summaryrefslogtreecommitdiffstats
path: root/drivers/md/dm-crypt.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-09dm crypt: implement eboiv - encrypted byte-offset initialization vectorMilan Broz1-1/+81
This IV is used in some BitLocker devices with CBC encryption mode. IV is encrypted little-endian byte-offset (with the same key and cipher as the volume). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09dm crypt: remove obsolete comment about plumb IVMilan Broz1-3/+0
The URL is no longer valid and the comment is obsolete anyway (the plumb IV was never used). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09dm crypt: wipe private IV struct after key invalid flag is setMilan Broz1-7/+9
If a private IV wipe function fails, the code does not set the key invalid flag. To fix this, move code to after the flag is set to prevent the device from resuming in an inconsistent state. Also, this allows using of a randomized key in private wipe function (to be used in a following commit). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09dm crypt: use struct_size() when allocating encryption contextZhengyuan Liu1-1/+1
Use struct_size() to avoid open-coded equivalent that is prone to a type mistake. Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-16Merge tag 'for-5.2/dm-changes-v2' of ↵Linus Torvalds1-11/+15
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Improve DM snapshot target's scalability by using finer grained locking. Requires some list_bl interface improvements. - Add ability for DM integrity to use a bitmap mode, that tracks regions where data and metadata are out of sync, instead of using a journal. - Improve DM thin provisioning target to not write metadata changes to disk if the thin-pool and associated thin devices are merely activated but not used. This avoids metadata corruption due to concurrent activation of thin devices across different OS instances (e.g. split brain scenarios, which ultimately would be avoided if proper device filters were used -- but not having proper filtering has proven a very common configuration mistake) - Fix missing call to path selector type->end_io in DM multipath. This fixes reported performance problems due to inaccurate path selector IO accounting causing an imbalance of IO (e.g. avoiding issuing IO to particular path due to it seemingly being heavily used). - Fix bug in DM cache metadata's loading of its discard bitset that could lead to all cache blocks being discarded if the very first cache block was discarded (thankfully in practice the first cache block is generally in use; be it FS superblock, partition table, disk label, etc). - Add testing-only DM dust target which simulates a device that has failing sectors and/or read failures. - Fix a DM init error path reference count hang that caused boot hangs if user supplied malformed input on kernel commandline. - Fix a couple issues with DM crypt target's logging being overly verbose or lacking context. - Various other small fixes to DM init, DM multipath, DM zoned, and DM crypt. * tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (42 commits) dm: fix a couple brace coding style issues dm crypt: print device name in integrity error message dm crypt: move detailed message into debug level dm ioctl: fix hang in early create error condition dm integrity: whitespace, coding style and dead code cleanup dm integrity: implement synchronous mode for reboot handling dm integrity: handle machine reboot in bitmap mode dm integrity: add a bitmap mode dm integrity: introduce a function add_new_range_and_wait() dm integrity: allow large ranges to be described dm ingerity: pass size to dm_integrity_alloc_page_list() dm integrity: introduce rw_journal_sectors() dm integrity: update documentation dm integrity: don't report unused options dm integrity: don't check null pointer before kvfree and vfree dm integrity: correctly calculate the size of metadata area dm dust: Make dm_dust_init and dm_dust_exit static dm dust: remove redundant unsigned comparison to less than zero dm mpath: always free attached_handler_name in parse_path() dm init: fix max devices/targets checks ...
2019-05-16dm crypt: print device name in integrity error messageMilan Broz1-3/+6
This message should better identify the DM device with the integrity failure. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-16dm crypt: move detailed message into debug levelMilan Broz1-4/+5
The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance. Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device). Cc: stable@vger.kernel.org Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-07Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...
2019-04-30block: remove the i argument to bio_for_each_segment_allChristoph Hellwig1-2/+1
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers1-3/+0
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18dm crypt: fix endianness annotations around org_sector_of_dmreqChristoph Hellwig1-4/+4
The sector used here is a little endian value, so use the right type for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-03-08Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull block layer updates from Jens Axboe: "Not a huge amount of changes in this round, the biggest one is that we finally have Mings multi-page bvec support merged. Apart from that, this pull request contains: - Small series that avoids quiescing the queue for sysfs changes that match what we currently have (Aleksei) - Series of bcache fixes (via Coly) - Series of lightnvm fixes (via Mathias) - NVMe pull request from Christoph. Nothing major, just SPDX/license cleanups, RR mp policy (Hannes), and little fixes (Bart, Chaitanya). - BFQ series (Paolo) - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection for the fast path (Jianchao) - fops->iopoll() added for async IO polling, this is a feature that the upcoming io_uring interface will use (Christoph, me) - Partition scan loop fixes (Dongli) - mtip32xx conversion from managed resource API (Christoph) - cdrom registration race fix (Guenter) - MD pull from Song, two minor fixes. - Various documentation fixes (Marcos) - Multi-page bvec feature. This brings a lot of nice improvements with it, like more efficient splitting, larger IOs can be supported without growing the bvec table size, and so on. (Ming) - Various little fixes to core and drivers" * tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits) block: fix updating bio's front segment size block: Replace function name in string with __func__ nbd: propagate genlmsg_reply return code floppy: remove set but not used variable 'q' null_blk: fix checking for REQ_FUA block: fix NULL pointer dereference in register_disk fs: fix guard_bio_eod to check for real EOD errors blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map block: optimize bvec iteration in bvec_iter_advance block: introduce mp_bvec_for_each_page() for iterating over page block: optimize blk_bio_segment_split for single-page bvec block: optimize __blk_segment_map_sg() for single-page bvec block: introduce bvec_nth_page() iomap: wire up the iopoll method block: add bio_set_polled() helper block: wire up block device iopoll method fs: add an iopoll method to struct file_operations loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part() loop: do not print warn message if partition scan is successful block: bounce: make sure that bvec table is updated ...
2019-02-15block: allow bio_for_each_segment_all() to iterate over multi-page bvecMing Lei1-1/+2
This patch introduces one extra iterator variable to bio_for_each_segment_all(), then we can allow bio_for_each_segment_all() to iterate over multi-page bvec. Given it is just one mechannical & simple change on all bio_for_each_segment_all() users, this patch does tree-wide change in one single patch, so that we can avoid to use a temporary helper for this conversion. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11dm crypt: don't overallocate the integrity tag spaceMikulas Patocka1-1/+1
bio_sectors() returns the value in the units of 512-byte sectors (no matter what the real sector size of the device). dm-crypt multiplies bio_sectors() by on_disk_tag_size to calculate the space allocated for integrity tags. If dm-crypt is running with sector size larger than 512b, it allocates more data than is needed. Device Mapper trims the extra space when passing the bio to dm-integrity, so this bug didn't result in any visible misbehavior. But it must be fixed to avoid wasteful memory allocation for the block integrity payload. Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # 4.12+ Reported-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-10dm crypt: fix parsing of extended IV argumentsMilan Broz1-8/+17
The dm-crypt cipher specification in a mapping table is defined as: cipher[:keycount]-chainmode-ivmode[:ivopts] or (new crypt API format): capi:cipher_api_spec-ivmode[:ivopts] For ESSIV, the parameter includes hash specification, for example: aes-cbc-essiv:sha256 The implementation expected that additional IV option to never include another dash '-' character. But, with SHA3, there are names like sha3-256; so the mapping table parser fails: dmsetup create test --table "0 8 crypt aes-cbc-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" or (new crypt API format) dmsetup create test --table "0 8 crypt capi:cbc(aes)-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" device-mapper: crypt: Ignoring unexpected additional cipher options device-mapper: table: 253:0: crypt: Error creating IV device-mapper: ioctl: error adding target to table Fix the dm-crypt constructor to ignore additional dash in IV options and also remove a bogus warning (that is ignored anyway). Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ...
2018-12-28Merge tag 'for-4.21/dm-changes' of ↵Linus Torvalds1-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Eliminate a couple indirect calls from bio-based DM core. - Fix DM to allow reads that exceed readahead limits by setting io_pages in the backing_dev_info. - A couple code cleanups in request-based DM. - Fix various DM targets to check for device sector overflow if CONFIG_LBDAF is not set. - Use u64 instead of sector_t to store iv_offset in DM crypt; sector_t isn't large enough on 32bit when CONFIG_LBDAF is not set. - Performance fixes to DM's kcopyd and the snapshot target focused on limiting memory use and workqueue stalls. - Fix typos in the integrity and writecache targets. - Log which algorithm is used for dm-crypt's encryption and dm-integrity's hashing. - Fix false -EBUSY errors in DM raid target's handling of check/repair messages. - Fix DM flakey target's corrupt_bio_byte feature to reliably corrupt the Nth byte in a bio's payload. * tag 'for-4.21/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: do not allow readahead to limit IO size dm raid: fix false -EBUSY when handling check/repair message dm rq: cleanup leftover code from recently removed q->mq_ops branching dm verity: log the hash algorithm implementation dm crypt: log the encryption algorithm implementation dm integrity: fix spelling mistake in workqueue name dm flakey: Properly corrupt multi-page bios. dm: Check for device sector overflow if CONFIG_LBDAF is not set dm crypt: use u64 instead of sector_t to store iv_offset dm kcopyd: Fix bug causing workqueue stalls dm snapshot: Fix excessive memory usage and workqueue stalls dm bufio: update comment in dm-bufio.c dm writecache: fix typo in error msg for creating writecache_flush_thread dm: remove indirect calls from __send_changing_extent_only() dm mpath: only flush workqueue when needed dm rq: remove unused arguments from rq_completed() dm: avoid indirect call in __dm_make_request
2018-12-28mm: convert totalram_pages and totalhigh_pages variables to atomicArun KS1-1/+1
totalram_pages and totalhigh_pages are made static inline function. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Suggested-by: Michal Hocko <mhocko@suse.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-18dm crypt: log the encryption algorithm implementationEric Biggers1-0/+9
Log the encryption algorithm's driver name when a dm-crypt target is created. This will help people determine whether the expected implementation is being used. In some cases we've seen people do benchmarks and reject using encryption for performance reasons, when in fact they used a much slower implementation than was possible on the hardware. It can make an enormous difference; e.g., AES-XTS on ARM can be over 10x faster with the crypto extensions than without. It can also be useful to know if an implementation using an external crypto accelerator is being used instead of a software implementation. Example message: [ 29.307629] device-mapper: crypt: xts(aes) using implementation "xts-aes-ce" We've already found the similar message in fs/crypto/keyinfo.c to be very useful. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-18dm: Check for device sector overflow if CONFIG_LBDAF is not setMilan Broz1-1/+1
Reference to a device in device-mapper table contains offset in sectors. If the sector_t is 32bit integer (CONFIG_LBDAF is not set), then several device-mapper targets can overflow this offset and validity check is then performed on a wrong offset and a wrong table is activated. See for example (on 32bit without CONFIG_LBDAF) this overflow: # dmsetup create test --table "0 2048 linear /dev/sdg 4294967297" # dmsetup table test 0 2048 linear 8:96 1 This patch adds explicit check for overflow if the offset is sector_t type. Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-18dm crypt: use u64 instead of sector_t to store iv_offsetAliOS system security1-3/+3
The iv_offset in the mapping table of crypt target is a 64bit number when IV algorithm is plain64, plain64be, essiv or benbi. It will be assigned to iv_offset of struct crypt_config, cc_sector of struct convert_context and iv_sector of struct dm_crypt_request. These structures members are defined as a sector_t. But sector_t is 32bit when CONFIG_LBDAF is not set in 32bit kernel. In this situation sector_t is not big enough to store the 64bit iv_offset. Here is a reproducer. Prepare test image and device (loop is automatically allocated by cryptsetup): # dd if=/dev/zero of=tst.img bs=1M count=1 # echo "tst"|cryptsetup open --type plain -c aes-xts-plain64 \ --skip 500000000000000000 tst.img test On 32bit system (use IV offset value that overflows to 64bit; CONFIG_LBDAF if off) and device checksum is wrong: # dmsetup table test --showkeys 0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 3551657984 7:0 0 # sha256sum /dev/mapper/test 533e25c09176632b3794f35303488c4a8f3f965dffffa6ec2df347c168cb6c19 /dev/mapper/test On 64bit system (and on 32bit system with the patch), table and checksum is now correct: # dmsetup table test --showkeys 0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 500000000000000000 7:0 0 # sha256sum /dev/mapper/test 5d16160f9d5f8c33d8051e65fdb4f003cc31cd652b5abb08f03aa6fce0df75fc /dev/mapper/test Signed-off-by: AliOS system security <alios_sys_security@linux.alibaba.com> Tested-and-Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-11-20crypto: drop mask=CRYPTO_ALG_ASYNC from 'cipher' tfm allocationsEric Biggers1-1/+1
'cipher' algorithms (single block ciphers) are always synchronous, so passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no effect. Many users therefore already don't pass it, but some still do. This inconsistency can cause confusion, especially since the way the 'mask' argument works is somewhat counterintuitive. Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-18dm crypt: make workqueue names device-specificMichał Mirosław1-5/+10
Make cpu-usage debugging easier by naming workqueues per device. Example ps output: root 413 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd_io/253:0] root 414 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd/253:0] root 415 0.0 0.0 0 0 ? S paź02 1:10 [dmcrypt_write/253:0] root 465 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd_io/253:2] root 466 0.0 0.0 0 0 ? I< paź02 0:00 [kcryptd/253:2] root 467 0.0 0.0 0 0 ? S paź02 2:06 [dmcrypt_write/253:2] root 15359 0.2 0.0 0 0 ? I< 19:43 0:25 [kworker/u17:8-kcryptd/253:0] root 16563 0.2 0.0 0 0 ? I< 20:10 0:18 [kworker/u17:0-kcryptd/253:2] root 23205 0.1 0.0 0 0 ? I< 21:21 0:04 [kworker/u17:4-kcryptd/253:0] root 13383 0.1 0.0 0 0 ? I< 21:32 0:02 [kworker/u17:2-kcryptd/253:2] root 2610 0.1 0.0 0 0 ? I< 21:42 0:01 [kworker/u17:12-kcryptd/253:2] root 20124 0.1 0.0 0 0 ? I< 21:56 0:01 [kworker/u17:1-kcryptd/253:2] Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-06dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlockMikulas Patocka1-5/+5
There's a XFS on dm-crypt deadlock, recursing back to itself due to the crypto subsystems use of GFP_KERNEL, reported here: https://bugzilla.kernel.org/show_bug.cgi?id=200835 * dm-crypt calls crypt_convert in xts mode * init_crypt from xts.c calls kmalloc(GFP_KERNEL) * kmalloc(GFP_KERNEL) recurses into the XFS filesystem, the filesystem tries to submit some bios and wait for them, causing a deadlock Fix this by updating both the DM crypt and integrity targets to no longer use the CRYPTO_TFM_REQ_MAY_SLEEP flag, which will change the crypto allocations from GFP_KERNEL to GFP_ATOMIC, therefore they can't recurse into a filesystem. A GFP_ATOMIC allocation can fail, but init_crypt() in xts.c handles the allocation failure gracefully - it will fall back to preallocated buffer if the allocation fails. The crypto API maintainer says that the crypto API only needs to allocate memory when dealing with unaligned buffers and therefore turning CRYPTO_TFM_REQ_MAY_SLEEP off is safe (see this discussion: https://www.redhat.com/archives/dm-devel/2018-August/msg00195.html ) Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-08-13dm crypt: don't decrease device limitsMikulas Patocka1-5/+5
dm-crypt should only increase device limits, it should not decrease them. This fixes a bug where the user could creates a crypt device with 1024 sector size on the top of scsi device that had 4096 logical block size. The limit 4096 would be lost and the user could incorrectly send 1024-I/Os to the crypt device. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-27dm crypt: convert essiv from ahash to shashKees Cook1-17/+14
In preparing to remove all stack VLA usage from the kernel[1], remove the discouraged use of AHASH_REQUEST_ON_STACK in favor of the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash to direct shash. The stack allocation will be made a fixed size in a later patch to the crypto subsystem. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-07-27dm crypt: use wake_up_process() instead of a wait queueMikulas Patocka1-15/+10
This is a small simplification of dm-crypt - use wake_up_process() instead of a wait queue in a case where only one process may be waiting. dm-writecache uses a similar pattern. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-2/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-08dm: adjust structure members to improve alignmentMike Snitzer1-13/+13
Eliminate most holes in DM data structures that were modified by commit 6f1c819c21 ("dm: convert to bioset_init()/mempool_init()"). Also prevent structure members from unnecessarily spanning cache lines. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-06-02dm-crypt: fix warning in shutdown pathKent Overstreet1-4/+3
The counter for the number of allocated pages includes pages in the mempool's reserve, so checking that the number of allocated pages is 0 needs to happen after we exit the mempool. Fixes: 6f1c819c219f ("dm: convert to bioset_init()/mempool_init()") Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mike Snitzer <snitzer@redhat.com> Fixed to always just use percpu_counter_sum() Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30dm: convert to bioset_init()/mempool_init()Kent Overstreet1-32/+28
Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-03dm crypt: limit the number of allocated pagesMikulas Patocka1-1/+65
dm-crypt consumes an excessive amount memory when the user attempts to zero a dm-crypt device with "blkdiscard -z". The command "blkdiscard -z" calls the BLKZEROOUT ioctl, it goes to the function __blkdev_issue_zeroout, __blkdev_issue_zeroout sends a large amount of write bios that contain the zero page as their payload. For each incoming page, dm-crypt allocates another page that holds the encrypted data, so when processing "blkdiscard -z", dm-crypt tries to allocate the amount of memory that is equal to the size of the device. This can trigger OOM killer or cause system crash. Fix this by limiting the amount of memory that dm-crypt allocates to 2% of total system memory. This limit is system-wide and is divided by the number of active dm-crypt devices and each device receives an equal share. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm: allow targets to return output from messages they are sentMike Snitzer1-1/+2
Could be useful for a target to return stats or other information. If a target does DMEMIT() anything to @result from its .message method then it must return 1 to the caller. Signed-off-By: Mike Snitzer <snitzer@redhat.com>
2018-01-31Merge tag 'for-4.16/dm-changes' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - DM core fixes to ensure that bio submission follows a depth-first tree walk; this is critical to allow forward progress without the need to use the bioset's BIOSET_NEED_RESCUER. - Remove DM core's BIOSET_NEED_RESCUER based dm_offload infrastructure. - DM core cleanups and improvements to make bio-based DM more efficient (e.g. reduced memory footprint as well leveraging per-bio-data more). - Introduce new bio-based mode (DM_TYPE_NVME_BIO_BASED) that leverages the more direct IO submission path in the block layer; this mode is used by DM multipath and also optimizes targets like DM thin-pool that stack directly on NVMe data device. - DM multipath improvements to factor out legacy SCSI-only (e.g. scsi_dh) code paths to allow for more optimized support for NVMe multipath. - A fix for DM multipath path selectors (service-time and queue-length) to select paths in a more balanced way; largely academic but doesn't hurt. - Numerous DM raid target fixes and improvements. - Add a new DM "unstriped" target that enables Intel to workaround firmware limitations in some NVMe drives that are striped internally (this target also works when stacked above the DM "striped" target). - Various Documentation fixes and improvements. - Misc cleanups and fixes across various DM infrastructure and targets (e.g. bufio, flakey, log-writes, snapshot). * tag 'for-4.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (69 commits) dm cache: Documentation: update default migration_throttling value dm mpath selector: more evenly distribute ties dm unstripe: fix target length versus number of stripes size check dm thin: fix trailing semicolon in __remap_and_issue_shared_cell dm table: fix NVMe bio-based dm_table_determine_type() validation dm: various cleanups to md->queue initialization code dm mpath: delay the retry of a request if the target responded as busy dm mpath: return DM_MAPIO_DELAY_REQUEUE if QUEUE_IO or PG_INIT_REQUIRED dm mpath: return DM_MAPIO_REQUEUE on blk-mq rq allocation failure dm log writes: fix max length used for kstrndup dm: backfill missing calls to mutex_destroy() dm snapshot: use mutex instead of rw_semaphore dm flakey: check for null arg_name in parse_features() dm thin: extend thinpool status format string with omitted fields dm thin: fixes in thin-provisioning.txt dm thin: document representation of <highest mapped sector> when there is none dm thin: fix documentation relative to low water mark threshold dm cache: be consistent in specifying sectors and SI units in cache.txt dm cache: delete obsoleted paragraph in cache.txt dm cache: fix grammar in cache-policies.txt ...
2018-01-29Merge branch 'for-4.16/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull block updates from Jens Axboe: "This is the main pull request for block IO related changes for the 4.16 kernel. Nothing major in this pull request, but a good amount of improvements and fixes all over the map. This contains: - BFQ improvements, fixes, and cleanups from Angelo, Chiara, and Paolo. - Support for SMR zones for deadline and mq-deadline from Damien and Christoph. - Set of fixes for bcache by way of Michael Lyle, including fixes from himself, Kent, Rui, Tang, and Coly. - Series from Matias for lightnvm with fixes from Hans Holmberg, Javier, and Matias. Mostly centered around pblk, and the removing rrpc 1.2 in preparation for supporting 2.0. - A couple of NVMe pull requests from Christoph. Nothing major in here, just fixes and cleanups, and support for command tracing from Johannes. - Support for blk-throttle for tracking reads and writes separately. From Joseph Qi. A few cleanups/fixes also for blk-throttle from Weiping. - Series from Mike Snitzer that enables dm to register its queue more logically, something that's alwways been problematic on dm since it's a stacked device. - Series from Ming cleaning up some of the bio accessor use, in preparation for supporting multipage bvecs. - Various fixes from Ming closing up holes around queue mapping and quiescing. - BSD partition fix from Richard Narron, fixing a problem where we can't mount newer (10/11) FreeBSD partitions. - Series from Tejun reworking blk-mq timeout handling. The previous scheme relied on atomic bits, but it had races where we would think a request had timed out if it to reused at the wrong time. - null_blk now supports faking timeouts, to enable us to better exercise and test that functionality separately. From me. - Kill the separate atomic poll bit in the request struct. After this, we don't use the atomic bits on blk-mq anymore at all. From me. - sgl_alloc/free helpers from Bart. - Heavily contended tag case scalability improvement from me. - Various little fixes and cleanups from Arnd, Bart, Corentin, Douglas, Eryu, Goldwyn, and myself" * 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits) block: remove smart1,2.h nvme: add tracepoint for nvme_complete_rq nvme: add tracepoint for nvme_setup_cmd nvme-pci: introduce RECONNECTING state to mark initializing procedure nvme-rdma: remove redundant boolean for inline_data nvme: don't free uuid pointer before printing it nvme-pci: Suspend queues after deleting them bsg: use pr_debug instead of hand crafted macros blk-mq-debugfs: don't allow write on attributes with seq_operations set nvme-pci: Fix queue double allocations block: Set BIO_TRACE_COMPLETION on new bio during split blk-throttle: use queue_is_rq_based block: Remove kblockd_schedule_delayed_work{,_on}() blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly() lib/scatterlist: Fix chaining support in sgl_alloc_order() blk-throttle: track read and write request individually block: add bdev_read_only() checks to common helpers block: fail op_is_write() requests to read-only partitions blk-throttle: export io_serviced_recursive, io_service_bytes_recursive ...
2018-01-17dm: backfill missing calls to mutex_destroy()Mike Snitzer1-0/+2
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-17dm crypt: fix error return code in crypt_ctr()Wei Yongjun1-0/+1
Fix to return error code -ENOMEM from the mempool_create_kmalloc_pool() error handling case instead of 0, as done elsewhere in this function. Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-17dm crypt: wipe kernel key copy after IV initializationOndrej Kozina1-4/+8
Loading key via kernel keyring service erases the internal key copy immediately after we pass it in crypto layer. This is wrong because IV is initialized later and we use wrong key for the initialization (instead of real key there's just zeroed block). The bug may cause data corruption if key is loaded via kernel keyring service first and later same crypt device is reactivated using exactly same key in hexbyte representation, or vice versa. The bug (and fix) affects only ciphers using following IVs: essiv, lmk and tcw. Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service") Cc: stable@vger.kernel.org # 4.10+ Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-17dm crypt: fix crash by adding missing check for auth key sizeMilan Broz1-1/+6
If dm-crypt uses authenticated mode with separate MAC, there are two concatenated part of the key structure - key(s) for encryption and authentication key. Add a missing check for authenticated key length. If this key length is smaller than actually provided key, dm-crypt now properly fails instead of crashing. Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # 4.12+ Reported-by: Salah Coronya <salahx@yahoo.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-06dm-crypt: don't clear bvec->bv_page in crypt_free_buffer_pages()Ming Lei1-1/+0
The bio is always freed after running crypt_free_buffer_pages(), so it isn't necessary to clear bv->bv_page. Cc: Mike Snitzer <snitzer@redhat.com> Cc:dm-devel@redhat.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-13dm crypt: remove BIOSET_NEED_RESCUER flagNeilBrown1-2/+1
The BIOSET_NEED_RESCUER flag is only needed when a make_request_fn might do two allocations from the one bioset, and the second one could block until the first bio completes. dm-crypt does allocate from this bioset inside the dm make_request_fn, but does so using GFP_NOWAIT so that the allocation will not block. So BIOSET_NEED_RESCUER is not needed. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-10dm crypt: allow unaligned bv_offsetMikulas Patocka1-2/+2
When slub_debug is enabled kmalloc returns unaligned memory. XFS uses this unaligned memory for its buffers (if an unaligned buffer crosses a page, XFS frees it and allocates a full page instead - see the function xfs_buf_allocate_memory). dm-crypt checks if bv_offset is aligned on page size and these checks fail with slub_debug and XFS. Fix this bug by removing the bv_offset checks. Switch to checking if bv_len is aligned instead of bv_offset (this check should be sufficient to prevent overruns if a bio with too small bv_len is received). Fixes: 8f0009a22517 ("dm crypt: optionally support larger encryption sector size") Cc: stable@vger.kernel.org # v4.12+ Reported-by: Bruno Prémont <bonbons@sysophe.eu> Tested-by: Bruno Prémont <bonbons@sysophe.eu> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-10-04dm crypt: reject sector_size feature if device length is not aligned to itMilan Broz1-0/+4
If a crypt mapping uses optional sector_size feature, additional restrictions to mapped device segment size must be applied in constructor, otherwise the device activation will fail later. Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-28dm crypt: fix memory leak in crypt_ctr_cipher_old()Jeffy Chen1-0/+1
Fix memory leak of cipher_api. Fixes: 33d2f09fcb35 (dm crypt: introduce new format of cipher with "capi:" prefix) Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-14Merge tag 'for-4.14/dm-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+2
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-08-28dm: constify argument arraysEric Biggers1-1/+1
The arrays of 'struct dm_arg' are never modified by the device-mapper core, so constify them so that they are placed in .rodata. (Exception: the args array in dm-raid cannot be constified because it is allocated on the stack and modified.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig1-2/+2
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-09dm-crypt: don't mess with BIP_BLOCK_INTEGRITYChristoph Hellwig1-3/+0
This flag is never set right after calling bio_integrity_alloc, so don't clear it and confuse the reader. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>