summaryrefslogtreecommitdiffstats
path: root/drivers/md
AgeCommit message (Collapse)AuthorFilesLines
2008-04-30md: support blocking writes to an array on device failureDan Williams4-7/+115
Allows a userspace metadata handler to take action upon detecting a device failure. Based on an original patch by Neil Brown. Changes: -added blocked_wait waitqueue to rdev -don't qualify Blocked with Faulty always let userspace block writes -added md_wait_for_blocked_rdev to wait for the block device to be clear, if userspace misses the notification another one is sent every 5 seconds -set MD_RECOVERY_NEEDED after clearing "blocked" -kill DoBlock flag, just test mddev->external Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30md: prevent duplicates in bind_rdev_to_arrayDan Williams1-0/+5
Found when trying to reassemble an active externally managed array. Without this check we hit the more noisy "sysfs duplicate" warning in the later call to kobject_add. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30md: remove a stray command from a copy and paste error in resync_start_storeDan Williams1-1/+0
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30md: fix up switching md arrays between read-only and read-writeNeilBrown1-4/+10
When setting an array to 'readonly' or to 'active' via sysfs, we must make the appropriate set_disk_ro call too. Also when switching to "read_auto" (which is like readonly, but blocks on the first write so that metadata can be marked 'dirty') we need to be more careful about what state we are changing from. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30md: fix 'safemode' handling for external metadata.NeilBrown1-11/+19
'safemode' relates to marking an array as 'clean' if there has been no write traffic for a while (a couple of seconds), to reduce the chance of the array being found dirty on reboot. ->safemode is set to '1' when there have been no write for a while, and it gets set to '0' when the superblock is updates with the 'clean' flag set. This requires a few fixes for 'external' metadata: - When an array is set to 'clean' via sysfs, 'safemode' must be cleared. - when we write to an array that has 'safemode' set (there must have been some delay in updating the metadata), we need to clear safemode. - Don't try to update external metadata in md_check_recovery for safemode transitions - it won't work. Also, don't try to support "immediate safe mode" (safemode==2) for external metadata, it cannot really work (the safemode timeout can be set very low if this is really needed). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30md: reinitialise more mddev fields in do_md_stop.NeilBrown1-0/+25
I keep finding problems where an mddev gets reused and some fields has a value from a previous usage that confuses the new usage. So clear all fields that could possible need clearing when calling do_md_stop. Also initialise the 'level' of a new array to LEVEL_NONE (which isn't 0). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30md: skip all metadata update processing when using external metadata.NeilBrown1-0/+2
All the metadata update processing for external metadata is on in user-space or through the sysfs interfaces, so make "md_update_sb" a no-op in that case. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30md: fix use after free when removing rdev via sysfsDan Williams1-1/+1
rdev->mddev is no longer valid upon return from entry->store() when the 'remove' command is given. Cc: <stable@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29dm: use unlocked variants of queue flag check/setJens Axboe1-5/+3
dm.c already provides mutual exclusion through ->map_lock. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds5-7/+7
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: Skip I/O merges when disabled block: add large command support block: replace sizeof(rq->cmd) with BLK_MAX_CDB ide: use blk_rq_init() to initialize the request block: use blk_rq_init() to initialize the request block: rename and export rq_init() block: no need to initialize rq->cmd with blk_get_request block: no need to initialize rq->cmd in prepare_flush_fn hook block/blk-barrier.c:blk_ordered_cur_seq() mustn't be inline block/elevator.c:elv_rq_merge_ok() mustn't be inline block: make queue flags non-atomic block: add dma alignment and padding support to blk_rq_map_kern unexport blk_max_pfn ps3disk: Remove superfluous cast block: make rq_init() do a full memset() relay: fix splice problem
2008-04-29drivers: use non-racy method for proc entries creation (2)Denis V. Lunev1-5/+1
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Neil Brown <neilb@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29block: no need to initialize rq->cmd with blk_get_requestFUJITA Tomonori3-4/+0
blk_get_request initializes rq->cmd (rq_init does) so the users don't need to do that. The purpose of this patch is to remove sizeof(rq->cmd) and &rq->cmd, as a preparation for large command support, which changes rq->cmd from the static array to a pointer. sizeof(rq->cmd) will not make sense and &rq->cmd won't work. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29block: make queue flags non-atomicNick Piggin2-3/+7
We can save some atomic ops in the IO path, if we clearly define the rules of how to modify the queue flags. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-28drivers/md: use time_before, time_before_eq, etcJulia Lawall1-1/+2
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ #include <linux/jiffies.h> @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28raid: remove leading TAB on printk messagesNick Andrew4-7/+8
MD drivers use one printk() call to print 2 log messages and the second line may be prefixed by a TAB character. It may also output a trailing space before newline. klogd (I think) turns the TAB character into the 2 characters '^I' when logging to a file. This looks ugly. Instead of a leading TAB to indicate continuation, prefix both output lines with 'raid:' or similar. Also remove any trailing space in the vicinity of the affected code and consistently end the sentences with a period. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28md: raid5.c convert simple_strtoul to strict_strtoulDan Williams1-9/+5
strict_strtoul handles the open-coded sanity checks in raid5_store_stripe_cache_size and raid5_store_preread_threshold Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28md: introduce get_priority_stripe() to improve raid456 write performanceDan Williams1-10/+112
Improve write performance by preventing the delayed_list from dumping all its stripes onto the handle_list in one shot. Delayed stripes are now further delayed by being held on the 'hold_list'. The 'hold_list' is bypassed when: * a STRIPE_IO_STARTED stripe is found at the head of 'handle_list' * 'handle_list' is empty and i/o is being done to satisfy full stripe-width write requests * 'bypass_count' is less than 'bypass_threshold'. By default the threshold is 1, i.e. every other stripe handled is a preread stripe provided the top two conditions are false. Benchmark data: System: 2x Xeon 5150, 4x SATA, mem=1GB Baseline: 2.6.24-rc7 Configuration: mdadm --create /dev/md0 /dev/sd[b-e] -n 4 -l 5 --assume-clean Test1: dd if=/dev/zero of=/dev/md0 bs=1024k count=2048 * patched: +33% (stripe_cache_size = 256), +25% (stripe_cache_size = 512) Test2: tiobench --size 2048 --numruns 5 --block 4096 --block 131072 (XFS) * patched: +13% * patched + preread_bypass_threshold = 0: +37% Changes since v1: * reduce bypass_threshold from (chunk_size / sectors_per_chunk) to (1) and make it configurable. This defaults to fairness and modest performance gains out of the box. Changes since v2: * [neilb@suse.de]: kill STRIPE_PRIO_HI and preread_needed as they are not necessary, the important change was clearing STRIPE_DELAYED in add_stripe_bio and this has been moved out to make_request for the hang fix. * [neilb@suse.de]: simplify get_priority_stripe * [dan.j.williams@intel.com]: reset the bypass_count when ->hold_list is sampled empty (+11%) * [dan.j.williams@intel.com]: decrement the bypass_count at the detection of stripes being naturally promoted off of hold_list +2%. Note, resetting bypass_count instead of decrementing on these events yields +4% but that is probably too aggressive. Changes since v3: * cosmetic fixups Tested-by: James W. Laferriere <babydr@baby-dragons.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28md: replace remaining __FUNCTION__ occurrencesHarvey Harrison2-25/+25
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28md: fix integer as NULL pointer warnings in md.cHarvey Harrison1-4/+4
drivers/md/md.c:734:16: warning: Using plain integer as NULL pointer drivers/md/md.c:1115:16: warning: Using plain integer as NULL pointer Add some braces to match the else-block as well. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25dm: remove md argument from specific_minorFrederik Deweerdt1-8/+6
The small patch below: - Removes the unused md argument from both specific_minor() and next_free_minor() - Folds kmalloc + memset(0) into a single kzalloc call in alloc_dev() This has been compile tested on x86. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm table: remove unused dm_create_error_tableAdrian Bunk1-38/+0
dm_create_error_table() was added in kernel 2.6.18 and never used... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm table: drop void suspend_targets returnAdrian Bunk1-2/+2
void returning functions returned the return value of another void returning function... Spotted by sparse. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm: unplug queues in threadsMikulas Patocka3-4/+11
Remove an avoidable 3ms delay on some dm-raid1 and kcopyd I/O. It is specified that any submitted bio without BIO_RW_SYNC flag may plug the queue (i.e. block the requests from being dispatched to the physical device). The queue is unplugged when the caller calls blk_unplug() function. Usually, the sequence is that someone calls submit_bh to submit IO on a buffer. The IO plugs the queue and waits (to be possibly joined with other adjacent bios). Then, when the caller calls wait_on_buffer(), it unplugs the queue and submits the IOs to the disk. This was happenning: When doing O_SYNC writes, function fsync_buffers_list() submits a list of bios to dm_raid1, the bios are added to dm_raid1 write queue and kmirrord is woken up. fsync_buffers_list() calls wait_on_buffer(). That unplugs the queue, but there are no bios on the device queue as they are still in the dm_raid1 queue. wait_on_buffer() starts waiting until the IO is finished. kmirrord is scheduled, kmirrord takes bios and submits them to the devices. The submitted bio plugs the harddisk queue but there is no one to unplug it. (The process that called wait_on_buffer() is already sleeping.) So there is a 3ms timeout, after which the queues on the harddisks are unplugged and requests are processed. This 3ms timeout meant that in certain workloads (e.g. O_SYNC, 8kb writes), dm-raid1 is 10 times slower than md raid1. Every time we submit something asynchronously via dm_io, we must unplug the queue actually to send the request to the device. This patch adds an unplug call to kmirrord - while processing requests, it keeps the queue plugged (so that adjacent bios can be merged); when it finishes processing all the bios, it unplugs the queue to submit the bios. It also fixes kcopyd which has the same potential problem. All kcopyd requests are submitted with BIO_RW_SYNC. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Acked-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-25dm raid1: use timerMikulas Patocka1-20/+28
This patch replaces the schedule() in the main kmirrord thread with a timer. The schedule() could introduce an unwanted delay when work is ready to be processed. The code instead calls wake() when there's work to be done immediately, and delayed_wake() after a failure to give a short delay before retrying. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm: move include filesAlasdair G Kergon10-274/+11
Publish the dm-io, dm-log and dm-kcopyd headers in include/linux. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm kcopyd: renameAlasdair G Kergon2-0/+0
Rename kcopyd.[ch] to dm-kcopyd.[ch]. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm: expose macrosAlasdair G Kergon1-89/+0
Make dm.h macros and inlines available in include/linux/device-mapper.h Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm kcopyd: remove redundant client countingMikulas Patocka3-98/+29
Remove client counting code that is no longer needed. Initialization and destruction is made globally from dm_init and dm_exit and is not based on client counts. Initialization allocates only one empty slab cache, so there is no negative impact from performing the initialization always, regardless of whether some client uses kcopyd or not. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm kcopyd: private mempoolMikulas Patocka1-13/+19
Change the global mempool in kcopyd into a per-device mempool to avoid deadlock possibilities. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm kcopyd: per deviceMikulas Patocka1-59/+73
Make one kcopyd thread per device. The original shared kcopyd could deadlock. Configuration:
2008-04-25dm log: make module use tracking internalJonathan Brassow2-31/+94
Remove internal module reference fields from the interface. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm log: move register functionsAlasdair G Kergon1-26/+26
Reorder a couple of functions in the file so the next patch is readable. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm log: clean interfaceHeinz Mauelshagen4-103/+112
Clean up the dm-log interface to prepare for publishing it in include/linux. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm kcopyd: clean interfaceHeinz Mauelshagen5-58/+62
Clean up the kcopyd interface to prepare for publishing it in include/linux. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm io: clean interfaceHeinz Mauelshagen8-25/+33
Clean up the dm-io interface to prepare for publishing it in include/linux. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm io: rename error to error_bitsAlasdair G Kergon1-7/+7
Rename 'error' to 'error_bits' for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm snapshot: store pointer to target instanceMikulas Patocka2-4/+4
Save pointer to dm_target in dm_snapshot structure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm log: move dirty region log code into separate moduleHeinz Mauelshagen3-12/+11
Move the dirty region log code into a separate module so other targets can share the code. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm log: generalise name in messagesHeinz Mauelshagen1-7/+8
Change dm-log.c messages from "mirror log" to "dirty region log" as a new dm target wants to share this code. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm raid1: use list_split_initRobert P. J. Day1-6/+4
Use shorter list_splice_init() for brevity. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm snapshot: reduce default memory allocationMilan Broz1-2/+2
Limit the amount of memory allocated per snapshot on systems with a large page size. (The larger default chunk size on these systems compensates for the smaller number of pages reserved.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm snapshot: fix chunksize sector conversionMikulas Patocka1-1/+1
If a snapshot has a smaller chunksize than the page size the conversion to pages currently returns 0 instead of 1, causing: kernel BUG in mempool_resize. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2008-04-21RAID: remove trailing space from printk lineNick Andrew1-1/+1
drivers/md/*.[ch] contains only one more printk line with a trailing space. Remove it. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-11md: close a livelock window in handle_parity_checks5Dan Williams1-22/+29
If a failure is detected after a parity check operation has been initiated, but before it completes handle_parity_checks5 will never quiesce operations on the stripe. Explicitly handle this case by "canceling" the parity check, i.e. clear the STRIPE_OP_CHECK flags and queue the stripe on the handle list again to refresh any non-uptodate blocks. Kernel versions >= 2.6.23 are susceptible. Cc: <stable@kernel.org> Cc: NeilBrown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28dm io: write error bits form long not intAlasdair G Kergon5-11/+11
write_err is an unsigned long used with set_bit() so should not be passed around as unsigned int. http://bugzilla.kernel.org/show_bug.cgi?id=10271 Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28dm crypt: fix ctx pendingMilan Broz1-28/+30
Fix regression in dm-crypt introduced in commit 3a7f6c990ad04e6f576a159876c602d14d6f7fef ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19drivers/md/raid5.c: fix printk warningsAndrew Morton1-3/+3
gcc-3.4.5 on sparc64: drivers/md/raid5.c: In function `raid5_end_read_request': drivers/md/raid5.c:1147: warning: long long unsigned int format, long unsigned int arg (arg 4) drivers/md/raid5.c:1164: warning: long long unsigned int format, long unsigned int arg (arg 3) drivers/md/raid5.c:1170: warning: long long unsigned int format, long unsigned int arg (arg 3) sector_t is u64, and we don't know what type the architecture uses to implement u64 (on some it is unsigned long). Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19md: remove the 'super' sysfs attribute from devices in an 'md' arrayNeilBrown1-12/+0
Exposing the binary blob which is the md 'super-block' via sysfs doesn't really fit with the whole sysfs model, and ever since commit 8118a859dc7abd873193986c77a8d9bdb877adc8 ("sysfs: fix off-by-one error in fill_read_buffer()") it doesn't actually work at all (as the size of the blob is often one page). (akpm: as in, fs/sysfs/file.c:fill_read_buffer() goes BUG) So just remove it altogether. It isn't really useful. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10md: reduce CPU wastage on idle md array with a write-intent bitmapNeilBrown1-1/+3
Recent patch titled Reduce CPU wastage on idle md array with a write-intent bitmap. would sometimes leave the array with dirty bitmap bits that stay dirty. A subsequent write would sort things out so it isn't a big problem, but should be fixed nonetheless. We need to make sure that when the bitmap becomes not "allclean", the daemon_sleep really does get set to a sensible value. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10md: fix formatting error in /proc/mdstatNeilBrown1-1/+1
If an md array is "auto-read-only", then this appears in /proc/mdstat as /dev/md0: active(auto-read-only) whereas if it is truely readonly, it appears as /dev/md0: active (read-only) The difference being a space. One program known to parse this file expects the space and gets badly confused. It will be fixed, but it would be best if what the kernel generates is more consistent too. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 08:19:16 +0000