summaryrefslogtreecommitdiffstats
path: root/drivers/md
AgeCommit message (Collapse)AuthorFilesLines
2009-03-16dm crypt: wait for endio to complete before destructionMilan Broz2-20/+29
The following oops has been reported when dm-crypt runs over a loop device. ... [ 70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000) ... [ 70.381058] Call Trace: [ 70.381058] [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt] [ 70.381058] [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt] [ 70.381058] [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod] [ 70.381058] [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod] [ 70.381058] [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<c02bad86>] ? loop_thread+0x380/0x3b7 [ 70.381058] [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165 [ 70.381058] [<c013754f>] ? autoremove_wake_function+0x0/0x33 [ 70.381058] [<c02baa06>] ? loop_thread+0x0/0x3b7 When a table is being replaced, it waits for I/O to complete before destroying the mempool, but the endio function doesn't call mempool_free() until after completing the bio. Fix it by swapping the order of those two operations. The same problem occurs in dm.c with md referenced after dec_pending. Again, we swap the order. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16dm crypt: fix kcryptd_async_done parameterHuang Ying1-5/+21
In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16dm io: respect BIO_MAX_PAGES limitMikulas Patocka1-0/+2
dm-io calls bio_get_nr_vecs to get the maximum number of pages to use for a given device. It allocates one additional bio_vec to use internally but failed to respect BIO_MAX_PAGES, so fix this. This was the likely cause of: https://bugzilla.redhat.com/show_bug.cgi?id=173153 Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16dm table: rework reference counting fixMikulas Patocka1-2/+2
Fix an error introduced in dm-table-rework-reference-counting.patch. When there is failure after table initialization, we need to use dm_table_destroy, not dm_table_put, to free the table. dm_table_put may be used only after dm_table_get. Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16dm ioctl: validate name length when renamingMilan Broz1-1/+2
When renaming a mapped device validate the length of the new name. The rename ioctl accepted any correctly-terminated string enclosed within the data passed from userspace. The other ioctls enforce a size limit of DM_NAME_LEN. If the name is changed and becomes longer than that, the device can no longer be addressed by name. Fix it by properly checking for device name length (including terminating zero). Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-04md: fix deadlock when stopping arraysDan Williams1-12/+18
Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-02-25md: avoid races when stopping resync.NeilBrown2-4/+6
There has been a race in raid10 and raid1 for a long time which has only recently started showing up due to a scheduler changed. When a sync_read request finishes, as soon as reschedule_retry is called, another thread can mark the resync request as having completed, so md_do_sync can finish, ->stop can be called, and ->conf can be freed. So using conf after reschedule_retry is not safe. Similarly, when finishing a sync_write, calling md_done_sync must be the last thing we do, as it allows a chain of events which will free conf and other data structures. The first of these requires action in raid10.c The second requires action in raid1.c and raid10.c Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-25md/raid10: Don't call bitmap_cond_end_sync when we are doing recovery.NeilBrown1-2/+2
For raid1/4/5/6, resync (fixing inconsistencies between devices) is very similar to recovery (rebuilding a failed device onto a spare). The both walk through the device addresses in order. For raid10 it can be quite different. resync follows the 'array' address, and makes sure all copies are the same. Recover walks through 'device' addresses and recreates each missing block. The 'bitmap_cond_end_sync' function allows the write-intent-bitmap (When present) to be updated to reflect a partially completed resync. It makes assumptions which mean that it does not work correctly for raid10 recovery at all. In particularly, it can cause bitmap-directed recovery of a raid10 to not recovery some of the blocks that need to be recovered. So move the call to bitmap_cond_end_sync into the resync path, rather than being in the common "resync or recovery" path. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-25md/raid10: Don't skip more than 1 bitmap-chunk at a time during recovery.NeilBrown1-4/+4
When doing recovery on a raid10 with a write-intent bitmap, we only need to recovery chunks that are flagged in the bitmap. However if we choose to skip a chunk as it isn't flag, the code currently skips the whole raid10-chunk, thus it might not recovery some blocks that need recovering. This patch fixes it. In case that is confusing, it might help to understand that there is a 'raid10 chunk size' which guides how data is distributed across the devices, and a 'bitmap chunk size' which says how much data corresponds to a single bit in the bitmap. This bug only affects cases where the bitmap chunk size is smaller than the raid10 chunk size. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-18block: fix bad definition of BIO_RW_SYNCJens Axboe3-4/+4
We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417fec62ef4c3675621b9364a667954d4dd. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-06md: Ensure an md array never has too many devices.NeilBrown1-10/+14
Each different metadata format supported by md supports a different maximum number of devices. We really should be enforcing this maximum in the kernel, but we aren't quite doing that properly. We currently only enforce it at the 'hot_add' point, which is an older interface which is not used by current userspace. We need to also enforce it at 'add_new_disk' time for active arrays and at 'do_md_run' time when starting a new array. So move the test from 'hot_add' into 'bind_rdev_to_array' which is called from both 'hot_add' and 'add_new_disk, and add a new test in 'analyse_sbs' which is called from 'do_md_run'. This bug (or missing feature) has been around "forever" and so the patch is suitable for any -stable that is currently maintained. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-06md: Fix a bug in linear.c causing which_dev() to return the wrong device.Andre Noll1-3/+3
ab5bd5cbc8d4b868378d062eed3d4240930fbb86 introduced the following bug in linear software raid for large arrays on 32 bit machines: which_dev() computes the device holding a given sector by shifting down the sector number to a 32 bit range, dividing by the array spacing and looking up the resulting index in the hash table of the array. Because the computed index might be slightly too small, a loop at the end of which_dev() increases the index until the given sector actually falls into the range of the device associated with that index. The changes of the above mentioned commit caused this loop to check whether the _index_ rather than the sector number is small enough, effectively bypassing the loop and thus possibly returning the wrong device. As reported by Simon Kirby, this leads to errors such as linear_make_request: Sector 2340486136 out of bounds on dev sdi: 156301312 sectors, offset 2109870464 Fix this bug by introducing a local variable for the index so that the variable containing the passed sector is left unchanged. Cc: stable@kernel.org Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-06md: Allow read error in a single drive raid1 to be passed up.NeilBrown1-1/+2
If a raid1 only has a single working device and gets a read error, we choose to simply return that error up to the filesystem (or whatever) rather than failing the whole array. However the codes doesn't quite do that. We attempt a readbalance which allocates the same drive, so we retry the read - indefinitely. Instead: If read_balance in the error case chooses the same drive that just failed, treat it as a failure and don't retry. Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: don't retry recovery of raid1 that fails due to error on source drive.NeilBrown2-3/+10
If a raid1 has only one working drive and it has a sector which gives an error on read, then an attempt to recover onto a spare will fail, but as the single remaining drive is not removed from the array, the recovery will be immediately re-attempted, resulting in an infinite recovery loop. So detect this situation and don't retry recovery once an error on the lone remaining drive is detected. Allow recovery to be retried once every time a spare is added in case the problem wasn't actually a media error. Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: Allow md devices to be created by name.NeilBrown1-18/+101
Using sequential numbers to identify md devices is somewhat artificial. Using names can be a lot more user-friendly. Also, creating md devices by opening the device special file is a bit awkward. So this patch provides a new option for creating and naming devices. Writing a name such as "md_home" to /sys/modules/md_mod/parameters/new_array will cause an array with that name to be created. It will appear in /sys/block/ /proc/partitions and /proc/mdstat as 'md_home'. It will have an arbitrary minor number allocated. md devices that a created by an open are destroyed on the last close when the device is inactive. For named md devices, they will not be destroyed until the array is explicitly stopped, either with the STOP_ARRAY ioctl or by writing 'clear' to /sys/block/md_XXXX/md/array_state. The name of the array must start 'md_' to avoid conflict with other devices. Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: make devices disappear when they are no longer needed.NeilBrown1-12/+49
Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: centralise all freeing of an 'mddev' in 'md_free'NeilBrown1-9/+11
md_free is the .release handler for the md kobj_type. So it makes sense to release all the objects referenced by the mddev in there, rather than just prior to calling kobject_put for what we think is the last time. Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: move allocation of ->queue from mddev_find to md_probeNeilBrown1-11/+17
It is more balanced to just do simple initialisation in mddev_find, which allocates and links a new md device, and leave all the more sophisticated allocation to md_probe (which calls mddev_find). md_probe already allocated the gendisk. It should allocate the queue too. Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: need another print_sb for mdp_superblock_1Cheng Renquan1-6/+60
md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: use list_for_each_entry macro directlyCheng Renquan9-87/+56
The rdev_for_each macro defined in <linux/raid/md_k.h> is identical to list_for_each_entry_safe, from <linux/list.h>, it should be defined to use list_for_each_entry_safe, instead of reinventing the wheel. But some calls to each_entry_safe don't really need a safe version, just a direct list_for_each_entry is enough, this could save a temp variable (tmp) in every function that used rdev_for_each. In this patch, most rdev_for_each loops are replaced by list_for_each_entry, totally save many tmp vars; and only in the other situations that will call list_del to delete an entry, the safe version is used. Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0: make hash_spacing and preshift sector-based.Andre Noll1-29/+29
This patch renames the hash_spacing and preshift members of struct raid0_private_data to spacing and sector_shift respectively and changes the semantics as follows: We always have spacing = 2 * hash_spacing. In case sizeof(sector_t) > sizeof(u32) we also have sector_shift = preshift + 1 while sector_shift = preshift = 0 otherwise. Note that the values of nb_zone and zone are unaffected by these changes because in the sector_div() preceeding the assignement of these two variables both arguments double. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0: Represent the size of strip zones in sectors.Andre Noll1-13/+13
This completes the block -> sector conversion of struct strip_zone. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0 create_strip_zones(): Add KERN_INFO/KERN_ERR to printk's.Andre Noll1-21/+25
This patch consists only of these trivial changes. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0 create_strip_zones(): Make two local variables sector-based.Andre Noll1-14/+13
current_offset and curr_zone_offset stored the corresponding offsets as 1K quantities. Rename them to current_start and curr_zone_start to match the naming of struct strip_zone and store the offsets as sector counts. Also, add KERN_INFO to the printk() affected by this change to make checkpatch happy. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0: Represent zone->zone_offset in sectors.Andre Noll1-6/+6
For the same reason as in the previous patch, rename it from zone_offset to zone_start. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0: Represent device offset in sectors.Andre Noll1-5/+4
Rename zone->dev_offset to zone->dev_start to make sure all users have been converted. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0_make_request(): Replace local variable block by sector.Andre Noll1-7/+6
This change already simplifies the code a bit. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0_make_request(): Remove local variable chunk_size.Andre Noll1-4/+3
We might as well use chunk_sects instead. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: raid0_make_request(): Replace chunksize_bits by chunksect_bits.Andre Noll1-5/+5
As ffz(~(2 * x)) = ffz(~x) + 1, we have chunksect_bits = chunksize_bits + 1. Fixup all users accordingly. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: use sysfs_notify_dirent to notify changes to md/sync_action.NeilBrown1-7/+13
There is no compelling need for this, but sysfs_notify_dirent is a nicer interface and the change is good for consistency. Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09md: fix bitmap-on-external-file bug.NeilBrown1-3/+5
commit a2ed9615e3222645007fc19991aedf30eed3ecfd fixed a bug with 'internal' bitmaps, but in the process broke 'in a file' bitmaps. So they are broken in 2.6.28 This fixes it, and needs to go in 2.6.28-stable. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2009-01-06dm snapshot: extend exception store functionsJonathan Brassow6-37/+55
Supply dm_add_exception as a callback to the read_metadata function. Add a status function ready for a later patch and name the functions consistently. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm snapshot: split out exception store implementationsAlasdair G Kergon6-737/+833
Move the existing snapshot exception store implementations out into separate files. Later patches will place these behind a new interface in preparation for alternative implementations. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm snapshot: rename struct exception_storeJonathan Brassow3-24/+25
Rename struct exception_store to dm_exception_store. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm snapshot: separate out exception store interfaceJonathan Brassow4-120/+134
Pull structures that bridge the gap between snapshot and exception store out of dm-snap.h and put them in a new .h file - dm-exception-store.h. This file will define the API for new exception stores. Ultimately, dm-snap.h is unnecessary, since only dm-snap.c should be using it. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm mpath: move trigger_event to system workqueueAlasdair G Kergon1-4/+4
The same workqueue is used both for sending uevents and processing queued I/O. Deadlock has been reported in RHEL5 when sending a uevent was blocked waiting for the queued I/O to be processed. Use scheduled_work() for the asynchronous uevents instead. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm: add name and uuid to sysfsMilan Broz4-2/+136
Implement simple read-only sysfs entry for device-mapper block device. This patch adds a simple sysfs directory named "dm" under block device properties and implements - name attribute (string containing mapped device name) - uuid attribute (string containing UUID, or empty string if not set) The kobject is embedded in mapped_device struct, so no additional memory allocation is needed for initializing sysfs entry. During the processing of sysfs attribute we need to lock mapped device which is done by a new function dm_get_from_kobj, which returns the md associated with kobject and increases the usage count. Each 'show attribute' function is responsible for its own locking. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm table: rework reference countingMikulas Patocka4-20/+33
Rework table reference counting. The existing code uses a reference counter. When the last reference is dropped and the counter reaches zero, the table destructor is called. Table reference counters are acquired/released from upcalls from other kernel code (dm_any_congested, dm_merge_bvec, dm_unplug_all). If the reference counter reaches zero in one of the upcalls, the table destructor is called from almost random kernel code. This leads to various problems: * dm_any_congested being called under a spinlock, which calls the destructor, which calls some sleeping function. * the destructor attempting to take a lock that is already taken by the same process. * stale reference from some other kernel code keeps the table constructed, which keeps some devices open, even after successful return from "dmsetup remove". This can confuse lvm and prevent closing of underlying devices or reusing device minor numbers. The patch changes reference counting so that the table destructor can be called only at predetermined places. The table has always exactly one reference from either mapped_device->map or hash_cell->new_map. After this patch, this reference is not counted in table->holders. A pair of dm_create_table/dm_destroy_table functions is used for table creation/destruction. Temporary references from the other code increase table->holders. A pair of dm_table_get/dm_table_put functions is used to manipulate it. When the table is about to be destroyed, we wait for table->holders to reach 0. Then, we call the table destructor. We use active waiting with msleep(1), because the situation happens rarely (to one user in 5 years) and removing the device isn't performance-critical task: the user doesn't care if it takes one tick more or not. This way, the destructor is called only at specific points (dm_table_destroy function) and the above problems associated with lazy destruction can't happen. Finally remove the temporary protection added to dm_any_congested(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm: support barriers on simple devicesAndi Kleen4-10/+26
Implement barrier support for single device DM devices This patch implements barrier support in DM for the common case of dm linear just remapping a single underlying device. In this case we can safely pass the barrier through because there can be no reordering between devices. NB. Any DM device might cease to support barriers if it gets reconfigured so code must continue to allow for a possible -EOPNOTSUPP on every barrier bio submitted. - agk Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm request: add cachesKiyoshi Ueda1-1/+40
This patch prepares some kmem_caches for request-based dm. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm ioctl: allow dm_copy_name_and_uuid to return only one fieldMilan Broz1-2/+4
Allow NULL buffer in dm_copy_name_and_uuid if you only want to return one of the fields. (Required by a following patch that adds these fields to sysfs.) Signed-off-by: Milan Broz <mbroz@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm log: ensure log bitmap fits on log deviceMilan Broz1-0/+8
Check that the log bitmap will fit within the log device. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm log: move region_size validationMilan Broz2-14/+14
Move log size validation from mirror target to log constructor. Removed PAGE_SIZE restriction we no longer think necessary. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm log: avoid reinitialising io_req on every operationTakahiro Yasui1-10/+7
rw_header function updates three members of io_req data every time when I/O is processed. bi_rw and notify.fn are never modified once they get initialized, and so they can be set in advance. header_to_disk() can also be pulled out of write_header() since only one caller needs it and write_header() can be replaced by rw_header() directly. Signed-off-by: Takahiro Yasui <tyasui@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm: consolidate target deregistration error handlingMikulas Patocka9-48/+16
Change dm_unregister_target to return void and use BUG() for error reporting. dm_unregister_target can only fail because of programming bug in the target driver. It can't fail because of user's behavior or disk errors. This patch changes unregister_target to return void and use BUG if someone tries to unregister non-registered target or unregister target that is in use. This patch removes code duplication (testing of error codes in all dm targets) and reports bugs in just one place, in dm_unregister_target. In some target drivers, these return codes were ignored, which could lead to a situation where bugs could be missed. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm raid1: fix error countJonathan Brassow1-3/+3
Always increase the error count when I/O on a leg of a mirror fails. The error count is used to decide whether to select an alternative mirror leg. If the target doesn't use the "handle_errors" feature, the error count is not updated and the bio can get requeued forever by the read callback. Fix it by increasing error_count before the handle_errors feature checking. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm log: fix dm_io_client leak on error pathsTakahiro Yasui1-0/+5
In create_log_context function, dm_io_client_destroy function needs to be called, when memory allocation of disk_header, sync_bits and recovering_bits failed, but dm_io_client_destroy is not called. Cc: stable@kernel.org Signed-off-by: Takahiro Yasui <tyasui@redhat.com> Acked-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm snapshot: change yield to msleepMikulas Patocka1-3/+4
Change yield() to msleep(1). If the thread had realtime priority, yield() doesn't really yield, so the yielding process would loop indefinitely and cause machine lockup. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06dm table: drop reference at unbindMikulas Patocka1-1/+1
Move one dm_table_put() so that the last reference in the thread gets dropped in __unbind(). This is required for a following patch, dm-table-rework-reference-counting.patch, which will change the logic in such a way that table destructor is called only at specific points in the code. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-12-29bio: allow individual slabs in the bio_setJens Axboe3-3/+3
Instead of having a global bio slab cache, add a reference to one in each bio_set that is created. This allows for personalized slabs in each bio_set, so that they can have bios of different sizes. This means we can personalize the bios we return. File systems may want to embed the bio inside another structure, to avoid allocation more items (and stuffing them in ->bi_private) after the get a bio. Or we may want to embed a number of bio_vecs directly at the end of a bio, to avoid doing two allocations to return a bio. This is now possible. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>