summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/ov6650.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen1-14/+14
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: ov6650: Use the generic clock frameworkEzequiel Garcia1-17/+11
Commit ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies") removed the last in-tree user of this sensor. New users will be required to use the generic clock framework, so it's possible to convert the driver to use it. Convert the driver to use the CCF, and drop the legacy v4l2-clk API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-29media: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-18media: i2c: ov6650: Use new [get|set]_mbus_config opsJacopo Mondi1-16/+37
Use the new get_mbus_config and set_mbus_config pad operations in place of the video operations currently in use. Compared to other drivers where the same conversion has been performed, ov6650 proved to be a bit more tricky, as the existing g_mbus_config implementation did not report the currently applied configuration but the set of all possible configuration options. Adapt the driver to support the semantic of the two newly introduced operations: - get_mbus_config reports the current media bus configuration - set_mbus_config applies only changes explicitly requested and updates the provided cfg parameter to report what has actually been applied to the hardware. Compile-tested only. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-11-08media: ov6650: fix smatch warningHans Verkuil1-1/+1
Initialize ret to 0 to fix this smatch error: drivers/media/i2c/ov6650.c:853 ov6650_video_probe() error: uninitialized symbol 'ret'. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-10-24media: ov6650: Fix arbitrary selection of master clock rateJanusz Krzysztofik1-6/+58
A hardcoded 12 MHz master clock frequency has been assumed since conversion of the driver from soc_camera sensor to a standalone V4L2 subdevice by commit 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice"). Fix it. Define a static table of supported master clock rates (fix misnamed symbol while being at it), then use v4l2_clk_get/set_rate() to obtain a clock rate matching one of those supported. On success, apply respective master clock hardware divisor provided by the matching element of the table. [Sakari Ailus: Initialize xclk to NULL.] Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Drop unused .pclk_max fieldJanusz Krzysztofik1-4/+0
This field of the driver private structure is no longer used, drop it. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Don't reapply pixel clock divisor on format changeJanusz Krzysztofik1-14/+3
As calculation of pixel clock hardware divisor no longer depends on mbus format specific maximum pixel clock, there is no need to reapply the divisor on format change. Drop related code from ov6650_s_fmt() helper. Since a master clock hardware divisor, so far applied only together with the pixel clock divisor in a single operation, will no longer be applied from ov6650_s_fmt(), apply it, still using a hardcoded value for now, from ov6650_prog_dflt() helper so hardware is still initialised correctly on device probe. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Simplify clock divisor calculationJanusz Krzysztofik1-24/+5
As appears from an analysis of to_clkrc() helper code after its pclk_limit argument has been dropped, its result no longer depends on another argument - pclk_max. Moreover, assuming that a constant value of FRAME_RATE_MAX is always used as a denominator of the only significant argument left - a struct v4l2_fract, the result in fact depends only on the numerator value of that argument. As a further consequence, it no longer makes sense to recalculate frame intervals by converting them forth and back with a GET_CLKRC_DIV(to_clkrc(tpf)) construct. Drop use of GET_CLKRC_DIV() on results of to_clkrc() where possible - use the frame interval value directly. Furthermore, replace the to_clkrc() helper function with a simple macro and update its users to always use FRAME_RATE_MAX as frame interval denominator and pass only its numerator as an argument. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Drop obsolete .pclk_limit attributeJanusz Krzysztofik1-10/+4
That attribute used to be obtained from platform data by a soc_camera host interface and passed to the sensor driver for .s_mbus_fmt() video operation callback, later reused as .set_fmt() pad operation callback, to be able to limit frame rate. The driver stored that value in its private structure for further use from .g/s_parm(), later converted to g/s_frame_interval(). On conversion of the driver from soc_camera sensor to a standalone V4L2 subdevice by commit 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice"), that attribute had been replaced by a constant and hardcoded to an arbitrarily chosen pixel clock limit. Drop it. Host interfaces can limit frame rate if needed by calling .s_frame_interval(). Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: ov6650: Fix stored frame interval not in sync with hardwareJanusz Krzysztofik1-9/+12
The driver stores a frame interval value supposed to be in line with hardware state in a device private structure. Since the driver initial submission, the respective field of the structure has never been initialised on device probe. Moreover, if updated from .s_frame_interval(), a new value is stored before it is applied on hardware. If an error occurs during device update, the stored value may no longer reflect hardware state and consecutive calls to .g_frame_interval() may return incorrect information. Assuming a failed update of the device means its actual state hasn't changed, update the frame interval field of the device private structure with a new value only after it is successfully applied on hardware so it always reflects actual hardware state to the extent possible. Also, initialise the field with hardware default frame interval on device probe. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix stored crop rectangle not in sync with hardwareJanusz Krzysztofik1-0/+2
The driver stores crop rectangle settings supposed to be in line with hardware state in a device private structure. Since the driver initial submission, crop rectangle width and height settings are not updated correctly when rectangle offset settings are applied on hardware. If an error occurs while the device is updated, the stored settings my no longer reflect hardware state and consecutive calls to .get_selection() as well as .get/set_fmt() may return incorrect information. That in turn may affect ability of a bridge device to use correct DMA transfer settings if such incorrect informamtion on active frame format returned by .get/set_fmt() is used. Assuming a failed update of the device means its actual settings haven't changed, update crop rectangle width and height settings stored in the device private structure correctly while the rectangle offset is successfully applied on hardware so the stored values always reflect actual hardware state to the extent possible. Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix stored frame format not in sync with hardwareJanusz Krzysztofik1-3/+6
The driver stores frame format settings supposed to be in line with hardware state in a device private structure. Since the driver initial submission, those settings are updated before they are actually applied on hardware. If an error occurs on device update, the stored settings my not reflect hardware state anymore and consecutive calls to .get_fmt() may return incorrect information. That in turn may affect ability of a bridge device to use correct DMA transfer settings if such incorrect informmation on active frame format returned by .get_fmt() is used. Assuming a failed device update means its state hasn't changed, update frame format related settings stored in the device private structure only after they are successfully applied so the stored values always reflect hardware state as closely as possible. Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix default format not applied on device probeJanusz Krzysztofik1-2/+5
It is not clear what pixel format is actually configured in hardware on reset. MEDIA_BUS_FMT_YUYV8_2X8, assumed on device probe since the driver was intiially submitted, is for sure not the one. Fix it by explicitly applying a known, driver default frame format just after initial device reset. Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY supportJanusz Krzysztofik1-3/+9
Commit da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") converted a former ov6650_g_fmt() video operation callback to an ov6650_get_fmt() pad operation callback. However, the converted function disregards a format->which flag that pad operations should obey and always returns active frame format settings. That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with -EINVAL, or providing the response from a pad config argument, likely updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt(). Since implementation of the latter is trivial, go for it. Fixes: da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix some format attributes not under controlJanusz Krzysztofik1-12/+39
User arguments passed to .get/set_fmt() pad operation callbacks may contain unsupported values. The driver takes control over frame size and pixel code as well as colorspace and field attributes but has never cared for remainig format attributes, i.e., ycbcr_enc, quantization and xfer_func, introduced by commit 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support"). Fix it. Set up a static v4l2_mbus_framefmt structure with attributes initialized to reasonable defaults and use it for updating content of user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE, postpone frame size update, now performed from inside ov6650_s_fmt() helper, util the user argument is first updated in ov6650_set_fmt() with default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy all attributes to pad config, only those handled by the driver, then fill the response with the default frame format updated with resulting pad config format code and frame size. Fixes: 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix incorrect use of JPEG colorspaceJanusz Krzysztofik1-11/+2
Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8. According to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies exclusively to V4L2_PIX_FMT_JPEG. Since the sensor does not support JPEG format, fix it to always select V4L2_COLORSPACE_SRGB. Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix crop rectangle alignment not passed backJanusz Krzysztofik1-16/+15
Commit 4f996594ceaf ("[media] v4l2: make vidioc_s_crop const") introduced a writable copy of constified user requested crop rectangle in order to be able to perform hardware alignments on it. Later on, commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") replaced s_crop() video operation using that const argument with set_selection() pad operation which had a corresponding argument not constified, however the original behavior of the driver was not restored. Since that time, any hardware alignment applied on a user requested crop rectangle is not passed back to the user calling .set_selection() as it should be. Fix the issue by dropping the copy and replacing all references to it with references to the crop rectangle embedded in the user argument. Fixes: 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix control handler not freed on init errorJanusz Krzysztofik1-4/+8
Since commit afd9690c72c3 ("[media] ov6650: convert to the control framework"), if an error occurs during initialization of a control handler, resources possibly allocated to the handler are not freed before device initialiaton is aborted. Fix it. Fixes: afd9690c72c3 ("[media] ov6650: convert to the control framework") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix MODULE_DESCRIPTIONJanusz Krzysztofik1-2/+2
Commit 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice") converted the driver from a soc_camera sensor to a standalone V4L subdevice driver. Unfortunately, module description was not updated to reflect the change. Fix it. While being at it, update email address of the module author. Fixes: 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-09Merge tag 'media/v5.3-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Atmel microship ISC driver - coda has gained support for mpeg2 and mpeg4 - cxusb gained support for analog TV - rockchip staging driver was split into two separate staging drivers - added a new staging driver for Allegro DVT video IP core - added a new staging driver for Amlogic Meson video decoder - lots of improvements and cleanups * tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits) media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs media: doc-rst: Fix typos media: radio-raremono: change devm_k*alloc to k*alloc media: stv0297: fix frequency range limit media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes media: dvb_frontend: split dvb_frontend_handle_ioctl function media: mceusb: disable "nonsensical irdata" messages media: rc: remove redundant dev_err message media: cec-notifier: add new notifier functions media: cec: add struct cec_connector_info support media: cec-notifier: rename variables, check kstrdup and n->conn_name media: MAINTAINERS: Add maintainers for Media Controller media: staging: media: tegra-vde: Defer dmabuf's unmapping media: staging: media: tegra-vde: Add IOMMU support media: hdpvr: fix locking and a missing msleep media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom() media: atmel: atmel-isc: fix i386 build error media: v4l2-ctrl: Move compound control initialization media: hantro: Use vb2_get_buffer media: pci: cx88: Change the type of 'missed' to u64 ...
2019-06-21media: ov6650: Fix device node exposed without proper lockingJanusz Krzysztofik1-1/+0
Commit c62b96050bee ("media: ov6650: Register with asynchronous subdevice framework") carelessly requested creation of a video device node by setting a V4L2_SUBDEV_FL_HAS_DEVNODE flag. The driver is not ready for that as it doesn't implement proper locking required for serialization of IOCTLs. Fix it by dropping the flag assignment. Fixes: c62b96050bee ("media: ov6650: Register with asynchronous subdevice framework") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-22media: ov6650: Register with asynchronous subdevice frameworkJanusz Krzysztofik1-5/+13
Register V4L2 subdevice implemented by the driver to the V4L2 asynchronous subdevice framework. [Sakari Ailus: Remove extra call to v4l2_i2c_subdev_set_name] Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: ov6650: Move v4l2_clk_get() to ov6650_video_probe() helperJanusz Krzysztofik1-11/+14
In preparation for adding asynchronous subdevice support to the driver, don't acquire v4l2_clk from the driver .probe() callback as that may fail if the clock is provided by a bridge driver which may be not yet initialized. Move the v4l2_clk_get() to ov6650_video_probe() helper which is going to be converted to v4l2_subdev_internal_ops.registered() callback, executed only when the bridge driver is ready. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: ov6650: Fix sensor possibly not detected on probeJanusz Krzysztofik1-0/+2
After removal of clock_start() from before soc_camera_init_i2c() in soc_camera_probe() by commit 9aea470b399d ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650 driver could no longer probe the sensor successfully because its clock was no longer turned on in advance. The issue was initially worked around by adding that missing clock_start() equivalent to OMAP1 camera interface driver - the only user of this sensor - but a propoer fix should be rather implemented in the sensor driver code itself. Fix the issue by inserting a delay between the clock is turned on and the sensor I2C registers are read for the first time. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Fixes: 9aea470b399d ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-01media: i2c: fix several typosMauro Carvalho Chehab1-2/+2
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-03media: v4l: Remove support for crop default target in subdev driversSakari Ailus1-1/+0
The V4L2 sub-device API does not support the crop default target. A number of drivers apparently still did support this, likely as it was needed by the SoC camera framework. Drop support for the default crop rectaingle in sub-device drivers, and use the bounds rectangle in SoC camera instead. Reported-by: Helmut Grohne <h.grohne@intenta.de> Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-02-22media: convert g/s_parm to g/s_frame_interval in subdevsHans Verkuil1-22/+11
Convert all g/s_parm calls to g/s_frame_interval. This allows us to remove the g/s_parm ops since those are a duplicate of g/s_frame_interval. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-04[media] i2c: Delete an error messages for failed memory allocationMarkus Elfring1-4/+1
Omit extra messages for memory allocation failures. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: merged similar patches] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-07-18media: ov6650: convert to standalone v4l2 subdeviceJanusz Krzysztofik1-0/+1052
Remove the soc_camera dependencies and move the diver to i2c Lost features, fortunately not used or not critical on test platform: - soc_camera power on/off callback - replaced with clock enable/disable only, no support for platform provided regulators nor power callback, - soc_camera sense request - replaced with arbitrarily selected default master clock rate and pixel clock limit, no support for platform requested values, - soc_camera board flags - no support for platform requested mbus config tweaks. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-13 01:48:17 +0000