summaryrefslogtreecommitdiffstats
path: root/drivers/md
AgeCommit message (Collapse)AuthorFilesLines
2023-01-04block: handle bio_split_to_limits() NULL returnJens Axboe2-0/+4
This can't happen right now, but in preparation for allowing bio_split_to_limits() returning NULL if it ended the bio, check for it in all the callers. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-13Merge tag 'for-6.2/dm-changes' of ↵Linus Torvalds8-28/+146
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Fix use-after-free races due to missing resource cleanup during DM target destruction in DM targets: thin-pool, cache, integrity and clone. - Fix ABBA deadlocks in DM thin-pool and cache targets due to their use of a bufio client (that has a shrinker whose locking can cause the incorrect locking order). - Fix DM cache target to set its needs_check flag after first aborting the metadata (whereby using reset persistent-data objects to update the superblock with, otherwise the superblock update could be dropped due to aborting metadata). This was found with code-inspection when comparing with the equivalent in DM thinp code. - Fix DM thin-pool's presume to continue resuming the device even if the pool in is fail mode -- otherwise bios may never be failed up the IO stack (which will prevent resetting the thin-pool target via table reload) - Fix DM thin-pool's metadata to use proper btree root (from previous transaction) if metadata commit failed. - Add 'waitfor' module param to DM module (dm_mod) to allow dm-init to wait for the specified device before continuing with its DM target initialization. * tag 'for-6.2/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: Use last transaction's pmd->root when commit failed dm init: add dm-mod.waitfor to wait for asynchronously probed block devices dm ioctl: fix a couple ioctl codes dm ioctl: a small code cleanup in list_version_get_info dm thin: resume even if in FAIL mode dm cache: set needs_check flag after aborting metadata dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata dm integrity: Fix UAF in dm_integrity_dtr() dm cache: Fix UAF in destroy() dm clone: Fix UAF in clone_dtr() dm thin: Fix UAF in run_timer_softirq()
2022-12-13Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linuxLinus Torvalds14-276/+294
Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - Support some passthrough commands without CAP_SYS_ADMIN (Kanchan Joshi) - Refactor PCIe probing and reset (Christoph Hellwig) - Various fabrics authentication fixes and improvements (Sagi Grimberg) - Avoid fallback to sequential scan due to transient issues (Uday Shankar) - Implement support for the DEAC bit in Write Zeroes (Christoph Hellwig) - Allow overriding the IEEE OUI and firmware revision in configfs for nvmet (Aleksandr Miloserdov) - Force reconnect when number of queue changes in nvmet (Daniel Wagner) - Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi Grimberg, Christoph Hellwig, Christophe JAILLET) - Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni) - Use the common tagset helpers in nvme-pci driver (Christoph Hellwig) - Cleanup the nvme-pci removal path (Christoph Hellwig) - Use kstrtobool() instead of strtobool (Christophe JAILLET) - Allow unprivileged passthrough of Identify Controller (Joel Granados) - Support io stats on the mpath device (Sagi Grimberg) - Minor nvmet cleanup (Sagi Grimberg) - MD pull requests via Song: - Code cleanups (Christoph) - Various fixes - Floppy pull request from Denis: - Fix a memory leak in the init error path (Yuan) - Series fixing some batch wakeup issues with sbitmap (Gabriel) - Removal of the pktcdvd driver that was deprecated more than 5 years ago, and subsequent removal of the devnode callback in struct block_device_operations as no users are now left (Greg) - Fix for partition read on an exclusively opened bdev (Jan) - Series of elevator API cleanups (Jinlong, Christoph) - Series of fixes and cleanups for blk-iocost (Kemeng) - Series of fixes and cleanups for blk-throttle (Kemeng) - Series adding concurrent support for sync queues in BFQ (Yu) - Series bringing drbd a bit closer to the out-of-tree maintained version (Christian, Joel, Lars, Philipp) - Misc drbd fixes (Wang) - blk-wbt fixes and tweaks for enable/disable (Yu) - Fixes for mq-deadline for zoned devices (Damien) - Add support for read-only and offline zones for null_blk (Shin'ichiro) - Series fixing the delayed holder tracking, as used by DM (Yu, Christoph) - Series enabling bio alloc caching for IRQ based IO (Pavel) - Series enabling userspace peer-to-peer DMA (Logan) - BFQ waker fixes (Khazhismel) - Series fixing elevator refcount issues (Christoph, Jinlong) - Series cleaning up references around queue destruction (Christoph) - Series doing quiesce by tagset, enabling cleanups in drivers (Christoph, Chao) - Series untangling the queue kobject and queue references (Christoph) - Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye, Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph) * tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits) blktrace: Fix output non-blktrace event when blk_classic option enabled block: sed-opal: Don't include <linux/kernel.h> sed-opal: allow using IOC_OPAL_SAVE for locking too blk-cgroup: Fix typo in comment block: remove bio_set_op_attrs nvmet: don't open-code NVME_NS_ATTR_RO enumeration nvme-pci: use the tagset alloc/free helpers nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers nvme: consolidate setting the tagset flags nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set block: bio_copy_data_iter nvme-pci: split out a nvme_pci_ctrl_is_dead helper nvme-pci: return early on ctrl state mismatch in nvme_reset_work nvme-pci: rename nvme_disable_io_queues nvme-pci: cleanup nvme_suspend_queue nvme-pci: remove nvme_pci_disable nvme-pci: remove nvme_disable_admin_queue nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl nvme: use nvme_wait_ready in nvme_shutdown_ctrl ...
2022-12-12Merge tag 'random-6.2-rc1-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Replace prandom_u32_max() and various open-coded variants of it, there is now a new family of functions that uses fast rejection sampling to choose properly uniformly random numbers within an interval: get_random_u32_below(ceil) - [0, ceil) get_random_u32_above(floor) - (floor, U32_MAX] get_random_u32_inclusive(floor, ceil) - [floor, ceil] Coccinelle was used to convert all current users of prandom_u32_max(), as well as many open-coded patterns, resulting in improvements throughout the tree. I'll have a "late" 6.1-rc1 pull for you that removes the now unused prandom_u32_max() function, just in case any other trees add a new use case of it that needs to converted. According to linux-next, there may be two trivial cases of prandom_u32_max() reintroductions that are fixable with a 's/.../.../'. So I'll have for you a final conversion patch doing that alongside the removal patch during the second week. This is a treewide change that touches many files throughout. - More consistent use of get_random_canary(). - Updates to comments, documentation, tests, headers, and simplification in configuration. - The arch_get_random*_early() abstraction was only used by arm64 and wasn't entirely useful, so this has been replaced by code that works in all relevant contexts. - The kernel will use and manage random seeds in non-volatile EFI variables, refreshing a variable with a fresh seed when the RNG is initialized. The RNG GUID namespace is then hidden from efivarfs to prevent accidental leakage. These changes are split into random.c infrastructure code used in the EFI subsystem, in this pull request, and related support inside of EFISTUB, in Ard's EFI tree. These are co-dependent for full functionality, but the order of merging doesn't matter. - Part of the infrastructure added for the EFI support is also used for an improvement to the way vsprintf initializes its siphash key, replacing an sleep loop wart. - The hardware RNG framework now always calls its correct random.c input function, add_hwgenerator_randomness(), rather than sometimes going through helpers better suited for other cases. - The add_latent_entropy() function has long been called from the fork handler, but is a no-op when the latent entropy gcc plugin isn't used, which is fine for the purposes of latent entropy. But it was missing out on the cycle counter that was also being mixed in beside the latent entropy variable. So now, if the latent entropy gcc plugin isn't enabled, add_latent_entropy() will expand to a call to add_device_randomness(NULL, 0), which adds a cycle counter, without the absent latent entropy variable. - The RNG is now reseeded from a delayed worker, rather than on demand when used. Always running from a worker allows it to make use of the CPU RNG on platforms like S390x, whose instructions are too slow to do so from interrupts. It also has the effect of adding in new inputs more frequently with more regularity, amounting to a long term transcript of random values. Plus, it helps a bit with the upcoming vDSO implementation (which isn't yet ready for 6.2). - The jitter entropy algorithm now tries to execute on many different CPUs, round-robining, in hopes of hitting even more memory latencies and other unpredictable effects. It also will mix in a cycle counter when the entropy timer fires, in addition to being mixed in from the main loop, to account more explicitly for fluctuations in that timer firing. And the state it touches is now kept within the same cache line, so that it's assured that the different execution contexts will cause latencies. * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits) random: include <linux/once.h> in the right header random: align entropy_timer_state to cache line random: mix in cycle counter when jitter timer fires random: spread out jitter callback to different CPUs random: remove extraneous period and add a missing one in comments efi: random: refresh non-volatile random seed when RNG is initialized vsprintf: initialize siphash key using notifier random: add back async readiness notifier random: reseed in delayed work rather than on-demand random: always mix cycle counter in add_latent_entropy() hw_random: use add_hwgenerator_randomness() for early entropy random: modernize documentation comment on get_random_bytes() random: adjust comment to account for removed function random: remove early archrandom abstraction random: use random.trust_{bootloader,cpu} command line option only stackprotector: actually use get_random_canary() stackprotector: move get_random_canary() into stackprotector.h treewide: use get_random_u32_inclusive() when possible treewide: use get_random_u32_{above,below}() instead of manual loop treewide: use get_random_u32_below() instead of deprecated function ...
2022-12-08dm thin: Use last transaction's pmd->root when commit failedZhihao Cheng1-0/+9
Recently we found a softlock up problem in dm thin pool btree lookup code due to corrupted metadata: Kernel panic - not syncing: softlockup: hung tasks CPU: 7 PID: 2669225 Comm: kworker/u16:3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: <IRQ> dump_stack+0x9c/0xd3 panic+0x35d/0x6b9 watchdog_timer_fn.cold+0x16/0x25 __run_hrtimer+0xa2/0x2d0 </IRQ> RIP: 0010:__relink_lru+0x102/0x220 [dm_bufio] __bufio_new+0x11f/0x4f0 [dm_bufio] new_read+0xa3/0x1e0 [dm_bufio] dm_bm_read_lock+0x33/0xd0 [dm_persistent_data] ro_step+0x63/0x100 [dm_persistent_data] btree_lookup_raw.constprop.0+0x44/0x220 [dm_persistent_data] dm_btree_lookup+0x16f/0x210 [dm_persistent_data] dm_thin_find_block+0x12c/0x210 [dm_thin_pool] __process_bio_read_only+0xc5/0x400 [dm_thin_pool] process_thin_deferred_bios+0x1a4/0x4a0 [dm_thin_pool] process_one_work+0x3c5/0x730 Following process may generate a broken btree mixed with fresh and stale btree nodes, which could get dm thin trapped in an infinite loop while looking up data block: Transaction 1: pmd->root = A, A->B->C // One path in btree pmd->root = X, X->Y->Z // Copy-up Transaction 2: X,Z is updated on disk, Y write failed. // Commit failed, dm thin becomes read-only. process_bio_read_only dm_thin_find_block __find_block dm_btree_lookup(pmd->root) The pmd->root points to a broken btree, Y may contain stale node pointing to any block, for example X, which gets dm thin trapped into a dead loop while looking up Z. Fix this by setting pmd->root in __open_metadata(), so that dm thin will use the last transaction's pmd->root if commit failed. Fetch a reproducer in [Link]. Linke: https://bugzilla.kernel.org/show_bug.cgi?id=216790 Cc: stable@vger.kernel.org Fixes: 991d9fa02da0 ("dm: add thin provisioning target") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-07block: remove bio_set_op_attrsChristoph Hellwig6-20/+20
This macro is obsolete, so replace the last few uses with open coded bi_opf assignments. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de <mailto:colyli@suse.de>> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221206144057.720846-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-02dm init: add dm-mod.waitfor to wait for asynchronously probed block devicesPeter Korsgaard1-1/+21
Just calling wait_for_device_probe() is not enough to ensure that asynchronously probed block devices are available (E.G. mmc, usb), so add a "dm-mod.waitfor=<device1>[,..,<deviceN>]" parameter to get dm-init to explicitly wait for specific block devices before initializing the tables with logic similar to the rootwait logic that was introduced with commit cc1ed7542c8c ("init: wait for asynchronously scanned block devices"). E.G. with dm-verity on mmc using: dm-mod.waitfor="PARTLABEL=hash-a,PARTLABEL=root-a" [ 0.671671] device-mapper: init: waiting for all devices to be available before creating mapped devices [ 0.671679] device-mapper: init: waiting for device PARTLABEL=hash-a ... [ 0.710695] mmc0: new HS200 MMC card at address 0001 [ 0.711158] mmcblk0: mmc0:0001 004GA0 3.69 GiB [ 0.715954] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB [ 0.722085] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB [ 0.728093] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (249:0) [ 0.738274] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 0.751282] device-mapper: init: waiting for device PARTLABEL=root-a ... [ 0.751306] device-mapper: init: all devices available [ 0.751683] device-mapper: verity: sha256 using implementation "sha256-generic" [ 0.759344] device-mapper: ioctl: dm-0 (vroot) is ready [ 0.766540] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-02md: fold unbind_rdev_from_array into md_kick_rdev_from_arrayChristoph Hellwig1-21/+16
unbind_rdev_from_array is only called from md_kick_rdev_from_array, so merge it into its only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-12-02md: mark md_kick_rdev_from_array staticChristoph Hellwig2-3/+1
md_kick_rdev_from_array is only used in md.c, so unexport it and mark the symbol static. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-12-02md: remove lock_bdev / unlock_bdevChristoph Hellwig1-41/+22
These wrappers for blkdev_get / blkdev_put just horribly confuse the code with their odd naming. Remove them and improve the error unwinding in md_import_device with the now folded code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-12-01dm ioctl: fix a couple ioctl codesMikulas Patocka1-2/+2
Change the ioctl codes from DM_DEV_ARM_POLL to DM_DEV_ARM_POLL_CMD and from DM_GET_TARGET_VERSION to DM_GET_TARGET_VERSION_CMD. Note that the "cmd" field of "struct _ioctls" is never used, thus this commit doesn't fix any bug, it just makes the code consistent. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm ioctl: a small code cleanup in list_version_get_infoMikulas Patocka1-1/+1
No need to modify info->vers if we overwrite it immediately. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm thin: resume even if in FAIL modeLuo Meng1-4/+12
If a thinpool set fail_io while suspending, resume will fail with: device-mapper: resume ioctl on vg-thinpool failed: Invalid argument The thin-pool also can't be removed if an in-flight bio is in the deferred list. This can be easily reproduced using: echo "offline" > /sys/block/sda/device/state dd if=/dev/zero of=/dev/mapper/thin bs=4K count=1 dmsetup suspend /dev/mapper/pool mkfs.ext4 /dev/mapper/thin dmsetup resume /dev/mapper/pool The root cause is maybe_resize_data_dev() will check fail_io and return error before called dm_resume. Fix this by adding FAIL mode check at the end of pool_preresume(). Cc: stable@vger.kernel.org Fixes: da105ed5fd7e ("dm thin metadata: introduce dm_pool_abort_metadata") Signed-off-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm cache: set needs_check flag after aborting metadataMike Snitzer1-5/+5
Otherwise the commit that will be aborted will be associated with the metadata objects that will be torn down. Must write needs_check flag to metadata with a reset block manager. Found through code-inspection (and compared against dm-thin.c). Cc: stable@vger.kernel.org Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag") Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abortMike Snitzer1-7/+47
Same ABBA deadlock pattern fixed in commit 4b60f452ec51 ("dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata") to DM-cache's metadata. Reported-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: stable@vger.kernel.org Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag") Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadataZhihao Cheng1-8/+43
Following concurrent processes: P1(drop cache) P2(kworker) drop_caches_sysctl_handler drop_slab shrink_slab down_read(&shrinker_rwsem) - LOCK A do_shrink_slab super_cache_scan prune_icache_sb dispose_list evict ext4_evict_inode ext4_clear_inode ext4_discard_preallocations ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_read_bh_nowait submit_bh dm_submit_bio do_worker process_deferred_bios commit metadata_operation_failed dm_pool_abort_metadata down_write(&pmd->root_lock) - LOCK B __destroy_persistent_data_objects dm_block_manager_destroy dm_bufio_client_destroy unregister_shrinker down_write(&shrinker_rwsem) thin_map | dm_thin_find_block ↓ down_read(&pmd->root_lock) --> ABBA deadlock , which triggers hung task: [ 76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds. [ 76.976019] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.978521] task:kworker/u4:3 state:D stack:0 pid:63 ppid:2 [ 76.978534] Workqueue: dm-thin do_worker [ 76.978552] Call Trace: [ 76.978564] __schedule+0x6ba/0x10f0 [ 76.978582] schedule+0x9d/0x1e0 [ 76.978588] rwsem_down_write_slowpath+0x587/0xdf0 [ 76.978600] down_write+0xec/0x110 [ 76.978607] unregister_shrinker+0x2c/0xf0 [ 76.978616] dm_bufio_client_destroy+0x116/0x3d0 [ 76.978625] dm_block_manager_destroy+0x19/0x40 [ 76.978629] __destroy_persistent_data_objects+0x5e/0x70 [ 76.978636] dm_pool_abort_metadata+0x8e/0x100 [ 76.978643] metadata_operation_failed+0x86/0x110 [ 76.978649] commit+0x6a/0x230 [ 76.978655] do_worker+0xc6e/0xd90 [ 76.978702] process_one_work+0x269/0x630 [ 76.978714] worker_thread+0x266/0x630 [ 76.978730] kthread+0x151/0x1b0 [ 76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds. [ 76.979756] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.982111] task:test.sh state:D stack:0 pid:2646 ppid:2459 [ 76.982128] Call Trace: [ 76.982139] __schedule+0x6ba/0x10f0 [ 76.982155] schedule+0x9d/0x1e0 [ 76.982159] rwsem_down_read_slowpath+0x4f4/0x910 [ 76.982173] down_read+0x84/0x170 [ 76.982177] dm_thin_find_block+0x4c/0xd0 [ 76.982183] thin_map+0x201/0x3d0 [ 76.982188] __map_bio+0x5b/0x350 [ 76.982195] dm_submit_bio+0x2b6/0x930 [ 76.982202] __submit_bio+0x123/0x2d0 [ 76.982209] submit_bio_noacct_nocheck+0x101/0x3e0 [ 76.982222] submit_bio_noacct+0x389/0x770 [ 76.982227] submit_bio+0x50/0xc0 [ 76.982232] submit_bh_wbc+0x15e/0x230 [ 76.982238] submit_bh+0x14/0x20 [ 76.982241] ext4_read_bh_nowait+0xc5/0x130 [ 76.982247] ext4_read_block_bitmap_nowait+0x340/0xc60 [ 76.982254] ext4_mb_init_cache+0x1ce/0xdc0 [ 76.982259] ext4_mb_load_buddy_gfp+0x987/0xfa0 [ 76.982263] ext4_discard_preallocations+0x45d/0x830 [ 76.982274] ext4_clear_inode+0x48/0xf0 [ 76.982280] ext4_evict_inode+0xcf/0xc70 [ 76.982285] evict+0x119/0x2b0 [ 76.982290] dispose_list+0x43/0xa0 [ 76.982294] prune_icache_sb+0x64/0x90 [ 76.982298] super_cache_scan+0x155/0x210 [ 76.982303] do_shrink_slab+0x19e/0x4e0 [ 76.982310] shrink_slab+0x2bd/0x450 [ 76.982317] drop_slab+0xcc/0x1a0 [ 76.982323] drop_caches_sysctl_handler+0xb7/0xe0 [ 76.982327] proc_sys_call_handler+0x1bc/0x300 [ 76.982331] proc_sys_write+0x17/0x20 [ 76.982334] vfs_write+0x3d3/0x570 [ 76.982342] ksys_write+0x73/0x160 [ 76.982347] __x64_sys_write+0x1e/0x30 [ 76.982352] do_syscall_64+0x35/0x80 [ 76.982357] entry_SYSCALL_64_after_hwframe+0x63/0xcd Function metadata_operation_failed() is called when operations failed on dm pool metadata, dm pool will destroy and recreate metadata. So, shrinker will be unregistered and registered, which could down write shrinker_rwsem under pmd_write_lock. Fix it by allocating dm_block_manager before locking pmd->root_lock and destroying old dm_block_manager after unlocking pmd->root_lock, then old dm_block_manager is replaced with new dm_block_manager under pmd->root_lock. So, shrinker register/unregister could be done without holding pmd->root_lock. Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216676 Cc: stable@vger.kernel.org #v5.2+ Fixes: e49e582965b3 ("dm thin: add read only and fail io modes") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-30dm integrity: Fix UAF in dm_integrity_dtr()Luo Meng1-0/+2
Dm_integrity also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in dm_integrity_dtr(). Cc: stable@vger.kernel.org Fixes: 7eada909bfd7a ("dm: add integrity target") Signed-off-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-30dm cache: Fix UAF in destroy()Luo Meng1-0/+1
Dm_cache also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in destroy(). Cc: stable@vger.kernel.org Fixes: c6b4fcbad044e ("dm: add cache target") Signed-off-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-30dm clone: Fix UAF in clone_dtr()Luo Meng1-0/+1
Dm_clone also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in clone_dtr(). Cc: stable@vger.kernel.org Fixes: 7431b7835f554 ("dm: add clone target") Signed-off-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-30dm thin: Fix UAF in run_timer_softirq()Luo Meng1-0/+2
When dm_resume() and dm_destroy() are concurrent, it will lead to UAF, as follows: BUG: KASAN: use-after-free in __run_timers+0x173/0x710 Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0 <snip> Call Trace: <IRQ> dump_stack_lvl+0x73/0x9f print_report.cold+0x132/0xaa2 _raw_spin_lock_irqsave+0xcd/0x160 __run_timers+0x173/0x710 kasan_report+0xad/0x110 __run_timers+0x173/0x710 __asan_store8+0x9c/0x140 __run_timers+0x173/0x710 call_timer_fn+0x310/0x310 pvclock_clocksource_read+0xfa/0x250 kvm_clock_read+0x2c/0x70 kvm_clock_get_cycles+0xd/0x20 ktime_get+0x5c/0x110 lapic_next_event+0x38/0x50 clockevents_program_event+0xf1/0x1e0 run_timer_softirq+0x49/0x90 __do_softirq+0x16e/0x62c __irq_exit_rcu+0x1fa/0x270 irq_exit_rcu+0x12/0x20 sysvec_apic_timer_interrupt+0x8e/0xc0 One of the concurrency UAF can be shown as below: use free do_resume | __find_device_hash_cell | dm_get | atomic_inc(&md->holders) | | dm_destroy | __dm_destroy | if (!dm_suspended_md(md)) | atomic_read(&md->holders) | msleep(1) dm_resume | __dm_resume | dm_table_resume_targets | pool_resume | do_waker #add delay work | dm_put | atomic_dec(&md->holders) | | dm_table_destroy | pool_dtr | __pool_dec | __pool_destroy | destroy_workqueue | kfree(pool) # free pool time out __do_softirq run_timer_softirq # pool has already been freed This can be easily reproduced using: 1. create thin-pool 2. dmsetup suspend pool 3. dmsetup resume pool 4. dmsetup remove_all # Concurrent with 3 The root cause of this UAF bug is that dm_resume() adds timer after dm_destroy() skips cancelling the timer because of suspend status. After timeout, it will call run_timer_softirq(), however pool has already been freed. The concurrency UAF bug will happen. Therefore, cancelling timer again in __pool_destroy(). Cc: stable@vger.kernel.org Fixes: 991d9fa02da0d ("dm: add thin provisioning target") Signed-off-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-21blk-crypto: don't use struct request_queue for public interfacesChristoph Hellwig1-1/+1
Switch all public blk-crypto interfaces to use struct block_device arguments to specify the device they operate on instead of th request_queue, which is a block layer implementation detail. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-18Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linuxLinus Torvalds3-0/+3
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira) - Memory leak fix in nvmet (Sagi Grimberg) - Regression fix for block cgroups pinning the wrong blkcg, causing leaks of cgroups and blkcgs (Chris) - UAF fix for drbd setup error handling (Dan) - Fix DMA alignment propagation in DM (Keith) * tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux: dm-log-writes: set dma_alignment limit in io_hints dm-integrity: set dma_alignment limit in io_hints block: make blk_set_default_limits() private dm-crypt: provide dma_alignment limit in io_hints block: make dma_alignment a stacking queue_limit nvmet: fix a memory leak in nvmet_auth_set_key nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 drbd: use after free in drbd_create_device() nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro blk-cgroup: properly pin the parent in blkcg_css_online
2022-11-18dm integrity: clear the journal on suspendMikulas Patocka1-0/+13
There was a problem that a user burned a dm-integrity image on CDROM and could not activate it because it had a non-empty journal. Fix this problem by flushing the journal (done by the previous commit) and clearing the journal (done by this commit). Once the journal is cleared, dm-integrity won't attempt to replay it on the next activation. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-18dm integrity: flush the journal on suspendMikulas Patocka1-6/+1
This commit flushes the journal on suspend. It is prerequisite for the next commit that enables activating dm integrity devices in read-only mode. Note that we deliberately didn't flush the journal on suspend, so that the journal replay code would be tested. However, the dm-integrity code is 5 years old now, so that journal replay is well-tested, and we can make this change now. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-18dm bufio: Fix missing decrement of no_sleep_enabled if ↵Zhihao Cheng1-0/+2
dm_bufio_client_create failed The 'no_sleep_enabled' should be decreased in error handling path in dm_bufio_client_create() when the DM_BUFIO_CLIENT_NO_SLEEP flag is set, otherwise static_branch_unlikely() will always return true even if no dm_bufio_client instances have DM_BUFIO_CLIENT_NO_SLEEP flag set. Cc: stable@vger.kernel.org Fixes: 3c1c875d0586 ("dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-18dm ioctl: fix misbehavior if list_versions races with module loadingMikulas Patocka1-2/+2
__list_versions will first estimate the required space using the "dm_target_iterate(list_version_get_needed, &needed)" call and then will fill the space using the "dm_target_iterate(list_version_get_info, &iter_info)" call. Each of these calls locks the targets using the "down_read(&_lock)" and "up_read(&_lock)" calls, however between the first and second "dm_target_iterate" there is no lock held and the target modules can be loaded at this point, so the second "dm_target_iterate" call may need more space than what was the first "dm_target_iterate" returned. The code tries to handle this overflow (see the beginning of list_version_get_info), however this handling is incorrect. The code sets "param->data_size = param->data_start + needed" and "iter_info.end = (char *)vers+len" - "needed" is the size returned by the first dm_target_iterate call; "len" is the size of the buffer allocated by userspace. "len" may be greater than "needed"; in this case, the code will write up to "len" bytes into the buffer, however param->data_size is set to "needed", so it may write data past the param->data_size value. The ioctl interface copies only up to param->data_size into userspace, thus part of the result will be truncated. Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this guarantees that the second "dm_target_iterate" call will write only up to the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it overflows the "needed" space - in this case, userspace will allocate a larger buffer and retry. Note that there is also a bug in list_version_get_needed - we need to add "strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)". Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld1-1/+1
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-16dm-log-writes: set dma_alignment limit in io_hintsKeith Busch1-0/+1
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-6-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm-integrity: set dma_alignment limit in io_hintsKeith Busch1-0/+1
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-5-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm-crypt: provide dma_alignment limit in io_hintsKeith Busch1-0/+1
This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly. Link: https://lore.kernel.org/linux-block/20221101001558.648ee024@xps.demsh.org/ Fixes: b1a000d3b8ec5 ("block: relax direct io memory alignment") Reportred-by: Eric Biggers <ebiggers@kernel.org> Reported-by: Dmitrii Tcvetkov <me@demsh.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221110184501.2451620-3-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm: track per-add_disk holder relations in DMChristoph Hellwig1-10/+39
dm is a bit special in that it opens the underlying devices. Commit 89f871af1b26 ("dm: delay registering the gendisk") tried to accommodate that by allowing to add the holder to the list before add_gendisk and then just add them to sysfs once add_disk is called. But that leads to really odd lifetime problems and error handling problems as we can't know the state of the kobjects and don't unwind properly. To fix this switch to just registering all existing table_devices with the holder code right after add_disk, and remove them before calling del_gendisk. Fixes: 89f871af1b26 ("dm: delay registering the gendisk") Reported-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221115141054.1051801-7-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm: make sure create and remove dm device won't race with open and close tableYu Kuai1-0/+16
open_table_device() and close_table_device() is protected by table_devices_lock, hence use it to protect add_disk() and del_gendisk(). Prepare to track per-add_disk holder relations in dm. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221115141054.1051801-6-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm: cleanup close_table_deviceChristoph Hellwig1-9/+3
Take the list unlink and free into close_table_device so that no half torn down table_devices exist. Also remove the check for a NULL bdev as that can't happen - open_table_device never adds a table_device to the list that does not have a valid block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221115141054.1051801-5-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm: cleanup open_table_deviceChristoph Hellwig1-29/+27
Move all the logic for allocation the table_device and linking it into the list into the open_table_device. This keeps the code tidy and ensures that the table_devices only exist in fully initialized state. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221115141054.1051801-4-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16dm: remove free_table_devicesChristoph Hellwig1-14/+1
free_table_devices just warns and frees all table_device structures when the target removal did not remove them. This should never happen, but if it did, just freeing the structure without deleting them from the list or cleaning up the resources would not help at all. So just WARN on a non-empty list instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221115141054.1051801-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-14md/raid1: stop mdx_raid1 thread when raid1 array run failedJiang Li1-0/+1
fail run raid1 array when we assemble array with the inactive disk only, but the mdx_raid1 thread were not stop, Even if the associated resources have been released. it will caused a NULL dereference when we do poweroff. This causes the following Oops: [ 287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070 [ 287.594762] #PF: supervisor read access in kernel mode [ 287.599912] #PF: error_code(0x0000) - not-present page [ 287.605061] PGD 0 P4D 0 [ 287.607612] Oops: 0000 [#1] SMP NOPTI [ 287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G U 5.10.146 #0 [ 287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022 [ 287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod] [ 287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ...... [ 287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202 [ 287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000 [ 287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800 [ 287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff [ 287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800 [ 287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500 [ 287.692052] FS: 0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000 [ 287.700149] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0 [ 287.713033] Call Trace: [ 287.715498] raid1d+0x6c/0xbbb [raid1] [ 287.719256] ? __schedule+0x1ff/0x760 [ 287.722930] ? schedule+0x3b/0xb0 [ 287.726260] ? schedule_timeout+0x1ed/0x290 [ 287.730456] ? __switch_to+0x11f/0x400 [ 287.734219] md_thread+0xe9/0x140 [md_mod] [ 287.738328] ? md_thread+0xe9/0x140 [md_mod] [ 287.742601] ? wait_woken+0x80/0x80 [ 287.746097] ? md_register_thread+0xe0/0xe0 [md_mod] [ 287.751064] kthread+0x11a/0x140 [ 287.754300] ? kthread_park+0x90/0x90 [ 287.757974] ret_from_fork+0x1f/0x30 In fact, when raid1 array run fail, we need to do md_unregister_thread() before raid1_free(). Signed-off-by: Jiang Li <jiang.li@ugreen.com> Signed-off-by: Song Liu <song@kernel.org>
2022-11-14md/raid5: use bdev_write_cache instead of open coding itChristoph Hellwig2-8/+2
Use the bdev_write_cache instead of two equivalent open coded checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-11-14md: fix a crash in mempool_freeMikulas Patocka1-3/+6
There's a crash in mempool_free when running the lvm test shell/lvchange-rebuild-raid.sh. The reason for the crash is this: * super_written calls atomic_dec_and_test(&mddev->pending_writes) and wake_up(&mddev->sb_wait). Then it calls rdev_dec_pending(rdev, mddev) and bio_put(bio). * so, the process that waited on sb_wait and that is woken up is racing with bio_put(bio). * if the process wins the race, it calls bioset_exit before bio_put(bio) is executed. * bio_put(bio) attempts to free a bio into a destroyed bio set - causing a crash in mempool_free. We fix this bug by moving bio_put before atomic_dec_and_test. We also move rdev_dec_pending before atomic_dec_and_test as suggested by Neil Brown. The function md_end_flush has a similar bug - we must call bio_put before we decrement the number of in-progress bios. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 11557f0067 P4D 11557f0067 PUD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 73 Comm: kworker/0:1 Not tainted 6.1.0-rc3 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: kdelayd flush_expired_bios [dm_delay] RIP: 0010:mempool_free+0x47/0x80 Code: 48 89 ef 5b 5d ff e0 f3 c3 48 89 f7 e8 32 45 3f 00 48 63 53 08 48 89 c6 3b 53 04 7d 2d 48 8b 43 10 8d 4a 01 48 89 df 89 4b 08 <48> 89 2c d0 e8 b0 45 3f 00 48 8d 7b 30 5b 5d 31 c9 ba 01 00 00 00 RSP: 0018:ffff88910036bda8 EFLAGS: 00010093 RAX: 0000000000000000 RBX: ffff8891037b65d8 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8891037b65d8 RBP: ffff8891447ba240 R08: 0000000000012908 R09: 00000000003d0900 R10: 0000000000000000 R11: 0000000000173544 R12: ffff889101a14000 R13: ffff8891562ac300 R14: ffff889102b41440 R15: ffffe8ffffa00d05 FS: 0000000000000000(0000) GS:ffff88942fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000001102e99000 CR4: 00000000000006b0 Call Trace: <TASK> clone_endio+0xf4/0x1c0 [dm_mod] clone_endio+0xf4/0x1c0 [dm_mod] __submit_bio+0x76/0x120 submit_bio_noacct_nocheck+0xb6/0x2a0 flush_expired_bios+0x28/0x2f [dm_delay] process_one_work+0x1b4/0x300 worker_thread+0x45/0x3e0 ? rescuer_thread+0x380/0x380 kthread+0xc2/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: brd dm_delay dm_raid dm_mod af_packet uvesafb cfbfillrect cfbimgblt cn cfbcopyarea fb font fbdev tun autofs4 binfmt_misc configfs ipv6 virtio_rng virtio_balloon rng_core virtio_net pcspkr net_failover failover qemu_fw_cfg button mousedev raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod sd_mod t10_pi crc64_rocksoft crc64 virtio_scsi scsi_mod evdev psmouse bsg scsi_common [last unloaded: brd] CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Song Liu <song@kernel.org>
2022-11-14md/raid0, raid10: Don't set discard sectors for request queueXiao Ni2-3/+0
It should use disk_stack_limits to get a proper max_discard_sectors rather than setting a value by stack drivers. And there is a bug. If all member disks are rotational devices, raid0/raid10 set max_discard_sectors. So the member devices are not ssd/nvme, but raid0/raid10 export the wrong value. It reports warning messages in function __blkdev_issue_discard when mkfs.xfs like this: [ 4616.022599] ------------[ cut here ]------------ [ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0 [ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0 [ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7 [ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246 [ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080 [ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080 [ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000 [ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000 [ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080 [ 4616.213259] FS: 00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000 [ 4616.222298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0 [ 4616.236689] Call Trace: [ 4616.239428] blkdev_issue_discard+0x52/0xb0 [ 4616.244108] blkdev_common_ioctl+0x43c/0xa00 [ 4616.248883] blkdev_ioctl+0x116/0x280 [ 4616.252977] __x64_sys_ioctl+0x8a/0xc0 [ 4616.257163] do_syscall_64+0x5c/0x90 [ 4616.261164] ? handle_mm_fault+0xc5/0x2a0 [ 4616.265652] ? do_user_addr_fault+0x1d8/0x690 [ 4616.270527] ? do_syscall_64+0x69/0x90 [ 4616.274717] ? exc_page_fault+0x62/0x150 [ 4616.279097] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4616.284748] RIP: 0033:0x7f9a55398c6b Signed-off-by: Xiao Ni <xni@redhat.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Song Liu <song@kernel.org>
2022-11-14md/bitmap: Fix bitmap chunk size overflow issuesFlorian-Ewald Mueller1-8/+12
- limit bitmap chunk size internal u64 variable to values not overflowing the u32 bitmap superblock structure variable stored on persistent media - assign bitmap chunk size internal u64 variable from unsigned values to avoid possible sign extension artifacts when assigning from a s32 value The bug has been there since at least kernel 4.0. Steps to reproduce it: 1: mdadm -C /dev/mdx -l 1 --bitmap=internal --bitmap-chunk=256M -e 1.2 -n2 /dev/rnbd1 /dev/rnbd2 2 resize member device rnbd1 and rnbd2 to 8 TB 3 mdadm --grow /dev/mdx --size=max The bitmap_chunksize will overflow without patch. Cc: stable@vger.kernel.org Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Song Liu <song@kernel.org>
2022-11-14md: introduce md_ro_stateYe Bin1-70/+82
Introduce md_ro_state for mddev->ro, so it is easy to understand. Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Song Liu <song@kernel.org>
2022-11-14md: factor out __md_set_array_info()Ye Bin1-30/+35
Factor out __md_set_array_info(). No functional change. Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Song Liu <song@kernel.org>
2022-11-14raid5-cache: use try_cmpxchg in r5l_wake_reclaimUros Bizjak1-2/+3
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in r5l_wake_reclaim. 86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg fails. There is no need to re-read the value in the loop. Note that the value from *ptr should be read using READ_ONCE to prevent the compiler from merging, refetching or reordering the read. No functional change intended. Cc: Song Liu <song@kernel.org> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Song Liu <song@kernel.org>
2022-11-14drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()Li Zhong1-12/+15
Check the return value of md_bitmap_get_counter() in case it returns NULL pointer, which will result in a null pointer dereference. v2: update the check to include other dereference Signed-off-by: Li Zhong <floridsleeves@gmail.com> Signed-off-by: Song Liu <song@kernel.org>
2022-10-18dm clone: Fix typo in block_device format specifierNikos Tsironis1-1/+1
Use %pg for printing the block device name, instead of %pd. Fixes: 385411ffba0c ("dm: stop using bdevname") Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm: remove unnecessary assignment statement in alloc_dev()Genjian Zhang1-1/+0
Fixes: 74fe6ba923949 ("dm: convert to blk_alloc_disk/blk_cleanup_disk") Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm cache: delete the redundant word 'each' in commentShaomin Deng1-1/+1
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm raid: fix typo in analyse_superblocks code commentJiangshan Yi1-1/+1
Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm verity: enable WQ_HIGHPRI on verify_wqNathan Huckleberry1-8/+10
WQ_HIGHPRI increases throughput and decreases disk latency when using dm-verity. This is important in Android for camera startup speed. The following tests were run by doing 60 seconds of random reads using a dm-verity device backed by two ramdisks. Without WQ_HIGHPRI lat (usec): min=13, max=3947, avg=69.53, stdev=50.55 READ: bw=51.1MiB/s (53.6MB/s), 51.1MiB/s-51.1MiB/s (53.6MB/s-53.6MB/s) With WQ_HIGHPRI: lat (usec): min=13, max=7854, avg=31.15, stdev=30.42 READ: bw=116MiB/s (121MB/s), 116MiB/s-116MiB/s (121MB/s-121MB/s) Further testing was done by measuring how long it takes to open a camera on an Android device. Without WQ_HIGHPRI Total verity work queue wait times (ms): 880.960, 789.517, 898.852 With WQ_HIGHPRI: Total verity work queue wait times (ms): 528.824, 439.191, 433.300 The average time to open the camera is reduced by 350ms (or 40-50%). Signed-off-by: Nathan Huckleberry <nhuck@google.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm raid: delete the redundant word 'that' in commentJilin Yuan1-1/+1
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 21:34:11 +0000