoid a sequence number mismatch after decoder restart, increment the sequence_offset correction parameter. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: flush bitstream ring buffer on decoder restartPhilipp Zabel3-0/+28
The bitstream ringbuffer might be in an underrun state after draining, or it might still contain unread data if the previous decoder stop command was flagged as immediate. Flush the bitstream ring buffer during V4L2_DEC_CMD_START to get into a well defined state. Also fill the bitstream with buffers that have been queued during draining, to resume decoding immediately. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: do not enforce 512-byte initial bitstream payload on CODA960Philipp Zabel1-1/+3
On CODA960, sequence initialization can succeed if less than 512 bytes are ready in the bitstream ring buffer. On other variants, warn about too small payload in start_streaming. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: pad first buffer with repeated MPEG headers to fix sequence initPhilipp Zabel4-3/+139
If the first buffer contains only headers, the sequence initialization command fails. On CodaHx4 the buffer must be padded to at least 512 bytes, on CODA960 it seems to be enough to just repeat the sequence and extension headers (MPEG-2) or the VOS and VO headers (MPEG-4) once for for sequence initialization to succeed without further bitstream data. On CodaHx4 the headers can be repeated multiple times until the 512 byte mark is reached. A similar issue was solved for h.264 by padding with a filler NAL in commit 0eef89403ece ("[media] coda: pad first h.264 buffer to 512 bytes"). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: make coda_bitstream_queue more versatilePhilipp Zabel1-14/+9
Pass vaddr and size to coda_bitstream_queue instead of a struct vb2_v4l2_buffer to make it reusable for queueing data that is not exactly a whole v4l2 buffer into the bitstream ringbuffer. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: integrate internal frame metadata into a structurePhilipp Zabel2-34/+40
Combine the separate auxiliary buffer, buffer meta, frame type, and decode error arrays into an array of struct coda_internal_frame. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: implement decoder source change eventPhilipp Zabel1-0/+20
The stateful decoder API requires decoders to signal detection of stream dimensions via the V4L2_EVENT_SOURCE_CHANGE event. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: add sequence initialization workPhilipp Zabel3-0/+51
Add a sequence initialization work item to be run when OUTPUT buffers are queued in the initialization state. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: split decoder sequence initialization out of start decodingPhilipp Zabel1-4/+26
The sequence initialization already has to happen during the initialization phase, after headers have been queued on the OUTPUT queue. This means that sequence initialization has to be queued as a work item from QBUF on the OUTPUT queue. The internal framebuffer setup should be done later during VIDIOC_REQBUFS() on the CAPTURE queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: fix V4L2_DEC_CMD_STOP when all buffers are already consumedMarco Felsch1-0/+6
When the DEC_CMD_STOP command is issued after the context has already consumed all the queued buffers, we need to make sure to wake the destination queue with last_buffer_dequeued set, to allow userspace to make progress in its EOS handling. As there might still be picture run workers pending at that point, we need to synchronize with them, so the sequence number comparison reads stable values. reword commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: add coda_wake_up_capture_queuePhilipp Zabel1-7/+13
Combine setting the last_buffer_dequeued flag on the capture video queue and waking up its done workqueue into a helper function. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: fix last buffer handling in V4L2_ENC_CMD_STOPMarco Felsch1-0/+2
coda_encoder_cmd() is racy, as the last scheduled picture run worker can still be in-flight while the ENC_CMD_STOP command is issued. Depending on the exact timing the sequence numbers might already be changed, but the last buffer might not have been put on the destination queue yet. In this case the current implementation would prematurely wake the destination queue with last_buffer_dequeued=true, causing userspace to call streamoff before the last buffer is handled. Close this race window by synchronizing with the pic_run_worker before doing the sequence check. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> [l.stach@pengutronix.de: switch to flush_work, reword commit message] Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: fix mpeg2 sequence number handlingPhilipp Zabel1-1/+4
Sequence number handling assumed that the BIT processor frame number starts counting at 1, but this is not true for the MPEG-2 decoder, which starts at 0. Fix the sequence counter offset detection to handle this. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: use mem2mem try_en/decoder_cmd helpersPhilipp Zabel1-17/+2
Use mem2mem try_en/decoder_cmd helpers to ensure consistent behaviour with other video codec drivers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: coda: implement CMD_START to restart decodingMichael Tretter1-4/+17
The CMD_START shall be used to start the processing after a drain that was initiated with CMD_STOP. Up until now, a drain on coda could only be finished with a STREAMOFF-STREAMON, which resulted in a reset of the device. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: coda: Use devm_platform_ioremap_resource()Fabio Estevam1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-12media: drivers: media: coda: fix warning same module namesAnders Roxell1-2/+2
When building with CONFIG_VIDEO_CODA and CONFIG_CODA_FS enabled as loadable modules, we see the following warning: fs/coda/coda.ko drivers/media/platform/coda/coda.ko Rework so media/platform/coda is named coda-vpu. Leaving CODA_FS as is since that's a well known module. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11Merge tag 'v5.2-rc4' into media/masterMauro Carvalho Chehab9-53/+9
There are some conflicts due to SPDX changes. We also have more patches being merged via media tree touching them. So, let's merge back from upstream and address those. Linux 5.2-rc4 * tag 'v5.2-rc4': (767 commits) Linux 5.2-rc4 MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ... Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-9/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner7-35/+7
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29media: coda: use v4l2_m2m_buf_copy_metadataPhilipp Zabel1-6/+1
Use v4l2_m2m2_buf_copy_metadata to let BIT encoder contexts copy buffer field, timestamp, timestamp flags, and optionally timecode. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-29media: coda: add lockdep assertsPhilipp Zabel1-0/+6
coda_command_sync, coda_hw_reset, and __coda_start_decoding all expect to be called under the coda_mutex device lock. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-29media: coda: add decoder MPEG-2 profile and level controlsPhilipp Zabel4-1/+76
The MPEG-2 decoder firmware reports profile and level indication that can be used to set V4L2 MPEG-2 profile and level controls Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-29media: coda: add decoder MPEG-4 profile and level controlsPhilipp Zabel4-1/+78
The MPEG-4 decoder firmware reports profile and level indication values that can be used to update V4L2 MPEG-4 profile and level controls. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28media: coda: Clear the interrupt reasonEzequiel Garcia1-0/+1
This commit clears the interrupt reason (INT_REASON) register on the interrupt handler. Without this clearing, the CODA hardware has been observed to get completely stalled on CODA980 variants, requiring a pretty deep hardware reset. The datasheet specifies that the INT_REASON register is set by the CODA hardware, and should be cleared by the host. While the CODA versions that are currently supported by this driver don't seem to need this change, it's a really small change, so it seems a wise thing to do to avoid hitting some rare race-condition in the hardware. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28media: coda: Replace the threaded interrupt with a hard interruptEzequiel Garcia1-2/+2
The current interrupt handler is doing very little, and not doing any non-atomic operations. Pretty much all it does is accessing a couple registers, taking a couple spinlocks and then signalling a completion. There is no reason this should be a threaded interrupt handler, so move the handler to regular hard interrupt context. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28media: coda: Remove unbalanced and unneeded mutex unlockEzequiel Garcia1-1/+0
The mutex unlock in the threaded interrupt handler is not paired with any mutex lock. Remove it. This bug has been here for a really long time, so it applies to any stable repo. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28media: coda: Print a nicer device registered messageEzequiel Garcia1-4/+9
This is just a cosmetic change to print a more descriptive message, to distinguish decoder from encoder: So, instead of printing coda 2040000.vpu: codec registered as /dev/video[4-5] With this change, the driver now prints coda 2040000.vpu: encoder registered as /dev/video4 coda 2040000.vpu: decoder registered as /dev/video5 Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28media: coda/venus/s5p_mfc: fix control typoHans Verkuil2-3/+3
These two slice modes used by the V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE control had a silly typo: V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES SICE should be SLICE. Rename these enum values, keeping the old ones (under #ifndef __KERNEL__) for backwards compatibility reasons. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28Merge tag 'v5.2-rc2' into patchworkMauro Carvalho Chehab1-0/+2
Merge back from upstream into media tree, as there are some patches merged upstream that has pontential of causing conflicts (one actually rised a conflict already). Linux 5.2-rc2 * tag 'v5.2-rc2': (377 commits) Linux 5.2-rc2 random: fix soft lockup when trying to read from an uninitialized blocking pool tracing: Silence GCC 9 array bounds warning ext4: fix dcache lookup of !casefolded directories locking/lock_events: Use this_cpu_add() when necessary KVM: x86: fix return value for reserved EFER tools/kvm_stat: fix fields filter for child events KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard kvm: selftests: aarch64: compile with warnings on kvm: selftests: aarch64: fix default vm mode kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION KVM: x86/pmu: do not mask the value that is written to fixed PMUs KVM: x86/pmu: mask the result of rdpmc according to the width of the counters x86/kvm/pmu: Set AMD's virt PMU version to 1 KVM: x86: do not spam dmesg with VMCS/VMCB dumps kvm: Check irqchip mode before assign irqfd kvm: svm/avic: fix off-by-one in checking host APIC ID KVM: selftests: do not blindly clobber registers in guest asm KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c ...
2019-05-23media: coda: remove -I$(src) header search pathMasahiro Yamada3-4/+3
Remove the header search path to the current directory. The compiler will search headers in the current directory by using #include "..." instead of #include <...> Also, change TRACE_INCLUDE_PATH to point to the location of trace.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: update profile and level controls after sequence initializationPhilipp Zabel4-28/+54
The header report return value from decoder sequence initialization is available on CodaHx4 and CODA7541 already. Use the profile and level identification values reported by the firmware to update codec specific profile and level controls after sequence initialization has succeeded. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: add menu strings to s_ctrl debug outputPhilipp Zabel1-2/+7
When a menu control is updated via s_ctrl, print the corresponding menu entry string in addition to the numerical value it is set to. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: demote s_ctrl debug messages to level 2Philipp Zabel1-1/+1
Otherwise the default initialization would always swamp the debug log. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: improve decoder job finished debug messagePhilipp Zabel1-5/+29
Print a single line containing the following information: - which frame was decoded, including its type, - if no frame was decoded, the reason (code) why - which decoded frame was returned, copied out by either rotator or VODA, - if no frame was returned, the reason (code) why, and - the output queue sequence number, which is only useful in case each queued coded buffer corresponds to exactly one frame. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: add coda_frame_type_char helperPhilipp Zabel1-4/+9
Add a function to translate from V4L2 buffer flags to 'I'/'P'/'B' characters for debug output. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: move job ready message to coda_debug level 2Philipp Zabel1-1/+1
Use the newly freed verbose debug level 2 for job ready debug messages. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: move register debugging to coda_debug level 3Philipp Zabel1-2/+2
This allows to use coda_debug level 2 for verbose but not quite as verbose debug logging. Register access level logging is of limited use anyway, as this includes busy polling of status bits. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08media: coda: fix unset field and fail on invalid field in buf_preparePhilipp Zabel1-0/+10
v4l2-compliance likes to queue a buffer with field set to V4L2_FIELD_ANY and expects it to be returned corrected to a valid field. Follow vicodec in handling this in the buf_prepare callback. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: coda: throw error on create_bufs with too small sizePhilipp Zabel1-0/+3
If VIDIOC_CREATE_BUFS is called with a sizeimage smaller than the queue sizeimage, fail with -EINVAL instead of correcting the size and continuing without error. This is required by v4l2-compliance. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-18 07:57:23 +0000