summaryrefslogtreecommitdiffstats
path: root/drivers/md
AgeCommit message (Collapse)AuthorFilesLines
2013-05-19dm thin: fix metadata dev resize detectionAlasdair G Kergon1-2/+2
Fix detection of the need to resize the dm thin metadata device. The code incorrectly tried to extend the metadata device when it didn't need to due to a merging error with patch 24347e9 ("dm thin: detect metadata device resizing"). device-mapper: transaction manager: couldn't open metadata space map device-mapper: thin metadata: tm_open_with_sm failed device-mapper: thin: aborting transaction failed device-mapper: thin: switching pool to failure mode Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: set config valueJoe Thornber1-28/+31
Share configuration option processing code between the dm cache ctr and message functions. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: move config fnsAlasdair G Kergon1-17/+17
Move process_config_option() in dm-cache-target.c to make the next patch more readable. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm thin: generate event when metadata threshold passedJoe Thornber3-0/+58
Generate a dm event when the amount of remaining thin pool metadata space falls below a certain level. The threshold is taken to be a quarter of the size of the metadata device with a minimum threshold of 4MB. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm persistent metadata: add space map threshold callbackJoe Thornber1-1/+76
Add a threshold callback to dm persistent data space maps. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm persistent data: add threshold callback to space mapJoe Thornber3-3/+29
Add a threshold callback function to the persistent data space map interface for a subsequent patch to use. dm-thin and dm-cache are interested in knowing when they're getting low on metadata or data blocks. This patch introduces a new method for registering a callback against a threshold. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm thin: detect metadata device resizingJoe Thornber3-3/+64
Allow the dm thin pool metadata device to be extended. Whenever a pool is resumed, detect whether the size of the metadata device has increased, and if so, extend the metadata to use the new space. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm persistent data: support space map resizingJoe Thornber1-6/+32
Support extending a dm persistent data metadata space map. The extend itself is implemented by switching back to the boostrap allocator and pointing to the new space. The extra bitmap indexes are then allocated from the new space, and finally we switch back to the proper space map ops and tweak the reference counts. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm thin: open dev read only when possibleJoe Thornber1-11/+14
If a thin pool is created in read-only-metadata mode then only open the metadata device read-only. Previously it was always opened with FMODE_READ | FMODE_WRITE. (Note that dm_get_device() still allows read-only dm devices to be used read-write at the moment: If I create a read-only linear device for the metadata, via dmsetup load --readonly, then I can still create a rw pool out of it.) Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm thin: refactor data dev resizeJoe Thornber2-33/+64
Refactor device size functions in preparation for similar metadata device resizing functions. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: replace memcpy with struct assignmentJoe Thornber2-3/+3
Use struct assignment rather than memcpy in dm cache. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: fix typos in commentsJoe Thornber1-3/+4
Fix up some typos in dm-cache comments. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache policy: fix description of lookup fnAlasdair G Kergon1-2/+2
Correct the documented requirement on the return code from dm cache policy lookup functions stated in the policy module header file. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm persistent data: fix error message typosJoe Thornber1-4/+4
Fix some typos in dm-space-map-metadata.c error messages. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: tune migration throttlingJoe Thornber1-1/+2
Tune the dm cache migration throttling. i) Issue a tick every second, just in case there's no i/o going through. ii) Drop the migration threshold right down to something suitable for background work. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm mpath: enable WRITE SAME supportMike Snitzer1-0/+1
Enable WRITE SAME support in dm multipath. As far as multipath is concerned it is just another write request. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Tested-by: Bharata B Rao <bharata.rao@gmail.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm table: fix write same supportMike Snitzer1-1/+1
If device_not_write_same_capable() returns true then the iterate_devices loop in dm_table_supports_write_same() should return false. Reported-by: Bharata B Rao <bharata.rao@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.8+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm bufio: avoid a possible __vmalloc deadlockMikulas Patocka1-1/+23
This patch uses memalloc_noio_save to avoid a possible deadlock in dm-bufio. (it could happen only with large block size, at most PAGE_SIZE << MAX_ORDER (typically 8MiB). __vmalloc doesn't fully respect gfp flags. The specified gfp flags are used for allocation of requested pages, structures vmap_area, vmap_block and vm_struct and the radix tree nodes. However, the kernel pagetables are allocated always with GFP_KERNEL. Thus the allocation of pagetables can recurse back to the I/O layer and cause a deadlock. This patch uses the function memalloc_noio_save to set per-process PF_MEMALLOC_NOIO flag and the function memalloc_noio_restore to restore it. When this flag is set, all allocations in the process are done with implied GFP_NOIO flag, thus the deadlock can't happen. This should be backported to stable kernels, but they don't have the PF_MEMALLOC_NOIO flag and memalloc_noio_save/memalloc_noio_restore functions. So, PF_MEMALLOC should be set and restored instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm snapshot: fix error return code in snapshot_ctrWei Yongjun1-0/+1
Return -ENOMEM instead of success if unable to allocate pending exception mempool in snapshot_ctr. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: fix error return code in cache_createWei Yongjun1-0/+1
Return -ENOMEM if memory allocation fails in cache_create instead of 0 (to avoid NULL pointer dereference). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm stripe: fix regression in stripe_width calculationMike Snitzer1-5/+6
Fix a regression in the calculation of the stripe_width in the dm stripe target which led to incorrect processing of device limits. The stripe_width is the stripe device length divided by the number of stripes. The group of commits in the range f14fa69 ("dm stripe: fix size test") to eb850de ("dm stripe: support for non power of 2 chunksize") interfered with each other (a merging error) and led to the stripe_width being set incorrectly to the stripe device length divided by chunk_size * stripe_count. For example, a stripe device's table with: 0 33553920 striped 3 512 ... should result in a stripe_width of 11184640 (33553920 / 3), but due to the bug it was getting set to 21845 (33553920 / (512 * 3)). The impact of this bug is that device topologies that previously worked fine with the stripe target are no longer considered valid. In particular, there is a higher risk of seeing this issue if one of the stripe devices has a 4K logical block size. Resulting in an error message like this: "device-mapper: table: 253:4: len=21845 not aligned to h/w logical block size 4096 of dm-1" The fix is to swap the order of the divisions and to use a temporary variable for the second one, so that width retains the intended value. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-08Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds29-0/+15775
Pull block driver updates from Jens Axboe: "It might look big in volume, but when categorized, not a lot of drivers are touched. The pull request contains: - mtip32xx fixes from Micron. - A slew of drbd updates, this time in a nicer series. - bcache, a flash/ssd caching framework from Kent. - Fixes for cciss" * 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits) bcache: Use bd_link_disk_holder() bcache: Allocator cleanup/fixes cciss: bug fix to prevent cciss from loading in kdump crash kernel cciss: add cciss_allow_hpsa module parameter drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions mtip32xx: Workaround for unaligned writes bcache: Make sure blocksize isn't smaller than device blocksize bcache: Fix merge_bvec_fn usage for when it modifies the bvm bcache: Correctly check against BIO_MAX_PAGES bcache: Hack around stuff that clones up to bi_max_vecs bcache: Set ra_pages based on backing device's ra_pages bcache: Take data offset from the bdev superblock. mtip32xx: mtip32xx: Disable TRIM support mtip32xx: fix a smatch warning bcache: Disable broken btree fuzz tester bcache: Fix a format string overflow bcache: Fix a minor memory leak on device teardown bcache: Documentation updates bcache: Use WARN_ONCE() instead of __WARN() bcache: Add missing #include <linux/prefetch.h> ...
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds11-202/+104
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-07block_device_operations->release() should return voidAl Viro2-6/+2
The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-30bcache: Use bd_link_disk_holder()Kent Overstreet1-17/+35
Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-30bcache: Allocator cleanup/fixesKent Overstreet2-25/+50
The main fix is that bch_allocator_thread() wasn't waiting on garbage collection to finish (if invalidate_buckets had set ca->invalidate_needs_gc); we need that to make sure the allocator doesn't spin and potentially block gc from finishing. Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-30MD: ignore discard request for hard disks of hybid raid1/raid10 arrayShaohua Li2-2/+12
In SSD/hard disk hybid storage, discard request should be ignored for hard disk. We used to be doing this way, but the unplug path forgets it. This is suitable for stable tree since v3.6. Cc: stable@vger.kernel.org Reported-and-tested-by: Markus <M4rkusXXL@web.de> Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-30md: bad block list should default to disabled.NeilBrown1-6/+3
Maintenance of a bad-block-list currently defaults to 'enabled' and is then disabled when it cannot be supported. This is backwards and causes problem for dm-raid which didn't know to disable it. So fix the defaults, and only enabled for v1.x metadata which explicitly has bad blocks enabled. The problem with dm-raid has been present since badblock support was added in v3.1, so this patch is suitable for any -stable from 3.1 onwards. Cc: stable@vger.kernel.org (3.1+) Reported-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-30md: raid1/raid10 md devices leak memory when stoppingHirokazu Takahashi2-0/+2
Hi. Raid1 and raid10 devices leak memory every time they stop. This is a patch for linux-3.9.0-rc7 to fix this problem. Thanks, Hirokazu Takahashi. Signed-off-by: Hirokazu Takahashi <taka@valinux.co.jp> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24bcache: Make sure blocksize isn't smaller than device blocksizeKent Overstreet1-2/+6
Sanity check to make sure we don't end up doing IO the device doesn't support. Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-24DM RAID: Add message/status support for changing sync actionJonathan Brassow1-2/+109
DM RAID: Add message/status support for changing sync action This patch adds a message interface to dm-raid to allow the user to more finely control the sync actions being performed by the MD driver. This gives the user the ability to initiate "check" and "repair" (i.e. scrubbing). Two additional fields have been appended to the status output to provide more information about the type of sync action occurring and the results of those actions, specifically: <sync_action> and <mismatch_cnt>. These new fields will always be populated. This is essentially the device-mapper way of doing what MD controls through the 'sync_action' sysfs file and shows through the 'mismatch_cnt' sysfs file. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24MD: Export 'md_reap_sync_thread' functionJonathan Brassow2-50/+50
MD: Export 'md_reap_sync_thread' function Make 'md_reap_sync_thread' available to other files, specifically dm-raid.c. - rename reap_sync_thread to md_reap_sync_thread - move the fn after md_check_recovery to match md.h declaration placement - export md_reap_sync_thread Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md: don't update metadata when stopping a read-only array.NeilBrown1-1/+2
read-only arrays should stay that way as much as possible. Updating the metadata - which could be triggered by a re-add while assembling the array metadata - should be avoided. Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md: Allow devices to be re-added to a read-only array.NeilBrown1-26/+57
When assembling an array incrementally we might want to make it device available when "enough" devices are present, but maybe not "all" devices are present. If the remaining devices appear before the array is actually used, they should be added transparently. We do this by using the "read-auto" mode where the array acts like it is read-only until a write request arrives. Current an add-device request switches a read-auto array to active. This means that only one device can be added after the array is first made read-auto. This isn't a problem for RAID5, but is not ideal for RAID6 or RAID10. Also we don't really want to switch the array to read-auto at all when re-adding a device as this doesn't really imply any change. So: - remove the "md_update_sb()" call from add_new_disk(). This isn't really needed as just adding a disk doesn't require a metadata update. Instead, just set MD_CHANGE_DEVS. This will effect a metadata update soon enough, once the array is not read-only. - Allow the ADD_NEW_DISK ioctl to succeed without activating a read-auto array, providing the MD_DISK_SYNC flag is set. In this case, the device will be rejected if it cannot be added with the correct device number, or has an incorrect event count. - Teach remove_and_add_spares() to be careful about adding spares when the array is read-only (or read-mostly) - only add devices that are thought to be in-sync, and only do it if the array is in-sync itself. - In md_check_recovery, use remove_and_add_spares in the read-only case, rather than open coding just the 'remove' part of it. Reported-by: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md/raid10: Allow skipping recovery when clean arrays are assembledMartin Wilck1-0/+16
When an array is assembled incrementally with mdadm -I -R and the array switches to "active" mode, md starts a recovery. If the array was clean, the "fullsync" flag will be 0. Skip the full recovery in this case, as RAID1 does (the code was actually copied from the sync_request() method of RAID1). Signed-off-by: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md/raid5: avoid an extra write when writing to a known-bad-block.NeilBrown1-1/+8
If we write to a known-bad-block it will be flags as having a ReadError by analyse_stripe, but the write will proceed anyway (as it should). Then the read-error handling will kick in an write again, then re-read. We don't need that 'write-again', so set R5_ReWrite so it looks like it has already been done. Then we will just get the re-read, which we want. Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md/raid5: Change or of some order to improve efficiency.majianpeng1-3/+4
As the function call is the most expensive of these tests it should be done later in the chain so that it can be avoided in some cases. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md: use set_bit_le and clear_bit_leAkinobu Mita1-2/+2
The value returned by test_and_set_bit_le() drivers/md/bitmap.c is not used. So just use set_bit_le(). The same goes for test_and_clear_bit_le(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md: HOT_DISK_REMOVE shouldn't make a read-auto device active.NeilBrown1-4/+7
If a fail device or a spare is removed from an array, there is not need to make the array 'active'. If/when the array does become active for some other reason the metadata will be update to reflect the removal. If that never happens and the array is stopped while still read-auto, then there is no loss in forgetting the that the device had 'failed'. A read-only array will leave failed devices attached to the array personality, so we need to explicitly call remove_and_add_spares() to free it (clearing Blocked just like we do in store_slot()). Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md: use common code for all calls to ->hot_remove_disk()NeilBrown1-9/+16
slot_store and remove_and_add_spares both call ->hot_remove_disk(), but with slightly different tests and consequences, which is at least untidy and might be buggy. So modify remove_and_add_spaces() so that it can be asked to remove a specific device, and call it from slot_store(). We also clear the Blocked flag to ensure that doesn't prevent removal. The purpose of Blocked is to prevent automatic removal by the kernel before an error is acknowledged. If the array is read/write then user-space would have not reason to remove a device unless it was known to be 'spare' or 'faulty' in which it would have already cleared the Blocked flag. If the array is read-only, the flag might still be blocked, but there is no harm in clearing the flag for read-only arrays. Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24md: never update metadata when array is read-only.NeilBrown1-0/+5
Normally we don't even try to update the metadata if the array is read-only. However future patches will increase the number of things that can happen on a read-only array, so it is safest to explicitly disable this. Every time that mddev->ro is set to 0, either - md_update_sb will be called again (at least if MD_CHANGE_DEVS is set) or - the mddev->thread is scheduled, which will also run md_update_sb if needed. So this is safe: if the array ever become read-write the metadata will be updated. Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-22bcache: Fix merge_bvec_fn usage for when it modifies the bvmKent Overstreet1-9/+8
Stacked md devices reuse the bvm for the subordinate device, causing problems... Reported-by: Michael Balser <michael.balser@profitbricks.com> Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-20bcache: Correctly check against BIO_MAX_PAGESKent Overstreet1-5/+4
bch_bio_max_sectors() was checking against BIO_MAX_PAGES as if the limit was for the total bytes in the bio, not the number of segments. Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-20bcache: Hack around stuff that clones up to bi_max_vecsKent Overstreet1-0/+9
Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-20bcache: Set ra_pages based on backing device's ra_pagesKent Overstreet1-0/+4
Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-20bcache: Take data offset from the bdev superblock.Kent Overstreet3-57/+100
Add a new superblock version, and consolidate related defines. Signed-off-by: Gabriel de Perthuis <g2p.code+bcache@gmail.com> Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-18Revert "block: add missing block_bio_complete() tracepoint"Linus Torvalds2-1/+11
This reverts commit 3a366e614d0837d9fc23f78cdb1a1186ebc3387f. Wanlong Gao reports that it causes a kernel panic on his machine several minutes after boot. Reverting it removes the panic. Jens says: "It's not quite clear why that is yet, so I think we should just revert the commit for 3.9 final (which I'm assuming is pretty close). The wifi is crap at the LSF hotel, so sending this email instead of queueing up a revert and pull request." Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Requested-by: Jens Axboe <axboe@kernel.dk> Cc: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-08bcache: Disable broken btree fuzz testerKent Overstreet1-2/+4
Reported-by: <sasha.levin@oracle.com> Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-08bcache: Fix a format string overflowKent Overstreet1-2/+2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-04-08bcache: Fix a minor memory leak on device teardownKent Overstreet1-1/+3
Reported-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <koverstreet@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 22:53:42 +0000