summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/ov7740.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-13media: i2c: Convert to new i2c device probe()Kieran Bingham1-3/+2
The I2C core framework provides a simplified probe framework from commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"). These drivers do not utilise the i2c_device_id table in the probe, so we can easily convert them to utilise the simplified i2c driver registration. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: media/i2c: don't return ENOTTY if SUBDEV_API is not setHans Verkuil1-6/+2
If CONFIG_VIDEO_V4L2_SUBDEV_API is not set, then it is still possible to call set_fmt for V4L2_SUBDEV_FORMAT_TRY, the result is just not stored. So return 0 instead of -ENOTTY. Calling get_fmt with V4L2_SUBDEV_FORMAT_TRY should return -EINVAL instead of -ENOTTY, after all the get_fmt functionality is still present, just not supported for TRY. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-23media: ov7740: remove redundant V4L2_CTRL_FLAG_VOLATILE setAkinobu Mita1-2/+0
If the v4l2 controls are set up for autofoo/foo-type handling by calling v4l2_ctrl_auto_cluster() with the last set_volatile argument setting true, each non-auto control doesn't need to be flagged V4L2_CTRL_FLAG_VOLATILE. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-23media: ov7740: fix vertical flip controlAkinobu Mita1-2/+2
Setting the value of the V4L2_CID_VFLIP control is currently ignored. Because V4L2_CID_HFLIP and V4L2_CID_VFLIP are independently controlled in s_ctrl() but these controls belong to the same cluster and the first control is V4L2_CID_HFLIP. Fix it by not clustering these controls. Also correct erroneous updating register bit for vertical flip. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-23media: ov7740: avoid invalid framesize settingAkinobu Mita1-1/+5
If the requested framesize by VIDIOC_SUBDEV_S_FMT is larger than supported framesizes, it causes an out of bounds array access and the resulting framesize is unexpected. Avoid out of bounds array access and select the default framesize. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-23media: ov7740: fix unbalanced pm_runtime_get/putAkinobu Mita1-6/+6
Avoid returning without decrement the usage count in s_ctrl(). Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-29media: ov7740: enable to get exposure control in autoexposure modeAkinobu Mita1-3/+25
The exposure control is clustered with the autoexposure control and flagged as volatile, but the g_volatile_ctrl() doesn't handle V4L2_CID_EXPOSURE_AUTO. So, the value of the exposure control can't be read in autoexposure mode. This enables to get the exposure control in autoexposure mode by making ov7740_get_volatile_ctrl() deal with V4L2_CID_EXPOSURE_AUTO. This also sets the exposure control as volatile by specifying the argument to v4l2_ctrl_auto_cluster() instead of manually flagging it. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-01media: i2c: fix several typosMauro Carvalho Chehab1-1/+1
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18media: ov7740: fix runtime pm initializationAkinobu Mita1-2/+5
The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(), and this makes this device's runtime PM usage count a negative value. The ov7740_set_ctrl() tries to do something only if the device's runtime PM usage counter is nonzero. ov7740_set_ctrl() { if (!pm_runtime_get_if_in_use(&client->dev)) return 0; <do something>; pm_runtime_put(&client->dev); return ret; } However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup() while the runtime PM of this device is not yet enabled. In this case, the pm_runtime_get_if_in_use() returns -EINVAL (!= 0). Therefore we can't bail out of this function and the usage count is decreased by pm_runtime_put() without increment. This fixes this problem by enabling the runtime PM of this device before v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called when the runtime PM is enabled. Cc: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-06media: ov7740: constify structures stored in fields of v4l2_subdev_ops structureJulia Lawall1-2/+2
The fields of a v4l2_subdev_ops structure are all const, so the structures that are stored there and are not used elsewhere can be const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: i2c: Fix pm_runtime_get_if_in_use() usage in sensor driversSakari Ailus1-1/+1
pm_runtime_get_if_in_use() returns -EINVAL if runtime PM is disabled. This should not be considered an error. Generally the driver has enabled runtime PM already so getting this error due to runtime PM being disabled will not happen. Instead of checking for lesser or equal to zero, check for zero only. Address this for drivers where this pattern exists. This patch has been produced using the following command: $ git grep -l pm_runtime_get_if_in_use -- drivers/media/i2c/ | \ xargs perl -i -pe 's/(pm_runtime_get_if_in_use\(.*\)) \<\= 0/!$1/' Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-04-23media: ov7740: Set subdev HAS_EVENT flagSakari Ailus1-1/+1
The driver has event support implemented but fails to set the flag enabling event support. Set the flag to enable control events. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-23media: ov7740: Fix control handler error at the end of control initSakari Ailus1-0/+7
Check that no error happened during adding controls to the driver's control handler. Print an error message and bail out if there was one. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-23media: ov7740: Check for possible NULL return value in control creationSakari Ailus1-3/+8
Check that creating the control actually succeeded before accessing it. A failure would lead to NULL pointer reference. Fix this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-23media: ov7740: Fix number of controls hintSakari Ailus1-1/+1
The driver has 12 controls, not 2. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: ov7740: remove an unused varMauro Carvalho Chehab1-1/+1
Fix this warning regression: drivers/media/i2c/ov7740.c: warning: variable 'ret' set but not used [-Wunused-but-set-variable]: => 276:6 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22media: convert g/s_parm to g/s_frame_interval in subdevsHans Verkuil1-21/+8
Convert all g/s_parm calls to g/s_frame_interval. This allows us to remove the g/s_parm ops since those are a duplicate of g/s_frame_interval. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23media: i2c: ov7740: use gpio/consumer.h instead of gpio.hArnd Bergmann1-1/+1
When built on a platform without gpiolib support, we run into a couple of compile errors in ov7740, including: drivers/media/i2c/ov7740.c: In function 'ov7740_set_power': drivers/media/i2c/ov7740.c:307:4: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration] gpiod_direction_output(ov7740->pwdn_gpio, 0); drivers/media/i2c/ov7740.c:914:4: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'? Changing it to use the correct header file solves the problem. Fixes: 39c5c4471b8d ("media: i2c: Add the ov7740 image sensor driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23media: entity: Add a nop variant of media_entity_cleanupSakari Ailus1-2/+0
Add nop variant of media_entity_cleanup. This allows calling media_entity_cleanup whether or not Media controller is enabled, simplifying driver code. Also drop #ifdefs on a few drivers around media_entity_cleanup(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05media: i2c: Add the ov7740 image sensor driverWenyou Yang1-0/+1216
The ov7740 (color) image sensor is a high performance VGA CMOS image snesor, which supports for output formats: RAW RGB and YUV and image sizes: VGA, and QVGA, CIF and any size smaller. Signed-off-by: Songjun Wu <songjun.wu@microchip.com> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 04:03:05 +0000