summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/soc_camera/mt9m111.c
AgeCommit message (Collapse)AuthorFilesLines
2016-09-09[media] media: mt9m111: move mt9m111 out of soc_cameraRobert Jarzmik1-1036/+0
As the mt9m111 is now working as a standalone v4l2 subdevice sensor, move it out of soc_camera directory and sever its dependency on soc_camera. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09[media] media: mt9m111: use only the SRGB colorspaceRobert Jarzmik1-4/+4
mt9m111 being a camera sensor, its colorspace should always be SRGB, for both RGB based formats or YCbCr based ones. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09[media] media: mt9m111: make a standalone v4l2 subdeviceRobert Jarzmik1-36/+15
Remove the soc_camera adherence. Mostly the change removes the power manipulation provided by soc_camera, and instead : - powers on the sensor when the s_power control is activated - powers on the sensor in initial probe - enables and disables the MCLK provided to it in power on/off This patch also drops support for inverters on synchronisation and clock lines. It is assumed, if any board ever needs such inverters, support for them can be added in the future Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24[media] v4l2: remove g/s_crop from video opsHans Verkuil1-27/+30
Replace all calls to g/s_crop by calls to the get/set_selection pad ops. Remove the old g/s_crop video ops since they are now no longer used. The cropcap video op is now only used to pass pixelaspect information, and is only needed if the pixelaspect is not 1:1. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2015-05-01[media] v4l2: replace try_mbus_fmt by set_fmtHans Verkuil1-18/+13
The try_mbus_fmt video op is a duplicate of the pad op. Replace all uses in sub-devices by the set_fmt() pad op. Since try_mbus_fmt and s_mbus_fmt both map to the set_fmt pad op (but with a different 'which' argument), this patch will replace both try_mbus_fmt and s_mbus_fmt by set_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01[media] v4l2: replace video op g_mbus_fmt by pad op get_fmtHans Verkuil1-3/+8
The g_mbus_fmt video op is a duplicate of the pad op. Replace all uses by the get_fmt pad op and remove the video op. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01[media] v4l2: replace enum_mbus_fmt by enum_mbus_codeHans Verkuil1-5/+10
Replace all calls to the enum_mbus_fmt video op by the pad enum_mbus_code op and remove the duplicate video op. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kamil Debski <k.debski@samsung.com> Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03[media] media: drop call to v4l2_device_unregister_subdev()Lad, Prabhakar1-1/+0
These drivers are moved to support asynchronous probing, v4l2_async_unregister_subdev() unregisters the subdev so there isn't a need to explicitly call v4l2_device_unregister_subdev(). Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] i2c: Make use of media_bus_format enumBoris BREZILLON1-35/+35
In order to have subsytem agnostic media bus format definitions we've moved media bus definitions to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Replace all references to the old definitions in i2c drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-07-30[media] media: mt9m111: add device-tree suppportRobert Jarzmik1-0/+12
Add device-tree support for mt9m111 camera sensor. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07[media] videodev2: Set vb2_rect's width and height as unsignedRicardo Ribalda1-2/+2
As discussed on the media summit 2013, there is no reason for the width and height to be signed. Therefore this patch is an attempt to convert those fields from __s32 to __u32. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> (documentation and smiapp) Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] V4L2: mt9m111: switch to asynchronous subdevice probingGuennadi Liakhovetski1-12/+26
Convert the mt9m111 driver to asynchronous subdevice probing. Synchronous probing is also still possible. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-06-21[media] soc-camera: switch I2C subdevice drivers to use v4l2-clkGuennadi Liakhovetski1-4/+16
Instead of centrally enabling and disabling subdevice master clocks in soc-camera core, let subdevice drivers do that themselves, using the V4L2 clock API and soc-camera convenience wrappers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] soc_camera sensors: remove g_chip_ident opHans Verkuil1-31/+2
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_register ioctlHans Verkuil1-1/+1
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] mt9m111: fix Oops - initialise context before dereferencingGuennadi Liakhovetski1-2/+3
A recent commit "[media] soc-camera: Push probe-time power management to drivers" causes an Oops during mt9m111 driver probing because its .ctx private data field is now dereferenced before it is initialised. Fix this by initialising the field earlier. Reported-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] soc-camera: mt9m111: Fix auto-exposure controlBenoît Thébaudeau1-2/+2
Commit f9bd5843658e18a7097fc7258c60fb840109eaa8 changed V4L2_CID_EXPOSURE_AUTO from boolean to enum, and commit af8425c54beb3c32cbb503a379132b3975535289 changed the creation of this control into a menu for the mt9m111. However, mt9m111_set_autoexposure() is still interpreting the value set for this control as a boolean, which also conflicts with the default value of this control set to V4L2_EXPOSURE_AUTO (0). This patch makes mt9m111_set_autoexposure() interpret the value set for V4L2_CID_EXPOSURE_AUTO as defined by enum v4l2_exposure_auto_type. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] soc-camera: use devm_kzalloc in subdevice driversGuennadi Liakhovetski1-11/+4
I2C drivers can use devm_kzalloc() too in their .probe() methods. Doing so simplifies their clean up paths. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] soc-camera: split struct soc_camera_link into host and subdevice partsGuennadi Liakhovetski1-10/+11
struct soc_camera_link currently contains fields, used both by sensor and bridge drivers. To make subdevice driver re-use simpler, split it into a host and a subdevice parts. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_crop constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_crop. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] soc-camera: Push probe-time power management to driversLaurent Pinchart1-35/+45
Several client drivers access the hardware at probe time, for instance to read the probe chip ID. Such chips need to be powered up when being probed. soc-camera handles this by powering chips up in the soc-camera probe implementation. However, this will break with non soc-camera hosts that don't perform the same operations. Fix the problem by pushing the power up/down from the soc-camera core down to individual drivers on a needs basis. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] soc-camera: Add and use soc_camera_power_[on|off]() helper functionsLaurent Pinchart1-15/+37
Instead of forcing all soc-camera drivers to go through the mid-layer to handle power management, create soc_camera_power_[on|off]() functions that can be called from the subdev .s_power() operation to manage regulators and platform-specific power handling. This allows non soc-camera hosts to use soc-camera-aware clients. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [g.liakhovetski@gmx.de: fix compile breakage] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] move soc_camera i2c drivers into its own dirMauro Carvalho Chehab1-0/+1014
Move all soc_camera i2c drivers into drivers/media/i2c/soc_camera/. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-14 05:33:17 +0000